Nanoparticle formation of poorly water-soluble drugs from ternary ground mixtures with PVP and SDS

Poorly water-soluble drugs N-5159, griseofulvin (GFV), glibenclamide (GBM) and nifedipine (NFP) were ground in a dry process with polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS). Different crystallinity behavior of each drug during grinding was shown in the ternary Drug/PVP/SDS system. However, when each ternary Drug/PVP/SDS ground mixture was added to distilled water, crystalline nanoparticles which were 200 nm or less in size were formed and had excellent stability. Zeta potential measurement suggested that the nanoparticles had a structure where SDS was adsorbed onto the particles that were formed by the adsorption of PVP on the surface of drug crystals. Stable existence of crystalline nanoparticles was attributable to the inhibition of aggregation caused by the adsorption of PVP and SDS on the surface of drug crystals. Furthermore, the electrostatic repulsion due to the negative charge of SDS on a shell of nanoparticles could be assumed to contribute to the stable dispersion.     

PVP-b-PLA修饰Fe_3O_4磁性纳米粒子的制备与表征

通过硅烷偶联剂与Fe3O4磁性纳米粒子偶合在其表面引入C C端基,进一步与N-乙烯基吡咯烷酮(NVP)加成聚合制备含端羟基PVP包裹的磁体,再引发丙交酯(LA)开环聚合制得PVP-b-PLA修饰的Fe3O4纳米粒子.通过XRD、GPC、FTIR、SEM、TG、DSC和激光粒度仪等,对产物进行分析和表征,结果表明,纳米Fe3O4与PVP以及PVP与PLA之间均为化学键联,PVP和PLA是以嵌段共聚物的形式存在且两者之间存在明显的微相分离,纳米Fe3O4表面聚合物包覆率为35%,厚度约13 nm.此外,该PVP-b-PLA包覆的磁性纳米粒子比饱和磁化强度为53 emu/g,与未包覆相比下降约25%.     

Cu nanoparticles of low polydispersity synthesized by a double-template method and their stability

Cu nanoparticles of well-defined size and stability were synthesized with the aid of a double-template method. The templates consisted of sodium dodecyl sulfate (SDS) aggregates combined with and wrapped by poly(vinylpyrrolidone) (PVP) chains. Copper sulfate was reduced within the templates resulting in multicrystalline Cu nanoparticles. The size of the particles was uniform. They were capped by PVP–SDS complexes and the shape turned out to be non-spherical. PVP used in the experiments has an average molecular weight of 40,000. In this case, the particle dimensions were essentially determined by the chosen concentration of SDS in the reaction solution. No oxidation of the as-grown copper particles was detected even in the absence of inert gas protection during the synthesis process. When exposed to air at room temperature, Cu nanoparticles capped by PVP–SDS complexes showed much better resistance to oxidation than those without the capping agents. Furthermore, the steric and screening effect of the capping agents permitted the preparation of uniform colloidal dispersions stable over months. The material obtained by this double-template method was found to be very sensitive to the synthesis temperature. At synthesis temperatures above 40 °C, CuO instead of Cu was obtained.     

Estimation of dielectric function of biotin-capped gold nanoparticles via signal enhancement on surface plasmon resonance

Biotin-capped gold nanoparticles assembled on flat gold with volume fraction f are studied by surface plasmon resonance (SPR) spectroscopy and atomic force microscopy (AFM) in order to estimate the dielectric function of the gold nanoparticles based on the Maxwell-Garnett (MG) theory. The complex dielectric function (epsilon',epsilon') of the spherical nanoparticles at three representative wavelengths in the vis-near-IR region, i.e., lambda = 543, 632.8, and 1152 nm, is estimated for a surface homogeneously covered with nanoparticles in order to discuss the wavelength dependence of the dielectric function. The SPR response of a surface covered with particles in 2D aggregates is also analyzed. The experimental SPR curve of the particle aggregates deviates from the theoretical predictions, suggesting dipole interactions between particles.     

