Potential energy scans and vibrational assignments of cyclopropanecarboxylic acid and cyclopropanecarboxamide

The structural stability and internal rotations in cyclopropanecarboxylic acid and cyclopropanecarboxamide were investigated by the DFT-B3LYP and the ab initio MP2 calculations using 6-311G** and 6-311+G** basis sets. The computations were extended to the MP4//MP2/6-311G** and CCSD(T)//MP2/6-311G** single-point calculations. From the calculations the molecules were predicted to exist predominantly in the cis (C=O group eclipses the cyclopropane ring) with a cis-trans barrier of about 4-6kcal/mol. The OCOH torsional barrier in the acid was estimated to be about 12-13kcal/mol while the corresponding OCNH torsional barrier in the amide was calculated to be about 20kcal/mol. The equilibrium constant k for the cis<-->trans interconversion in cyclopropanecarboxylic acid was calculated to be 0.1729 at 298.15K that corresponds to an equilibrium mixture of about 85% cis and 15% trans. The vibrational frequencies were computed at the DFT-B3LYP level. Normal coordinate calculations were carried out and potential energy distributions were calculated for the low energy cis conformer of the molecules. Complete vibrational assignments were made on the basis of normal coordinate calculations and comparison with experimental data of the molecules.     

Rotational barriers in monomeric CH2=CX-COOH and CH2=CX-CONH2 (X is H or CH3) and vibrational analysis of methacrylic acid and methacrylamide

The internal rotations in acrylic and methacrylic acids CH2=CX-COOH and their amides CH2=CX-CONH2 (X is H or CH3) were investigated by DFT-B3LYP calculations with 6-311+G** basis set. The potential energy curves were consistent with two minima that correspond to planar cis and trans conformation in the case of the acids (or cis and near-trans forms in the case of the amides). Acrylic acid and acrylamide were predicted to have the cis form as the low and predominant conformation of the molecules. In the case of the methacrylic acid and methacrylamide, the conformational relative stability was predicted to reverse as going from the acrylic to the metha compounds. The trans conformer in methacrylic acid or the near-trans in methacrylamide were predicted to be thermodynamically low energy structures of the molecules. The CCCO rotational barrier was calculated to vary from 4 to 6kcal/mol in the four molecules. The OCOH and OCNH torsional barriers were calculated to be about 13 and 22kcal/mol in the acids and the amides, respectively. The vibrational frequencies of methacrylic acid and methacrylamide were computed at the DFT-B3LYP/6-311+G** level and reliable vibrational assignments were made on the basis of normal coordinate analyses and comparison with experimental data of both molecules in their low energy conformations.     

Potential energy distributions and potential scans for the internal rotation of two rotors in 3,3-dichloro and 3,3,3-trichloropropanals.

The conformational behavior and structural stability of 3,3-dichloropropanal and 3,3,3-trichloropropanal were investigated by ab initio calculations. The 6-311 + + G** basis set was employed to include polarization and diffuse functions in the calculations at B3LYP level. From the calculation, the trans conformer of 3,3,3-trichloropropanal was predicted to be the predominant conformer with about 2 kcal mol(-1) of energy lower than the cis form. Additionally, 3,3 dichloro-propanal was predicted to exist as a mixture of three stable conformers. The potential function scans were calculated for the two molecules from which the rotational barriers could be estimated. The vibrational frequencies were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations for the conformers of the two molecules. Vibrational Raman and infrared spectra of the mixture of the stable conformers were computed at 300 K.     

Three-fold barrier and normal coordinate analyses of (trihalomethyl)sulfenyl halides CX3-SX (X = F and Cl)

The structural stability of (trihalomethyl)sulfenyl halides CX3-SX (X is F and Cl) was investigated by DFT-B3LYP and ab initio MP2 calculations using 6-311 + G** basis set. Full energy optimizations were carried out from which the three-fold barrier about C-S bond was calculated to be about 3 kcal mol(-1) in (trifluoromethyl)sulfenyl fluoride and (trifluoromethyl)sulfenyl chloride and about 6 kcal mol(-1) in (trichloromethyl)sulfenyl fluoride and (trichloromethyl)sulfenyl chloride. The vibrational frequencies of the four molecules were computed at the DFT-B3LYP level and the vibrational assignments for the normal modes of the compounds in their ground state structure were made on the basis of normal coordinate calculations and reported experimental data.     

