Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

Large ground-state entropy changes for hydrogen atom transfer reactions of iron complexes

Reported herein are the hydrogen atom transfer (HAT) reactions of two closely related dicationic iron tris(alpha-diimine) complexes. FeII(H2bip) (iron(II) tris[2,2'-bi-1,4,5,6-tetrahydropyrimidine]diperchlorate) and FeII(H2bim) (iron(II) tris[2,2'-bi-2-imidazoline]diperchlorate) both transfer H* to TEMPO (2,2,6,6-tetramethyl-1-piperidinoxyl) to yield the hydroxylamine, TEMPO-H, and the respective deprotonated iron(III) species, FeIII(Hbip) or FeIII(Hbim). The ground-state thermodynamic parameters in MeCN were determined for both systems using both static and kinetic measurements. For FeII(H2bip) + TEMPO, DeltaG degrees = -0.3 +/- 0.2 kcal mol-1, DeltaH degrees = -9.4 +/- 0.6 kcal mol-1, and DeltaS degrees = -30 +/- 2 cal mol-1 K-1. For FeII(H2bim) + TEMPO, DeltaG degrees = 5.0 +/- 0.2 kcal mol-1, DeltaH degrees = -4.1 +/- 0.9 kcal mol-1, and DeltaS degrees = -30 +/- 3 cal mol-1 K-1. The large entropy changes for these reactions, |TDeltaS degrees | = 9 kcal mol-1 at 298 K, are exceptions to the traditional assumption that DeltaS degrees approximately 0 for simple HAT reactions. Various studies indicate that hydrogen bonding, solvent effects, ion pairing, and iron spin equilibria do not make major contributions to the observed DeltaS degrees HAT. Instead, this effect arises primarily from changes in vibrational entropy upon oxidation of the iron center. Measurement of the electron-transfer half-reaction entropy, |DeltaS degrees Fe(H2bim)/ET| = 29 +/- 3 cal mol-1 K-1, is consistent with a vibrational origin. This conclusion is supported by UHF/6-31G* calculations on the simplified reaction [FeII(H2N=CHCH=NH2)2(H2bim)]2+...ONH2 left arrow over right arrow [FeII(H2N=CHCH=NH2)2(Hbim)]2+...HONH2. The discovery that DeltaS degrees HAT can deviate significantly from zero has important implications on the study of HAT and proton-coupled electron-transfer (PCET) reactions. For instance, these results indicate that free energies, rather than enthalpies, should be used to estimate the driving force for HAT when transition-metal centers are involved.     

Effects of solvent on the relative stability of mono and di-aluminium aryloxide complexes of bipyridines: anomalous behavior of [(tBu)2Al(OPh)]2(mu-4,4-bipy)

The temperature dependence of the solution equilibrium constants for [((t)Bu)(2)Al(OPh)]2(mu-4,4'-bipy)(1a), [((t)Bu)2Al(OPh)](2)(mu-bipetha)(2a, bipetha = 1,2-bis(4-pyridyl)ethane), and [((t)Bu)(2)Al(OPh)]2(mu-bipethe)(3a, bipethe =trans-1,2-bis(4-pyridyl)ethylene) in C6D6 and CDCl(3) allow for the determination of DeltaH and DeltaS for the dissociation of one Al(tBu)2OPh moiety from the bridging ligand, i.e., 2[(tBu)2AL(OPh)]2(mu-L)<==>(K1)2AL(OPh)(tBu)2(L)+[(tBu)2Al(mu-OPh)]2. For compounds and the DeltaH values in C6D6[99(2) kJ mol(-1)(2a) and 109(5) kJ mol(-1)(3a)] and CDCl3[115(5) kJ mol(-1)(2a) and 139(7) kJ mol(-1)(3a)] were found to be inversely proportional with the dielectric constant of the solvent. In contrast, the DeltaH value for 1a in CDCl3 is surprisingly small [14.9(7) kJ mol(-1)] and does not fit with the trends adopted by the bipetha and bipethe derivatives or the value obtained in C6D6[110(2) kJ mol(-1)]. Unlike the other compounds and the C6D6 solutions, the CDCl3 solution of 1a allows for the observation of a second equilibrium 2Al(OPh)(tBu)2(L)<==>(K2)[(tBu)2Al(mu-OPh)]2+2L, for which the DeltaH has been determined [4.5(3) kJ mol(-1)]. This result suggests that in CDCl3 bonding of the second Al(tBu)2OPh moiety to Al(OPh)(tBu)2(4,4'-bipy)(1b) is stabilized by the presence of the first aluminium, which is counter to ab initio calculations that predicts the aluminium in Al(OPh)((t)Bu)2(L) should destabilize the Al-N interaction with a second Al(tBu)2OPh group. The BDE for dissociation of both Al(tBu)2OPh moieties from 1a-3a, and the energy of formation of hydrogen bond interactions with CHCl3, has been calculated by ab initio methods, and no unusual effects are inherent in 1a.     

