Toxicity identification of gamma-ray treated phenol and chlorophenols

Ionizing radiation, such as gamma-rays and electron-beams, has been applied to modify toxicity of refractory pollutants and industrial wastewaters, however, very few studies reported the cause of toxicity changes by radiation treatment. In this work, degradation of phenol and chlorophenols (5·10⁻⁴M) by gamma-ray treatment and consequent toxicity changes were evaluated. Toxicity of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) was gradually decreased with increasing absorbed dose of gamma-radiation. However, in the case of phenol and monochlorophenols (2-, 3-, and 4-CPs), toxicity was dramatically increased particularly, for a dose of as low as 1 kGy. Hydroquinone, benzoquinone, catechol, chlorohydroquinone, and 4-chlorocatechol were identified to be main by-products of gamma-ray treatment. From the solid phase extraction (SPE) fractionation study, toxicity-causing by-products were found to be hydroquinone, benzoquinone, chlorohydroquinone, and/or 4-chlorocatechol.     

Biodegradability enhancement of textile wastewater by electron beam irradiation

Textile wastewater generally contains various pollutants, which can cause problems during biological treatment. Electron beam radiation technology was applied to enhance the biodegradability of textile wastewater for an activated sludge process. The biodegradability (BOD₅/COD) increased at a 1.0 kGy dose. The biorefractory organic compounds were converted into more easily biodegradable compounds such as organic acids having lower molecular weights. In spite of the short hydraulic retention time (HRT) of the activated sludge process, not only high organic removal efficiencies, but also high microbial activities were achieved. In conclusion, textile wastewater was effectively treated by the combined process of electron beam radiation and an activated sludge process.     

Ammonia Decomposition Using Electron Beam

This study was carried out to determine the decomposition characteristics of ammonia using an electron beam (EB). Factors influencing these decomposition characteristics such as background gases (air, N₂, O₂, and He), initial ammonia concentration (50–150 ppm), relative humidity (0 or 90 %), and absorbed dose (1–15 kGy) were investigated. In the results of removal characteristics by different background gases, the decomposition efficiency of ammonia was lower (approximately 45 % at 5 kGy) when He was used as a background gas compared to the efficiencies when other background gases were selected. Ammonia removal efficiencies, when initial concentrations were 50 and 150 ppm, were 95 and 75 %, respectively, at 15 kGy. Ozone generation by EB irradiation increased from 2.5 kGy and reached a maximum of 45 ppm when 5 kGy of the absorbed dose was irradiated. However, ozone generation started to decrease when the absorbed dose exceeded 5 kGy and decreased to 0.27 ppm at 15 kGy.     

Identification of estrogenic activity change in sewage,industrial and livestock effluents by gamma-irradiation

In this study, reduction of estrogenic activity in three different types of effluents from sewage, industrial and livestock wastewater treatment plants by gamma-irradiation was investigated using the yeast two-hybrid assay. After gamma-ray treatment at a dose of 10 kGy, estrogenic activities of sewage, industrial and livestock effluents decreased from 4.4 to 3.0, 1.5 to 1.0 and 16 to 9.9 ng-EEQ L^?1, respectively. The substantial reduction of estrogenic activity in livestock effluent was attributable to the degradation of 17β-estradiol (E2), estrone (E1) and 17α-ethynylestradiol (EE2). Although bisphenol A (BPA) was found at the highest concentration in all effluents, its contribution to the estrogenic activity was not significant due to its low relative estrogenic potency. Meanwhile, the calculated estrogenic activity based on concentrations of E2, E1, EE2 and BPA in the effluents significantly differed from the measured ones. Overestimation may have resulted by dissolved organic matters in effluents inhibiting the estrogenic activity of E2, E1, EE2 and BPA, whereas underestimation was likely due to estrogenic by-products generated by gamma-irradiation.     

Radiolytic stabilization of poly(hydroxybutyrate)

Stabilization against gamma irradiation effects on Brazilian poly(hydroxybutyrate) (PHB) films was investigated by using commercial additives. With the most effective additive the G value of main chain scissions decreased from 8.6 to 1.5 scissions/100 eV in the absorbed dose range up to 35 kGy. Irradiation increased the biodegradability of the samples, whereas the additives-induced reduction in biodegradability. Irradiation treatment did not influence the degree of crystallinity. Protonic nuclear magnetic resonance (NMR-¹H) analysis revealed formation of hydroxyl-terminal groups upon irradiation.     