Normal coordinate analyses and barrier to internal rotation of nitroso- and nitroazides

The conformational and structural stability of nitrosoazide NNN-N=O and nitroazide NNN-NO2 were investigated by DFT-B3LYP and ab initio MP2 calculations with 6-311++G** basis set. From the calculations, nitrosoazide was predicted to exist predominantly in the planar trans (NNN and N=O groups are trans to each other) structure with high trans-cis rotational barrier of about 11 kcal mol-1 as a result of pronounced conjugation between the azide group and the N=O bond. The NO2 rotational barrier in nitroazide was predicted from the symmetric potential function to be of about 7 kcal mol-1. The vibrational frequencies were calculated at the DFT-B3LYP level and the infrared and Raman spectra of the cis-trans mixture were plotted. Complete vibrational assignments were made on the basis of normal coordinate calculations for the stable conformers of both molecules. For nitrosoazide, the calculated wavenumbers were compared to the corresponding experimental values obtained from early reported Raman spectrum of the molecule.     

A theoretical study of the rotational isomers of nitrosomethanol by semiempirical (AM1) and ab initio methods

The conformational potential energy surface as a function of the two internal torsion angles in C-nitrosomethanol has been obtained using the semiempirical AM1 method. Optimized geometries are reported for the local minima on this surface and also for the corresponding points on the HF/6-31G, 6-31G*, and 6-31G** surfaces. All methods predict cis and trans minima which occur in degenerate pairs, each pair being connected by a transition state of C_s symmetry. The AM1 structures are found to compare well with the corresponding ab initio structures. Ab initio HF/6-31G and HF/6-31G* harmonic vibrational frequencies are reported for the cis and trans forms of nitrosomethanol. When scaled appropriately the calculated frequencies are found to compare well with experimental frequencies. The ab initio calculations predict the energy barrier for cis → trans isomerization to be between 5.8 and 6.5 kcal/mol with the trans → cis isomerization barrier lying between 2.3 and 6.5 kcal/mol. The corresponding AM1 energy barriers are around 1 kcal/mol lower in energy. The ab initio calculations predict the barrier to conversion between the two cis rotamers to be very small with the AM1 value being around 1 kcal/mol. Both AM1 and ab initio calculations predict interconversion between trans rotamers to require between 1.2 and 1.4 kcal/mol.     

Vibrational spectra and analysis of acetohydrazide CH3-CO-NH-NH2

The structural stability of acetohydrazide CH(3)-CO-NH-NH(2) was investigated by DFT-B3LYP and ab initio MP2 calculations with 6-311+G** basis set. The C-N rotational barrier in the molecule was calculated to be about 26 kcal/mol that suggested the planar sp(2) nature of the nitrogen atom of the central NH moiety. The N atom of the terminal NH(2) group was predicted to highly prefer the pyramidal sp(3) structure with an inversion barrier of about 7-8 kcal/mol. The molecule was predicted to have a trans-syn (N-H bond is trans with respect to CO bond and NH(2) moiety is syn to C-N bond) conformation as the lowest energy structure. The vibrational frequencies were computed at B3LYP level of theory and normal coordinate calculations were carried out for the trans-syn acetohydrazide. Complete vibrational assignments were made on the basis of normal coordinate analyses and experimental infrared and Raman data.     

Molecular structure of the trans and cis isomers of metal-free phthalocyanine studied by gas-phase electron diffraction and high-level quantum chemical calculations: NH tautomerization and calculated vibrational frequencies

The molecular structure of the trans isomer of metal-free phthalocyanine (H2Pc) is determined using the gas electron diffraction (GED) method and high-level quantum chemical calculations. B3LYP calculations employing the basis sets 6-31G**, 6-311++G**, and cc-pVTZ give two tautomeric isomers for the inner H atoms, a trans isomer having D2h symmetry and a cis isomer having C2v symmetry. The trans isomer is calculated to be 41.6 (B3LYP/6-311++G**, zero-point corrected) and 37.3 kJ/mol (B3LYP/cc-pVTZ, not zero-point corrected) more stable than the cis isomer. However, Hartree-Fock (HF) calculations using different basis sets predict that cis is preferred and that trans does not exist as a stable form of the molecule. The equilibrium composition in the gas phase at 471 degrees C (the temperature of the GED experiment) calculated at the B3LYP/6-311++G** level is 99.8% trans and 0.2% cis. This is in very good agreement with the GED data, which indicate that the mole fraction of the cis isomer is close to zero. The transition states for two mechanisms of the NH tautomerization have been characterized. A concerted mechanism where the two H atoms move simultaneously yields a transition state of D2h symmetry and an energy barrier of 95.8 kJ/mol. A two-step mechanism where a trans isomer is converted to a cis isomer, which is converted into another trans isomer, proceeds via two transition states of C(s) symmetry and an energy barrier of 64.2 kJ/mol according to the B3LYP/6-311++G** calculation. The molecular geometry determined from GED is in very good agreement with the geometry obtained from the quantum chemical calculations. Vibrational frequencies, IR, and Raman intensities have been calculated using B3LYP/6-311++G**. These calculations indicate that the molecule is rather flexible with six vibrational frequencies in the range of 20-84 cm(-1) for the trans isomer. The cis isomer might be detected by infrared matrix spectroscopy since the N-H stretching frequencies are very different for the two isomers.     