A para-hydrogen investigation of palladium-catalyzed alkyne hydrogenation

The complexes [Pd(bcope)(OTf)2] (1a), where bcope is (C8H14)PCH2-CH2P(C8H14), and [Pd(tbucope)(OTf)2] (1b), where tbucope is (C8H14)PC6H4CH2P(tBu)2, catalyze the conversion of diphenylacetylene to cis- and trans-stilbene and 1,2-diphenylethane. When this reaction was studied with para-hydrogen, the characterization of [Pd(bcope)(CHPhCH2Ph)](OTf) (2a) and [Pd(tbucope)(CHPhCH2Ph)](OTf) (2b) was achieved. Magnetization transfer from the alpha-H of the CHPhCH2Ph ligands in these species proceeds into trans-stilbene. This process has a rate constant of 0.53 s-1 at 300 K in methanol-d4 for 2a, where DeltaH = 42 +/- 9 kJ mol-1 and DeltaS = -107 +/- 31 J mol-1 K-1, but in CD2Cl2 the corresponding rate constant is 0.18 s-1, with DeltaH = 79 +/- 7 kJ mol-1 and DeltaS = 5 +/- 24 J mol-1 K-1. The analogous process for 2b was too fast to monitor in methanol, but in CD2Cl2 the rate constant for trans-stilbene formation is 1.04 s-1 at 300 K, with DeltaH = 94 +/- 6 kJ mol-1 and DeltaS = 69 +/- 22 J mol-1 K-1. Magnetization transfer from one of the two inequivalent beta-H sites of the CHPhCH2Ph moiety proceeds into trans-stilbene, while the other site shows transfer into H2 or, to a lesser extent, cis-stilbene in CD2Cl2, but in methanol it proceeds into the vinyl cations [Pd(bcope)(CPh=CHPh)(MeOD)](OTf) (3a) and [Pd(tbucope)(CPh=CHPh)(MeOD)](OTf) (3b). When the same magnetization transfer processes are monitored for 1a in methanol-d4 containing 5 microL of pyridine, transfer into trans-stilbene is observed for two sites of the alkyl, but the third proton now becomes a hydride ligand in [Pd(bcope)(H)(pyridine)](OTf) (5a) or a vinyl proton in [Pd(bcope)(CPh=CHPh)(pyridine)](OTf) (4a). For 1b, under the same conditions, two isomers of [Pd(tbucope)(H)(pyridine)](OTf) (5b and 5b') and the neutral dihydride [Pd(tbucope)(H)2] (7) are detected. The single vinylic CH proton in 3 and the hydride ligands in 4 and 5 appear as strong emission signals in the corresponding 1H NMR spectra.     

New functional model complexes of intradiol-cleaving catechol dioxygenases: properties and reactivity of CuII(L)(O2Ncat)

Complexes Cu(O2Ncat)(tbeda) (1) and Cu(O2Ncat)(tmeda) (2) (tbeda = N,N,N',N'-tetrabenzylethylenediamine, tmeda=N,N,N',N'-tetramethylethylenenediamine, O2NcatH2=4-nitrocatechol) have been prepared by the reaction of copper(II) perchlorate with 4-nitrocatechol in the presence of triethylamine and the appropriate bidentate ligand. These compounds represent structural and functional model systems for the copper-containing catechol 1,2-dioxygenase. Both complexes have been structurally characterized by X-ray crystallography and by UV-vis, IR, and EPR spectroscopies. Upon protonation of 1 and 2 with perchloric acid, the bidentate coordination of O2Ncat could be reversible converted to the monodentate coordination of O2NcatH. The equilibrium constants were found to be 4200 and 3500, respectively, by measuring the UV-vis spectra in DMF. Back-titration with morpholine proved the reversibility of both reactions. Kinetic data on the oxygenation of 1 and 2 revealed overall second-order rate equations with kinetic parameters: ktbeda=(4.63+/-0.23)x10(-2) mol-1 dm3 s-1, DeltaH=51+/-6 kJ mol-1, DeltaS=-137+/-16 J mol-1 K-1; ktmeda=(0.89+/-0.23) mol-1 dm3 s-1, DeltaH=85+/-7 kJ mol-1, DeltaS=-57+/-19 J mol-1 K-1 at 365.16 K. Oxygenation of 1, 2, and [Cu(O2NcatH)(L)]ClO4 (L=tbeda, tmeda) in DMF solution at ambient conditions gives the corresponding intradiol ring-cleaved (2-nitro-muconato)copper(II) complexes. These data support the assumption that the reaction of the differently coordinated catecholate ligand with dioxygen shows only 1,2-dioxygenase activity.     