Association between branched poly(ethyleneimine) and sodium dodecyl sulfate in the presence of neutral polymers

In the present paper, the effect of different neutral polymers on the self-assemblies of hyperbranched poly(ethyleneimine) (PEI) and sodium dodecyl sulfate (SDS) has been investigated at different ionization degrees of the polyelectrolyte molecules. The investigated uncharged polymers were poly(ethyleneoxide), poly(vinylpyrrolidone) and dextran samples of different molecular mass. Dynamic light scattering and electrophoretic mobility measurements demonstrate that the high molecular mass PEO or PVP molecules adsorb considerably onto the surface of the PEI/SDS nanoparticles. At appropriate concentrations of PVP or PEO, sterically stabilized colloidal dispersions of the polyelectrolyte/surfactant nanoparticles with hydrophobic core and hydrophilic corona can be prepared. These dispersions have considerable kinetic stability at high ionic strengths where the accelerated coagulation of the PEI/SDS nanoparticles results in precipitation in the absence of the neutral polymers. In contrast, the addition of dextran does not affect considerably the kinetic stability of PEI/SDS mixtures because of its low adsorption affinity towards the surface of the polyelectrolyte/surfactant nanoparticles.     

Study on surfactant coating of polymeric nanoparticles for controlled delivery of anticancer drug

Biodegradable nanoparticles loaded with anticancer drug paclitaxel and appropriately coated with polyvinyl alcohol (PVA), polyethylene glycol (PEG) as well as d--tocopheryl polyethylene glycol 1000 succinate (TPGS) were produced and characterised by various analysis techniques such as laser light scattering (LLS) for particle size and size distribution, scanning electron microscopy (SEM) and atomic force microscopy (AFM) for particle morphology, X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared-Photoacoustic Spectroscopy (FTIR-PAS) for surface chemistry, and high performance liquid chromatography (HPLC) for drug encapsulation efficiency (EE) and in vitro release kinetics. The emphasis was given to the possible effects of surface coating on the physicochemical and pharmaceutical properties of paclitaxel loaded nanoparticles. It was found that the type and amount of the surfactant could significantly affect the drug EE in the nanoparticles, the particles characteristics and their in vitro release behaviour. The surfactants dominated on the nanoparticles surface and the coated nanoparticles displayed in spherical shape with relative smooth surface within the resolution scope of the equipment. The particle size and size distribution showed close relation to the surface coating, which may also be responsible for the drug encapsulation efficiency and the in vitro release kinetics. A favourable formulation of drug loaded nanoparticles of desired properties could be obtained by optimising the fabrication parameters.     

Nanotechnological evaluation of protein adsorption on dialysis membrane surface hydrophilized with polyvinylpyrrolidone

Hydrophilizing synthetic polymer dialysis membranes with polyvinylpyrrolidone (PVP) play an important role for inhibition of protein adsorption on membrane surface. In the present study, the effect of PVP on protein adsorption was evaluated from a nano-scale perspective. Swelling behavior of PVP present on wet polysulfone (PS)/PVP film surfaces was observed by atomic force microscopy (AFM). Fibrinogen and human serum albumin (HSA) were immobilized on the tip of AFM probes, with which a force-curve between protein and wet PS/PVP film surface was measured by AFM while scanning in order to visualize two-dimensional protein adsorbability on film surfaces. Furthermore, HSA adsorbability on non-PVP containing PEPA dialysis membrane (FLX-15GW) and PVP containing PEPA dialysis membrane (FDX-150GW) was evaluated by the AFM force-curve method. As a result, PS/PVP film surface was completely covered with hydrated and swollen PVP at 5 wt% or more PVP content. Protein adsorbability on PS/PVP film surfaces decreased greatly with increasing content of PVP. The adsorption of HSA was inhibited by the presence of PVP on film surfaces more significantly than that of more hydrophobic fibrinogen. HSA adsorbability on wet FLX-15GW dialysis membrane surface was 428 ± 174 pN whereas that on wet FDX-150GW dialysis membrane surface was 42 ± 29 pN.     

