A novel spectrophotometric method for the determination of aminophylline in pharmaceutical samples in the presence of methanol

A rapid, simple and sensitive method for the determination of aminophylline (Ami) using sodium 1, 2-naphthoquine-4-sulfonate (NQS) and methanol is established in this paper. It is based on the fact that a russety product can be formed by the reaction between aminophylline (Ami) and sodium 1, 2-naphthoquine-4-sulfonate (NQS) in pH 13.00 buffer solution. When methanol is added to the solution, the sensitivity of the color development reaction between Ami and NQS is improved, and the color of the system of NQS-Ami becomes a salmon pink. Beer's law is obeyed in a range of 4.97-69.5 microg ml(-1) of Ami at the maximum absorption of 453 nm (epsilon=4.87 x 10(3) l mol(-1) cm(-1)). The linear regression equation of the calibration curve is A=0.14458+0.00832C (microg ml(-1)), with a linear regression correlation coefficient of 0.9944. The detection limit is 0.7 microg ml(-1) (3sigma/k), R.S.D. is 1.1% and the recovery rate is in range of 92.5-105%. Furthermore, this method has been successfully applied to the determination of Ami in pharmaceutical samples.     

Study of the sensitization of tetradecyl benzyl dimethyl ammonium chloride for the color development reaction between lysine and sodium 1,2-naphthoquinone-4-sulfonate and the determination of lysine in pharmaceutical and biological samples

A rapid, simple and sensitive method for the determination of lysine (Lys) using sodium 1,2-naphthoquinone-4-sulfonate (NQS) and tetradecyl benzyl dimethyl ammonium chloride (Zeph) is presented in this paper. The method is based on the russety product formed from Lys, NQS and Zeph in a buffer solution of pH 9.60, and the stoichiometric ratio of the product is 1:2:2. Beer's law is obeyed in a range of 0.09-18 microg ml(-1) of Lys at the maximum absorption of 474 nm (epsilon(474) is 8.1 x 10(5)l mol(-1)cm(-1)). The equation of linear regression is A=0.40427+0.06112C, with a linearly correlation coefficient of 0.9972. The limit of detection is 0.07 microg ml(-1), R.S.D. 0.8%, and average recovery rate in a range of 98.9-100.1%. This paper further optimizes the determination of Lys compared with the previous methods, and the reaction mechanism is studied intensively. The proposed method has been successfully applied to the determination of Lys in pharmaceutical and biological samples. The common components as nutritional additives in pharmaceuticals and other compounds in biological samples nearly do not interfere with the proposed method.     

Determination of nifuroxazide and drotaverine hydrochloride in pharmaceutical preparations by three independent analytical methods

Three new, different, simple, sensitive, and accurate methods were developed for quantitative determination of nifuroxazide (I) and drotaverine hydrochloride (II) in a binary mixture. The first method was spectrophotometry, which allowed determination of I in the presence of II using a zero-order spectrum with an analytically useful maximum at 364.5 nm that obeyed Beer's law over a concentration range of 2-10 microg/mL with mean percentage recovery of 100.08 +/- 0.61. Determination of II in presence of I was obtained by second derivative spectrophotometry at 243.6 nm, which obeyed Beer's law over a concentration range of 2-10 microg/mL with mean recovery of 99.82 +/- 1.46%. The second method was spectrodensitometry, with which both drugs were separated on a silica gel plate using chloroform-acetone-methanol-glacial acetic acid (6 + 3 + 0.9 + 0.1) as the mobile phase and ultraviolet (UV) detection at 365 nm over a concentration range of 0.2-1 microg/band for both drugs, with mean recoveries of 99.99 +/- 0.15 and 100.00 +/- 0.34% for I and II, respectively. The third method was reversed-phase liquid chromatography using acetonitrile-water (40 + 60, v/v; adjusted to pH 2.55 with orthophosphoric acid) as the mobile phase and pentoxifylline as the internal standard at a flow rate of 1 mU/min with UV detection at 285 nm at ambient temperature over a concentration range of 2-10 microg/mL for both drugs, with mean recoveries of 100.24 +/- 1.51 and 100.08 +/- 0.78% for I and II, respectively. The proposed methods were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical formulations containing the above drugs with no interference from other dosage form additives. The validity of the suggested procedures was further assessed by applying the standard addition technique which was found to be satisfactory, and the percentage recoveries obtained were in accordance with those given by the EVA Pharma reference spectrophotometric method.     