Selective anion encapsulation by a metalated cryptophane with a pi-acidic interior

Metalation of the exterior arene faces of the molecular capsule (+/-)-cryptophane-E with [Cp*Ru]+ moieties results in a pi-acidic cavity capable of encapsulating anions. The [CF3SO3]- and [SbF6]- salts have been crystallographically characterized and demonstrate the encapsulation of these anions by the metalated cryptophane. 1H and 19F NMR spectroscopy establish the binding of anions in NO2CD3 solution and reveal the relative affinity of the cavity for different anions (KX-/KOTf-): [BF4]- approximately 0, [PF6]- = 1.18, [CF3SO3]- identical with 1, [SbF6]- = 0.30. Variable temperature rate studies reveal the activation barrier for triflate encapsulation to be DeltaG298K = 18.0(8) kcal.mol-1 (DeltaH = 17.5(4) kcal.mol-1 and DeltaS = 2(1) cal.mol-1.K-1).     

Sequential and selective hydrogenation of the C(alpha)-C(beta) and M-C(alpha) double bonds of an allenylidene ligand coordinated to osmium: new reaction patterns between an allenylidene complex and alcohols

Complex [OsH(=C=C=CPh2)(CH3CN)2(PiPr3)2]BF4 (1) reacts with primary and secondary alcohols to give the corresponding dehydrogenated alcohols and the hydride-carbene derivative [OsH(=CHCH=CPh2)(CH3CN)2(PiPr3)2]BF4 (2), as a result of hydrogen transfer reactions from the alcohols to the Calpha-Cbeta double bond of the allenylidene ligand of 1. The reactions with phenol and t-butanol, which do not contain any beta-hydrogen, afford the alkoxy-hydride-carbyne complexes [OsH(OR)(CCH=CPh2)(CH3CN)(PiPr3)2]BF4 (R = Ph (3), tBu (4)), as a consequence of the 1,3-addition of the O-H bond of the alcohols to the metallic center and the Cbeta atom of the allenylidene of 1. On the basis of the reactions of 1 with these tertiary alcohols, deuterium labeling experiments, and DFT calculations, the mechanism of the hydrogenation is proposed. In acetonitrile under reflux, the Os-C double bond of 2 undergoes hydrogenation to give 1,1-diphenylpropene and [Os{CH2CH(CH3)PiPr2(CH3CN)3(PiPr3)]BF4 (11), containing a metalated phosphine ligand. This reaction is a first-order process with activation parameters of DeltaH = 89.0 +/- 6.3 kJ mol-1 and DeltaS = -43.5 +/- 9.6 J mol-1 K-1. The X-ray structures of 2 and 3 are also reported.     

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Iron substitution for sodium in a carboxylate-bridged, heterodinuclear sodium-iron complex

The synthesis and structural characterization of the carboxylate-bridged, heterodinuclear iron-sodium complex [NaFe(PIC2DET)(mu-O2CTrp)3] (2), where PIC2DET (1) is a 2,3-diethynyltriptycene-linked dipicolinic methyl ester ligand and Trp is 9-triptycenyl, are described. The metal ions in 2 are bridged by three triptycene carboxylates with an Fe...Na distance of 3.181(2) A, and each is coordinated to a pyridine nitrogen and carbonyl oxygen atom of 1, forming two five-membered chelate rings. A linkage isomer in which Fe1 is bound by the other ester oxygen atom of 1 was identified by X-ray crystallographic analysis. Treatment of 2 with Fe(OTf)2.2MeCN resulted in substitution of sodium by iron(II) to give the cationic diiron(II) complex [Fe2(PIC2DET)(mu-O2CTrp)3][OTf] (3). This reaction was investigated by UV-vis, IR, MS, and stopped-flow spectroscopy. The substitution is first order with respect to 2 and zero order with respect to Fe(OTf)2.2MeCN (kobs = 21 +/- 2 s-1), consistent with a dissociative mechanism. A positive enthalpy of activation (DeltaH = 59 +/- 6 kJ mol-1) and negative entropy of activation (DeltaS = -20 +/- 6 J mol-1 K-1) were calculated from the temperature dependence of the rate-determining dissociation step.     

