The reaction of [FeII(tpa)] with H2O2 in acetonitrile and acetone--distinct intermediates and yet similar catalysis

The reaction of [FeII(tpa)(OTf)2] (tpa=tris(2-pyridylmethyl)amine) and its related 5-Me3-tpa complex with hydrogen peroxide affords spectroscopically distinct iron(III)-peroxo intermediates in CH3CN and acetone. The reaction in acetonitrile at -40 degrees C results in the formation of the previously reported Fe(III)-OOH intermediate, the end-on hydroperoxo coordination mode of which is established in this paper by detailed resonance Raman isotope-labeling experiments. On the other hand, the reaction in acetone below -40 degrees C leads to the observation of a different peroxo intermediate identified by resonance Raman spectroscopy to be an FeIII-OOC (CH3)2OH species; this represents the first example of an intermediate derived from the adduct of H2O2 and acetone. The peroxoacetone intermediate decays more rapidly than the corresponding FeIII-OOH species and converts to an FeIV=O species by O-O bond homolysis. This decay process is analogous to that observed for [FeIII(tpa)(OOtBu)]2+ and in fact exhibits a comparable enthalpy of activation of 54(3) kJ mol(-1). Thus, with respect to their physical properties at low temperature, the peroxoacetone intermediate resembles [FeIII(tpa)(OOtBu)]2+ more than the corresponding FeIII-OOH species. At room temperature, however, the behavior of the Fe(tpa)/H2O2 combination in acetone in catalytic hydrocarbon oxidations differs significantly from that of the Fe(tpa)/tBuOOH combination and more closely matches that of the Fe(tpa)/H2O2 combination in CH3CN. Like the latter, the Fe(tpa)/H2O2 combination in acetone catalyzes the hydroxylation of cis-1,2-dimethylcyclohexane to its tertiary alcohol with high stereoselectivity and carries out the epoxidation and cis-dihydroxylation of olefins. These results demonstrate the subtle complexity of the Fe(tpa)/H2O2 reaction surface.     

Metal-peroxo versus metal-oxo oxidants in non-heme iron-catalyzed olefin oxidations: computational and experimental studies on the effect of water

Computational and experimental studies show that Fe(BPMEN)-catalyzed olefin oxidation has two (FeIII-OOH and FeV=O) oxidant species, which act with comparable activation barriers. The presence of water favors formation of an HO-FeV=O oxidant via water-assisted O-OH bond cleavage and leads to both epoxide and cis-diol products. In the absence of water, the oxidant is the FeIII-OOH [or (MeCN)FeIII-OOH], and oxidation mainly leads to epoxide. This conclusion differs from that derived from DFT investigations of iron-porphyrin-catalyzed olefin epoxidation, where the FeIII-OOH pathway is deemed too high in energy to be plausible. The difference between these two systems may lie in the more flexible coordination environment of the non-heme iron complex, which has an available adjacent coordination site that contributes to the activation of the peroxide in both wa and nwa pathways.     

Synthesis of an Iron(IV) Aqua–Oxido Complex Using Ozone as an Oxidant

The iron(IV) oxido complex [(tmc)Fe=O(OTf)]OTf with the macrocyclic ligand 1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclo‐tetradecane (tmc) has been synthesized using ozone as an oxidant. By adding water to this compound the complex [(H₂O)(tmc)Fe=O)](OTf)₂ could be prepared. This complex is important in regard to a better understanding of the reactivity of Fe^IV oxido complexes. Mössbauer measurements using the solid compound showed an isomer shift of δ=0.19 mm s^?1 and a quadrupole splitting ΔE_Q=1.38 mm s^?1, confirming the high‐valent Fe^IV state. DFT calculations were performed and led to an assignment of triplet spin multiplicity. Crystallographic characterization of [(H₂O)(tmc)Fe=O)](OTf)₂ as well as of starting materials [(tmc)Fe(CH₃CN)](OTf)₂ and [(tmc)Fe(OTf)]OTf together with previous results strongly suggest that [(H₂O)(tmc)Fe=O)](OTf)₂ was formed similar to the oxido–hydroxido tautomerism analogous to heme systems.     