The surfactant sensitized analytical reaction of cerium(IV) with some triphenylformazan derivatives

Cationic surfactant, cetylpyridinium bromide (CPB), sensitizes the colour reaction of cerium(IV) with 1,3-o-hydroxyphenyl-5-phenylformazan(I), 1-m-hydroxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(II) and 1-m-carboxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(III). The formation of a soluble ternary complex of stoichiometric ratio 1:1:1 (Ce(IV)-R-CPB) is responsible for the observed enhancement in the molar absorptivity and Sandell sensitivity of the formed complex, when a surfactant is present. The ternary complex exhibits absorption maxima at 596, 571 and 607 nm (epsilon=6.05 x 10(4), 6.28 x 10(4) and 8.06 x 10(4)L mol(-1)cm(-1)) using triphenylformazan derivatives I, II and III, respectively. Beer's law is obeyed between 0.15 and 2.5 microg ml(-1), whereas, optimum concentration range applying Ringbom method is in the range 0.30-2.25 microg ml(-1). Conditional formation constants in the presence and absence of CPB for Ce(IV) complexes have been calculated. The proposed method has been successfully applied to the analysis of magnesium-base cerium alloys and synthetic mixtures corresponding to various cerium alloys.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

Spectrophotometric and atomic absorption determination of ramipril, enalapril maleate and fosinopril through ternary complex formation with molybdenum (V)-thiocyanate (Mo(V)-SCN)

Three different sensitive and accurate spectroscopic procedures were developed for the determination of three angiotensin-converting enzyme inhibitors, namely, ramipril, enalapril maleate and fosinopril. The first two spectrophotometric (extractive and non-extractive) procedures were based on ternary complex formation with molybdenum(V) thiocyanate. The formed complex can be determined by extraction with chloroform measured at lambdamax 517 nm Beer's law was obeyed in the concentration range from (10--90 microg ml(-1)) for ramipril and fosinopril and (4--36 microg ml(-1)) for enalapril maleate with molar absorptivity 1.2x10(4), 2x10(4) and 3.4x10(4) l mol(-1) cm(-1), respectively, or by direct measurement after addition of benzalkonium chloride as surfactant and measuring the formed ternary complex at lambdamax 545 nm with a linear relationship in the concentration range from (8-7-2 microg ml(-1)), (3--27 microg ml(-1)) and (8--72 microg ml(-1)) for ramipril, enalapril maleate and fosinopril with molar absorptivity 1.5x10(4), 5x10(4) and 2.1x10(4) l mol(-1) cm(-1), respectively. The third procedure is atomic absorption measurement through the quantitative determination of molybdenum content of the complex. These methods hold their accuracy and precision well when applied to the determination of ramipril, enalapril maleate and fosinopril in their dosage forms.     

Highly sensitive and selective spectrophotometric and spectrofluorimetric methods for the determination of ropinirole hydrochloride in tablets

Three sensitive, selective, accurate spectrophotometric and spectrofluorimetric methods have been developed for the determination of ropinirole hydrochloride in tablets. The first method was based on measuring the absorbance of drug solution in methanol at 250 nm. The Beer's law was obeyed in the concentration range 2.5-24 microg ml(-1). The second method was based on the charge transfer reaction of drug, as n-electron donor with 7,7,8,8-tetracyanoquinodimethane (TCNQ), as pi-acceptor in acetonitrile to give radical anions that are measured at 842 nm. The Beer's law was obeyed in the concentration range 0.6-8 microg ml(-1). The third method was based on derivatization reaction with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in borate buffer of pH 8.5 followed by measuring the fluorescence intensity at 525 nm with excitation at 464 nm in chloroform. Beer's law was obeyed in the concentration range 0.01-1.3 microg ml(-1). The derivatization reaction product of drug with NBD-Cl was characterized by IR, 1H NMR and mass spectroscopy. The developed methods were validated. The following analytical parameters were investigated: the molar absorptivity (epsilon), limit of detection (LOD, microg ml(-1)) and limit of quantitation (LOQ, microg ml(-1)), precision, accuracy, recovery, and Sandell's sensitivity. Selectivity was validated by subjecting stock solution of ropinirole to acidic, basic, oxidative, and thermal degradation. No interference was observed from common excipients present in formulations. The proposed methods were successfully applied for determination of drug in tablets. The results of these proposed methods were compared with each other statistically.     

