Simultaneous GC-MS quantitation of acids and sugars in the hydrolyzates of immunostimulant, water-soluble polysaccharides of basidiomycetes

Summary The simultaneous quantitation of acids and sugars as their trimethyl silyl (TMS) derivatives has been extended in order to identify and quantitate the simple acid and sugar constituents in the hydrolyzates of various immunostimulant, water-soluble polysaccharides obtained from various Basidiomycetes, such as Armillariella mellea, Auricularia auricula-judae, Coriolus versicolor, Flammulina velutipes, Fomes fomentarius, Ganoderma applanatum, Ganoderma lucidum, Pleurotus ostreatus, Schizophyllum commune, Trametes hirsuta. Optimum hydrolysis conditions, performed with 2 M trifluoroacetic acid (TFAA) for five hrs, proved the presence of several sugars and acids with maximum recovery. (i) the total sugar/sugar alcohol content of polysaccharides varied between 20- and 65% and consisted of arabitol (0.01–10.2%), arabinose (0.09–1.3%), ribose (0.2–1.8%), fucose (0.3–1.2%), mannitol (0.01–5.3%), sorbitol (0.01–0.05%), galactiol (0.04%), fructose (0.08–0.8%), galactose (0.9–29%), glucose (10–53%), uronic acids (0.14–3.7%), sucrose (0.03–2%), trehalose (0.2–1%), cellobiose (0.01–0.6%), maltose (0.2–1.9%), other disaccharides (0.2–8%). (ii) The total of acids varied from 1.5 to 30% including o-phosphoric (1.3–19%), malic (0.08–4.7%), citric (0.08–4.7%), isocitric; (3%) and C₁₆−C₁₈ fatty acids (1–6%).     

Synthesis of Amido- and Diamidophosphites with Polyfluoroalkyl Substituents

Bis(polyfluoroalkyl) chlorophosphites and polyfluoroalkyl dichlorophosphites react easily with secondary amines (from –40 to –22°C, 1–3 h, CH2Cl2) in the presence or absence of triethylamine to form the corresponding bis(polyfluoroalkyl) diorganylamidophosphites or bis(diorganylamido) polyfluoroalkyl phosphites in the yield of up to 74%. Bis(polyfluoroalkyl) diorganylamidophosphites were also synthesized from diorganylamidodichlorophosphites and polyfluoroalkanols (–25 to –22°C, 2 h, Et3N–CH2Cl2) with a yield of 56–60%.     

Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy

Thermogravimetric (TG), differential thermal analysis (DTA) and thermal degradation kinetics, FTIR and X-ray diffraction (XRD) analysis of synthesized glycine–montmorillonite (Gly–MMT) and montmorillonite bound dipeptide (Gly–Gly–MMT) along with pure Na–MMT samples have been performed. TG analysis at the temperature range 25–250 °C showed a mass loss for pure Na–MMT, Gly–MMT and Gly–Gly–MMT of about 8.0%, 4.0% and 2.0%, respectively. DTA curves show the endothermic reaction at 136, 211 and 678 °C in pure Na–MMT whereas Gly–MMT shows the exothermic reaction at 322 and 404 °C and that of Gly–Gly–MMT at 371 °C. The activation energies of the first order thermal degradation reaction were found to be 1.64 and 9.78 kJ mol⁻¹ for Gly–MMT and Gly–Gly–MMT, respectively. FTIR analyses indicate that the intercalated compounds decomposed at the temperature more than 250 °C in Gly–MMT and at 250 °C in Gly–Gly–MMT.     