Characterization and surface reactivity of ferrihydrite nanoparticles assembled in ferritin

Ferrihydrite nanoparticles with nominal sizes of 3 and 6 nm were assembled within ferritin, an iron storage protein. The crystallinity and structure of the nanoparticles (after removal of the protein shell) were evaluated by high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). HRTEM showed that amorphous and crystalline nanoparticles were copresent, and the degree of crystallinity improved with increasing size of the particles. The dominant phase of the crystalline nanoparticles was ferrihydrite. Morphology and electronic structure of the nanoparticles were characterized by AFM and STM. Scanning tunneling spectroscopy (STS) measurements suggested that the band gap associated with the 6 nm particles was larger than the band gap associated with the 3 nm particles. Interaction of SO2(g) with the nanoparticles was investigated by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and results were interpreted with the aid of molecular orbital/density functional theory (MO/DFT) frequency calculations. Reaction of SO2(g) with the nanoparticles resulted primarily in SO(3)2- surface species. The concentration of SO3(2-) appeared to be dependent on the ferrihydrite particle size (or differences in structural properties).     

Estimation of heterogeneous surface structure of submicron-sized,composite polymer particles consisting of hydrophobic and hydrophilic components by atomic force microscopy*

Surface structure of submicron-sized poly(styrene/2-hydroxyethyl methacrylate) [P(S/HEMA)] composite particles produced by emulsifier-free emulsion polymerization was estimated with atomic force microscopy (AFM). AFM force curves were measured in water at different points of the particle surface; it was clarified that the particle surface had a heterogeneous structure consisting of hard and soft parts, which must be, respectively, based on styrene-rich and 2-hydroxyethyl methacrylate-rich parts.     

Dependency of particle sizes and colloidal stability of polyelectrolyte complex dispersions on polyanion structure and preparation mode investigated by dynamic light scattering and atomic force microscopy

Polyelectrolyte complex (PEC) dispersions were prepared by controlled mixing of three random copolymers of sodium 2-acrylamido-2-methylpropanesulfonate (AMPS) with either t-butyl acrylamide (TBA) [P(AMPS54-co-TBA46) and P(AMPS37-co-TBA63)] or methyl methacrylate (MM) [P(AMPS52-co-MM48)] with an ionene-type polycation, containing 95 mol % N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA5), with their structural characteristics being deeply investigated by dynamic light scattering (DLS) and atomic force microscopy (AFM). Shape, size, and polydispersity of the PEC dispersions were directly observed by AFM as a function of polyanion structure, the ratio between charges, n-/n+, and the titrant addition rate (TAR). The particle sizes increased and the colloidal stability decreased with the increase of the nonionic comonomer content and with the decrease of TAR. It was demonstrated that the medium particle sizes of the complex nanoparticles adsorbed on silicon wafers measured by AFM, in the dry state, were close but always lower than those measured by DLS, both before and after the complex stoichiometry.     

PVP和SDS在固液界面上的混合吸附

实验测定了PVP和SDS自其混合溶液在碳黑及TiO₂表面上的吸附。在TiO₂表面上,当溶液中SDS的浓度低于4×10^-3mol·dm^-2时,PVP与SDS的吸附互相增强;当SDS的浓度更高时,则彼此对抗。在碳黑表面上,SDS与PVP表现为单纯的竞争吸附。根据SDS与PVP之间复合物的形成和吸附剂的表面性质讨论了实验结果。     

Preparation of ultrathin coating layers using surface modified silica nanoparticles

Silica nanoparticles are used in various applications including catalysts, paints and coatings. To reach an optimal performance via stability and functionality, in most cases, the surface properties of the particles are altered using complex procedures. Here we describe a simple method for surface modification of silica nanoparticles (SNP) using sequential adsorption of oppositely charged components. First, the SNPs were made cationic by adsorption of a cationic polyelectrolyte. Poly(allylamine hydrochloride) (PAH) and polyethyleneimine (PEI) were chosen as polycations to investigate the difference between a linear and a branched polyelectrolyte. Next, the dispersion of cationic SNPs was combined with an anionic alkyl ketene dimer (AKD) emulsion. Using this approach cationic, hydrophobic silica particle dispersions were produced. Dynamic light scattering, contact angle measurements and atomic force microscopy (AFM) were used for analyzing the particle and coating layer properties. The chosen polyelectrolyte affected the structure of the dispersion. The layer build-up was studied in detail using a quartz crystal microbalance with dissipation monitoring (QCM-D). The adsorption and layer properties of the cationic polyelectrolytes adsorbed on silica as well as the affinity of AKD to this layer were explored. The application possibilities of the modified particle dispersions were demonstrated by preparing paper and silica surfaces with tailored properties, such as elevated surface hydrophobicity, using an ultrathin coating layer.     

