ESPT of 2-(2'-pyridyl)benzimidazole at the Micelle-Water interface: selective enhancement and slow dynamics with sodium dodecyl sulfate

The effect of micellar environment on the excited state proton transfer (ESPT) of 2-(2'-pyridyl)benzimidazole (2PBI) has been investigated by steady state and time resolved fluorescence spectroscopy. The ESPT, which occurs to a rather small extent at pH 7, is found to be enhanced remarkably at the interface of sodium dodecyl sulfate (SDS) micelles and water. Such an enhancement is not observed for the cationic cetyl trimethyl ammonium bromide (CTAB) or neutral Triton X-100 micelles. This selective enhancement is explained in the light of a modification of pK(a) and a more acidic local pH in the micelle-water interface. A rise time of about 890 ps is observed in the region of tautomer emission. The origin of this rise time is explored, considering three factors, namely, diffusion controlled protonation of the normal form of 2PBI, slow and possibly incomplete solvation of the transition state, leading to a slowing down of the proton transfer process and a similar slow dynamics of the tautomeric excited state.     

Regulation of the extent and dynamics of excited-state proton transfer in 2-(2'-pyridyl)benzimidazole in nafion membranes by cation exchange

The effect of the microenvironment of a Nafion membrane on the excited-state proton transfer (ESPT) of 2-(2'-pyridyl)benzimidazole (2PBI) has been investigated by steady-state and time-resolved fluorescence spectroscopy. The mechanism of the ESPT is found to depend remarkably on the water content of the membrane. In the protonated form of the membrane, ESPT is found to involve the dicationic (D) form of the fluorophore, whereas in cation-exchanged membranes, it is found to involve the monocation (C). The change in the mechanism and extent of ESPT in cation-exchanged membranes can be explained by considering dehydration of the membrane as well as the less acidic environment around the 2PBI molecules. The slow dynamics is found to result from two factors, namely, slow and incomplete solvation of the transition state, leading to a slowing down of the proton-transfer process, and a slow solvation of the polar tautomeric excited state.     

Intramolecular charge transfer reaction, polarity, and dielectric relaxation in AOT/water/heptane reverse micelles: pool size dependence

Intramolecular charge transfer (ICT) reaction in a newly synthesized molecule, of 4-(1-morpholenyl) benzonitrile (M6C), in AOT/water/heptane reverse micelles at different pool sizes has been studied by using steady-state and time-resolved fluorescence emission spectroscopy. The pool size dependences of the reaction equilibrium constant and reaction rate have been explained in terms of the average polarity of the confined solvent pools estimated from the fluorescence emission Stokes shift of a nonreactive probe, coumarin 153, dissolved in these microemulsions. The complex permittivity measurements in the frequency range 0.01相似文献   

琥珀酸二异辛酯磺酸钠微乳体系中纳米银的制备及其连续相的影响

在琥珀酸二异辛酯磺酸钠(AOT)为表面活性剂、环己烷为连续相形成的微乳体系中, 利用水合肼还原AgNO₃制备了分散性良好的纳米银. 利用紫外-可见(UV-Vis)光谱和透射电镜(TEM)对所得产物进行了表征, TEM显微图像表明形成粒子为球形结构, 平均粒径为5.10 nm, 标准偏差为2.84 nm. 分别利用正己烷、正庚烷、正辛烷、环己烷和十二烷等作连续介质, 研究了微乳液中连续相对纳米银形成的影响. 随着正烷烃碳链长度的增加, 微乳液中胶束之间的交换速率增大, 形成粒子的平均粒径逐渐减小. 十二烷形成的微乳体系制备的纳米银溶胶具有最宽的共振吸收峰, 所得的纳米银粒子平均粒径最小. 环己烷形成的微乳液中反胶束具有特殊的界面强度, 导致纳米银晶核的形成速率过低, 纳米银晶粒的生长不完全.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