Proton transfer to nickel-thiolate complexes. 1. Protonation of [Ni(SC(6)H(4)R-4)(2)(Ph(2)PCH(2)CH(2)PPh(2))] (R = Me, MeO, H, Cl, or NO(2))

The kinetics of the equilibrium reaction between [Ni(SC(6)H(4)R-4)(2)(dppe)] (R= MeO, Me, H, Cl, or NO(2); dppe = Ph(2)PCH(2)CH(2)PPh(2)) and mixtures of [lutH](+) and lut (lut = 2,6-dimethylpyridine) in MeCN to form [Ni(SHC(6)H(4)R-4)(SC(6)H(4)R-4)(dppe)](+) have been studied using stopped-flow spectrophotometry. The kinetics for the reactions with R = MeO, Me, H, or Cl are consistent with a single-step equilibrium reaction. Investigation of the temperature dependence of the reactions shows that DeltaG = 13.6 +/- 0.3 kcal mol(-)(1) for all the derivatives but the values of DeltaH and DeltaS vary with R (R = MeO, DeltaH() = 8.5 kcal mol(-)(1), DeltaS = -16 cal K(-)(1) mol(-)(1); R = Me, DeltaH() = 10.8 kcal mol(-)(1), DeltaS = -9.5 cal K(-)(1) mol(-)(1); R = Cl, DeltaH = 23.7 kcal mol(-)(1), DeltaS = +33 cal K(-)(1) mol(-)(1)). With [Ni(SC(6)H(4)NO(2)-4)(2)(dppe)] a more complicated rate law is observed consistent with a mechanism in which initial hydrogen-bonding of [lutH](+) to the complex precedes intramolecular proton transfer. It seems likely that all the derivatives operate by this mechanism, but only with R = NO(2) (the most electron-withdrawing substituent) does the intramolecular proton transfer step become sufficiently slow to result in the change in kinetics. Studies with [lutD](+) show that the rates of proton transfer to [Ni(SC(6)H(4)R-4)(2)(dppe)] (R = Me or Cl) are associated with negligible kinetic isotope effect. The possible reasons for this are discussed. The rates of proton transfer to [Ni(SC(6)H(4)R-4)(2)(dppe)] vary with the 4-R-substituent, and the Hammett plot is markedly nonlinear. This unusual behavior is attributable to the electronic influence of R which affects the electron density at the sulfur.     

Evidence for a SN2-type pathway for phosphine exchange in phosphine-phosphenium cations, [R2P--PR'3]+

Abstraction of a Cl(-) ion from the P-chlorophospholes, R4C4PCl (R=Me, Et), produced the P--P bonded cations [R4C4P--P(Cl)C4R4]+, which reacted with PPh3 to afford X-ray crystallographically characterised phosphine-phosphenium cations [R4C4P(PPh3)]+ (R=Me, Et). Examination of the 31P-{1H} NMR spectrum of a solution (CH2Cl(2)) of [Et4C4P-(PPh3)]+ and PPh3 revealed broadening of the resonances due to both free and coordinated PPh3, and importantly it proved possible to measure the rate of exchange between PPh3 and [Et4C4P-(PPh3)]+ by line shape analysis (gNMR programmes). The results established second-order kinetics with DeltaS( not equal)=(-106.3+/-6.7) J mol(-1) K(-1), DeltaH( not equal)=(14.9+/-1.6) kJ mol(-1) and DeltaG( not equal) (298.15 K)=(46.6+/-2.6) kJ mol(-1), values consistent with a SN2-type pathway for the exchange process. This result contrasts with the dominant dissociative (S(N)1-type) pathway reported for the analogous exchange reactions of the [ArNCH2CH2N(Ar)P(PMe3)]+ ion, and to understand in more detail the factors controlling these two different reaction pathways, we have analysed the potential energy surfaces using density functional theory (DFT). The calculations reveal that, whilst phosphine exchange in [Et4C4P(PPh3)]+ and [ArNCH2CH2N(Ar)P(PMe3)](+) is superficially similar, the two cations differ significantly in both their electronic and steric requirements. The high electrophilicity of the phosphorus center in [Et4C4P]+, combined with strong pi-pi interactions between the ring and the incoming and outgoing phenyl groups of PPh3, favours the SN2-type over the SN1-type pathway in [Et4C4P(PPh3)]+. Effective pi-donation from the amide groups reduces the intrinsic electrophilicity of [ArNCH2CH2N(Ar)P]+, which, when combined with the steric bulk of the aryl groups, shifts the mechanism in favour of a dissociative SN1-type pathway.     

