Self-assembled monolayers of a bis(pyrazol-1-yl)pyridine-substituted thiol on Au(111)

Self-assembled monolayers (SAMs) of a bis(pyrazol-1-yl)pyridine-substituted thiol (bpp-SH) on Au (111)/mica were studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Using substrates precoated with perylene-3,4,9,10-tetracarboxylic acid dianhydride (PTCDA), preparation at elevated temperatures yields highly ordered layers whose structure is described by a rectangular (5 x radical3) unit cell containing one molecule. The bis(pyrazol-1-yl)pyridine (bpp) units exhibit pi-stacking along the 112 direction, and they are tilted significantly. We conclude the three imine nitrogen atoms in the bpp headgroup adopt a trans,trans arrangement.     

Adsorption states of dialkyl ditelluride autooxidized monolayers on Au(111)

Organic ditellurides (R2Te2 where R = n-butyl (C4), n-octyl (C8), and n-cetyl (C16)) were synthesized, and their adsorption states after oxidation on Au(111) surfaces were studied by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), theoretical analyses, near-edge X-ray absorption fine structure (NEXAFS) measurements, contact angle measurements, and atomic force microscopy (AFM). The obtained results show that dialkyl ditellurides form autooxidized monolayers (AMs) on the surfaces under ambient conditions and that the oxidation process is accelerated by ambient light. XPS, UPS, and theoretical analyses suggest that the autooxidized ditelluride species consist of polymers or oligomers with Te-O-Te-O network structures stabilized by oxygen bridges between tellurium molecules following the cleavage of tellurium-gold bonds. NEXAFS and contact angle measurements indicate that the average tilt angles of the alkyl chains from the surface normal are smaller for the AMs of dialkyl ditellurides having longer alkyl chains. AFM measurements show defects and roughness features around a few angstroms in height on the surfaces of the dialkyl ditelluride AMs.     

Bonding structure of phenylacetylene on hydrogen-terminated Si(111) and Si(100): surface photoelectron spectroscopy analysis and ab initio calculations

Interfaces between phenylacetylene (PA) monolayers and two silicon surfaces, Si(111) and Si(100), are probed by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and the results are analyzed using ab initio molecular orbital calculations. The monolayer systems are prepared via the surface hydrosilylation reaction between PA and hydrogen-terminated silicon surfaces. The following spectral features are obtained for both of the PA-Si(111) and PA-Si(100) systems: a broad π-π* shakeup peak at 292 eV (XPS), a broad first ionization peak at 3.8 eV (UPS), and a low-energy C 1s → π* resonance peak at 284.3 eV (NEXAFS). These findings are ascribed to a styrene-like π-conjugated molecular structure at the PA-Si interface by comparing the experimental data with theoretical analysis results. A conclusion is drawn that the vinyl group can keep its π-conjugation character on the hydrogen-terminated Si(100) [H:Si(100)] surface composed of the dihydride (SiH(2)) groups as well as on hydrogen-terminated Si(111) having the monohydride (SiH) group. The formation mechanism of the PA-Si(100) interface is investigated within cluster ab initio calculations, and the possible structure of the H:Si(100) surface is discussed based on available data.     

Tripodal Binding Units for Self-Assembled Monolayers on Gold: A Comparison of Thiol and Thioether Headgroups

Whereas thiols and thioethers are frequently used as binding units of oligodentate precursor molecules to fabricate self-assembled monolayers (SAMs) on coinage metal and semiconductor surfaces, their use for tridentate bonding configuration is still questionable. Against this background, novel tridentate thiol ligands, PhSi(CH(2)SH)(3) (PTT) and p-Ph-C(6)H(4)Si(CH(2)SH)(3) (BPTT), were synthesized and used as tripodal adsorbate molecules for the fabrication of SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The PTT and BPTT films were compared with the analogous systems comprised of same tripodal ligands with thioether instead of thiol binding units (anchors). XPS and NEXAFS data suggest that the binding uniformity, packing density, and molecular alignment of the thiol-based ligands in the respective SAMs is superior to their thioether counterparts. In addition, the thiol-based films showed significantly lower levels of contamination. Significantly, the quality of the PTT SAMs on Au(111) was found to be even higher than that of the films formed from the respective monodentate counterpart, benzenethiol. The results obtained allow for making some general conclusions on the specific character of molecular self-assembly in the case of tridentate ligands.     

