Maintaining single polarization and dispersion compensation with modified rectangular microstructure optical fiber

In this paper, we propose and numerically demonstrate a highly birefringent microstructure optical fiber which shows negative dispersion coefficient of about −288 to −550 ps/(nm km) covering S to L wavelength bands and −425 ps/(nm km) at the excitation wavelength 1550 nm. This proposed design successfully compensate the dispersion covering S to L communication bands ranging from 1460 to 1625 nm along with relative dispersion slope (RDS) perfectly matched to that of single mode fiber of about 0.0036 nm⁻¹. Apart from dispersion compensation, the designed MOF offers high birefringence of 2.94 × 10⁻² at 1550 nm and better compensation ratio with design simplicity due to circular air-holes in the fiber cladding.     

Nonlinear refraction and photoinduced birefringence in chlorophosphonazo I doped polymer thin films

The nonlinear refraction and photoinduced birefringence of chlorophosphonazo I (CPA I ) doped PVA thin films were investigated. The single-beam Z-scan measurement showed that CPA I doped PVA thin film possessed a large value of nonlinear refractive index (n₂=1.82×10⁻¹² cm²/W) under a pulse 532 nm excitation, and the mechanism accounting for the process of nonlinear refraction was discussed in term of resonant electronic effect. Moreover, fast and stable molecular reorientation was observed when investigating the photoinduced birefringence of CPA I doped PVA thin film with a CW 532 nm laser as pump light and a CW 650 nm laser as probe light.     

Polarization maintaining holey fibers for residual dispersion compensation over S + C + L wavelength bands

We report on a highly birefringent holey fiber for broadband dispersion compensation covering the S, C, and L telecommunication bands i.e. wavelength ranging from 1460 to 1625 nm. The finite element method with circular perfectly matched layer boundary condition is used to investigate the guiding properties. Numerical analysis demonstrates that it is possible to obtain negative dispersion coefficient of about −470 to −850 ps/nm/km over S to L-bands and a relative dispersion slope perfectly matched with single mode fiber (SMF) of about 0.0036 nm⁻¹ at 1550 nm. At the same time birefringence of the order 2.53 × 10⁻² is realized at 1550 nm wavelength. Owing to superior optical properties of the proposed holey fiber, this can be a promising candidate for broadband dispersion compensation and sensing applications.     

Stretched exponential kinetics for photoinduced birefringence in azo dye doped PVA films

We fabricated azo dye (methylorange) doped poly vinyl alcohol (MO/PVA) thin films and measured the photoinduced birefringence (PIB) kinetics for several pump beam intensities and for various MO concentrations by using the pump-probe technique. A novel approach to explain the transient behaviors of the photoinduced anisotropy is presented by employing an empirical stretched exponential time response in the course of the trans-cis-trans photoisomerization of azo molecules and is compared with the experimental data, showing excellent agreement. The stretched exponent is estimated to be β = 0.34 ± 0.04, revealing amorphous nature of the MO/PVA system.     

Design of Topas microstructured fiber with ultra-flattened chromatic dispersion and high birefringence

A microstructured polymer optical fiber (mPOF) with both ultra-flattened near-zero chromatic dispersion and high birefringence based on Topas cyclic olefin copolymer is designed. Three rings of uniform elliptical air holes are arranged in triangular lattice in the cladding and an extra small defected hole is introduced in the fiber core. Guided modes, dispersion, birefringence and mode confinement properties of the designed mPOF are investigated by using the full-vector finite element method. Dispersion values between ± 0.5 ps/km/nm over the wavelength 1.1-1.7 μm and high birefringence of the order of 10⁻³ are obtained for the optimized fiber structure. Low confinement losses and small effective mode area are obtained at the same time. The relatively simple architecture of the proposed Topas mPOF can be fabricated by our extrusion-stretching techniques.     

Optical features of the gold nanoparticles deposited on ITO substrates

We have performed firstly studies of the photoinduced second order susceptibilities in the Au nanoparticles (NP) A, B and C under simultaneous influence of the bicolor 1064 nm and bicolor laser treatment (1064 nm 10 ns pulsed laser with pulse power densities 532 nm 10 ns laser treatment and the cw 300 mW 532 nm SHG coherent laser beams. We have studied three types of samples possessing irregular and different dense parameters of the Au NP deposited on the ITO substrate. We have found that the maximal bicolor (1064 nm and 532 nm) stimulated optical second harmonic generation for the 10 ns pulse duration was observed for the samples possessing irregular Au NP deposited on the ITO. We have performed studies of the photoinduced second order susceptibilities in the Au NP under simultaneous influence of the bicolor 1064 nm and bicolor laser treatment (1064 nm 10 ns pulsed laser with pulse power densities 532 nm 10 ns laser treatment and the cw 300 mW 532 nm SHG coherent laser beams). We have found that during the 15-20 min of the cw treatment there occur the principal changes in the absorption maxima. These maxima indicate on the occurrence of the additional absorption nearby the 308 nm and 310 nm and 345 nm spectral bands. The later are caused by the occurrence of the trapping levels in the border between the ITO substrate and the Au nanoparticles.     

Nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer

The nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer were investigated. The single beam Z-scan measurement showed the polymer film possessed a value of nonlinear refractive index n₂ = −1.07 × 10⁻⁹ cm²/W under a picosecond 532 nm excitation. Photoinduced anisotropy in the polymer was studied through dichroism and photoinduced birefringence. A photoinduced birefringence value Δn ∼ 10⁻² was achieved in the polymer film. The mechanism for the nonlinear optical response and the physical process of photoinduced anisotropy in the polymer were discussed.     

Nonlinear optical properties of an azo-based dye irradiated by picosecond and nanosecond laser pulses

The nonlinear optical properties of an azo-based dye were investigated using Z-scan technique employing 38 ps pulses at 532 and 1064 nm, and 6 ns laser pulses at 532 nm. Large nonlinear absorption and nonlinear refraction were observed at both ps and ns 532 nm in the azoic dye. When excited at ps 1064 nm, this dye displayed a large two-photon absorption cross-section (σ₂=1810 GM). Meanwhile, the optical nonlinearity mechanism was discussed in terms of molecular structure, excitation wavelength, and pulse width.     

A novel switchable single polarized Er-doped PMF linear cavity laser based on two PMF gratings

The switchable single polarized Er-doped polarization-maintaining-fiber (PMF) linear cavity laser based on two PMF gratings has been proposed. The gratings are fabricated in Er-doped PMFs, each grating has two single polarized wavelength and they function as the reflective mirror of the laser. So the laser can output switchable single wavelength polarized laser, with the switchable of the wavelength of grating the output of the laser can also be switched. Our experiment result shows that the laser has the OSNR of 48.5 dB, the degree of polarization (DOP) of 98.7%, and the laser linewidth with less than 9.2 pm.     

Spliced-fiber mode filter for 1060-nm single-mode transmission

We present a novel mode filter operating for the 1060-nm band, which selectively removes the power of the high-order mode (HOM) from a conventional single-mode fiber (C-SMF) that supports two modes at the short-wavelength band. Our mode filter is fabricated very easily by fusion-splicing a short section of short-wavelength single-mode fiber in the middle of the C-SMF link. By using our spliced-fiber mode filter (SF-MF), a high HOM suppression performance of > 18 dB has been achieved with a low insertion loss of < 0.3 dB over the full band of optical communications from 1050 nm to 1650 nm. We have also developed a new mode power measurement scheme that takes advantage of the bending sensitivity of the HOM guidance. This measurement scheme enabled us to evaluate accurately the performance factors of the fabricated mode filter.     

Holographic grating recorded by He–Ne laser operating at 632.8 nm in polymer film containing push–pull azo dye

Holographic gratings were optically recorded by two beams from a He–Ne laser operating at 632.8 nm in poly (methyl methacrylate) (PMMA) film containing push–pull azo dye. The holographic characteristics of the recorded gratings were dependent on the polarization direction of the recording beams and the relationship between the diffractive signals and the power density of recording beams was investigated. The formation of holographic gratings accompanied by 532 nm (double-frequency of Nd:YAG laser) irradiation was studied in detail. It was found that the effect of 532 nm laser to the holographic grating lay in two aspects. The acceleration effect of 532 nm laser to the formation of holographic grating is predominant when the power density of 532 nm laser is low. While at relatively high power density of 532 nm laser, the erasure is the main factor to the holographic grating. Moreover, the holographic grating was probed by 532 nm laser at low power density and the dependence of the first order diffractive signal on the recording beam power density was also presented.     

Microwave generation using an all polarization-maintaining linear cavity dual-wavelength fiber laser with tunable wavelength spacing

A stable dual-wavelength erbium-doped fiber laser with a linear cavity is formed by a polarization-maintaining uniform fiber Bragg grating (PM-FBG) and a polarization-maintaining linearly chirped fiber Bragg grating (PM-LCFBG), both of which were fabricated on a high-birefringence (Hi-Bi) fiber. Experimental results show stable dual-wavelength lasing operation with a wavelength separation of ∼0.22 nm, which can be tuned down to as small as 0.05 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room-temperature. Microwave signal at frequency of 9.41, 18.03 and 27.46 GHz is achieved by heterodyned the output lasing wavelengths on a photodetector.     

Highly birefringent photonic crystal fiber polarization splitter made of soft glass

A soft glass dual core polarization splitter based on highly birefringent photonic crystal fiber (PCF) is proposed and the full vector finite element method (FEM) is employed to analyze the impacts of structural parameters on birefringence and the coupling length, and simulation results show that high birefringence on the order of 10⁻² can be obtained at 1.55 μm, moreover, hole size, hole pitch and elliptic ratio all affect birefringence and the coupling length. Based on these results, the PCF's structure is optimized to realize a polarization splitter of 282 μm whose largest extinction ratio is around −45.42 dB at 1.55 μm. Meanwhile, the bandwidth at the extinction ratio of −10 dB is about 90 nm, and around 32 nm at −20 dB.     