Pre-catalyst resting states: a kinetic, thermodynamic and quantum mechanical analyses of [PdCl2(2-oxazoline)2] complexes

The treatment of cold ( approximately 3 degrees C) methanolic solutions of Li(2)PdCl(4) with two equivalents of 2-phenyl-2-oxazoline (Phox) results in the isolation of [PdCl(2)(Phox)(2)] (3). This complex undergoes remarkably slow isomerisation (CHCl(3)-d) at room temperature to a corresponding thermodynamic form. In addition to a theoretical treatment (DFT), the isomerisation behaviour has been analysed both kinetically and thermodynamically. These investigations lead to the conclusion that the initially formed (i.e. kinetic) isomer of 3 is the cis-form which undergoes conversion to the corresponding thermodynamic trans-form via a dissociative (D) mechanism involving loss of a Phox ligand. The activation parameters DeltaS(double dagger) and DeltaH(double dagger) are found to be +304 (+/-3) J K(-1) mol(-1) and +176 (+/-1) kJ mol(-1), respectively and indicate a high barrier to Pd-N bond cleavage under these conditions. The thermodynamic parameters show the expected endothermic nature of this process (+140 +/- 17 kJ mol(-1)) and a slight positive overall entropy (DeltaS degrees = +17 +/- 2 J K(-1) mol(-1)); this latter parameter is presumably due to the formation of the lower dipole moment trans-product when compared to the cis-isomer. Calculated (DFT) values of DeltaG(double dagger) and DeltaH(double dagger) are in excellent agreement to those found experimentally. Further theoretical investigation suggests that two 14-electron three-coordinate T-shaped transition states (i.e., [PdCl(2)(Phox)](double dagger)) are involved; the form pre-disposed to yield the thermodynamic trans-product following re-attachment of the released oxazoline is found to be energetically favoured. The analogous alkyloxazoline system [PdCl(2)(Meox)(2)] (4: Meox = 2-methyl-2-oxazoline) has likewise been investigated. This material gives no indication of cis-trans isomerisation behaviour in solution (NMR) and is shown to exist (X-ray) in the trans-form in the solid-state (as do previously reported crystalline samples of 3). A DFT study of 4 reveals similar values of DeltaS(double dagger) and DeltaH(double dagger) if a D type mechanism were operating to rapidly convert cis- to trans-4. However, a significantly higher thermodynamic stability of the trans-isomer relative to the cis-form is revealed versus similar calculations of the Phox derivative 3. This suggests the possibility that (i) reactions of Meox with Li(2)PdCl(4) may lead directly to the trans-form of [PdCl(2)(Meox)(2)] or alternatively (ii) that alkyloxazoline complexes such as 4 may have a different, and presumably much more rapid, mechanism for isomerisation. The results are placed into the context that isomerisation behaviour, or lack thereof, could play a key preliminary role in later substrate modification. This is due to the fact that [PdX(2)(oxazoline)(2)] compounds are well-known (pre-)catalysts for C-C bond forming chemistry.     