Olefin cis-dihydroxylation with bio-inspired iron catalysts. evidence for an Fe(II)/Fe(IV) catalytic cycle

Iron(II) complexes of a series of N-acylated dipyridin-2-ylmethylamine ligands (R-DPAH) have been investigated as catalysts for the cis-dihydroxylation of olefins to model the action of Rieske dioxygenases that catalyze arene cis-dihydroxylation. The Rieske dioxygenases have a mononuclear iron active site coordinated to a 2-histidine-1-carboxylate facial triad motif. The R-DPAH ligands are designed to provide a facial N,N,O-ligand set that mimics the enzyme active site. The iron(II) complexes of the R-DPAH ligands activate H(2)O(2) to effect the oxidation of olefin substrates into cis-diol products. As much as 90% of the H(2)O(2) oxidant is converted into cis-diol, but a large excess of olefin is required to achieve the high conversion efficiency. Reactivity and mechanistic comparisons with the previously characterized Fe(TPA)/H(2)O(2) catalyst/oxidant combination (TPA = tris(pyridin-2-ylmethyl)amine) lead us to postulate an Fe(II)/Fe(IV) redox cycle for the Fe(R-DPAH) catalysts in which an Fe(IV)(OH)(2) oxidant carries out the cis-hydroxylation of olefins. This hypothesis is supported by three sets of observations: (a) the absence of a lag phase in the conversion of the H(2)O(2) oxidant into a cis-diol product, thereby excluding the prior oxidation of the Fe(II) catalyst to an Fe(III) derivative as established for the Fe(TPA) catalyst; (b) the incorporation of H(2)(18)O into the cis-diol product, thereby requiring O-O bond cleavage to occur prior to cis-diol formation; and (c) the formation of cis-diol as the major product of cyclohexene oxidation, rather than the epoxide or allylic alcohol products more commonly observed in metal-catalyzed oxidations of cyclohexene, implicating an oxidant less prone to oxo transfer or H-atom abstraction.     

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.     

Iron-catalyzed olefin epoxidation in the presence of acetic acid: insights into the nature of the metal-based oxidant

The iron complexes [(BPMEN)Fe(OTf)2] (1) and [(TPA)Fe(OTf)2] (2) [BPMEN = N,N'-bis-(2-pyridylmethyl)-N,N'-dimethyl-1,2-ethylenediamine; TPA = tris-(2-pyridylmethyl)amine] catalyze the oxidation of olefins by H2O2 to yield epoxides and cis-diols. The addition of acetic acid inhibits olefin cis-dihydroxylation and enhances epoxidation for both 1 and 2. Reactions carried out at 0 degrees C with 0.5 mol % catalyst and a 1:1.5 olefin/H2O2 ratio in a 1:2 CH3CN/CH3COOH solvent mixture result in nearly quantitative conversions of cyclooctene to epoxide within 1 min. The nature of the active species formed in the presence of acetic acid has been probed at low temperature. For 2, in the absence of substrate, [(TPA)FeIII(OOH)(CH3COOH)]2+ and [(TPA)FeIVO(NCCH3)]2+ intermediates can be observed. However, neither is the active epoxidizing species. In fact, [(TPA)FeIVO(NCCH3)]2+ is shown to form in competition with substrate oxidation. Consequently, it is proposed that epoxidation is mediated by [(TPA)FeV(O)(OOCCH3)]2+, generated from O-O bond heterolysis of the [(TPA)FeIII(OOH)(CH3COOH)]2+ intermediate, which is promoted by the protonation of the terminal oxygen atom of the hydroperoxide by the coordinated carboxylic acid.     