Analysis of electrochemical degradation products of sulphonated azo dyes using high-performance liquid chromatography/tandem mass spectrometry

Electrochemical treatment of wastewaters containing azo dyes in the textile industry is a promising approach for their degradation. The monitoring of the course of the decomposition of azo dyes in wastewaters is essential due to the environmental impact of their degradation products. In this work, aqueous solutions of a simple azo dye with a low molecular weight (C.I. Acid Yellow 9) and more complex commercial dye (C.I. Reactive Black 5) were electrochemically treated in a laboratory-scale electrolytic cell in sodium chloride or ammonium acetate as supporting electrolytes. Ion-pairing reversed-phase high-performance liquid chromatography coupled with negative-ion electrospray ionization mass spectrometry is applied for the identification of electrochemical degradation products. In addition to simple inorganic salts, the formation of aromatic degradation products obtained due to the cleavage of azo bonds and further degradation reactions is shown, as well as chlorination where sodium chloride is the supporting electrolyte. Degradation mechanisms are suggested for the treatment with sodium chloride as the supporting electrolyte.     

Determination of carbohydrate- and lignin-derived components in complex effluents from cellulose processing by capillary electrophoresis with electrospray ionization-mass spectrometric detection

Degradation products from lignocellulosic materials receive increasing attention due to the continuously growing interest in their utilization. The inherent structural variance of lignocellulosics combined with the intricacy of lignocellulosic processing (e.g. pulping of wood and bleaching of cellulosic pulps) and the complexity of degradation processes occurring therein result in rather complex mixtures in the process streams and effluents that contain a large quantity of structurally different degradation products. This is true for most processing steps, but also for degradation reactions occurring during aging of lignocellulosic materials, such as paper, cellulosic tissue or textiles. In order to render such mixtures better analytically accessible than hitherto possible a CE-ESI-MS method was established for the simultaneous determination of aliphatic carboxylic acids from the degradation of (hemi)celluloses and aromatic compounds from lignin degradation. CE and ESI-MS parameters have been optimized towards sensitivity and good reproducibility. The method was tested in two real-world scenarios: the determination of major components in effluents from bleaching stages in the pulp and paper industry, and the analysis of degradation products in extracts of naturally aged papers. The advantages and drawbacks of this approach are critically discussed.     

Oxidation of gaseous styrene by electron beam irradiation

In this research, the absorbed dose, background gases, relative humidity, and initial concentrations were selected as control factors to discover decomposition characteristics of styrene using electron beam irradiation. It was confirmed that a considerable amount of styrene was removed by primary electrons as well as radicals and ions, which were produced after the electron beam irradiation. Moreover, the removal efficiencies of styrene were observed to rise when the initial concentration was lower, moisture content was higher, and the absorbed dose increased. For instance, 50 ppmv styrene showed extremely high removal efficiency (over 98%) at a condition of 2.5 kGy. A small amount of styrene oxide, benzaldehyde, aerosol, CO, and CO₂ were produced as by-products after EB irradiation.     

Treatment of opium alkaloid containing wastewater in sequencing batch reactor (SBR)—Effect of gamma irradiation

Aerobic biological treatment of opium alkaloid containing wastewater as well as the effect of gamma irradiation as pre-treatment was investigated. Biodegradability of raw wastewater was assessed in aerobic batch reactors and was found highly biodegradable (83–90% degradation). The effect of irradiation (40 and 140 kGy) on biodegradability was also evaluated in terms of BOD₅/COD values and results revealed that irradiation imparted no further enhancement in the biodegradability. Despite the highly biodegradable nature of wastewater, further experiments in sequencing batch reactors (SBR) revealed that the treatment operation was not possible due to sludge settleability problem observed beyond an influent COD value of 2000 mg dm^?3. Possible reasons for this problem were investigated, and the high molecular weight, large size and aromatic structure of the organic pollutants present in wastewater was thought to contribute to poor settleability. Initial efforts to solve this problem by modifying the operational conditions, such as SRT reduction, failed. However, further operational modifications including addition of phosphate buffer cured the settleability problem and influent COD was increased up to 5000 mg dm^?3. Significant COD removal efficiencies (>70%) were obtained in both SBRs fed with original and irradiated wastewaters (by 40 kGy). However, pre-irradiated wastewater provided complete thebain removal and a better settling sludge, which was thought due to degradation of complex structure by radiation application. Degradation of the structure was observed by GC/MS analyses and enhancement in filterability tests.     