Three rotor potential energy scans, conformational equilibrium constants and vibrational analysis of 3-fluoro-1-propanol CH(2)FCH(2)CH(2)OH

The conformational stability and the three rotor internal rotations in 3-fluoro-1-propanol were investigated by the DFT-B3LYP/6-311+G** and the ab initio MP2/6-311+G** levels of theory. The calculated potential energy curves of the molecule at both levels of theory were consistent with complex conformational equilibria of about 12 minima, all of which were predicted to have real frequencies at both the B3LYP and the MP2 levels. The lowest energy minimum in the potential curves of 3-fluoro-1-propanol was predicted to correspond to the Gauche-gauche-trans (Ggt) conformer in excellent agreement with microwave and electron diffraction results. The equilibrium constants for the conformational interconversion of the molecule were calculated and found to correspond to an equilibrium mixture of about 33% Ggt, 14% Ggg1 and 13% Gg1g and about 43% Ggt, 12% Ggg1 and 10% Gg1g distribution by the B3LYP/6-311+G** and the MP2/6-311+G** calculations, respectively, at 298.15K. The vibrational frequencies of each molecule in its three stable forms were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecule.     

C-S barrier and vibrational analyses of (halocarbonyl)sulfenyl halides XCO-SX (X = F, Cl, and Br)

The structural stability of (halocarbonyl)sulfenyl halides XCO-SX (X is F, Cl, and Br) was investigated by DFT-B3LYP and ab initio MP2 calculations using 6-311 + G(**) basis set. From the calculations the molecules were found to exist predominantly in the trans conformation (two halogen atoms are trans to each other). Full energy optimizations were carried out for the minima and the transition states (TS) at the two levels, from which the rotational barriers about C-S bond in the three molecules were calculated to be about 12-13 kcal mol(-1). The vibrational frequencies of (fluorocarbonyl)sulfenyl fluoride (FCO-SF), (chlorocarbonyl)-sulfenyl chloride (ClCO-SCl), and (bromocarbonyl)-sulfenyl bromide (BrCO-SBr) were computed at the DFT-B3LYP level and the vibrational assignments for the normal modes of the stable forms of the compounds were made on the basis of normal coordinate calculations and experimental data of the chloride.     

Density functional theory calculations of the internal rotations and vibrational spectra of 2-, 3- and 4-formyl pyridine

The torsional potentials, molecular conformations and vibrational spectra, of 2-, 3- and 4-formyl pyridine have been investigated using density functional theory (DFT) method with 6-31+G* basis set. From the calculations, 2-formyl pyridine and 3-formyl pyridine were predicted to exist predominantly in cis conformation with the cis-trans rotational barrier of 9.38 kcal/mol and 8.55 kcal/mol, respectively. The two equivalent planar structures of 4-formyl pyridine are separated by an energy barrier of 7.18 kcal/mol. The vibrational wavenumbers and the corresponding vibrational assignments of molecules in C(s) symmetry were examined theoretically and the calculated Infrared of the molecules in the cis conformation was plotted. Observed wavenumbers for normal modes were compared with those calculated from normal mode coordinate analysis carried out on the basis of DFT force fields using the standard 6-31+G* basis set of the theoretical optimized geometry.     

Conformational analysis and vibrational assignments of 2,2,3,3-tetrafluoro-1-propanol CHF2CF2CH2OH as three-rotors system

The conformational stability of 2,2,3,3-tetrafluoro-1-propanol was investigated by DFT-B3LYP/6-311+G** and ab initio MP2/6-311+G** calculations. The calculated potential energy curves of the molecule at DFT-B3LYP level were consistent with five distinct minima that correspond to gauche(-)-gauche-gauche (G1gg), trans-trans-gauche (Ttg), trans-gauche-gauche (Tgg), trans-gauche-gauche(-) (Tgg1) and gauche(-)-gauche-trans (G1gt) conformers in the order of decreasing relative stability. The equilibrium constants for the conformational interconversion of 2,2,3,3-tetrafluoro-1-propanol were calculated and found to correspond to an equilibrium mixture of about 38% G1gg, 28% Ttg, 13% Tgg, 11% Tggt and 10% G1gt conformations at 298.15K. The vibrational frequencies of 2,2,3,3,-tetrafluoro-1-propanol in its five stable forms were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecule.     