Quantitative analysis of rabeprazole sodium in commercial dosage forms by spectrophotometry

The main aim of this work is to develop and validate two spectrophotometric methods for the quantitative analysis of rabeprazole sodium in commercial dosage forms. Method A is based on the reaction of drug with 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) in the presence of ammonium cerium(IV) nitrate in acetic acid medium at room temperature to form red-brown product which absorbs maximally at 470 nm. Method B utilizes the reaction of rabeprazole sodium with 1-chloro-2,4-dinitrobenzene (CDNB) in dimethyl sulfoxide (DMSO) at 45+/-1 degrees C to form yellow colored Meisenheimer complex. The colored complex has a characteristic band peaking at 420 nm. Under the optimized reaction conditions, proposed methods are validated as per ICH guidelines. Beer's law is obeyed in the concentration ranges of 14-140 and 7.5-165 microg ml(-1) with linear regression equations of A=6.041 x 10(-4)+1.07 x 10(-2)C and A=1.020 x 10(-3)+5.0 x 10(-3)C for methods A and B, respectively. The limits of detection for methods A and B are 1.38 and 0.75 microg ml(-1), respectively. Both methods have been applied successfully for the estimation of rabeprazole sodium in commercial dosage forms. The results are compared with the reference UV spectrophotometric method.     

Indirect spectrophotometric determination of propranolol hydrochloride and piroxicam in pure and pharmaceutical formulations.

Two simple and sensitive indirect spectrophotometric methods for the assay of propranolol hydrochloride (PPH) and piroxicam (PX) in pure and pharmaceutical formulations have been proposed. The methods are based on the oxidation of PPH by a known excess of standard N-bromosuccinimide (NBS) and PX by ceric ammonium sulfate (CAS) in an acidic medium followed by the reaction of excess oxidant with promethazine hydrochloride (PMH) and methdilazine hydrochloride (MDH) to yield red-colored products. The absorbance values decreased linearly with increasing concentration of the drugs. The systems obeyed Beer's law over the concentration ranges of 0.5 - 12.5 and 0.3 - 16.0 microg/ml for PPH, and 0.4 - 7.5 and 0.2 - 10 microg/ml for PX with PMH and MDH, respectively. Molar absorptivity values, as calculated from Beer's law data, were found to be 1.36 x 10(4) and 2.55 x 10(4) l mol(-1) cm(-1) for PPH, and 2.08 x 10(4) and 2.05 x 10(4) l mol(-1) cm(-1) for PX with PMH and MDH, respectively. The common excipients and additives did not interfere with their determinations. The proposed methods have been successfully applied to the determinations of PPH and PX in various dosage forms. The results obtained by the proposed methods compare favorably with those of official methods.     

Spectrophotometric determination of nickel in vegetable oil with ammonium 2-amino-1-cyclohexene-1-dithiocarboate

The reaction between nickel and ammonium 2-amino-1-cyclohexene-1-dithiocarboate in aqueous acetone medium at pH 3.0-8.0 results in a stable dark red complex. The ratio of reagent to nickel in the complex is 2:1 and the formation constant is 7.38 +/- 0.12 x 10(10). Beer's law is obeyed up to 4 microg/ml nickel at the absorption maximum at 535 nm. The apparent molar absorptivity is 2.8 x 10(4) l.mole(-1). cm(-1), and the detection limit is 10 ng/ml nickel. The method is applied to the determination of nickel in vegetable oil.     

Spectrophotometric determination of nickel with p-acetylarsenazo

A spectrophotometric method for the determination of trace amounts of nickel is described. At pH 6, nickel reacts with p-acetylarsenazo to form a 1:2 coloured complex with an absorption maximum at 630 nm. The apparent molar absorptivity is 6.5 x 10(4) l.mol(-1) . cm(-1) . Beer's law is obeyed over the concentration range of 0-0.8 microg/ml. The proposed method is selective, sensitive and can be applied to the determination of nickel in aluminum alloy.     