Dissociative and non-dissociative adsorption of selenophene on Au(1 1 1) depending on the preparation method

Selenophene (C₄H₄Se) monolayers on Au(1 1 1) were prepared by two different methods: ultrahigh vacuum (UHV) and atmospheric vapor adsorption method. Near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) results clearly indicate that the two monolayers are in different chemical forms; selenophene is molecularly adsorbed under UHV condition, while it is dissociatively chemisorbed via the C–Se bond cleavage under atmospheric condition. The dissociative chemisorption under atmospheric condition is interpreted in terms of the trapping mediated adsorption in the presence of a high-pressure ambient gas phase.     

Structural study of NO adsorbed on the reconstructed Pt(110)-(1 x 2) surface with X-ray photoelectron diffraction and near-edge X-ray absorption fine structure spectroscopy

The adsorption structure of NO on the reconstructed Pt(110)-(1 x 2) surface was studied with X-ray photoelectron spectroscopy (XPS), X-ray photoelectron diffraction (XPD), low-energy scanned-angle photoelectron diffraction (LESA-PD), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The experiments were performed at 180 K, where no surface lifting from (1 x 2) to (1 x 1) takes place after NO adsorption. XPS indicates that the (1 x 2) unit cell of the Pt(110) surface contains 1.5 NO molecules at the saturated coverage. XPD and LESA-PD analyses allow us to propose a structural model for the NO adlayer, where two-thirds of the NO molecules in the (1 x 2) unit cell are adsorbed on the atop site of the close-packed Pt rows (ridges) along the [10] direction with an inclined geometry and one-third of the NO molecules adsorb on the bridge site between the Pt ridges with an upright configuration. This model is supported by the N K-edge NEXAFS experiments and is consistent with the recently reported model based on the density functional theory (Orita, H.; Nakamura, I.; Fujitani, T. J. Phys. Chem. B 2005, 109, 10312).     

X-ray spectroscopy of heterocyclic biochemicals: xanthine, hypoxanthine, and caffeine

The electronic structures of the purine derivatives xanthine, hypoxanthine and caffeine have been investigated in the gas phase using C, N, and O 1s X-ray photoemission (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The results have been interpreted by means of ab initio calculations using the third-order algebraic-diagrammatic construction (ADC(3)) method for the one-particle Green's function and the second-order ADC method (ADC(2)) for the polarization propagator. The carbon, nitrogen and oxygen K-edge NEXAFS spectra of xanthine and caffeine are very similar, since the molecules differ only by substitution of three hydrogen atoms by methyl groups. For hypoxanthine, the electronic structure and spectra differ considerably from xanthine as the purine ring is more highly conjugated, and there is one less oxo group. Effects due to oxo-hydroxy tautomerism were not observed. However, the two oxo tautomeric forms of hypoxanthine oxo-N(9)-H and oxo-N(7)-H are populated in the gas phase, and the C 1s spectra can be simulated only by taking account of these two tautomers, with appropriate Boltzmann population ratios which we have also calculated. For xanthine and caffeine, single tautomeric forms were observed.     