Conformational stability, vibrational assignmenents, barriers to internal rotations and ab initio calculations of 2-aminophenol (d 0 and d3)

The Raman (3700-100 cm(-1)) and infrared (4000-400 cm(-1)) spectra of solid 2-aminophenol (2AP) have been recorded. The internal rotation of both OH and NH2 moieties produce ten conformers with either Cs or C1 symmetry. However, the calculated energies as well as the imaginary vibrational frequencies reduce rotational isomerism to five isomers. The molecular geometry has been optimized without any constraints using RHF, MP2 and B3LYP levels of theory at 6-31G(d), 6-311+G(d) and 6-31++G(d,p) basis sets. All calculations predict 1 (cis; OH is directed towards NH2) to be the most stable conformation except RHF/6-31++G(d,p) basis set. The 1 (cis) isomer is found to be more stable than 8 (trans; OH is away from the NH2 moiety and the NH bonds are out-of-plane) by 1.7 kcal/mol (598 cm(-1)) as obtained from MP2/6-31G(d) calculations. Aided by experimental and theoretical vibrational spectra, cis and trans 2AP are coexist in solution but cis isomer is more likely present in the crystalline state. Aided by MP2 and B3LYP frequency calculations, molecular force fields, simulated vibrational spectra utilizing 6-31G(d) basis set as well as normal coordinate analysis, complete vibrational assignments for HOC6H4NH2 and DOC6H4ND2 have been proposed. Furthermore, we carried out potential surface scan, to determine the barriers to internal rotations of NH2 and OH groups. All results are reported herein and compared with similar molecules when appropriate.     

Photophysical studies of the trans to cis isomerization of the push-pull molecule: 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene (mepepy)

Organic molecules possessing intramolecular charge-transfer properties (D-pi-A type molecules) are of key interest particularly in the development of new optoelectronic materials as well as photoinduced magnetism. One such class of D-pi-A molecules that is of particular interest contains photoswitchable intramolecular charge-transfer states via a photoisomerizable pi-system linking the donor and acceptor groups. Here we report the photophysical and electronic properties of the trans to cis isomerization of 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene ligand (mepepy) in aqueous solution using photoacoustic calorimetry (PAC) and theoretical methods. Density functional theory (DFT) calculations demonstrate a global energy difference between cis and trans isomers of mepepy to be 8 kcal mol(-1), while a slightly lower energy is observed between the local minima for the trans and cis isomers (7 kcal mol(-1)). Interestingly, the trans isomer appears to exhibit two ground-state minima separated by an energy barrier of approximately 9 kcal mol(-1). Results from the PAC studies indicate that the trans to cis isomerization results in a negligible volume change (0.9 +/- 0.4 mL mol(-1)) and an enthalpy change of 18 +/- 3 kcal mol(-1). The fact that the acoustic waves associated with the trans to cis transition of mepepy overlap in frequency with those of a calorimetric reference implies that the conformational transition occurs faster than the approximately 50 ns response time of the acoustic detector. Comparison of the experimental results with theoretical studies provide evidence for a mechanism in which the trans to cis isomerization of mepepy results in the loss of a hydrogen bond between a water molecule and the pyridine ring of mepepy.     

Conformational analysis and comparison between theoretical and experimental vibrational spectra for chloroacetyl isocyanate

The conformational stability and vibrational infrared and Raman spectra of chloroacetyl isocyanate (CH2ClCONCO) were investigated by ab initio MP2 and density functional B3LYP calculations using the 6-311 + + G** basis set. From the potential energy scans of the internal rotations of both the halomethyl and the isocyanate rotors, chloroacetyl isocyanate was predicted to exist predominantly in a mixture of the cis-cis (chlorine atom and NCO group eclipse C=O bond) and the gauche-cis (one hydrogen atom and NCO group eclipse C=O bond) conformations with a comparable relative stability. The vibrational wavenumbers of each of the two conformers of the molecule were computed at DFT-B3LYP/6-311 + + G** level. Normal coordinate calculations were carried out to obtain the potential energy distributions (PED) among the symmetry coordinates of the normal modes for each of the stable conformers of chloroacetyl isocyanate. The theoretical vibrational assignments are compared with experimental ones and a ratio of observed/calculated wavenumbers of about 0.97-1.04 was obtained.     