Coexisting aggregates in mixed aerosol OT and cholesterol microemulsions

Dynamic light scattering and NMR spectroscopic experimental evidence suggest the coexistence of two compositionally different self-assembled particles in solution. The self-assembled particles form in solutions containing water, Aerosol OT (AOT, sodium bis(2-ethylhexyl) sulfosuccinate) surfactant, and cholesterol in cyclohexane. In a similar series of studies carried out in 1-octanol only one aggregate type, that is, reverse micelles, is observed. Dynamic light scattering measurements reveal the presence of two different types of aggregates in the microemulsions formed in cyclohexane, demonstrating the coexistence of two compositionally distinct structures with very similar Gibbs energies. One particle type consists of standard AOT reverse micelles while the second type of particle consists of submicellar aggregates including cholesterol as well as small amounts of AOT and water. In microemulsions employing 1-octanol as the continuous medium, AOT reverse micelles form in a dispersed solution of cholesterol in 1-octanol. Although the size distribution of self-assembled particles is well-known for many different systems, evidence for simultaneous formation of two distinctly sized particles in solution that are chemically different is unprecedented. The ability to form microemulsion solutions that contain coexisting particles may have important applications in drug formulation and administration, particularly as applied to drug delivery using cholesterol as a targeting agent.     

Spectroluminescent properties of cadmium selenide nanoparticles synthesized in AOT reverse micelles

Cadmium selenide nanoparticles have been synthesized in solutions of AOT/water/n-heptane reverse micelles with average micelle water pool diameters of 25, 30, and 47 Å using cadmium sulfate (CdSO₄) and sodium selenosulfate (Na₂SeSO₃) as precursors. Absorption and fluorescence spectra of the obtained nanoparticles were recorded. The picosecond dynamics of fluorescence decay over the entire range of their emission band have been investigated by time-resolved fluorescence spectroscopy. A procedure for the stabilization of nanoparticles by dodecanethiol was developed for electron microscopy analysis.     

Influence of negatively charged interfaces on the ground and excited state properties of methylene blue

Properties of the ground and excited states of methylene blue (MB) were studied in negatively charged vesicles, normal and reverse micelles and sodium chloride solutions. All these systems induce dimer formation as attested by the appearance of the dimer band in the absorption spectra (lamdaD approximately 600 nm). In reverse micelles the dimerization constant (KD) corrected for the aqueous pseudophase volume fraction is two-three orders of magnitude smaller than KD of MB in water, and it does not change when W0 is increased from 0.5 to 10. Differences in the fluorescence intensity as a function of dimer-monomer ratio as well as in the resonance light scattering spectra indicate that distinct types of dimers are induced in sodium dodecyl sulfate (SDS) micelles and aerosol-OT (sodium dioctyl sulfoxinate, AOT) reversed micelles. The properties of the photoinduced transient species of MB in these systems were studied by time-resolved near infrared (NIR) emission (efficiency of singlet oxygen generation), by laser flash photolysis (transient spectra, yield and decay rate of triplets) and by thermal lensing (amount of heat deposited in the medium). The competition between electron transfer (dye*-dye) and energy transfer (dye*-O2) reactions was accessed as a function of the dimer-monomer ratio. The lower yield of electron transfer observed for dimers in AOT reverse micelles and intact vesicles compared with SDS micelles and frozen vesicles at similar dimer-monomer ratios is related with the different types of aggregates induced by each interface.     

An example of how to use AOT reverse micelle interfaces to control a photoinduced intramolecular charge-transfer process

6-Propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe due to its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer (ICT) states which can be particularly useful as sensors. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES), and time-resolved area normalized emission (TRANES) spectroscopies on PRODAN dissolved in nonaqueous reverse micelles. The reverse micelles are composed of polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane. Sequestered polar solvents included ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA). The experiments were performed with varying surfactant concentrations at a fixed molar ratio W(S) = [polar solvent]/[AOT]. In every reverse micelle studied, the results show that PRODAN undergoes a partition process between the external solvent and the reverse micelle interface. The partition constants, K(p), are quantified from the changes in the PRODAN emission and/or absorption spectra with the surfactant concentration. The K(p) values depend strongly on the encapsulated polar solvent and correlate quite well with the AOT reverse micelle interface's zones where PRODAN can exist and emits. Thus, the partition toward the reverse micelle interface is strongly favored in DMF and DMA containing micelles where the PRODAN emission comes only from an ICT state. For GY/AOT reverse micelles, the K(p) value is the lowest and only emission from the local excited (LE) state is observed. On the other hand, for EG/AOT, PG/AOT, and water/AOT reverse micelles, the K(p) values are practically the same and emission from both states (LE and ICT) is simultaneously detected. We show here that it is possible to control the PRODAN state emission by simply changing the properties of the AOT reverse micelle interfaces by choosing the appropriate polar solvent to make the reverse micelle media. Indeed, we present experimental evidence with the answer to the long time question about from which state does PRODAN emit, a process that can be controlled using the unique reverse micelle interfaces properties.     