Proton exchange kinetics from the bound waters on the oxo-centered rhodium(III) trimer [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+: a variable pH and temperature 1H NMR study

Proton exchange from the bound to the bulk waters on the oxo-centered rhodium(III) trimer, [Rh(3)(micro(3)-O)(micro-O(2)CCH(3))(6)(OH(2))(3)](+)(abbreviated as Rh(3)(+)), was investigated over the temperature range of 219.1-313.9 K using a (1)H NMR line-broadening technique. By solving the modified Bloch equations for a two-site chemical exchange, lifetimes (tau) for proton transfer at pH = 2.7, 3.6, and 7.0 ([Rh(3)(+)]= 26 mM, T= 298 K) were determined to be 0.3 (+/-.08) ms, 2 (+/-0.3) ms, and 0.2 (+/-0.2) ms, respectively. From the temperature dependence of the rate, the activation parameters were determined to be DeltaH(++)= 16.2 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 123 (+/-2) J mol(-1) K(-1), DeltaH(++)= 14.9 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 141 (+/-2) J mol(-1) K(-1), and DeltaH(++)= 45 (+/-2) kJ mol(-1) and DeltaS(++)=- 22 (+/-5) J mol(-1) K(-1) for pH = 2.7, 3.6 and 7.0, respectively. All results are reported for a mixed solvent system [acetone : 250 mM NaClO(4)(aq)(3:1)], which was necessary to depress the freezing point of the solution so that the (1)H NMR signal due to bound water could be observed. The pK(a) of Rh(3)(+) was measured to be 8.9 (+/-0.2) in the mixed solvent, which is near the pK(a) for an aqueous solution (8.3 (+/-0.2)). Surprisingly, the lifetimes for protons on Rh(3)(+) are close to those observed for the Rh(OH(2))(6)(3+) ion, in spite of the considerable difference in structure, Br?nsted acidity of the bound waters and average charge on the metal ion.     

Study of neutral Fe(III) complexes of pyridoxal-N-substituted thiosemicarbazone with desolvation-induced spin-state transformation above room temperature

The preparation and characterization of two new neutral ferric complexes with desolvation-induced discontinuous spin-state transformation above room temperature are reported. The compounds, [Fe(Hthpy)(thpy)].CH3OH.3H2O (1) and [Fe(Hmthpy)(mthpy)].2H2O (2), are low-spin (LS) at room temperature and below, whereas their nonsolvated forms are high-spin (HS), exhibiting zero-field splitting. In these complexes, Hthpy, Hmthpy, and thpy, mthpy are the deprotonated forms of pyridoxal thiosemicarbazone and pyridoxal methylthiosemicarbazone, respectively; each is an O,N,S-tridentate ligand. The molecular structures have been determined at 100(1) K using single-crystal X-ray diffraction techniques and resulted in a triclinic system (space group P1) and monoclinic unit cell (space group P21/c) for 1 and 2, respectively. Structures were refined to the final error indices, where RF = 0.0560 for 1 and RF = 0.0522 for 2. The chemical inequivalence of the ligands was clearly established, for the "extra" hydrogen atom on the monodeprotonated ligands (Hthpy, Hmthpy) was found to be bound to the nitrogen of the pyridine ring. The ligands are all of the thiol form; the doubly deprotonated chelates (thpy, mthpy) have C-S bond lengths slightly longer than those of the singly deprotonated forms. There is a three-dimensional network of hydrogen bonds in both compounds. The discontinuous spin-state transformation is accompanied with liberation of solvate molecules. This is evidenced also from DSC analysis. Heat capacity data for the LS and HS phases are tabulated at selected temperatures, the values of the enthalpy and entropy changes connected with the change of spin state were reckoned at DeltaH = 12.5 +/- 0.3 kJ mol-1 and DeltaS = 33.3 +/- 0.8 J mol-1 K-1, respectively, for 1 and DeltaH = 6.5 +/- 0.3 kJ mol-1 and DeltaS = 17.6 +/- 0.8 J mol-1 K-1, respectively, for 2.     

Structure of iron(III) ion and its complexation with thiocyanate ion in N,N-dimethylformamide

Complexation of iron(III) with thiocyanate ions has been calorimetrically and spectrophotometrically investigated in N,N-dimethylformamide (DMF) containing 0.4 mol/dm(3) (C(2)H(5))(4)NClO(4) or 1 mol/dm(3) NH(4)ClO(4) as a constant ionic medium at 25 degrees C. Calorimetric titration data were well explained in terms of the formation of [Fe(SCN)(n)]((3-n)+) (n = 1-5), and their formation constants, reaction enthalpies and entropies were determined. Electronic spectra of individual iron(III) thiocyanato complexes were also determined. The stepwise thermodynamic quantities changed monotonously, i.e. DeltaG degrees (1) < DeltaG degrees (2) < DeltaG degrees (3) < DeltaG degrees (4), < DeltaG degrees (5), DeltaH degrees (1) > DeltaH degrees (2) > DeltaH degrees (3) > DeltaH degrees (4) > DeltaH degrees (5), DeltaS degrees (1) > DeltaS degrees (2) > DeltaS degrees (3) > DeltaS degrees (4) > DeltaS degrees (5). This suggests that no extensive desolvation occurred at any step of complexation. On the basis of these thermodynamic quantities, it is postulated that the [Fe(SCN)(n)]((3-n)+) (n = 1-5) complexes have a six-coordinate octahedral structure as well as the [Fe(dmf)(6)](3+) ion, the octahedral structure of which has been confirmed by the EXAFS (extended X-ray absorption fine structure) method.     