Surface structure and chemical switching of thioctic acid adsorbed on Au(111) as observed using near-edge X-ray absorption fine structure

Thioctic acid (alpha-lipoic acid) is a molecule with a large disulfide-containing base, a short alkyl chain with four CH2 units, and a carboxyl termination. Self-assembled monolayer (SAM) films ofthioctic acid adsorbed on Au(111) have been investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) to determine film quality, bonding, and morphology. Using standard preparation protocols for SAMs, that is, dissolving thioctic acid in ethanol and exposing gold to the solution, results in poor films. These films are highly disordered, contain a mixture of carboxyl and carboxylate terminations, have more than monolayer coverage, and exhibit unbound disulfide. Conversely, forming films by dissolving 1 mmol thioctic acid into 5% acetic acid in ethanol (as previously reported with carboxyl-terminated alkanethiols) forms ordered monolayers with small amounts of unbound sulfur. NEXAFS indicates tilted over endgroups with the carboxyl group normal on average 38 degrees from the surface normal. Slight angle-dependent intensity modulations in other features indicate alkyl chains statistically more upright than prostrate on the surface. Reflection-absorption Fourier transform infrared (RA-FTIR) spectra indicate hydrogen bonding between neighboring molecules. In such well-formed monolayers, a stark reorientation occurs upon deprotonation of the endgroup by rinsing in a KOH solution. The carboxylate plane normal is now about 66 degrees from sample normal, a much more upright orientation. Data indicate this reorientation may also cause a more upright orientation to the alkyl portion of the molecules.     

Characterization of protein immobilization at silver surfaces by near edge X-ray absorption fine structure spectroscopy

Ribonuclease A (RNase A) is immobilized on silver surfaces in oriented and random form via self-assembled monolayers (SAMs) of alkanethiols. The immobilization process is characterized step-by-step using chemically selective near-edge X-ray absorption fine structure spectroscopy (NEXAFS) at the C, N, and S K-edges. Causes of imperfect immobilization are pinpointed, such as oxidation and partial desorption of the alkanethiol SAMs and incomplete coverage. The orientation of the protein layer manifests itself in an 18% polarization dependence of the NEXAFS signal from the N 1s to pi* transition of the peptide bond, which is not seen for a random orientation. The S 1s to C-S sigma* transition exhibits an even larger polarization dependence of 41%, which is reduced to 5% for a random orientation. A quantitative model is developed that explains the sign and magnitude of the polarization dependence at both edges. The results demonstrate that NEXAFS is able to characterize surface reactions during the immobilization of proteins and to provide insight into their orientations on surfaces.     

Intermixed terpyridine-functionalized monolayers on gold: nonlinear relationship between terpyridyl density and metal ion coordination properties

Aiming at the functionalization of surfaces with terpyridine anchors for the coordinative deposition of additional layers, mixed self-assembled monolayers (SAMs) were prepared from binary solutions of 12-(2,2':6',2″-terpyridine-4'-yl)dodecane-1-thiol (TDT) and 1-decanethiol (DT). The SAMs and the order of the constituting molecules were analyzed by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and time-of-flight-secondary ion mass spectrometry (ToF-SIMS). The composition of the (TDT/DT)-SAMs and with it the surface density of terpyridyl groups correlates linearly with the relative concentrations of the two compounds in the solution used for depositing them. In marked contrast, the amount of terpyridine-coordinated Pd(II) ions significantly deviates from this trend with an optimum at a 1:3 ratio of TDT/DT. This indicates a major fraction of the terpyridines in TDT-rich SAMs not to be accessible for Pd(II) ion coordination. In agreement, NEXAFS spectroscopy reveals the alkyl backbones in TDT-rich SAMs not to be ordered, while they are preferentially upright oriented in the optimal 1:3-(TDT/DT)-SAMs. We interpret this in terms of terpyridine backfolding in TDT-rich SAMs, while they are located in accessible positions on top of the SAM in the 1:3-(TDT/DT)-SAM. While the alkyl backbones in the 1:3-(TDT/DT)-SAM are ordered, NEXAFS spectroscopy shows the terpyridyl groups not to have a preferential orientation in this SAM and thus retain enough flexibility to adjust to molecules that are deposited on top of the mixed SAM. In conclusion, the novel SAM does not undergo phase separation and consists predominantly of intermixed phases with adjustable surface density of quite flexible terpyridine anchor groups. The terpyridine-Pd(II) anchors are not only available for a future deposition of the next layer, but the metal ions also represent a sensitive probe for the accessibility of the terpyridyl groups.     