XRF Analysis of Microsamples of Semiconductor Type Multielement Materials by the Thin Layer Method. Determination of Cr, Co, Ni, Cu, Zn, Ga, Se, Sb, Yb

 A simple and quick method of durable samples preparation by the thin layer method through direct digesting of the analysed material on the substrate has been presented. Four- and three-component mono- and polycrystals have been analysed. Standards have been used in calibration containing: Cr, Co, Ni, Cu, Zn, Ga, Se, Sb, Yb. To improve the correlation between the concentration and the fluorescent radiation models of mathematical corrections have additionally been used: multiple linear regression, Lucas-Tooth-Pyne model (L. T. P.) and de Jongh model (d. J.). Statistical parameters: detection limits for 0.5 mg samples: Cr–0.041%, Co–0.034%, Ni–0.042%, Cu–0.053%, Zn–0.054%, Ga–0.057%, Se–0.057%, Sb–0.113%, Yb–0.077%. Correlation coefficients: simple regression 0.9946–0.9997, multiple regression 0.9974–1.0000, L. T. P. 0.9993–1.0000, d. J. 0.9995–1.0000. Received August, 1, 1998. Revision March 25, 1999.     

Resonance light-scattering method for the determination of BSA and HSA with sodium dodecyl benzene sulfonate or sodium lauryl sulfate

A new resonance light-scattering (RLS) assay of proteins such as bovine serum albumin (BSA) and human serum albumin (HSA) is presented. In the medium of phosphoric acid (pH=2.6), the weak RLS of sodium dodecyl benzene sulfonate (SDBS) or sodium lauryl sulfate (SLS) can be greatly enhanced by proteins, owing to interaction between the protein and the anionic surfactant and formation of an associate. The RLS intensity of the SDBS–protein system is stronger than that of the SLS–protein system under same experimental conditions. It is considered that the synergistic resonance caused by the absorption of both protein and SDBS could produce strong RLS, while absorption of protein only in the SLS system could cause relatively weak RLS. The enhanced intensity of RLS is proportional to the concentration of the protein. If SDBS is used as the probe the linear range is 7.5×10^–9–1.5×10^–5 g mL^–1 for BSA and 1.0×10^–8–1.0×10^–5 g mL^–1 for HSA. The detection limits are 1.8 and 2.8 ng mL^–1, respectively. When SLS is used as the probe the linear range is 2.0×10^–8–1.0×10^–5 g mL^–1 and 2.5×10^–8–1.0×10^–5 g mL^–1 for BSA and HSA, respectively, and the detection limits are 12.8 and 21.6 ng mL^–1, respectively. The biological mimics samples are synthetic concoctions of BSA and HSA with some interferents. In these samples, the concentration of interferents is higher than the concentration normally existing in organisms. The samples were determined satisfactorily.     

Constant-volume combustion energy of the lead salts of 2HDNPPb and 4HDNPPb and their effect on combustion characteristics of RDX–CMDB propellant

The constant-volume combustion energies of the lead salts of 2-hydroxy-3,5-dinitropyridine (2HDNPPb) and 4-hydroxy-3,5-dinitropyridine (4HDNPPb), ΔU _c (2HDNPPb(s) and 4HDNPP(s)), were determined as –4441.92±2.43 and –4515.74±1.92 kJ mol^–1 , respectively, at 298.15 K. Their standard enthalpies of combustion, Δ_c ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K), and standard enthalpies of formation, Δ_r ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K) were as –4425.81±2.43, –4499.63±1.92 kJ mol^–1 and –870.43±2.76, –796.65±2.32 kJ mol^–1 , respectively. As two combustion catalysts, 2HDNPPb and 4HDNPPb can enhance the burning rate and reduce the pressure exponent of RDX–CMDB propellant.     

Chemical deposition and characterization of thin polypyrrole films on glass plates: role of organosilane treatment