Factors affecting the catalytic epoxidation of olefins by iron porphyrin complexes and H2O2 in protic solvents

The catalytic epoxidation of cyclohexene by iron(III) porphyrin complexes and H2O2 has been investigated in alcohol solvents to understand factors affecting the catalyst activity in protic solvents. The yields of cyclohexene oxide and the Fe(III/II) reduction potentials of iron porphyrin complexes were significantly affected by the protic solvents, and there was a close correlation between the product yields and the reduction potentials of the iron porphyrin catalysts. The role of alcohol solvents was proposed to control the electronic nature of iron porphyrin complexes that determines the catalyst activity in the epoxidation of olefins by H2O2. We have also demonstrated that an electron-deficient iron porphyrin complex can catalyze the epoxidation of olefins by H2O2 under conditions of limiting substrate with high conversion efficiency in a solvent mixture of CH3OH and CH2Cl2.     

Preparation of Pt@Fe2O3 nanowires and their catalysis of selective oxidation of olefins and alcohols

Iron oxide coated platinum nanowires (Pt@Fe(2)O(3)NWs) with a diameter of 2.8 nm have been prepared by the oxygen oxidation of FePt NWs in oleylamine. These "cable"-like NWs were characterised by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and X-ray absorption fine structure analysis. These Pt@Fe(2)O(3) NWs were used as "non-support" heterogeneous catalysts in oxidation of olefins and alcohols. The results revealed that it is an active and highly selective catalyst. Styrene derivatives were tested with molecular oxygen as the sole oxidant, with benzaldehyde successfully obtained from styrene in an absolute yield of 31%, whereas the use of tert-butyl hydroperoxide as the sole oxidant in the oxidation of alcohols led to yields of more than 80% of the corresponding ketone or aldehyde. This unsupported catalyst was found to be more active (TOF=96.5 h(-1)) than other reported Fe(2)O(3) nanoparticle catalysts and could be recycled multiple times without any notable decrease in activity. Our findings will extend the use of such nanomaterial catalysts to new catalytic systems.     

An efficient biomimetic Fe-catalyzed epoxidation of olefins using hydrogen peroxide

A new, environmentally benign and practical epoxidation method was developed using inexpensive and efficient Fe catalysts. FeCl3.6H2O in combination with commercially available pyridine-2,6-dicarboxylic acid and amines showed excellent reactivity and selectivity towards aromatic olefins and moderate reactivity towards 1,3-cyclooctadiene utilizing H2O2 as the terminal oxidant.     

Ligand topology effects on olefin oxidations by bio-inspired [FeII(N2Py2)] catalysts

Linear tetradentate N2Py2 ligands can coordinate to an octahedral FeII center in three possible topologies (cis-alpha, cis-beta, and trans). While for the N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane (bpmen) complex, only the cis-alpha topology has been observed, for N,N'-bis(2-pyridylmethyl)-1,2-diaminocyclohexane (bpmcn) both cis-alpha and cis-beta isomers have been reported. To date, no facile interconversion between cis-alpha and cis-beta topologies has been observed for ironII complexes even at high temperatures. However, this work provides evidence for facile interconversion in solution of cis-alpha, cis-beta, and trans topologies for [Fe(bpmpn)X2] (bpmpn=N,N'-bis(2-pyridylmethyl)-1,3-diaminopropane; X=triflate, CH3CN) complexes. As reported previously, the catalytic behavior of cis-alpha and cis-beta isomers of [Fe(bpmcn)(OTf)2] with respect to olefin oxidation depends dramatically on the geometry adopted by the iron complex. To establish a general pattern of the catalysis/topology dependence, this work presents an extended comparison of the catalytic behavior for oxidation of olefins of a family of [Fe(N2py2)] complexes that present different topologies. 18O labeling experiments provide evidence for a complex mechanistic landscape in which several pathways should be considered. Complexes with a trans topology catalyze only non-water-assisted epoxidation. In contrast, complexes with a cis-alpha topology, such as [Fe(bpmen)X2] and [Fe(alpha-bpmcn)(OTf)2], can catalyze both epoxidation and cis-dihydroxylation through a water-assisted mechanism. Surprisingly, [Fe(bpmpn)X2] and [Fe(beta-bpmcn)(OTf)2] catalyze epoxidation via a water-assisted pathway and cis-dihydroxylation via a non-water-assisted mechanism, a result that requires two independent and distinct oxidants.     