Effect of low-frequency ultrasound waves on the hydrogen peroxide degradation process

Investigation of the activating effect of low-frequency ultrasonic waves on both fiber-forming polymer and chemicals and reagents used in bleaching processes of textile materials is an important objective. Comprehensive experimental studies on determination of the ratio of the treatment time and power of ultrasonic waves have been carried out in order to reach the optimal rate of hydrogen peroxide decomposition. The experimental results have shown that the optimal hydrogen peroxide degradation rate during ultrasoundassisted bleaching is observed at an ultrasonic power of 3 kW and a treatment time of 15–20 min.     

Decomposition of Trimethylamine by an Electron Beam

To identify the decomposition characteristics of trimethylamine (TMA) by electron beam (EB), we conducted an experiment based on process parameters, including absorbed dose (2.5–10 kGy), background gas (air, O₂, N₂ and He), water content (1,200, 14,300, and 27,500 ppm), initial concentration (50, 100, and 200 ppm) and reactor type (batch or continuous flow system). Air background gas showed a maximum TMA removal efficiency of 86 % at 10 kGy and that was the highest efficiency of all background gases. Energy efficiencies were higher when the absorbed dose was lower (e.g., 2.5 kGy). Decomposition efficiencies of all initial TMA concentrations were approximately >90 % at 10 kGy. Removal efficiencies increased up to 30 % as water vapor increased. As a by-product, it is observed that CH₃ radical formed by EB irradiation was converted into CH₄ by reaction with residual TMA, (CH₃)₂NH, and H. These results suggest that EB technology can be applied for TMA treatment under low concentration and high flow rate conditions.     

Efficient total halogen-free photochemical bleaching of kraft pulps using alkaline hydrogen peroxide

Total halogen-free bleaching of kraft pulps was conducted by an oxidative photochemical process at room temperature using alkaline hydrogen peroxide. Selection of an appropriate wavelength of light was crucial for effective bleaching and avoiding degradation of cellulose. The wavelength of the light has to be selected so that the light is absorbed only by the colored compounds in the pulps and not by the bleaching reagents or the pulp itself. When a long-wavelength black-light fluorescent lamp was used in combination with aqueous hydrogen peroxide solution at pH 11, the bleaching efficiency for hardwood and softwood kraft pulps reached the same level as that obtained by conventional two-stage elemental chlorine-free processes.     

Degradation behavior of poly (l-lactide-co-glycolide) films through gamma-ray irradiation

Gamma-ray irradiation is a very useful tool to improve the physicochemical properties of various biodegradable polymers without the use of a heating and crosslinking agent. The purpose of this study was to investigate the degradation behavior of poly (l-lactide-co-glycolide) (PLGA) depending on the applied gamma-ray irradiation doses. PLGA films prepared through a solvent casting method were irradiated with gamma radiation at various irradiation doses. The irradiation was performed using 60Co gamma-ray doses of 25–500 kGy at a dose rate of 10 kGy/h.The degradation of irradiated films was observed through the main chain scission. Exposure to gamma radiation dropped the average molecular weight (M_n and M_w), and weakened the mechanical strength. Thermograms of irradiated film show various changes of thermal properties in accordance with gamma-ray irradiation doses. Gamma-ray irradiation changes the morphology of the surface, and improves the wettability. In conclusion, gamma-ray irradiation will be a useful tool to control the rate of hydrolytic degradation of these PLGA films.     

Radiolytic degradation of malathion and lindane in aqueous solutions

Degradation of malathion and lindane pesticides present in an aqueous solution was investigated on a laboratory scale upon gamma-irradiation from a ⁶⁰Co source. The effects of pesticide group, presence of various additives and absorbed dose on efficiency of pesticide degradation were investigated. Gamma-irradiation was carried out in distilled water solutions (malathion and lindane) and in combination with humic solution (HS), nitrous oxide (N₂O) and HS/N₂O (lindane) over the range 0.1–2 kGy (malathion) and 5–30 kGy (lindane). Malathion was easily degraded at low absorbed doses compared to lindane in distilled water solutions. Absorbed doses required to remove 50% and 90% of initial malathion and lindane concentrations in distilled water solutions were 0.53 and 1.77 kGy (malathion) and 17.97 and 28.79 kGy (lindane), respectively. The presence of HS, N₂O and HS/N₂O additives in aqueous solutions, significantly improved the effectiveness of radiolytic degradation of lindane. Chemical analysis of the pesticides and the by-products resulted from the radiolytic degradation were made using a gas chromatography associated with mass spectrometry (GC–MS). Additionally, the final degradation products of irradiation as detected by ion chromatography (IC) were acetic acid and traces of some anions (phosphate and chloride).     