 Thin chloride-doped polypyrrole films (PPyCl) were deposited chemically onto untreated and silane-treated planar glass plates from aqueous solutions. The organosilanes used to treat the glass substrates were methyltriethoxysilane (Cl), propyltrimethoxysilane (C3), octyltrimethoxysilane (C8) and aminopropyltriethoxysilane (APS). The decreasing order of hydrophobic character of silane-treated glass slides, as measured by water contact angle measurements, was glass–APS ≅ glass–C8 > glass–C3 > glass–C1 > glass. X-ray photoelectron spectroscopy was used to determine the surface chemical composition of the glass plates before and following coating with the silane coupling agents and/or the PPy thin layer, respectively. The attenuation in intensity of the glass Na_{1 s} peak enabled the average thickness of the various organosilane overlayers to be estimated. Atomic force microscopy showed that the morphology of the organosilane overlayers was islandlike. The domains have a structure which depends upon the nature of the organosilane in question. Scanning electron microscope images showed that the morphology of the PPyCl thin films was homogeneous when coated onto glass–APS and glass–C8, but wrinkled at the surface of glass, glass–C1 and glass–C3 plates. Qualitative peel tests using 3M adhesive tape showed very good adhesion of PPyCl to the glass–APS substrate, whereas adhesion was fairly poor in the case of glass–PPy and PPy–alkylsilane–glass interfaces. The results of this multitechnique study suggest that hydrophobic interactions are important to obtain homogeneous and continuous thin PPy films, but Lewis acid–base interactions are the driving forces for strong and durable PPy–glass adhesion. Received: 3 January 2000/Accepted: 19 May 2000     

Influence of Second-Order Lines on the Quantitative Wavelength Dispersive Spectrometry Analysis at Low Accelerating Voltages

The study covers a problem frequently encountered in the quantification of the results of wavelength-dispersive spectrometry (WDS) for the composition analysis of thin films. The characteristics of a Parallel Beam Spectrometer and traditional WDS systems were examined and olivine mineral – (Mg, Fe)₂SiO₄ (O – 44.03 wt%, Mg – 31.1 wt%, Si – 19.56 wt%, Fe – 5.06 wt%, Ni – 0.16 wt%, Mn – 0.09 wt%) was used as a reference material. Low accelerating voltage at 7 kV and beam current 400 nA were applied. Both methods yielded 30–35% of Mn. This is attributed to the overlapping of the MnLα first-order and the MgKα second-order lines. Studies of the influences of the second- and the third-order lines show that the second-order lines from Kα and Lα X-ray counts affected significantly the obtained WDS spectra when the influence of Mα counts was insignificant. Furthermore, the third-order lines did not have a marked effect on the analysis results.     

Synthesis and Electrochemical Behavior of Some 1H-3-Methyl-4-ethoxycarbonyl-5-(benzylidenehydrazino)pyrazoles

Summary. 1H-3-Methyl-4-ethoxycarbonyl-5-(benzylidenehydrazino)pyrazoles are key intermediates in obtaining various heterocyclic systems including pyrazolotriazoles. We present the voltammetric behavior of these compounds in nonaqueous media, with the following para substituents grafted on the benzene ring: –N(CH₃)₂, –OH, –OCH₃, –F, –Cl, –CF₃, –NO₂, as well as of the novel compounds with –Br, –I, and –SCH₃ in the para position, in order to elucidate the influence of the various substituents on the mechanism of anodic oxidation.     

A rapid automated method for wine analysis based upon sequential injection (SI)-FTIR spectrometry

A new process control methodology for the simultaneous determination of sugars, alcohols and organic acids in wine based on multivariate evaluation of mid-IR transmission spectra of wine samples is presented. In addition to ethanol several lower level wine components (glucose, fructose, glycerol, citric-, tartaric-, malic-, lactic- and acetic acid) were determined. To establish a multivariate calibration model a set of 72 calibration solutions was prepared and measured, using a novel, fully automated sequential injection (SI) system with Fourier transform infrared (FTIR) detection. The resulting spectra were evaluated using a partial least square (PLS) model. The developed PLS model was then applied to the analysis of real wine samples containing 79–91 g L^–1 ethanol, 5.9–8.1 g L^–1 glycerol, 0.4–6.9 g L^–1 glucose, 1.5–7.5 g L^–1 fructose, 0.3–1.6 g L^–1 citric acid, 1.0–1.7 g L^–1 tartaric acid, 0.02–3.2 g L^–1 malic acid, 0.4–2.8 g L^–1 lactic acid and 0.15–0.60 g L^–1 acetic acid, yielding results which were in good agreement with those obtained by an external reference method (HPLC-IR). The short analysis time (less than 3 min) together with high reproducibility makes the newly developed method applicable to process control and screening purposes (average of the standard deviations calculated from four repetitive measurements of six different real samples: ethanol: 0.55 g L^–1, glycerol: 0.037 g L^–1, glucose: 0.056 g L^–1, fructose: 0.036 g L^–1, citric acid: 0.020 g L^–1, tartaric acid: 0.010 g L^–1, malic acid: 0.052 g L^–1, lactic acid: 0.012 g L^–1 and acetic acid: 0.026 g L^–1). Received: 21 January 1998 / Revised: 5 March 1998 / Accepted: 6 March 1998     