Effect of ring substitution position on the structural conformation of mercaptobenzoic acid self-assembled monolayers on Au(111)

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, photoemission spectroscopy (PES), and contact angle measurements have been used to examine the structure and bonding of self-assembled monolayers (SAMs) prepared on Au(111) from the positional isomers of mercaptobenzoic acid (MBA). The isomer of MBA and solvent chosen in SAM preparation has considerable bearing upon film morphology. Carbon K-edge NEXAFS measurements indicate that the monomers of 2-, 3-, and 4-MBA have well-defined orientations within their respective SAMs. Monomers of 3- and 4-MBA assume an upright orientation on the Au substrates in monolayers prepared using an acetic acid in ethanol solvent. The aryl ring and carboxyl group of these molecules are tilted from the surface normal by a colatitudal angle of approximately 30 degrees . Preparation of 4-MBA SAMs using pure ethanol solvent, a more traditional means of synthesis, had no appreciable effect upon the monomer orientation. Nonetheless, S(2p) PES measurements illustrate that it results in extensive bilayer formation via carboxyl group hydrogen-bonding between 4-MBA monomers. In 2-MBA monolayers prepared using acetic acid/ethanol solvent, the monomers adopt a more prostrate orientation on the Au substrates, in which the aryl ring and carboxyl group of the molecules are tilted approximately 50 degrees from the surface normal. This configuration is consistent with an interaction between both the mercaptan sulfur and carboxyl group of 2-MBA with the underlying substrate. S(2p) and C(1s) PES experiments provide supporting evidence for a bidentate interaction between 2-MBA and Au(111).     

Tailoring the Cu(100) work function by substituted benzenethiolate self-assembled monolayers

The structure and electronic interface properties of five differently substituted benzenethiol based self-assembled monolayers (SAMs) on Cu(100) have been studied by means of low energy electron diffraction, thermal desorption spectroscopy, X-ray absorption spectroscopy (NEXAFS), and UV photoelectron spectroscopy. Because highly ordered SAMs are formed of which lateral density had been precisely determined, effective molecular dipole moments were derived from the measured work function shifts. These values are compared with gas phase dipole moments computed by quantum chemical calculations for the individual thiol molecules considering the molecular orientation determined from NEXAFS data. Furthermore, this comparison yields clear evidence for a coverage dependent depolarization effect of the adsorbed molecules within the SAMs.     

Surface microscopic structure and electrochemical rectification of a branched alkanethiol self-assembled monolayer

The tert-butanethiol self-assembled monolayers (SAMs) on Au(111) surfaces were prepared from various solvents and investigated by a combination of scanning tunneling microscopy (STM) and electrochemistry in aqueous environments. High-resolution STM images reveal a (radical(7) x radical(7))R19 degrees surface lattice structure, in contrast with the conventional lattice (radical(3) x radical(3))R30 degrees structure for straight-chain alkanethiol SAMs. Interestingly, such a branched monolayer shows electrochemical rectification toward redox probes. We suggest that electrochemical rectification could be a general characteristic of short-chain branched alkanthiol SAMs, and originate in localized electronic effects.     