SOMATOSTATIN IN A WATER-RESTRICTED ENVIRONMENT: FLUORESCENCE AND CIRCULAR DICHROISM STUDY IN AOT REVERSE MICELLES

Abstract— Steady-state and time-resolved fluorescence emission from the single tryptophan residue of somatostatin, and the kinetics of quenching of this emission, were studied in aqueous solution and in reverse micelles of sodium bis (2-ethylhexyl) sulfosuccinate (AOT)/water/isooctane, a system that mimics the water-membrane interface well- Incorporation into micelles caused blue shifts and reduced band-widths of the emission peaks and altered the quantum yields with respect to emission from bulk water. Steady-state anisotropy values also increased considerably on micellization. These observations point to reduced polarity of the environment around the Tip residue of the peptide, as well as restricted freedom of its rotational motions, due to transfer from the aqueous to the micellar phase. Fluorescence emission kinetics of the Tip moiety followed biexponential decay laws in both aqueous and micellar media. Static and dynamic quenching constants were measured for acrylamide and CC1₄ quenchers localized in the micellar and organic pseudophases, respectively, using both steady-state and time-resolved experiments. The efficiency of dynamic quenching by acrylamide became vanishingly small in going from water to reverse micelles, in sharp contrast to the comparable quenching efficiencies exhibited by CC1₄ in micelles and acrylamide in water. The circular dichroic (CD) spectrum of the native peptide in water indicated the possibility of some amount of P-type secondary structure being present. Conformational analysis of CD spectra in micelles showed that the relative amount of this structural feature was enhanced for the micellized peptide but was insensitive to the water content of micelles. The above results, put together, indicate that the Trp-8 residue in somatostatin is likely to be located in the close neighborhood of the water-AOT molecular interface, where the water molecules are strongly immobilized. This work also demonstrates the role of reverse micelles as a convenient membrane-mimetic medium for the study of membrane interactions of bioactive peptides.     

Dynamics of solvent and rotational relaxation of glycerol in the nanocavity of reverse micelles

The dynamics of solvent and rotational relaxation of Coumarin 480 and Coumarin 490 in glycerol containing bis-2-ethyl hexyl sulfosuccinate sodium salt (AOT) reverse micelles have been investigated with steady-state and time-resolved fluorescence spectroscopy. We observed slower solvent relaxation of glycerol confined in the nanocavity of AOT reverse micelles compared to that in pure glycerol. However, the slowing down in the solvation time on going from neat glycerol to glycerol confined reverse micelles is not comparable to that on going from pure water or acetonitrile to water or acetonitrile confined AOT reverse micellar aggregates. While solvent relaxation times were found to decrease with increasing glycerol content in the reverse micellar pool, rotational relaxation times were found to increase with increase in glycerol content.     

Electrochemical Behavior of Anthraquinone in Reverse Micelles and Microemulsions of Cetyltrimethylammonium Bromide

The electrochemical behavior of an anthraquinone (AQ) was studied in aqueous solutions at a glassy carbon electrode, using the sodium salt of anthraquinone-2-sulfonic acid (AQS), by employing cyclic voltammetry. AQ undergoes a two-electron reduction in aqueous media. The electrochemical behavior of AQ was also investigated in micelles, reverse micelles (CTAB/1-butanol/water), and microemulsions (CTAB/1-butanol/water/cyclohexane) of cetyltrimethylammonium bromide (CTAB). The electrode reactions of AQ in reverse micelles and microemulsions are nearly reversible at low oil (cyclohexane) content. However, at higher oil content, the reversibility is gradually lost. In the case of reverse micelles, the reduction current, as well as the reduction potential, of AQ depend on the transition from a micellar solution to a stable solution of reverse micelles that occurs with added 1-butanol. In microemulsions, the change in cyclohexane content was found to cause a linear increase in the peak current for AQ reduction as well as a linear decrease in the corresponding reduction potential. As the cyclohexane content is increased, the o/w microemulsions dominated by micelles undergo a transition to a w/o microemulsion dominated by reverse micelles, which causes changes in the electrochemical behavior.     