Synthesis and Electrochemical Behavior of Some 1H-3-Methyl-4-ethoxycarbonyl-5-(benzylidenehydrazino)pyrazoles

1H-3-Methyl-4-ethoxycarbonyl-5-(benzylidenehydrazino)pyrazoles are key intermediates in obtaining various heterocyclic systems including pyrazolotriazoles. We present the voltammetric behavior of these compounds in nonaqueous media, with the following para substituents grafted on the benzene ring: –N(CH₃)₂, –OH, –OCH₃, –F, –Cl, –CF₃, –NO₂, as well as of the novel compounds with –Br, –I, and –SCH₃ in the para position, in order to elucidate the influence of the various substituents on the mechanism of anodic oxidation.     

Chemical variation in leaf oils of Pistacia chinensis from five locations in China

Hydrodistilled leaf oils of Pistacia chinensis Bunge from five locations in China were analyzed using GC/MS. A total of 58 compounds was identified in the oils, and a relatively high variation in their contents was found. The major compounds include β-phellandrene (0.54–53.86%), α-pinene (4.74–54.44%), β-pinene (0.49–42.90%), caryophyllene (5.64–20.01%), cis-ocimene (tr−43.93%), eudesmadiene (0–15.06%), and camphene (tr−20.57%). Cluster analysis classified the leaf oils into two chemotypes: one rich in α-pinene and β-pinene, and the other rich in β-phellandrene. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 341–343, July–August, 2006.     

Composition and ethanol production potential of cotton gin residues

Cotton gin residue (CGR) collected from five cotton gins was fractionated and characterized for summative composition. The major fractions of the CGR varied widely between cotton gins and consisted of clean lint (5–12%), hulls (16–48%), seeds (6–24%), motes (16–24%), and leaves (14–30%). The summative composition varied within and between cotton gins and consisted of ash (7.9–14.6%), acid-insoluble material (18–26%), xylan (4–15%), and cellulose (20–38%). Overlimed steam-exploded cotton gin waste was readily fermented to ethanol by Escherichia coli KO11. Ethanol yields were feedstock and severity dependent and ranged from 58 to 92.5% of the theoretical yields. The highest ethanol yield was 191 L (50 gal)/t, and the lowest was 120 L (32 gal)/t.     

Flow injection chemiluminescence determination of medazepam

A new flow injection chemiluminescence method for the assay of medazepam is explored. The method involves the use of permanganate in sulfuric acid for the oxidation of medazepam with the emission of chemiluminescence detected by a photomultiplier tube. A simplex procedure was employed for optimising the conditions for high sensitivity detection, which were found to be 1.03 × 10^–3 mol L^–1 permanganate, 0.153 mol L^–1 sulfuric acid and 3.43 mL min^–1 flow rate. The linear calibration range was 3.7 × 10^–5 to 1.7 × 10^–3 mol L^–1. The detection limit (3σ) and the sample throughput were 1.85 × 10^–5 mol L^–1 and 100 per hour, respectively. The relative standard deviation for 5 replicate determinations of 1.9 × 10^–4 mol L^–1 medazepam was 0.15%. Common excipients (starch, glucose, maltose, lactose) used in pharmaceutical preparations had no effect. Received: 2 February 1998 / Revised: 20 May 1998 / Accepted: 25 May 1998     

LC Determination of Four Isoflavone Aglycones in Red Clover (Trifolium pratense L.)

