Synthesis of Linear Amphipathic Porphyrin Dimers and Trimers: An Approach to Bilayer Lipid Membrane Spanning Porphyrin Arrays

A modular building-block approach has been developed for the construction of linear amphipathic porphyrin arrays. The reaction of meso-(trifluoromethyl)dipyrromethane and an aldehyde under the conditions of the two-step room temperature porphyrin synthesis affords the trans-substituted porphyrin (13-56% yields). A similar reaction with two different aldehydes provides access to porphyrins bearing two different functional groups. An ethyne porphyrin and an iodo porphyrin (either free base or zinc) are selectively joined via Pd(0)-catalyzed coupling reactions, affording a linear array with porphyrins in defined metalation states. Coupling of a zinc-porphyrin bearing iodo and ester groups with a free base porphyrin bearing ethyne and ester groups yielded the zinc-free base porphyrin dimer. Coupling of a bis-ethyne porphyrin with a porphyrin bearing iodo and ester groups afforded the porphyrin trimer. Cleavage of the esters yielded the amphipathic porphyrin dimer and trimer arrays. The arrays with adjacent zinc and free base porphyrins undergo efficient electronic energy transfer. Both amphipathic porphyrin arrays have been incorporated into L-alpha-phosphatidylcholine vesicles. This versatile synthetic strategy provides access to a family of porphyrin arrays for studies of photophysical processes in supramolecular assemblies.     

The synthesis of covalently linked tetraarylporphyrin dimers

A new and general synthesis of porphyrin dimers is described. The synthesis involves the reaction of dibromoalkanes with phenolic porphyrins, such as 5(4-hydroxyphenyl)-10,15,20-tritolylporphyrin, to form σ-bromoalkyl porphyrin ethers. The latter compounds are then reacted with a second phenolic porphyrin to give porphyrin dimers. A mixed metalloporphyrin dimer has been prepared which contains both V(IV) and Cu(II). The compounds have been examined spectroscopically. The free-base porphyrin dimers show a splitting of the intense Soret band. This is interpreted as indicative of weak singlet energy transfer between the covalently linked porphyrins.     

1,3,5,7-Tetrasubstituted adamantanes as frameworks in the design of assemblies of porphyrin macrocycles

A new strategy for the synthesis of adamantane-containing polyphenols of a porphyrin series has been suggested on the basis of Suzuki–Miyaura reaction between 1,3,5,7-tetrakis(4'-iodophenyl)adamantane and a monoboryl derivative of substituted porphyrin. The synthesis of this porphyrin assembly on the adamantane core followed by chemical transformations of this compound has provided a possibility to synthesize the corresponding polyphenol derivative. The latter has been used in the development of positive photoresists for nanolithography with exposure to radiation at a wavelength 13.5 nm capable of producing topological structures with a resolution of 16 nm.     

Synthesis and Aggregation Behavior of Chiral Naphthoquinoline Petroporphyrin Asphaltene Model Compounds

The synthesis of structurally relevant compounds that model the chemical behavior and supramolecular aggregation of the asphaltenes, the most polar and metal‐rich fraction of heavy petroleum, has been extended to include fusions of important petroleum biomarkers. The synthetic protocol features a multicomponent reaction to form a dyad composed of a fused steroidal naphthoquinoline, followed by a pyrrole cyclocondensation reaction to incorporate the dyad into a chiral triad containing a Ni^II‐porphyrin substituent. This synthetic protocol has been used to prepare large molecules that represent both “continental” and “archipelago” models of asphaltene composition. The steroid–naphthoquinoline–porphyrin triads have been studied by UV/Vis and circular dichroism (CD) spectroscopies, and the results suggest that the naphthoquinoline core, a tetrahydro[4]helicene, adopts a helical conformation, producing a CD signal electronically related to the characteristic Soret absorption band of the porphyrin subunit. Finally, supramolecular aspects of asphaltene aggregation have been examined on a molecular level through analysis of axial coordination of pyridine to the Ni‐porphyrin. The relative affinity of pyridine for binding to the Ni center of the porphyrin is evaluated by comparing binding propensities in a series of sterically differentiated substituted porphyrins.     

519—Reduction of hydrophobic porphyrin at the octane/water interface controlled by the specific adsorption of halogen anions

The redox reaction between the ferric complex of hydrophobic porphyrin and sodium dithionite in two different phases occurring at the interface between two immiscible liquids has been investigated by Volta potential measurements and spectroscopy. The reduction of the ferric complex of hydrophobic porphyrin adsorbed at the interface was found to be accompanied by a potential shift in the negative direction and to depend significantly on the nature of the anion and the ionic strength of the supporting electrolyte. Specifically adsorbed halogen anions inhibited the redox reaction in the sequence: Cl^?, Br^?, I^?. Depending on pH, the ferric complex of hydrophobic porphyrin exists in the uncharged (FeP-O-PFe) form or in the cation FeP⁺ form. The interaction between the ferric complex hydrophobic porphyrin and water has also been investigated.     