Mechanism of the interconversions between C- and N-bound transition metal alpha-cyanocarbanions

The first presentation of the intra- and intermolecular mechanisms of the C-N interconversions of transition metal alpha-cyanocarbanions is described. A pair of N- and C-bound isomers of isonitrile complex Ru+Cp(NCCH-SO2Ph)(PPh3)(CN-t-Bu) (1) and RuCp[CH(CN)SO2Ph](PPh3)(CN-t-Bu) (2) was synthesized for the mechanistic studies on the N-to-C isomerizations. Structural characterization by X-ray diffractions of 1 and 2 indicated their typical zwitterionic and alpha-metalated structures. The kinetic studies on the irreversible isomerization of 1 to 2 in benzene-d6 at 333-348 K were carried out using 1H NMR spectroscopy, affording the first-order rate constants k1 and the activation parameters DeltaH = 107 +/- 2 kJ.mol-1 and DeltaS = -22 +/- 5 J.K-1.mol-1. The almost identical values of k1 were obtained upon similar treatment of 1 with 4 equiv of external ligands such as PPh3, CH3CN, and t-BuNC at 333 K, indicating that the N-to-C isomerization proceeds in an intramolecular manner without dissociation of a ligand. As a model system for the C-to-N isomerization, the irreversible transformation of RuCp[CH(CN)SO2Ph](PPh3)2 (3) to Ru+Cp(NCCH-SO2Ph)(PPh3)2 (4) was investigated under various reaction conditions. The reaction of 3 at room temperature in THF affords the coordination dimers (RRu*,SC*,RRu*,SC*)-{RuCp[CH(CN)SO2Ph](PPh3)}2 (5) stereoselectively, and its distorted mu2-C,N-bound structure was determined by X-ray analysis. The reaction profiles for the isomerization of 3 includes the generation- and temperature-dependent decays of dimeric species 5 and its diastereomer 6, which strongly suggests that the intra- and intermolecular pathways are included in the C-to-N isomerization. The intramolecular process of the C-to-N isomerization of 3 has been confirmed by the kinetic studies on the isomerization of 3 with excess amount of PPh3 in benzene-d6 at 333-348 K which afford the first-order kinetics with the activation parameters of DeltaH = 121 +/- 1 kJ.mol-1 and DeltaS = 42 +/- 4 J.K-1.mol-1. Treatment of 5 with PPh3 in boiling benzene gives rise to the quantitative formation of N-bound complex 4. The controlled kinetic experiments on the cleavage of 5 with PPh3 have concluded that the cleavage of 5 with PPh3 proceeds via simultaneous C-Ru and N-Ru bond scissions, indicating the temperature-dependent participation of intermolecular process in the C-to-N isomerization of 3.     

Kinetics and thermodynamics of the reaction of deoxyhemerythrin with nitric oxide

Deoxyhemerythrin reacts with NO to form a 1:1 adduct shown spectrophotometrically. The kinetics of the formation have been studied directly by stopped-flow measurements at four different temperatures (0.0-23.6 degrees C). The kinetics of the dissociation have been studied, also by stopped-flow techniques, at five different temperatures (4.0-35.1 degrees C) using three different scavengers [Fe(II)(edta)2-, O2 and sperm whale deoxymyoglobin], which gave similar values. For the formation kf = (4.2 +/- 0.2) x 10(6) M-1 s-1, delta Hf not equal = 44.3 +/- 2.3 kJ mol-1, delta Sf not equal to = 30 +/- 8 J mol-1 K-1 and for the dissociation kd = 0.84 +/- 0.02 s-1, delta Hd not equal to 95.6 +/- 2.1 kJ mol-1 delta Sd not equal to = 74 +/- 7 J mol-1 K-1 (25 degrees C, I = 0.2 M and pH 7-8.1). From the kinetic data the thermodynamic data for the formation of HrNO were calculated: Kf = (5.0 +/- 0.3) x 10(6) M-1, delta H = -51.3 +/- 3.1 kJ mol-1 and delta S = -44 +/- 11 J mol-1 K-1 (25 degrees C). The kinetic data suggest that NO occupies the same iron(II) site in deoxyhemerythrin as oxygen does. The equilibrium constant for the formation of Fe(II)(edta)(NO)2- has been redetermined: K1 = (1.45 +/- 0.07) x 10(7) M-1, delta H = -77.5 +/- 1.5 kJ and mol-1 and delta S = -123.5 J mol-1 K-1 (25 degrees C).     