Red clover (Trifolium pratense L.) is an important forage plant that contains the isoflavones daidzein, genistein, formononetin, and biochanin A. These compounds have been studied lately due to their human health benefits. The aim of this study was to develop and validate an HPLC method with simplified sample preparation to quantify daidzein, genistein, formononetin and biochanin A simultaneously in red clover leaves. The validation showed that the method is specific, accurate, precise and robust, not to mention that the sample preparation is easier and faster than those described earlier. The response was linear over a range of 0.01–0.2 μg mL⁻¹ for daidzein, 0.05–0.5 μg mL⁻¹ for genistein, 4–40 μg mL⁻¹ for formononetin and 2–20 μg mL⁻¹ for biochanin A. The range of recoveries was 85.6–101.0%. The RSD for intra- and inter-day precision were <2.54 and <7.22%, respectively. Five populations of red clover, from the National Plant Germplasm System-USDA were analyzed and the content of daidzein, genistein, formononetin and biochanin A ranged from 7.87–91.31, 51.60–131.30, 6568.33–23461.82, to 2499.55–10337.33 μg g⁻¹ of dried material, respectively.     

Quantification of human and veterinary antibiotics in water and sediment using SPE/LC/MS/MS

An analytical method was developed and tested for four different groups of veterinary antibiotics in both river water and sediment matrices. Solid phase extraction (SPE) was used to enrich and to clean up the aqueous sample. Also, Mcllvaine and ammonium hydroxide buffer solutions were used to extract the compounds from the sediment matrix. High performance liquid chromatography (HPLC) equipped with tandem mass spectrometry (MS/MS) was used to separate and quantify the samples. The range of recoveries (in percent) for tetracyclines (TCs), sulfonamides (SAs), macrolides (MLs), and ionophore polyethers (IPs) in the water matrix were 102.2–124.8, 76.6–124.3, 89.5–114.7, 82.7–117.5 with 1–13 (%) of relative standard deviation respectively with three different concentrations. For sediment, the percent recovery ranges were 32.8–114.8, 62.4–108.9, 53.4–128.4 and 51.3–105.4 for TCs, SAs, MLs and IPs, respectively. The relative standard deviation ranged from 16 – 27 (%) over three different concentrations. The limit of quantification (LOQ) was determined by two different methods and calculated to be in the range of 0.01–0.04 μg/l and 0.3–2.5 μg/kg for TCs, SAs, and MLs in water and sediment, respectively. For IPs, the LOQ was 0.001–0.003 μg/l in river water and 0.4–3.6 μg/kg for sediment. The sediment concentration measured in an agriculture-influenced river was much higher than in the overlying water matrix, indicating a high degree of sediment partitioning for these compounds.     

Volcano correlations for the reactivity of surface-confined cobalt N<Subscript>4</Subscript>-macrocyclics for the electrocatalytic oxidation of 2-mercaptoacetate

We have investigated the electrocatalytic activity of several substituted and unsubstituted cobalt–phthalocyanines of substituted tetraphenyl porphyrins and of vitamin B₁₂, for the electro-oxidation of 2-mercaptoacetate, with the complexes pre-adsorbed on a pyrolytic graphite electrode. Several N4-macrocyclic were used to have a wide variety of Co(II)/(I) formal potentials. The electrocatalytic activity, measured as current at constant potential, increases with the Co(II)/(I) redox potential for porphyrins as Co–pentafluorotetraphenylporphyrin < Co–tetrasulfonatotetraphenylporphyrin < Co-2,2′,2″,2‴tetra-aminotetraphenylporphyrin and decreases for cobalt phthalocyanines as Co-3,4-octaethylhexyloxyphthalocyanine > Co–octamethoxyphthalocyanine > Co–tetranitrophthalocyanine Co–tetraaminophthalocyanine > Co–unsubstituted phthalocyanine > Co–tetrasulfonatophthalocyanine > Co–perfluorinated phthalocyanine. Vitamin B₁₂ exhibits the maximum activity. A correlation of log I (at constant potential) versus the Co(II)/(I) formal potential of the catalysts gives a volcano curve. This clearly shows that the search for better catalysts for this reaction point to those N₄-macrocyclic complexes with Co(II)/(I) formal potentials close to −0.84 V versus SCE, which correspond to an optimum situation for the interaction of the thiol with the active site. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