Extraction spectrophotometric determination of selenium(IV) with J acid in environmental samples

A new simple and sensitive method for the extraction and spectrophotometric determination of selenium(IV) is described. Selenium(IV) is reacted with J acid (6-ANSA) to form a butanol extractable complex with maximum absorbance of 520 nm. Beer's law is obeyed in the range of 0.03-0.3 mg/l. of selenium. Molar absorptivity and Sandell's sensitivity are found to be 18.5 +/- (0.1) x 10(3) l. mol(-1). cm(-1) and 0.004 microg/cm(2), respectively. The analytical parameters were optimized and the method applied for the determination of selenium in polluted water, soil, dust, hair and plant materials. The method is compared with other reported methods and found to be superior to many of the reported methods.     

Spectrophotometric determination of glucosamine and its analogous amino sugars with o-hydroxyhydroquinonephthalein and palladium(II).

A simple and highly sensitive spectrophotometric method for the determination of glucosamine and its analogous amino sugars was established based on fading of the palladium(II)-o-hydroxyhydroquinonephthalein-hexadecyltrimethylammonium complex. In the determination of glucosamine, Beer's law is obeyed in the range of 0.02 - 0.18 microg ml(-1), with an effective molar absorptivity at 630 nm and the relative standard deviation being 8.4 x 10(5) dm3 mol(-1) cm(-1) and 1.08% (n = 10). This method is about 70-times more sensitive than the Elson-Morgan method. The method was successfully applied to the assay of glucosamine in actual samples.     

Synthesis of N-o-methylphenyl-N'-(sodium p-aminobenzene-sulfonate) thiourea and its chromogenic reaction with palladium(II).

A new chromogenic reagent, N-o-methylphenyl-N'-(sodium p-aminobenzenesulfonate)thiourea (MSAT), has been synthesized and characterized by elemental analysis, (1)H-NMR, FT-IR and UV-Vis spectra. Based on the absorption spectrum of the colored complex of MSAT with palladium(II), a novel spectrophotometric method for the determination of palladium has been developed. In a pH 4.0 - 5.5 HAc-NaAc buffer solution, palladium(II) reacted with MSAT to form a stable yellow water-soluble complex with an apparent molar absorptivity of epsilon = 2.04 x 10(5) L mol(-1) cm(-1) at the maximum absorption of 318.0 nm. Beer's law was obeyed in the concentration range of 1.2 - 11.8 microg per 25 mL for palladium(II) with a correlation coefficient of 0.9997. The probable interfering ions and their tolerable limits have also been investigated in detail. The proposed method is simple, rapid, and sensitive, and has been applied to the determination of palladium in anode mud and ore samples with satisfactory results.     

Colour reaction of free chlorine with p-amino-N,N-diethylaniline in the presence of alcohol and its analytical application

A simple, precise, rapid-colour-forming and stable spectrometric method has been developed for determining free chlorine in water. p-Amino-N,N-diethylaniline reacts with free chlorine almost instantaneously in the presence of alcohol to form a red oxidized product with absorption maximum at 513 nm. Beer's law is obeyed in the free chlorine concentration range of 0-2 microg ml(-1). The molar absorptivity is 1.79 x 10(4) l mol(-1) cm(-1), limit of detection 0.0036 microg ml(-1), relative standard deviation 1.51%, and amount of free chlorine 7 microg. The colour reaction rate and absorbance are independent of temperature in the range 3-45 degrees C and the stable absorptivity lasts for at least 1 h. The method is satisfactory for the determination of free chlorine in aqueous solution.     

Spectrophotometric determination of anthracycline anticancer agents with aluminum(III) and chromazurol S in a nonionic surfactant micellar medium.

A simple and highly sensitive spectrophotometric method for the determination of anthracycline anticancer agents, such as Daunorubicin hydrochloride (DAU), was established by using aluminum(III) and Chromazurol S (CAS) in a nonionic surfactant micellar medium. In the case of determination of DAU, the apparent molar absorptivity was 1.3 x 10(5) dm3 mol(-1) cm(-1) at 615 nm. Beer's law was obeyed in the concentration range of 0.028 - 2.82 microg ml(-1) for DAU. Owing to no need for solvent extraction, this method could be applied to assays of DAU and related drugs in pharmaceutical preparations.     