Triphenylene-fused porphyrins

Triphenylene has been successfully fused to the porphyrin periphery through a convenient oxidative ring-closure reaction. Bistriphenylene-fused porphyrins and a dibenzo[fg,op]tetracene-fused porphyrin have also been obtained using a similar approach. These π-extended porphyrins exhibited broadened and bathochromic shifted UV-vis absorptions.     

Exploration of electronically interactive cyclic porphyrin arrays

We have explored a variety of covalently and non-covalently assembled cyclic porphyrin arrays mainly as biomimetic models of light harvesting antenna in photosynthetic systems. The key reaction is Ag(I)-promoted coupling reaction of 5,15-diaryl zinc(II) porphyrin that provides a meso–meso linked diporphyrin. An advantage of this coupling reaction is its extremely easy extension to higher porphyrin arrays, since longer porphyrin arrays have practically the same reactivity as that of the monomer. On the basis of this strategy, we have prepared cyclic porphyrin arrays including directly meso–meso linked porphyrin rings CZ4–CZ8, large porphyrin wheels C12ZA and C24ZB, and three-dimensional porphyrin boxes D1–D3. Efficient excitation energy transfer along these cyclic porphyrin arrays has been revealed by the time-resolved transient absorption and fluorescence measurements.     

Three-dimensionally arranged windmill and grid porphyrin arrays by AgI-promoted meso-meso block oligomerization

The syntheses of soluble windmill and grid porphyrin arrays through the AgI-promoted coupling reaction of 1,4-phenylene-bridged linear porphyrin arrays, which are comprised of a central ZnII beta-free porphyrin and flanking peripheral NiII beta-octaalkylporphyrins, are described. The coupling reaction is advantageous in light of its high regioselectivity occurring only at the meso-position of the ZnII beta-free porphyrin as well as its easy extension to large porphyrin arrays. The windmill porphyrin arrays in turn serve as an effective substrate for further coupling reactions, to give three-dimensionally arranged grid porphyrin arrays. Further the grid porphyrin 12-mer (a tetramer of the linear porphyrin trimer) was also coupled to afford grid porphyrins (24-mer, 36-mer, and 48-mer). These porphyrin arrays were isolated in a discrete form by repetitive GPC/HPLC (GPC= gel-permiation chromatography). Competitive experiments with three linear porphyrin trimers bearing different peripheral metalloporphyrins (ZnII, NiII, and Cull), and the trapping experiment of the radical cation at the peripheral porphyrin with AgNO2, suggested that an initial one-electron oxidation of the easily oxidizable peripheral ZnII beta-octaalkylporphyrin with an AgI ion and a subsequent endothermic hole transfer assist the generation of the radical cation at the central ZnII beta-free porphyrin. In all ZnII-metallated windmill porphyrin arrays, the energy level of the S1 state of the meso-meso-linked diporphyrin core is lower than that of the peripheral porphyrins, thereby allowing an energy flow from the peripheral porphyrins to the central diporphyrin core; this has been confirmed by measurements of fluorescence lifetimes and picosecond time-resolved fluorescence spectra. The excitation energy transfer in the arrays encourages their potential use as an light-harvesting antenna.     

四（对甲氧基苯基）卟啉钐配合物的合成及光谱

利用自制的四（对甲氧基苯基）卟啉,与氯化钐在四氢呋喃溶剂中反应,得到一个未见文献报道的四（对甲氧基苯基）卟啉钐(Ⅲ)化合物。 利用UV-Vis、IR、¹H NMR 及元素分析测试技术对化合物结构进行了表征,并对其配位反应条件、配体及配合物的荧光性能进行了研究。 反应条件简单,易于操作,产率为62.4％。     

Preparation and Photophysical and Photoelectrochemical Properties of a Covalently Fixed Porphyrin–Chemically Converted Graphene Composite

Chemically converted graphene (CCG) covalently linked with porphyrins has been prepared by a Suzuki coupling reaction between iodophenyl‐functionalized CCG and porphyrin boronic ester. The covalently linked CCG–porphyrin composite was designed to possess a short, rigid phenylene spacer between the porphyrin and the CCG. The composite material formed stable dispersions in DMF and the structure was characterized by spectroscopic, thermal, and microscopic measurements. In steady‐state photoluminescence spectra, the emission from the porphyrin linked to the CCG was quenched strongly relative to that of the porphyrin reference. Fluorescence lifetime and femtosecond transient absorption measurements of the porphyrin‐linked CCG revealed a short‐lived porphyrin singlet excited state (38 ps) without yielding the porphyrin radical cation, thereby substantiating the occurrence of energy transfer from the porphyrin excited state to the CCG and subsequent rapid decay of the CCG excited state to the ground state. Consistently, the photocurrent action spectrum of a photoelectrochemical device with a SnO₂ electrode coated with the porphyrin‐linked CCG exhibited no photocurrent response from the porphyrin absorption. The results obtained here provide deep insight into the interaction between graphenes and π‐conjugated systems in the excited and ground states.     