Dinitrosyl Iron Complex [K-18-crown-6-ether][(NO)2Fe(MePyrCO2)]: Intermediate for Capture and Reduction of Carbon Dioxide

Continued efforts are made for the utilization of CO₂ as a C₁ feedstock for regeneration of valuable chemicals and fuels. Mechanistic study of molecular (electro-/photo-)catalysts disclosed that initial step for CO₂ activation involves either nucleophilic insertion or direct reduction of CO₂. In this study, nucleophilic activation of CO₂ by complex [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂]²⁻ ( 2 , ^MePyr=3-methylpyrazolate) results in the formation of CO₂-captured complex [(NO)₂Fe(^MePyrCO₂)]⁻ ( 2-CO₂ , ^MePyrCO₂=3-methyl-pyrazole-1-carboxylate). Single-crystal structure, spectroscopic, reactivity, and computational study unravels 2-CO₂ as a unique intermediate for reductive transformation of CO₂ promoted by Ca²⁺. Moreover, sequential reaction of 2 with CO₂, Ca(OTf)₂, and KC₈ established a synthetic cycle, 2 → 2-CO₂ → [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂] ( 1 ) → 2 , for selective conversion of CO₂ into oxalate. Presumably, characterization of the unprecedented intermediate 2-CO₂ may open an avenue for systematic evaluation of the effects of alternative Lewis acids on reduction of CO₂.     

Mu-eta1:eta1-peroxo-bridged dinuclear peroxotungstate catalytically active for epoxidation of olefins

The reaction of the dinuclear peroxotungstate, [(n-C4H9)4N]2[{WO(O2)2}2(mu-O)] (II), with H2O2 gives the novel mu-eta1:eta1-peroxo-bridging dinuclear tungsten species, [(n-C4H9)4N]2[{WO(O2)2}2(mu-O2)] (I), which has been characterized by X-ray crystallography, elemental analysis, IR, Raman, UV-vis, and 183W NMR. Only I is active for the epoxidation of cyclic, internal, and terminal olefins, whereas II is inactive for each. The low XSO (XSO=(nucleophilic oxidation)/(total oxidation)) value of I (0.18+/-0.02) in comparison with that of II (0.39+/-0.01) for the stoichiometric oxidation of thianthrene 5-oxide, which is a mechanistic probe for determining the electronic character of an oxidant, reveals that I is more electrophilic than II. On the basis of the kinetic and spectroscopic results, the catalytic epoxidation proceeds by the reaction of I with an olefin to form II and the corresponding epoxide followed by the regeneration of I by the reaction of II with H2O2.     

Monocyclic di- and triphosphinophosphonium cations: new foundational frameworks for catena-phosphorus chemistry

The synthesis and characterization for trifluoromethanesulfonate (triflate) salts of the first definitive examples of cyclotriphosphinophosphonium and cyclodiphosphinophosphonium cations are described, representing new prototypical frameworks in the rational and systematic development of catena-phosphorus chemistry. Addition of methyl triflate (MeOTf) or triflic acid (HOTf) to cyclotetraphosphines (tBuP)4 (1a) or (CyP)4 (1b) gives [(tBuP)3PtBuMe][OTf] (2a[OTf]), [(CyP)3PCyMe][OTf] (2b[OTf]), [(tBuP)3PtBuH][OTf] (3a[OTf]), and [(CyP)3PCyH][OTf] (3b[OTf]), respectively. Cyclotriphosphine (tBuP)3 (4a) reacts with HOTF or Me2PCl/Me3SiOTf to give the ring expanded cations 3a[OTf] and [(tBuP)3PMe2][OTf] (5[OTf]), respectively, but reactions with MeOTf and HCl give cyclic diphosphinophosphonium cation [(tBuP)2PtBuMe][OTf] (6a[OTf]) and ring-opened triphosphine HtBuP-PtBu-PtBuCl (7), respectively. The analogous diphosphinophosphonium cation [(CyP)2PCyMe][OTf] (6b[OTf]) is formed along with 2b[OTf] in reactions of MeOTf with (CyP)3 (4b). Compounds 2a[OTf], 2b[OTf], 3a[OTf], 5[OTf], and 6a[OTf] have been crystallographically characterized. 1H NMR spectra of 2a[OTf], 2b[OTf], 5[OTf], and 6a[OTf] demonstrate that 3JPH coupling is only observed for methyl protons if they are in a cis orientation to the lone pairs on the adjacent phosphine sites.     