Influence of end group and surface structure on the current-voltage characteristics of alkanethiol monolayers on Au(111)

We present density functional theory calculations of the electronic structure and tunneling characteristics of alkanethiolate monolayers on Au(111). We systematically analyze radical3 x radical3 full coverage monolayers of SC6H12X molecules with different terminal groups, X=CH3, NH2, SH, OH, COOH, OCH3, on defect-free ("perfect") Au(111). We also study the influence of the surface-molecule bonding structure by comparing the properties of monolayers of SC6H12CH3 molecules on the perfect surface and on Au(111) surfaces with vacancies or adatoms. The tunneling currents (I) through the adsorbed monolayers with a single chemical contact have been calculated within the Tersoff-Hamann approach for voltages between -1 and +1 V. Computed currents are found to depend linearly on V at low voltage, with typical values of approximately 60 and 150 pA/molecule at 0.2 and 0.5 V, respectively, in good agreement with several experimental data. Computed tunneling currents show also a significant dependence on both the terminal group X and the surface structure. In particular, in order of decreasing intensities, currents for the different end groups are NH2 approximately SH>CH3>OH>OCH3>COOH. The relationships between the tunneling current, the work function of the surface+SAM, and the lineup of the HOMO with respect to the Fermi energy of the metal surface are examined.     

Polymeric brushes as functional templates for immobilizing ribonuclease A: study of binding kinetics and activity

The ability to immobilize proteins with high binding capacities on surfaces while maintaining their activity is critical for protein microarrays and other biotechnological applications. We employed poly(acrylic acid) (PAA) brushes as templates to immobilize ribonuclease A (RNase A), which is commonly used to remove RNA from plasmid DNA preparations. The brushes are grown by surface-anchored atom-transfer radical polymerization (ATRP) initiators. RNase A was immobilized by both covalent esterification and a high binding capacity metal-ion complexation method to PAA brushes. The polymer brushes immobilized 30 times more enzyme compared to self-assembled monolayers. As the thickness of the brush increases, the surface density of the RNase A increases monotonically. The immobilization was investigated by ellipsometry, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). The activity of the immobilized RNase A was determined using UV absorbance. As much as 11.0 microg/cm(2) of RNase A was bound to PAA brushes by metal-ion complexation compared to 5.8 microg/cm(2) by covalent immobilization which is 30 and 16 times the estimated mass bound in a monolayer. The calculated diffusion coefficient D was 0.63 x 10(-14) cm(2)/s for metal-ion complexation and 0.71 x 10(-14) cm(2)/s for covalent immobilization. Similar values of D indicate that the binding kinetics is similar, but the thermodynamic equilibrium coverage varies with the binding chemistry. Immobilization kinetics and thermodynamics were characterized by ellipsometry for both methods. A maximum relative activity of 0.70-0.80 was reached between five and nine monolayers of the immobilized enzyme. However, the relative activity for covalent immobilization was greater than that of metal-ion complexation. Covalent esterification resulted in similar temperature dependence as free enzyme, whereas metal-ion complexation showed no temperature dependence indicating a significant change in conformation.     

Ambient-ageing processes in amine self-assembled monolayers on microarray slides as studied by ToF-SIMS with principal component analysis, XPS, and NEXAFS spectroscopy

We investigated the ageing of amine-terminated self-assembled monolayers (amine-SAMs) on different silica substrates due to exposure to different ambient gases, pressures, and/or temperatures using time-of-flight secondary ion mass spectrometry (ToF-SIMS) with principal component analysis and complementary methods of surface analysis as X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS). The goal of this study is to examine the durability of primary amine groups of amine-SAMs stored in a user laboratory prior to being used as supports for biomolecule immobilization and other applications. We prepared amine-SAMs on the native oxides of silicon wafers and glass slides using 3-aminopropyl triethoxysilane, by using optimized conditions such as anhydrous organic solvent and reaction time scale of hours to avoid multilayer growth. Selected commercial amine-SAM slides have been investigated, too. When the amine-SAMs are exposed to air, oxygen incorporation occurs, followed by formation of amide groups. The formation of oxygen species due to ageing was proved by ToF-SIMS, XPS, and NEXAFS findings such as CNO(-) secondary ion emission at m/z 42, observation of the N 1s HNC=O component peak at 400.2-400.3 eV in XPS, and, last but not least, by formation of a π*(HNC=O) resonance at 401 eV in the N K-edge X-ray absorption spectrum. It is concluded that the used multi-method approach comprising complementary ToF-SIMS, XPS, and NEXAFS analyses is well suited for a thorough study of chemical aspects of ageing phenomena of amine-SAM surfaces.     