Solvent effects on the oxidation of RuIV=O to O=RuVI=O by MnO4-. hydrogen-atom versus oxygen-atom transfer

The kinetics of the oxidation of trans-[RuIV(tmc)(O)(solv)]2+ to trans-[RuVI(tmc)(O)2]2+ (tmc is 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane, a tetradentate macrocyclic tertiary amine ligand; solv = H2O or CH3CN) by MnO4- have been studied in aqueous solutions and in acetonitrile. In aqueous solutions the rate law is -d[MnO4]/dt = kH2O[RuIV][MnO4-] = (kx + (ky)/(Ka)[H+])[RuIV][MnO4-], kx = (1.49 +/- 0.09) x 101 M-1 s-1 and ky = (5.72 +/- 0.29) x 104 M-1 s-1 at 298.0 K and I = 0.1 M. The terms kx and ky are proposed to be the rate constants for the oxidation of RuIV by MnO4- and HMnO4, respectively, and Ka is the acid dissociation constant of HMnO4. At [H+] = I = 0.1 M, DeltaH and DeltaS are (9.6 +/- 0.6) kcal mol-1 and -(18 +/- 2) cal mol-1 K-1, respectively. The reaction is much slower in D2O, and the deuterium isotope effects are kx/kxD = 3.5 +/- 0.1 and ky/kyD = 5.0 +/- 0.3. The reaction is also noticeably slower in H218O, and the oxygen isotope effect is kH216O/kH218O = 1.30 +/- 0.07. 18O-labeled studies indicate that the oxygen atom gained by RuIV comes from water and not from KMnO4. These results are consistent with a mechanism that involves initial rate-limiting hydrogen-atom abstraction by MnO4- from coordinated water on RuIV. In acetonitrile the rate law is -d[MnO4-]/dt = kCH3CN[RuIV][MnO4-], kCH3CN = 1.95 +/- 0.08 M-1 s-1 at 298.0 K and I = 0.1 M. DeltaH and DeltaS are (12.0 +/- 0.3) kcal mol-1 and -(17 +/- 1) cal mol-1 K-1, respectively. 18O-labeled studies show that in this case the oxygen atom gained by RuIV comes from MnO4-, consistent with an oxygen-atom transfer mechanism.     

Some Thermodynamic Data on Copper-Chitin and Copper-Chitosan Biopolymer Interactions

Chitin and chitosan are good removers of cations from aqueous solution and wastewater. The interactive effect of cation with both biopolymers in aqueous medium was studied by the batch method at 298 +/- 1 K. The results were fitted to the modified Langmuir equation. The same adsorption was followed by calorimetric titration. In this process, 50.0 mg of each polymer was suspended in 19.0 cm3 of bidistilled water at 298.15 +/- 0.02 K, maintained under mechanical turbine stirring. The titration was performed by adding increments of 10 μL of 0.10 mol dm-3 Cu(NO3)2 aqueous solution to the system. The resulting isotherm was also adjusted to a modified Langmuir equation. From the thermal effects K and DeltaH values were determined, enabling the calculation of DeltaG and DeltaS for the interaction of copper cations with chitin and chitosan, giving the enthalpic values of -19.85 +/- 0.34 and -41.27 +/- 1.57 kJ mol-1, respectively. The spontaneity of this interaction is shown from DeltaG values of -35.9 +/- 0.1 and -36.8 +/- 0.1 kJ mol-1, which are followed by DeltaS values of +54 and of -15 J mol-1 K-1, respectively. The complexation is probably associated with the lack of order of the chitin polymeric chain or with the freedom of water molecules initially bonded to cations. The copper ion is coordinated to the pendant groups of the polymeric chain to form stable complexes. Copyright 1999 Academic Press.