SDS与PVP对碘化银溶胶稳定性的影响

研究了SDS、PVP及二者的混合物对AgI溶胶稳定性的影响。SDS主要通过表面活性负离子在AgI质点表面上的吸附使ζ电势升高,提高溶胶的稳定性。低浓度的PVP使AgI溶胶敏化,高浓度时又通过吸附层的空间稳定效应使其稳定。在PVP与SDS的混合溶液中,AgI溶胶的稳定性显著增加。根据PVP与SDS在固液界面上的相互作用讨论了这一增效作用。     

LB技术制备FePt纳米粒子单层膜

FePt纳米粒子由于具有高的矫顽力而成为高密度垂直磁记录材料的研究热点之一,均匀有序排布的FePt纳米粒子薄膜将有利于提高磁记录介质的记录密度,因此,如何使FePt纳米颗粒均匀有序地排布是当前需要解决的关键问题之一,很多研究小组利用磁控溅射、自组装和电沉积等方法对FePt纳米颗粒的均匀分布进行了详细的研究,     

Adhesion force studies of Janus nanoparticles

Janus nanoparticles represent a unique nanoscale analogue to the conventional surfactant molecules, exhibiting hydrophobic characters on one side and hydrophilic characters on the other. Yet, direct visualization of the asymmetric surface structures of the particles remains a challenge. In this paper, we used a simple technique based on AFM adhesion force measurements to examine the two distinctly different hemispheres of the Janus particles at the molecular level. Experimentally, the Janus nanoparticles were prepared by ligand exchange reactions at the air-water interface. The particles were then immobilized onto a substrate surface with the particle orientation controlled by the chemical functionalization of the substrate surface, and an AFM adhesion force was employed to measure the interactions between the tip of a bare silicon probe and the Janus nanoparticles. It was found that when the hydrophilic side of the particles was exposed, the adhesion force was substantially greater than that with the hydrophobic side exposed, as the silicon probes typically exhibit hydrophilic properties. These studies provide further confirmation of the amphiphilic nature of the Janus nanoparticles.     

Effect of particle size on surface modification of silica nanoparticles by using silane coupling agents and their dispersion stability in methylethylketone

The effect of particle size on the reactivity of hexyltrimethoxysilane (C6S) with the particle surface was studied by using silica nanoparticles (SNPs) with different diameters (30 or 200 nm). In case of 30-nm SNPs, a large amount of isolated silanol was observed. On the other hand, in the case of 200-nm SNPs, the amount of hydrogen bonded silanol and hydrogen bonded water molecules at the surface of the SNPs increased. Since the hydrogen bonded silanol and the hydrogen bonded water enhanced the reaction of C6S with SNPs, the chemisorbed C6S on 200-nm SNPs was larger than that on 30-nm SNPs. Furthermore, the effects of surface modification on the dispersion stability in MEK were studied using viscosity measurements and surface force measurements by the AFM colloid probe method. The viscosity of the dilute SNPs/MEK suspension did not change by the chemisorptions of C6S; however, the viscosity of dense suspension reduced effectively by surface modification. It was estimated that the suspension viscosity reduced effectively when the mean particle surface distance in the suspension was near to the distance where the repulsive force appeared by the surface force measurements using the colloid probe AFM.     