甲基橙偶氮染料掺杂聚乙烯醇薄膜的光存储特性研究

研究了甲基橙(MO)偶氮染料掺杂聚乙烯醇(PVA)薄膜的光致双折射和全息光存储特性.利用YAG激光二倍频(532nm)作为写入光,He-Ne激光(632.8nm)作为读出光,考察了不同染料浓度薄膜的光致双折射,探讨了光致双折射和泵浦光功率的关系,并实现了全息光存储.阐明了MO/PVA光存储的物理机制.     

Simulative demonstration of soliton pulse stability over the nonlinear regime in a birefringent optical fiber

In this paper, the results of numerical analysis are demonstrated for sech pulse (soliton) propagation in a birefringent optical fiber using computer modeling and simulation. Here, the initial pulse is polarized linearly and guided into the fiber at an angle of 45° to its polarization axes. The birefringence-induced time delay of 200 and 440 ps between X and Y polarization components has been reported at a fiber length of 631.72 km (10 soliton periods) by considering linear and nonlinear regimes, respectively. The Kerr nonlinearity, which stabilizes solitons against spreading due to GVD, also stabilizes them against splitting due to birefringence. A similar fact is true for the birefringent walk-off. Above a certain soliton order (N_th), the evolution scenario is qualitatively different and two orthogonally polarized components of the soliton move with a common group velocity despite their different modal indices or polarization mode dispersion (PMD) at a fiber length of 631.72 km (10 soliton periods) and 1264.344 km (20 soliton periods) over a nonlinear regime at θ≠45°. The physical effect responsible for this type of behavior is the cross-phase modulation (XPM) between the two polarization components.     

Switchable erbium-doped fiber ring laser based on Sagnac loop mirror incorporating few-mode high birefringence fiber

Without the need of any other additional filtering device, a triple-wavelength switchable erbium-doped fiber ring laser based on Sagnac loop mirror incorporating a piece of few-mode high birefringence fiber is newly proposed and experimentally demonstrated. Three potential lasing wavelengths at about 2.0 nm interval with the side mode suppression ratio higher than 40 dB can be switched mainly by adjusting a polarization controller next to the few-mode high birefringence fiber in the Sagnac loop. In addition to the stable single-line lasing operation, simultaneous dual- and triple-line oscillations are also highly stable at room temperature with suppressing the intrinsic homogeneous gain broadening of the erbium-doped fiber.     

Dual-wavelength high-power Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating

We report a high-power dual-wavelength Yb-doped double-clad fiber laser based on a few-mode fiber Bragg grating (FMFBG). The FMFBG was fabricated by using a piece of fiber in a length of fiber with a cutoff wavelength of 1225 nm, which supported two modes at 1060 nm. The laser was pumped by a fiber pigtailed laser diode working at 915 nm. Single-wavelength, dual-wavelength and triple-wavelength laser oscillations were observed when the fiber laser operated under different low pump powers. However, stable dual-wavelength operation was achieved at higher pump power of 3.9 W and remained unchanged until the output power reached 5.67 W under the maximum available pump power of 10.7 W. The laser wavelengths were centered at 1059.12 and 1060.80 nm with a full-width at half-maximum of 37 and 43 pm, respectively. The signal-to-noise-ratio was greater than 50 dB and the beam quality factor (M²) was about 1.9.     

Nondegenerate four-wave mixing in a birefringent optical fiber pumped by a dye laser

An efficient nondegenerate four-wave-mixing process in a highly birefringent optical fiber pumped by a dye laser is reported. The output beam from a dye laser (at ~610 nm) was found to mix with the accompanying superfluorescent light (from 575 to 600 nm) in a birefringent fiber to generate a distinct frequency-shifted beam, which could be Stokes or anti-Stokes radiation, depending on which mode of the fiber was excited. The frequency shift was comparable with that observed in the well-known pump-divided degenerate process, as confirmed by the theory.     

Design of single polarization single mode dispersion compensating photonic crystal fiber

In this paper, we present a photonic crystal fiber based on hexagonal structure for improved negative dispersion as well as high birefringence in the telecom wavelength bands. It is demonstrated that it is possible to obtain negative dispersion coefficient of −712 ps/(nm km) and relative dispersion slope (RDS) perfectly match to that of single mode fiber (SMF) of about 0.0036 nm⁻¹ at the operating wavelength 1550 nm. The proposed fiber exhibits high birefringence of the order 2.11 × 10⁻² with nonlinear coefficient about 57.57 W⁻¹ km⁻¹ at 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest.     

Optical limiting behavior of disperse red 1 dye doped polymer

Measurements of optical limiting response in disperse red 1 dye doped into ethylene propylene diene polymethylene polymer (EPDM) are reported using 532 nm wavelength, 10 ns pulses from a frequency-doubled Nd-YAG laser. The optical limiting behavior of the dye doped polymer was studied by transmission measurement technique at various concentrations. The results reveal that the optical limiting efficiency is dependent on concentration.