Facile Synthesis,Characterization, and Fluorescence Studies of Novel Porphyrin Appended Thiazoles

A facile and high yielding synthesis of porphyrin appended thiazoles 5 from the reaction of 5‐(4‐thiocarboxamidophenyl)‐10,15,20‐triphenylporphyrin with α‐bromo ketones has been described. The fluorescence studies of synthesized porphyrin appended thiazoles 5 in chloroform indicate that porphyrin π system is not greatly perturbed by substitution of a thiazole moiety at meso‐phenyl ring even in the excited state.     

Preparation and photophysical and photoelectrochemical properties of a covalently fixed porphyrin-chemically converted graphene composite

Chemically converted graphene (CCG) covalently linked with porphyrins has been prepared by a Suzuki coupling reaction between iodophenyl-functionalized CCG and porphyrin boronic ester. The covalently linked CCG-porphyrin composite was designed to possess a short, rigid phenylene spacer between the porphyrin and the CCG. The composite material formed stable dispersions in DMF and the structure was characterized by spectroscopic, thermal, and microscopic measurements. In steady-state photoluminescence spectra, the emission from the porphyrin linked to the CCG was quenched strongly relative to that of the porphyrin reference. Fluorescence lifetime and femtosecond transient absorption measurements of the porphyrin-linked CCG revealed a short-lived porphyrin singlet excited state (38 ps) without yielding the porphyrin radical cation, thereby substantiating the occurrence of energy transfer from the porphyrin excited state to the CCG and subsequent rapid decay of the CCG excited state to the ground state. Consistently, the photocurrent action spectrum of a photoelectrochemical device with a SnO(2) electrode coated with the porphyrin-linked CCG exhibited no photocurrent response from the porphyrin absorption. The results obtained here provide deep insight into the interaction between graphenes and π-conjugated systems in the excited and ground states.     

Single-boron complexes of N-confused and N-fused porphyrins

Boron(III) has been inserted into N-confused porphyrin, (NCPH)H2 (1), and N-fused porphyrin, (NFP)H (2). The reaction of dichlorophenylborane and 1 yields sigma-phenylboron N-confused porphyrin (4). The boron atom is bound by two pyrrolic nitrogen atoms and the sigma-phenyl ligand. The N-confused pyrrole ring is not involved in the direct coordination because the C(21)-H fragment remains intact. A reaction between PhBCl2 and N-fused porphyrin produces sigma-phenylboron N-fused porphyrin (3+). 4 converts quantitatively into 3+ under protonation. In sigma-phenylboron N-fused porphyrin [(NFP)BPh]Cl, the coordinating environment of boron(III) resembles a distorted trigonal pyramid, with the nitrogen atoms occupying equatorial positions and with the phenyl ligand lying at the unique apex. Boron(III) is displaced by 0.547(4) A from the N3 plane. The B-N distances are as follows: B-N(22), 1.559(4) A; B-N(23), 1.552(4) A; B-N(24), 1.568(4) A; B-C(ipsoPh), 1.621(4) A. 3+ can be classified as a boronium cation considering a filled octet and a complete coordination sphere. 3+ is susceptible to alkoxylation at the inner C(9) carbon atom, yielding 5-OR. The addition of acid results in protonation of the alkoxy group and elimination of alcohol, restoring the original 3+. Density functional theory has been applied to model the molecular and electronic structure of 4, 3+, and syn and anti isomers of methoxy adducts 5-OMe.     

Hexabrominated porphyrins in the synthesis of fluorene-containing polyphenols

A new strategy for the synthesis of fluorene-containing polyphenols of porphyrin series by the Suzuki–Miyaura reaction of hexabromoporphyrin and monoboryl derivative of substituted fluorene has been proposed. Several sequential chemical transformations of the prepared porphyrin allowed preparation of polyphenol derivative of the noted compound. Similar polyphenol has been used as a basis for the design of positive photoresists for nanolithography with 13.5-nm exposing radiation, which can produce topological structures with resolution 22–16 nm.     