Influence of Confined Water on the Photophysics of Dissolved Solutes in Reverse Micelles

The photophysical parameters of two probes with largely different hydrophobic character, namely, coumarin 1 and coumarin 343, are investigated in sodium bis‐(2‐ethylhexyl)sulfosuccinate (AOT)/hexane/water reverse micelles at various water/AOT molar ratio w₀. Correlation of photophysical parameters such as fluorescence quantum yield, fluorescence lifetime, and emission maxima with w₀ indicate distinctly different trends below and above w₀≈7 for both probes. The variation of the average rotational correlation times obtained from fluorescence anisotropy decays for both probes in reverse micelles further corroborate the above observation. Similar studies were also performed in nonaqueous reverse micelles with acetonitrile as polar solvent. Similar to aqueous reverse micelles, breaks in the photophysical parameters with increasing acetonitrile/AOT molar ratios w′₀ were also observed in these cases, although at a much lower w′₀ value of 3. The present results indicate that around w₀≈7 for aqueous reverse micelles (and around w′₀≈3 for nonaqueous reverse micelles) a distinct change occurs in the probe microenvironment, which is rationalized on the basis of the relative populations of interfacial and core water. We propose that until the ionic head groups and counterions are fully solvated by polar solvents, that is, up to w₀≈7 (or w′₀≈3), the interfacial water population dominates. Above these molar ratios coalescence of excess water molecules with each other to form truncated H‐bonded water clusters leads to a sizable population of core water. This is further substantiated by changes in the IR absorption spectra for the O? D stretching mode of diluted D₂O in reverse micelles with varying w₀. Critical comparison of the present results with relevant literature reports provide clear support for the proposals made on water structure in reverse micelles. The role of relative size of the probe and the reverse micelles for differences in polar solvent to AOT ratios (w₀=7 and w′₀=3) in the observed breaks in the two types of reverse micelles is also discussed.     

Excited-state proton transfer behavior of 7-hydroxy-4-methylcoumarin in AOT reverse micelles

The excited-state proton transfer and phototautomerization of 7-hydroxy-4-methylcoumarin (7H4MC) dye has been studied in the confined water pools of AOT reverse micelles using steady-state and time-resolved fluorescence measurements. In the "dry" reverse micelles ([water]/[AOT], w(0) = 0), only the neutral form of the dye is present both in the ground and the excited states. At higher w(0) values, three prototropic forms, namely, neutral, anionic, and tautomeric, can be identified in the excited state, although only the neutral form of the dye is present in the ground state. From steady-state fluorescence results and time-resolved area-normalized emission spectra (TRANES), it is indicated that the anionic and tautomeric forms of the dye are the excited-state reaction products and that they arise apparently independently from the excited neutral form of the dye. In bulk water, however, there is no evidence of the tautomeric species and only the anionic form is observed in the excited state. The fluorescence quenching results of the three forms of 7H4MC by the different quenchers, potassium iodide, aniline, and N, N-dimethylaniline, suggest that the distribution of 7H4MC molecules in the reverse micelles is not diverse but that the different prototropic forms arise from the same population of the excited dye in the interfacial region.     