Dinitrosyl Iron Complex [K‐18‐crown‐6‐ether][(NO)2Fe(MePyrCO2)]: Intermediate for Capture and Reduction of Carbon Dioxide

Continued efforts are made for the utilization of CO₂ as a C₁ feedstock for regeneration of valuable chemicals and fuels. Mechanistic study of molecular (electro‐/photo‐)catalysts disclosed that initial step for CO₂ activation involves either nucleophilic insertion or direct reduction of CO₂. In this study, nucleophilic activation of CO₂ by complex [(NO)₂Fe(μ‐^MePyr)₂Fe(NO)₂]^2? ( 2 , ^MePyr=3‐methylpyrazolate) results in the formation of CO₂‐captured complex [(NO)₂Fe(^MePyrCO₂)]^? ( 2‐CO₂ , ^MePyrCO₂=3‐methyl‐pyrazole‐1‐carboxylate). Single‐crystal structure, spectroscopic, reactivity, and computational study unravels 2‐CO₂ as a unique intermediate for reductive transformation of CO₂ promoted by Ca²⁺. Moreover, sequential reaction of 2 with CO₂, Ca(OTf)₂, and KC₈ established a synthetic cycle, 2 → 2‐CO₂ → [(NO)₂Fe(μ‐^MePyr)₂Fe(NO)₂] ( 1 ) → 2 , for selective conversion of CO₂ into oxalate. Presumably, characterization of the unprecedented intermediate 2‐CO₂ may open an avenue for systematic evaluation of the effects of alternative Lewis acids on reduction of CO₂.     

A density functional study of O-O bond cleavage for a biomimetic non-heme iron complex demonstrating an Fe(v)-intermediate

Density functional theory using the B3LYP hybrid functional has been employed to investigate the reactivity of Fe(TPA) complexes (TPA = tris(2-pyridylmethyl)amine), which are known to catalyze stereospecific hydrocarbon oxidation when H(2)O(2) is used as oxidant. The reaction pathway leading to O-O bond heterolysis in the active catalytic species Fe(III)(TPA)-OOH has been explored, and it is shown that a high-valent iron-oxo intermediate is formed, where an Fe(V) oxidation state is attained, in agreement with previous suggestions based on experiments. In contrast to the analogous intermediate [(Por.)Fe(IV)=O](+1) in P450, the TPA ligand is not oxidized, and the electrons are extracted almost exclusively from the mononuclear iron center. The corresponding homolytic O-O bond cleavage, yielding the two oxidants Fe(IV)=O and the OH. radical, has also been considered, and it is shown that this pathway is inaccessible in the hydrocarbon oxidation reaction with Fe(TPA) and hydrogen peroxide. Investigations have also been performed for the O-O cleavage in the Fe(III)(TPA)-alkylperoxide species. In this case, the barrier for O-O homolysis is found to be slightly lower, leading to loss of stereospecificity and supporting the experimental conclusion that this is the preferred pathway for alkylperoxide oxidants. The difference between hydroperoxide and alkylperoxide as oxidant derives from the higher O-O bond strength for hydrogen peroxide (by 8.0 kcal/mol).     