The coordination of bismuth by porphyrins

The coordination chemistry of porphyrins towards the complexation of bimuth(III) has been investigated. Although the insertion of bismuth is tedious in porphyrins such as octa-ethyl porphyrin (OEP) or tetra-tolyl porphyrin (TTP), we have demonstrated that simple modifications of the ligand, like the grafting of arms bearing either ester groups or acid functions, lead to stable complexes, resulting from a rapid complexation reaction.     

Tetraindole Derivatives of Porphyrins as Building Blocks in the Synthesis of Monodisperse Polyphenols

A new strategy for the synthesis of monodisperse polyphenols chemically bound to a rigid thermally stable molecular platform has been suggested. The platform has been prepared by the Suzuki–Miyaura reaction of a tetraboryl porphyrin derivative and 3-(4′-bromophenyl)-4,6-dimethoxyindole. Subsequent reactions of complete demethylation of obtained tetraindole and partial blocking of the corresponding phenolic hydroxyls by acid-labile protective groups have led to the formation of a final modified polyphenol compound of the porphyrin series. On the basis of the this polyphenol, a positive photoresist for lithography with exposure radiation at a wavelength of 13.5 nm has been developed; the photoresist affords the fabrication of topological structures with 16-nm resolution.     

不对称希夫碱卟啉及其稀土配合物的合成与表征

以二甲基甲酰胺为溶剂,5-对氨基苯基-10,15,20-三苯基卟啉与苯甲醛直接反应得到一种不对称希夫碱卟啉化合物,并合成了它的稀土配合物.用元素分析、紫外-可见光谱、红外光谱1、H核磁共振以及X射线光电子能谱对这些化合物进行了表征,推测了稀土乙酰丙酮卟啉配合物的结构,稀土离子与乙酰丙酮的两个O原子和卟啉的4个吡咯N原子配位,配位数为6,稀土离子位于卟啉平面的上方.     

Electrochemical and spectral studies on the reductive nitrosylation of water-soluble iron porphyrin

The reaction of iron(III) (meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (Fe(III)TMPyP) with nitric oxide (NO) was studied by electronic absorption spectroscopy, ESR, and electrochemical and spectroelectrochemical techniques in aqueous solutions with pH from 2.2 to 12.0. Fe(III)TMPyP has been found to undergo a reductive nitrosylation in all pHs, and the product of nitric oxide binding to the porphyrin has been determined as iron(II) porphyrin nitrosyl complex ([Fe(II)(NO)TMPyP]). The rate of the reductive nitrosylation exhibits a tendency to get faster with increase in pH. An intermediate species was observed around neutral pH by spectroelectrochemical technique and was proposed to be the iron(II) nitrosyl complex of the mu-oxo dimeric form of FeTMPyP, which is known to be a predominant in neutral solutions.     

Synthesis and properties of a new (octaethylporphyrinato)-manganese(III)–pyridinyl-substituted pyrrolidinofullerene dyad

The formation of a porphyrin–fullerene dyad from 2′-(pyridin-4-yl)-5′-(pyridin-2-yl)-1′-(pyridin-3-ylmethyl)-2′,5′-dihydro-1′H-pyrrolo[3′,4′: 1,9](C₆₀-I_h)[5,6]fullerene and (2,3,7,8,12,13,17,18-octaethylporphyrinato) manganese(III) with axial chloride ligand has been studied on a quantitative level with the goal of obtaining supramolecules possessing biological activity. Preliminarily, the reaction of manganese(III) porphyrin with pyridine has been studied. The donor–acceptor dyads are formed either instantaneously and reversibly (pyridine) or slowly and irreversibly (substituted fullerene). In both cases, the reaction is a one-step process for which thermodynamic and kinetic parameters have been determined. The results can be used to optimize conditions for the synthesis of porphyrin–fullerene dyads. The obtained dyads have been characterized by spectral data and stability constants.     

Mechanistic insights on the site selectivity in successive 1,3-dipolar cycloadditions to meso-tetraarylporphyrins

A DFT study on site selectivity in successive 1,3-dipolar cycloadditions of meso-tetraarylporphyrins with azomethine ylide and N-methylnitrone has been carried out. The calculation of the thermodynamic stability of both ylide and nitrone-derived adducts reveals that bacteriochlorins are more stable and have stronger aromatic character than isobacteriochlorins. Calculations of whole reaction pathways show that cycloadditions of azomethine ylide on porphyrin and its derived chlorin are irreversible and hence kinetically controlled. Solvent influence on the site selectivity of this reaction has also been considered, and appears to be decisive in controlling the site selectivity. In contrast, cycloadditions of nitrone over porphyrin and chlorin are clearly reversible, pointing to a thermodynamic control of these reactions.