Surfactant-induced aggregation patterns of thiazole orange: a photophysical study

The aggregation behavior of the DNA marker dye thiazole orange (TO), has been investigated in two types of surfactant assemblies, namely, premicelles/micelles of sodium dodecyl sulfate (SDS) and pre reverse micelles/reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate (AOT). In the case of an SDS/water system, absorption spectral changes of TO signify the formation of H-aggregates and H-dimers of the dye at premicellar concentrations, which subsequently convert to the monomeric form beyond the critical micellar concentration (cmc). Interestingly, the observed changes in the absorption and emission characteristics due to the surfactant-induced formation of H-aggregates/dimers of TO are found to be useful to estimate the surfactant concentration parameters for premicellar aggregation of SDS. In the case of an AOT/n-heptane system, similarly, H-aggregates/dimers are observed at low AOT concentrations, below the cmc. However, in this case, the H-dimers persist even beyond the cmc. This is attributed to the strong tendency of TO for self-aggregation and its favorable electrostatic interactions with the AOT head groups. With increasing water content in the AOT reverse micelles, the hydration of the dye leads to the conversion of H-dimers to the monomeric form. The steady-state fluorescence results are nicely corroborated with those from time-resolved fluorescence studies and demonstrate the interesting behavior of the surfactant-induced aggregation of TO dye.     

Effect of the addition of a nonaqueous polar solvent (glycerol) on enzymatic catalysis in reverse micelles. Hydrolysis of 2-naphthyl acetate by alpha-chymotrypsin

The kinetics of hydrolysis of 2-naphthyl acetate (2-NA) catalyzed by alpha-chymotrypsin (alpha-CT), in reverse micellar solutions formed by glycerol (GY)-water (38% v/v) mixture/sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/n-heptane has been determined by spectroscopic measurements. To compare the efficiency of this reaction with that observed in micelles with water in the core, as well as in the corresponding homogeneous media, the reaction was also studied in water/AOT/n-heptane reverse micellar solutions and in both homogeneous media (water and GY-water, 38% v/v mixture). In every media, alpha-CT was characterized by the absorption and emission spectra, the fluorescence lifetimes, and the fluorescence anisotropy of its tryptophan residues. The effect of AOT concentration on the kinetic parameters obtained in the micellar systems was determined, at a constant molar ratio of the inner polar solvent and surfactant. Moreover, the data obtained allowed the evaluation of the 2-NA partition constant between the organic and the micellar pseudophase. It is shown that the addition of GY to the micelle interior results in an increase in the catalytic properties of alpha-CT. The fluorescence anisotropy studies in the different media show that the addition of GY increases the viscosity as compared with the aqueous systems. It seems that the GY addition to the reverse micellar aggregates results in a decrease of the conformational mobility of alpha-CT, which leads to an increase of the enzyme stability and activity.     

The use of acridine orange base (AOB) as molecular probe to characterize nonaqueous AOT reverse micelles

The behavior of acridine orange base (AOB) in nonaqueous reverse micelles composed of n-heptane/AOT/polar solvent has been performed. Ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA) were employed as water substitutes. The studies were performed by static and time-resolved emission spectroscopy. Thus, the distribution of AOB between the two pseudophases of the aggregates was quantified by measuring the partition constants from emission spectra at different surfactant concentration. Similar values to those obtained by means of absorption spectroscopy were obtained. This match is indicating that AOB is not experiencing partition during the lifetime of the excited state. Partitioning to the micelles is strongly favored in micelles containing hydrogen-bond donor (HBD) solvents rather than non-HBD solvents. Variations of fluorescence lifetimes with AOT concentration confirm these results. By the solvatochromic behavior of AOB in the different systems it is shown that the microenvironment at the interface is distinct from that of the bulk polar solvent, indicating that the probe senses no "free" solvent. The steady state anisotropy (r) was measured for EG/AOT/n-heptane and DMF/AOT/n-heptane systems as representatives for HBD and non-HBD polar solvents, respectively. The value of r is higher in the micelles containing EG than that obtained with DMF, and increases with AOT concentration. This is explained as due to highly structured polar solvents in the inner core. EG is interacting with the polar heads of AOT through hydrogen-bond interaction, while DMF can only interact with the Na+ counterions. This is confirmed by the time-resolved emission spectra (TRES) of the probe in the micellar systems, in comparison with the bulk solvents.     

New insights on the photophysical behavior of PRODAN in anionic and cationic reverse micelles: from which state or states does it emit?