Spectrophotometric determination of uric acid based on fading of o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethyl-ammonium complex.

A simple and highly sensitive spectrophotometric method for the determination of uric acid (UA) was established based on fading of the o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethylammonium complex. In the determination of UA, Beer's law is obeyed in the range of 0.01-0.20 microg ml(-1), with an effective molar absorptivity at 635 nm, the relative standard deviation being 6.5 x 10(5) dm(3) mol(-1) cm(-1) and 1.5% (n = 5). This method is about 20-times more sensitive than the conventional methods. The method was successfully applied to the assay of UA in human urine.     

Spectrophotometric and potentiometric determination of piroxicam and tenoxicam in pharmaceutical preparations

Two simple and accurate methods are described for the determination of piroxicam and tenoxicam in their pharmaceutical preparations. The spectrophotometric method involves the oxidation of these drugs with potassium iodate in acid medium with the liberation of iodine and subsequent extraction with cyclohexane followed by measuring the absorbance at lambda=522 nm. Beer's law is obeyed in the concentration range of 0.05-1.1 and 0.05-0.6 mg x ml(-1) for piroxicam and tenoxicam, respectively. The apparent molar absorptivities of the resulting coloured products are found to be 2.7 x 10(3) and 2.5 x 10(3) l mol(-1) x cm(-1), whereas Sandell sensitivities are 0.012 and 0.013 g x cm(-2) for piroxicam and tenoxicam, respectively. The potentiometric method involves the direct titration of both drugs with N-bromosuccinimide in acid medium and the end point is determined potentiometrically using platinum indicator electrode. Piroxicam and tenoxicam can be determined quantitatively in the concentration range of 0.33-3.37 and 0.33-4.08 mg x ml(-1) for tenoxicam and piroxicam, respectively. The standard deviation and relative standard deviation values are found to be ranged from 0.05-0.07 and 0.37-0.98% and 0.025-0.078 and 0.25-1.2% for tenoxicam and piroxicam, respectively. The two methods are accurate within +/-1.0%. Optimum conditions affecting both methods are studied. The proposed methods are applied for the determination of the drugs in pure form and in commercial pharmaceutical preparations.     

Spectrophotometric determination of trace copper in water samples with thiomichlersketone

A simple and sensitive spectrophotometric method for determination of trace copper in water samples is proposed. In the presence of pH 4.6 HAc-NaAc buffer solution and surfactant polyethylene octyl phenyl ether (OP) medium, copper reacts with thiomichlersketone (TMK) to form a stable 1:4 complex. The complex Cu(II)-TMK-OP shows maximum absorbance at 500 nm with a molar absorptivity value of 5.7x10(4) l mol-1 cm-1. Beer's law is obeyed for copper concentrations in the range of 0-15 microg/25 ml. The average recovery of copper is between 95.8 and 106%. The method has been applied for determination of trace copper in different water samples with satisfactory results.     

Spectrophotometric determination of four macrolide antibiotics in pharmaceutical formulations and biological fluids via binary complex formation with eosin [corrected

A simple, rapid, and sensitive validated spectrophotometric method was developed for the determination of certain macrolide antibiotics namely, erythromycin (I), azithromycin dihydrate (II), clarithromycin (III), and roxithromycin (IV) in bulk powders, pharmaceutical formulations, and spiked biological fluids. The proposed method is based on the formation of a binary complex between each of the studied drugs and eosin Y in aqueous buffered medium. Under the optimum conditions, the binary complexes showed absorption maxima at 542-544 nm. The absorbance of the binary complexes obeyed Beer's law over the concentration range of 1-10 micro/g/mL for II, 2-20 microg/mL for I and IV, and 3-30 microg/mL for III. The mean percentage recoveries were 100.04 +/- 0.83, 99.98 +/- 0.80, 100.17 +/- 0.91, and 99.55 +/- 0.91, with minimum detectable molarities of 2 x 10(-7) for I and II, 4 x 10(-7) for III, and 3 x 10(-7) for IV. The different experimental parameters affecting the development and stability of the colors were studied and optimized. The proposed method was successfully applied to the analysis of the cited drugs in some pharmaceutical formulations. The results obtained were in good agreement with those obtained using the reference methods. The proposed method was further applied to spiked human urine and plasma. A proposal of the reaction pathway is suggested.