Vanadium-based, extended catalytic lifetime catechol dioxygenases: evidence for a common catalyst

In 1999, a catechol dioxygenase derived from a V-polyoxometalate was reported which was able to perform a record >100 000 total turnovers of 3,5-di-tert-butylcatechol oxygenation using O2 as the oxidant (Weiner, H.; Finke, R. G. J. Am. Chem. Soc. 1999, 121, 9831). An important goal is to better understand this and other vanadium-based catechol dioxygenases. Scrutiny of 11 literature reports of vanadium-based catechol dioxygenases yielded the insight that they all proceed with closely similar selectivities. This, in turn, led to a "common catalyst hypothesis" for the broad range of vanadium based catechol dioxygenase precatalysts presently known. The following three classes of V-based compounds, 10 complexes total, have been explored to test the common catalyst hypothesis: (i) six vanadium-based polyoxometalate precatalysts, (n-Bu4N)4H5PV14O42, (n-Bu4N)7SiW9V3O40, (n-Bu4N)5[(CH3CN)(x)Fe(II).SiW9V3O40], (n-Bu4N)9P2W15V3O62, (n-Bu4N)5Na2[(CH3CN)(x)Fe(II).P2W15V3O62], and (n-Bu4N)4H2-gamma-SiW10V2O40; (ii) three vanadium catecholate complexes, [V(V)O(DBSQ)(DTBC)]2, [Et3NH]2[V(IV)O(DBTC)2].2CH3OH, and [Na(CH3OH)2]2[V(V)(DTBC)3]2.4CH3OH (where DBSQ = 3,5-di-tert-butylsemiquinone anion and DTBC = 3,5-di-tert-butylcatecholate dianion), and (iii) simple VO(acac)2. Product selectivity studies, catalytic lifetime tests, electron paramagnetic resonance spectroscopy (EPR), negative ion mode electrospray ionization-mass spectrometry (negative ion ESI-MS), and kinetic studies provided compelling evidence for a common catalyst or catalyst resting state, namely, Pierpont's structurally characterized vanadyl semiquinone catecholate dimer complex, [VO(DBSQ)(DTBC)]2, formed from V-leaching from the precatalysts. The results provide a considerable simplification and unification of a previously disparate literature of V-based catechol dioxygenases.     

Cationic Silica‐Supported N‐Heterocyclic Carbene Tungsten Oxo Alkylidene Sites: Highly Active and Stable Catalysts for Olefin Metathesis

Designing supported alkene metathesis catalysts with high activity and stability is still a challenge, despite significant advances in the last years. Described herein is the combination of strong σ‐donating N‐heterocyclic carbene ligands with weak σ‐donating surface silanolates and cationic tungsten sites leading to highly active and stable alkene metathesis catalysts. These well‐defined silica‐supported catalysts, [(≡SiO)W(=O)(=CHCMe₂Ph)(IMes)(OTf)] and [(≡SiO)W(=O)(=CHCMe₂Ph)(IMes)⁺][B(Ar^F)₄^?] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazol‐2‐ylidene, B(Ar^F)₄=B(3,5‐(CF₃)₂C₆H₃)₄] catalyze alkene metathesis, and the cationic species display unprecedented activity for a broad range of substrates, especially for terminal olefins with turnover numbers above 1.2 million for propene.     