6-propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe because of its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer states (ICT) that can be particularly useful as a sensor. The nature of the emissive states has not yet been established despite the detailed experimental and theoretical investigations done on this fluorophore. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES) and time-resolved area normalized emission (TRANES) spectroscopies on the molecular probe PRODAN in the anionic water/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane and the cationic water/benzyl-n-hexadecyl dimethylammonium chloride (BHDC)/benzene reverse micelles (RMs). The experiments were done by varying the surfactant concentrations at a fixed molar ratio (W = [H2O]/[Surfactant]) and changing the water content at a constant surfactant concentration. The results obtained varying the surfactant concentration at W = 0 show a bathochromic shift and an increase in the intensity of the PRODAN emission band due to the PRODAN partition process between the external solvent and the RMs interface. The partition constants, Kp, are quantified from the changes in the PRODAN emission spectra and the steady-state anisotropy () with the surfactant concentration in both RMs. The Kp value is larger in the BHDC than the AOT RMs, probably due to the interaction between the cationic polar head of the surfactant and the aromatic ring of PRODAN. The partition process is confirmed with the TRES experiments, where the data fit to a continuous model, and with the time-resolved area normalized emission spectroscopy (TRANES) spectra, where only one isoemissive point is detected. On the other hand, the emission spectra at W = 10 and 20 show a dual fluorescence with a new band that emerges in the low-energy region of the spectra, a band that was previously assigned to the PRODAN emission from the water pool of RMs. Our studies demonstrate that this band is due to the emission from an ICT state of the molecular probe PRODAN located at the interface of the RMs. These results are also confirmed by the lifetime measurements, the TRES experiments where the results fit to a two-state model, and the time-resolved area normalized emission spectroscopy (TRANES) spectra where three or two isoemissive points are detected in the AOT and BHDC RMs, respectively. In the AOT RMs, Kp values obtained at W = 10 and 20 are almost independent of the water content; the values are higher for the BHDC RMs due to the higher micropolarity of this interface.     

Aggregation behavior of tetrakis(4-sulfonatophenyl)porphyrin in AOT/water/decane microemulsions

AOT/water/decane microemulsions have been used to entrap the water-soluble 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS4). Quasi-elastic light scattering technique has confirmed the confinement of the porphyrin and its various aggregates into the inner water pool. Various species have been detected as function of the size of the microemulsions, concentration of the porphyrin, pH, and aging of the solutions by using a combination of UV-vis absorption, steady fluorescence emission, fluorescence lifetime measurements, and time-resolved fluorescence anisotropy. Under neutral pH conditions, the porphyrin is present as the free base monomer (S414) in the inner water compartment, and it is free to rotate when the size of the droplet is large enough and the porphyrin concentration is low. On increasing the concentration and/or decreasing the microemulsion size, a H-dimer of the free base (S406) is prevalently formed. Aging both the S414 and S406 species leads to the formation of a new species (S424), which has been postulated as a H-type dimer of the diacid porphyrin. On decreasing the pH, the species S414 and S406 almost instantaneously convert into the diacid porphyrin, which is monomeric (S434). This latter is an intermediate in the eventual formation of J-aggregated TPPS4 (S490). A marked stability has been observed for the S424 species, which do not interconvert on changing the pH of the bulk aqueous phase.     

FTIR–ATR studies of water structure in reverse micelles during the synthesis of oxalate precursor nanoparticles

The structure of water in water-in-oil microemulsions used to synthesize oxalate precusor nanoparticles for the production of YBa₂Cu₃O_7−x (YBCO) superconductor powder has been studied by FTIR–ATR spectroscopy of the OH stretching band. Two initial microemulsions are mixed together and nanoparticles are formed by a precipitation reaction in the cores of the reverse micelles of the resulting microemulsion. The shapes of the water OH stretching bands for the microemulsions before and after the reaction exhibit noticeable differences when normalized at their peaks. These differences have been quantified by decomposing the water OH stretching band into three components corresponding to water molecules with different types of hydrogen bonding. In the microemulsion after the precipitation and formation of oxalate precusor nanoparticles, the structure of water is characterized with an increased fraction of bound water. These bound water molecules are also connected with stronger H-bonds. We propose that upon synthesis of the precursor nanoparticles, the observed water structure changes are due to a thin water layer formed around the newly synthesized nanoparticles.