Synthesis and characterization of chitosan–polyvinylpyrrolidone–bovine serum albumin-coated magnetic iron oxide nanoparticles as potential carrier for delivery of tamoxifen

The proposed study examined the preparation of chitosan (CS)–polyvinylpyrrolidone (PVP)–bovine serum albumin (BSA)-coated magnetic iron oxide (Fe₃O₄) nanoparticles (Fe₃O₄–CS–PVP–BSA) to use as potential drug delivery carriers for delivery of tamoxifen drug (TAM) . The anticancer drug selected in this study was tamoxifen which can be used for the human breast cancer treatment. These prepared nanoparticles were characterized by FTIR, XRD, SEM, AFM, TEM, CD and VSM techniques. The swelling studies have been measured at different (10, 20, 30, 40, 50%) drug loading. The mean particle size of the tamoxifen-loaded nanoparticles system (Fe₃O₄–CS–TAM, Fe₃O₄–CS–TAM–PVP and Fe₃O₄–CS–TAM–PVP–BSA) as measured by Malvern Zetasizer ranged between 350 ± 2.3 and 601 ± 1.7 nm. As well as these drug-loaded nanoparticles were positively charged. The zeta potential was in the range of 28.9 ± 3.5 and 50.8 ± 3.9 mV. The encapsulation efficiency was between 63.60 ± 2.11 and 96.45 ± 2.12%. Furthermore, in vitro release and drug loading efficiency from the nanoparticles were investigated. The cytotoxicity of prepared nanoparticles was verified by MTT assay. In vitro release studies were executed in 4.0 and 7.4 pH media to simulate the intestinal and gastric conditions and different temperature (37 and 42 °C). Hence, the prepared tamoxifen-loaded nanoparticles system (Fe₃O₄–CS–TAM, Fe₃O₄–CS–TAM–PVP and Fe₃O₄–CS–TAM–PVP–BSA) could be a promising candidate in cancer therapy.     

Role of stabilizing agents in the formation of stable silver nanoparticles in aqueous solution: Characterization and stability study

The stability of silver nanoparticles is controlled mainly by two major factors, namely, aggregation and oxidation. In the present study, silver nanoparticles were synthesized by using different series of reducing agents like a strong reducing agent (sodium borohydride), a mild reducing agent (tri-sodium citrate), and a weak reducing agent (glucose) with different capping agents, namely, polyvinyl pyrrolidone (PVP K 30), starch, and sodium carboxyl methyl cellulose (NaCMC). The synthesized silver nanoparticles were characterized by UV-Visible absorption spectroscopy, dynamic light scattering (DLS), atomic force microscopy (AFM), and anti-microbial activity. The particle size of silver nanoparticles varies in the following order: sodium borohydride < tri-sodium citrate < glucose. Combination of sodium borohydride–polyvinyl pyrrolidone and tri-sodium citrate-polyvinyl pyrrolidone yields stable silver nanoparticles compared to other combinations of reducing agents and capping agents. The stability results confirmed that a refrigerated condition (8°C) was more suitable for storage of silver nanoparticles. Anti-microbial activity of silver nanoparticles synthesized in a sodium borohydride–polyvinyl pyrrolidone mixture shows a larger zone of inhibition compared to other silver nanoparticles. Anti-microbial results confirmed that the anti-microbial activity is better with smaller particle size. The size and stability of silver nanoparticles in the presence of different combinations of stabilizing and capping agents are reported.     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

Creation of highly stable selenium nanoparticles capped with hyperbranched polysaccharide in water

Water-dispersible selenium nanoparticles (SeNPs) were created by using natural hyperbranched polysaccharide (HBP) as the stabilizer and capping agent under extremely safe conditions. The structure, morphology, size, and stability of the nanocomposites were investigated by transmission electron microscopy (TEM), atomic force microscopy (AFM), and static and dynamic light scattering (DLS) measurements. The results revealed that the spherical selenium nanoparticles (mean particle size of about 24 nm) were ligated with HBP to form nanocomposites (Se-HBP) in aqueous solution and were stable for over one month. In our findings, supported by the results of FTIR, TEM, AFM, and DLS, SeNPs were capped with the HBP macromolecules, as a result of strong physical adsorption of OH groups on Se surfaces, leading to a highly stable structure of Se nanoparticles in water. This work provided reaction sites for the complexation between HBP and Se to fabricate well-dispersed Se nanoparticles in aqueous system with potential bioapplications.