Biomimetic oxidation reactions of a naked manganese(V)-oxo porphyrin complex

The intrinsic reactivity of a manganese(V)-oxo porphyrin complex, a typically fleeting intermediate in catalytic oxidation reactions in solution, has been elucidated in a study focused on its gas-phase ion-chemistry. The naked high-valent Mn(V)-oxo porphyrin intermediate 1 ([(tpfpp)Mn(V)O](+); tpfpp=meso-tetrakis(pentafluorophenyl)porphinato dianion), has been obtained by controlled treatment of [(tpfpp)Mn(III)]Cl (2-Cl) with iodosylbenzene in methanol, delivered in the gas phase by electrospray ionization and assayed by FT-ICR mass spectrometry. A direct kinetic study of the reaction with selected substrates, each containing a heteroatom X (X=S, N, P) including amines, sulfides, and phosphites, was thus performed. Ionic products arising from electron transfer (ET), hydride transfer (HT), oxygen-atom transfer (OAT), and formal addition (Add) may be observed, with a predominance of two-electron processes, whereas the product of hydrogen-atom transfer (HAT), [(tpfpp)Mn(IV)OH](+), is never detected. A thermochemical threshold for the formation of the product radical cation allows an evaluation of the electron-transfer ability of a Mn(V)-oxo complex, yielding a lower limit of 7.85 eV for the ionization energy of gaseous [(tpfpp)Mn(IV)O]. Linear free-energy analyses of the reactions of para-substituted N,N-dimethylanilines and thioanisoles indicate that a considerable amount of positive charge is developed on the heteroatom in the oxidation transition state. Substrates endowed with different heteroatoms, but similar ionization energy display a comparable reaction efficiency, consistent with a mechanism initiated by ET. For the first time, the kinetic acidity of putative hydroxo intermediates playing a role in catalytic oxidations, [(tpfpp)Fe(IV)OH](+) and [(tpfpp)Mn(IV)OH](+), has been investigated with selected reference bases, revealing a comparatively higher basicity for the ferryl, [(tpfpp)Fe(IV)O], with respect to the manganyl, [(tpfpp)Mn(IV)O], unit. Finally, the neat association reaction of 2 has been studied with various ligands showing that harder ligands are more strongly bound.     

Platinum-based catalysts for the hydroamination of olefins with sulfonamides and weakly basic anilines

Electrophilic Pt(II) complexes catalyze efficient hydroaminations of olefins by sulfonamides and weakly basic anilines. Catalysts include the structurally characterized complex (COD)Pt(OTf)2 (1) and the known dimer [PtCl2(C2H4)]2, activated by AgBF4. Experiments with substituted anilines establish an empirical pKa cutoff (conjugate acid pKa < 1) for the participation of nitrogen-containing substrates in this catalysis. Arylsulfonamides (conjugate acid pKa approximately -6) with various para substituents hydroaminate olefins such as cyclohexene in yields greater than 95% at 90 degrees C. Hydroamination of propylene by p-toluenesulfonamide proceeds with Markovnikov selectivity, suggesting a mechanism that involves olefin activation at Pt. With norbornene and p-toluenesulfonamide as the substrates and 1 as the catalyst, intermediate [(COD)Pt(norbornene)2][OTf]2 (3) was identified and characterized by 19F and 195Pt NMR spectroscopies and mass spectrometry. Kinetic studies provide the empirical rate law, rate = k(obs)[Pt][sulfonamide], and are consistent with a mechanism in which attack of a sulfonamide on the Pt-coordinated olefin is the rate-determining step.     

Density functional study of the roles of chemical composition of di-transition-metal-substituted gamma-Keggin polyoxometalate anions

The roles of chemical composition (X, M and M(FW)) of di-transition-metal-substituted gamma-Keggin polytungstates and polymolybdates, [(X(n)(+)O(4))M(2)(OH)(2)(M(FW))(10)O(32)]((8-n)-), on the geometry, electronic structure, and magnetic properties of these species have been investigated at the density functional level. It was shown that the change of the heteroatom X via Al(III)-Si(IV)-P(V)-S(VI) slightly stabilizes the broken-symmetry (BS) state over the high-spin (HS) state, increases the antiferromagnetic coupling constant, J, of these species, and lowers the energies of their highest-occupied molecular orbitals (HOMOs) and lowest-unoccupied molecular orbitals (LUMOs). The change of the redox-active center M from Mn to Fe slightly increases the M-(XO(4)) interaction, J-coupling constant, and energy gap between the HS and BS states. Meanwhile, the LUMOs are stabilized, indicating the stronger oxidant character of [(X(n)(+)O(4))M(2)(OH)(2)W(10)O(32)]((8-n)-) for M = Fe than Mn. It was shown that the change of addenda atom M(FW) from W to Mo makes (a) the geometry of Keggin "cage" slightly smaller, (b) the interaction of redox-active centers (Fe) with the central XO(4)-unit slightly stronger, and (c) the J-coupling constant, as well as the energy gap DeltaE(BS-HS), slightly larger.