The electronic structure and adsorption geometry of L-histidine on Cu(110)

The adsorption of L-histidine on clean and oxygen-covered Cu(110) surfaces has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The valence band spectra, carbon, nitrogen and oxygen 1 s XPS and N K edge absorption spectra were measured for submonolayer, monolayer, and multilayer films. The spectra provide a detailed picture of the electronic structure and adsorption geometry at each coverage. In the monolayer, the histidine molecules are randomly oriented, in contrast to the submonolayer regime, where the molecules are coordinated to the copper surface with the imidazole functional group nearly parallel to, and strongly interacting with, the surface. The pi*/sigma* intensity ratio in NEXAFS spectra at the nitrogen edge varies strongly with angle, showing the imidazole ring is oriented. Adsorption models are proposed.     

Orientation of pentacene molecules on SiO2: from a monolayer to the bulk

Near edge x-ray absorption fine structure (NEXAFS) spectroscopy is used to study the orientation of pentacene molecules within thin films on SiO2 for thicknesses ranging from monolayers to the bulk (150 nm). The spectra exhibit a strong polarization dependence of the pi* orbitals for all films, which indicates that the pentacene molecules are highly oriented. At all film thicknesses the orientation varies with the rate at which pentacene molecules are deposited, with faster rates favoring a thin film phase with different tilt angles and slower rates leading to a more bulklike orientation. Our NEXAFS results extend previous structural observations to the monolayer regime and to lower deposition rates. The NEXAFS results match crystallographic data if a finite distribution of the molecular orientations is included. Damage to the molecules by hot electrons from soft x-ray irradiation eliminates the splitting between nonequivalent pi* orbitals, indicating a breakup of the pentacene molecule.     

New insights in the c(4 x 2) reconstruction of hexadecanethiol on Au(111) revealed by grazing incidence X-ray diffraction

The c(4 x 2) structure of C16H33SH alkanethiol monolayers self-assembled on Au(111) has been studied by grazing incidence X-ray diffraction. This structure coexists on the surface with the (radical3x radical3)R30 degrees phase. The structural refinement of the c(4 x 2) phase has been accomplished by omitting the fractional order reflections common to both structures. The surface unit cell consists of four symmetry-independent molecules with atomic displacements related by couples, such that only two nonequivalent chains are present in the surface cell. The stability between neighbor chains is due to van der Waals interactions. The substrate plays an important and non-negligible role in the c(4 x 2) reconstruction. The lateral and normal substrate relaxations to the surface plane are small, and gold atom displacements are lower than 0.25 angstroms but contribute very strongly to the fractional order intensities. The molecular chains form a close packed structure tilted by 37 degrees from the surface normal with no indications of dimer formation between closest S atoms.     

Structural characterization of aldehyde-terminated self-assembled monolayers

The structure of aldehyde-terminated alkanethiol self-assembled monolayers (SAMs) on Au(111) is investigated using scanning tunneling microscopy (STM), atomic force microscopy (AFM), and density functional theory (DFT) calculations. For the first time, the structures of aldehyde-terminated SAMs are revealed with molecular resolution. SAMs of 11-mercapto-1-undecanal exhibit the basic (radical3xradical3)R30 degrees periodicity and form various c(4x2) superstructures upon annealing. In conjunction with DFT studies, the models of the (radical3xradical3)R30 degrees and the c(4x2) superstructures are constructed. In comparison with alkanethiol SAMs, the introduction of aldehyde-termini results in smaller domain size, lower degree of long-range order, large coverage of disordered areas, and higher density of missing molecules and other point defects within domains of closely packed molecules. The origin of these structural differences is mainly attributed to the strong dipole-dipole interactions among the aldehyde termini.