Conformational energies for 2-substituted butanes

The conformational free energies for some 2-substituted butanes where X = F, Cl, CN, and CCH were calculated using G3-B3, CBS-QB3, and CCSD(T)/6-311++G(2d,p) as well as other theoretical levels. The above methods gave consistent results with free energies relative to the trans conformers as follows: X = CCH, g+ = 0.77 +/- 0.05 kcal/mol. g- = 0.88 +/- 0.05 kcal/mol; X = CN, g+ = 0.85 +/- 0.05 kcal/mol, g- = 0.75 +/- 0.05 kcal/mol; X = Cl, g+ = 0.70 +/- 0.05 kcal/ml, g- = 0.80 +/- 0.05 kcal/mol; and X = F, g+ = 0.53 +/- 0.05 kcal/mol, g- = 0.83 +/- 0.05 kcal/mol. The conformational free energies also were estimated using the observed liquid phase IR spectra and intensities calculated using B3LYP/6-311++G** and MP2/6-311++G**. The rotational free energy profiles for all of the compounds were estimated at the G3-B3 level.     

Theoretical investigation of the structure and vibrational spectra of carbamoyl azide

Molecular structure and vibrational frequencies of carbamoyl azide NH2CO-NNN have been investigated with ab initio and density functional theory (DFT) methods. The molecular geometries for all the possible conformers of the molecule were optimized using DFT-B3LYP, DFT-BLYP and MP2 applying the standard 6-311++G** basis set. From the calculations, the molecule was predicted to exist predominantly in cis conformation with the cis-trans rotational barrier of about 7.91-9.10 kcal/mol depending on the level of theory applied. The vibrational frequencies and the corresponding vibrational assignments of carbamoyl azide in Cs symmetry were examined theoretically and the calculated Infrared and Raman spectra of the molecule in the cis conformation were plotted. Observed frequencies for normal modes were compare with those calculated from normal mode coordinate analysis carried out on the basis of ab initio and DFT force fields using the standard 6-311++G** basis set of the theoretical optimized geometry. Theoretical IR intensities and Raman activities are reported.     

Investigation of conformational stability and vibrational spectra of halomethylsulfonyl isocyanates

The conformational behavior and structural stability of chloro- and fluoromethylsulfonyl isocyanates were investigated by quantum mechanical DFT and ab initio MP2 calculations. The 6-311++G^** basis set was employed to include polarization and diffuse functions in the calculations. The molecules were found to exist in a mixture of two stable gauche conformations. The potential scans were calculated from which the rotational barriers could be estimated. The vibrational frequencies and spectra were computed at B3LYP/6-311++G^** level. The potential energy distributions were then calculated to provide tentative vibrational assignment for the normal modes of the stable conformers of both molecules.     

Vibrational analyses of sulfamoyl halides NH2SO2X (X is F, Cl and Br)

The structural stability of sulfamoyl halides NH(2)-SO(2)X (X is F, Cl and Br) were investigated by DFT-B3LYP/6-311+G** and ab initio MP2/6-311+G** calculations. From the calculations the molecules were predicted to exist only in the anti (XS bond is anti with respect to nitrogen lone pair) conformation with the possibility of very low abundance of the syn (SO(2) and NH(2) groups eclipse each other) form of only the fluoride. The equilibrium constant for the syn<-->anti conformational conversion of sulfamoyl fluoride was calculated to be 0.0172 that corresponds to an equilibrium mixture of about 2% syn and 98% anti at 298.15K. The vibrational frequencies were computed at DFT-B3LYP level for the stable anti conformer of the d(0) and d(2) (ND(2)-SO(2)X) deuterated species of the three molecules. Normal coordinate calculations were then carried out and the potential energy distributions were calculated for the molecules.     

Vibrational assignment and structure of dibenzoylmethane. A density functional theoretical study

Molecular structure and vibrational frequencies of 1,3-diphenyl-1,3-propanedione, known as dibenzoylmethane (DBM), have been investigated by means of density functional theory (DFT) calculations. The results were compared with those of benzoylacetone (BA) and acetylacetone (AA), the parent molecule. IR and Raman spectra of DBM and its deuterated analogue were clearly assigned.The calculated hydrogen bond energy of DBM is 16.15 kcal/mol, calculated at B3LYP/6-311++G** level of theory, which is 0.28 kcal/mol more than that of AA. This result is in agreement with the vibrational and NMR spectroscopy results. The molecular stability and the hydrogen bond strength were investigated by applying the Natural Bond Orbital analysis (NBO) and geometry calculations. The theoretical calculations indicate that the hydrogen bond in DBM is relatively stronger than that in BA and AA.