Remotion of organic compounds of actual industrial effluents by electron beam irradiation

Organic compounds has been a great problem of environmental pollution, the traditional methods are not effecient on removing these compounds and most of them are deposited to ambient and stay there for long time causing problems to the environment. Ionizing radiation has been used with success to destroy organic molecules. Actual industrial effluents were irradiated using IPEN's electron beam wastewater pilot plant to study organic compounds degradation. The samples were irradiated with and without air mixture by different doses. Irradiation treatment efficiency was evaluated by the Cromatography Gas Analyses of the samples before and after irradiation. The studied organic compounds were: phenol, chloroform, tetrachloroethylene (PCE), carbon tetrachloride, trichloroethylene (TCE), 1,1-dichloroethane, dichloromethane, benzene, toluene and xilene. A degradation superior to 80% was achieved for the majority of the compounds with air addition and 2kGy delivered dose condition. For the samples that were irradiated without air addition the degradation was higher.     

Applications of transition-metal catalysts to textile and wood-pulp bleaching

From an economic perspective, textile and paper bleaching are amongst the most important oxidation processes. The removal of unwanted chromophores, be it stains on cloths or residual lignin in wood pulp, consumes more than 60 % of the world production of hydrogen peroxide. However, existing technologies have their limitations. At ambient temperature, hydrogen peroxide gives little stain bleaching and is used inefficiently. Hence the high product dosages and washing temperatures required limit its application to predominantly European markets, to the exclusion of the majority of the world's population. In paper manufacture, the use of chlorine-based oxidants results in the formation of chlorinated waste products, which show poor biodegradability. On the other hand, hydrogen peroxide requires higher temperatures, longer reaction times and is more expensive. Transition-metal catalysts offer an alternative. This review discusses the main classes of known bleach catalysts and their possible modes of action.     

Decomposition and decoloration of a direct dye by electron beam radiation

The wastewaters released by textile industries to the environment contain hazardous compounds like toxic refractory dye stuff at high concentration. In this study, electron beam irradiation-induced decoloration and decomposition of C.I. Direct Black 22 aqueous solutions were investigated. The influences of absorbed doses and initial dye concentration on the percent of decoloration, COD and pH of the solutions are described. The results show that the direct dye solutions can be effectively degraded by electron beam irradiation.     

Electron beam irradiations of polypropylene syringe barrels and the resulting physical and chemical property changes

Mechanical, thermal, chemical decomposition and electron spin resonance (ESR) methods were used to study electron beam irradiated polypropylene syringe barrels that were irradiated to a total fractionated dose of 0, 20, 40, 60, and 80 kGy (in steps of 20 kGy). Dose mapping was conducted to determine dose to and through the syringe barrel. Analysis of these data indicated that degradation of the polypropylene syringes increased with an increase in electron beam irradiation.     

Qualitative and quantitative analysis of the light hydrocarbons produced by radiation degradation of N,N-diethylhydroxylamine

This paper reports on the qualitative and quantitative analyses of light hydrocarbons produced by radiation degradation of N,N-diethylhydroxylamine. The results show that when the absorbed doses are between 10 and 1000 kGy, the main light hydrocarbons are methane, ethane, ethene, propane and n-butane. Their volume fractions are increased with the increase of the dose. The volume fraction of ethene is also increased at low doses with the increase of the dose, but it is decreased with the increase of dose at high doses. This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluation of radiation stability of N,N-didodecyl N′,N′-di-octyl diglycolamide: a promising reagent for actinide partitioning

The radiation stability of N,N-di-dodecyl-N′,N′-di-octyl-3-oxapentane-1,5-diamide (D³DODGA) was studied by γ-irradiation of the solvent up to a absorbed dose of 1,000 kGy. The effect of γ-irradiation on the radiolytic degradation of D³DODGA was assessed by measuring the distribution ratio of Am(III) (D _Am(III)) as well as the third phase formation in the irradiated D³DODGA-n-dodecane solution. The D _Am(III) in the irradiated solution decreased with increase of absorbed dose. The critical aqueous concentration of Nd(III) above which the third phase forms, increased with increase of absorbed dose. However, the limiting organic concentration of Nd(III) remained at ~25 mM irrespective of the absorbed dose. Recovery of Am(III) from the radiolytically degraded organic phase showed that back extraction of Am(III) was quantitative in a few contacts using dilute nitric acid. Our studies clearly indicated that radiolytic degradation of D³DODGA in n-dodecane is marginal even at the absorbed dose of 1,000 kGy, and therefore D³DODGA is a potential candidate for minor actinide partitioning.