INAA application in the age dynamics assessment of Br,Ca, Cl,K, Mg,Mn, and Na content in the normal human prostate

The effect of age on chemical element contents in intact prostate of 64 apparently healthy 13–60 years old men was investigated by neutron activation analysis with high resolution spectrometry of short-lived radionuclides. Mean values (M ± SΕΜ) for content (mg/kg, dry weight basis) of chemical elements were: Br–31.6 ± 3.2, Ca–2150 ± 160, Cl–12670 ± 675, K–12010 ± 400, Mg–1150 ± 75, Mn–1.56 ± 0.09, and Na–10520 ± 340, respectively. A tendency of age-related increase in Ca content and decrease in Mn content was observed.     

Mixed conductivity and stability of A-site-deficient Sr(Fe,Ti)O<Subscript>3–δ</Subscript> perovskites

Deficiency in the A sublattice of perovskite-type Sr_{1– y} Fe_0.8Ti_0.2O_3–δ (y=0–0.06) leads to suppression of oxygen-vacancy ordering and to increasing oxygen ionic conductivity, unit cell volume, thermal expansion, and stability in CO₂-containing atmospheres. The total electrical conductivity, predominantly p-type electronic in air, decreases with increasing A-site deficiency at 300–700 K and is essentially independent of the cation vacancy concentration at higher temperatures. Oxygen ion transference numbers for Sr_{1– y} Fe_0.8Ti_0.2O_3–δ in air, estimated from the faradaic efficiency and oxygen permeation data, vary in the range from 0.002 to 0.015 at 1073–1223 K, increasing with temperature. The maximum ionic conductivity was observed for Sr_0.97Fe_0.8Ti_0.2O_3–δ ceramics. In the system Sr_0.97Fe_{1– x} Ti _x O_3–δ (x=0.1–0.6), thermal expansion and electron-hole conductivity both decrease with x. Moderate additions of titanium (up to 20%) in Sr_0.97(Fe,Ti)O_3–δ result in higher ionic conductivity and lower activation energy for ionic transport, owing to disordering in the oxygen sublattice; further doping decreases the ionic conduction. It was shown that time degradation of the oxygen permeability, characteristic of Sr(Fe,Ti)O_3–δ membranes and resulting from partial ordering processes, can be reduced by cycling of the oxygen pressure at the membrane permeate side. Thermal expansion coefficients of Sr_{1– y} Ti_{1– x} Fe _x O_3–δ (x=0.10–0.60, y=0–0.06) in air are in the range (11.7–16.5)×10^–6 K^–1 at 350–750 K and (16.6–31.1)×10^–6 K^–1 at 750–1050 K. Electronic Publication     

Crystal Structure and Conformation of a 10-Thiabilirubin

 A crystal structure determination of a bilirubin analog with a sulfur instead of a C(10)–CH₂ linking the two dipyrrinones is reported. Conformation-determining torsion angles and key hydrogen bond distances and angles are compared to those obtained from molecular dynamics calculations as well as to the corresponding data from X-ray determinations and molecular dynamics calculations of bilirubin. Like other bilirubins, the component dipyrrinones of the analog are present in the bis-lactam form with (Z)-configurated double bonds at C(4) and C(15). Despite the large differences in bond lengths and angles at –S–vs.–CH₂–, the crystal structure shows considerable similarity to bilirubin: both pigments adopt a folded, intramolecularly hydrogen-bonded ridge-tile conformation stabilized by six hydrogen bonds – although the interplanar angle of the ridge-tile conformation of the title compound is smaller (∼ 86°) than that of bilirubin (∼ 98°). The collective data indicate that even with long C–S bond lengths and a smaller C–S–C bond angle at the pivot point on the ridge-tile seam, intramolecular hydrogen bonding persists.