Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.     

Synthesis and photochromic properties of 1,3-diaminopropane-induced MoO3 powder

In the present work, molybdenum trioxide (MoO₃) powder with novel morphology and good photochromic properties was successfully synthesized via a facile chemical method. The capping agent 1,3-diaminopropane (DAP) was found to be vital in the formation of the morphology, as well as the good photochromism of MoO₃. The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), N₂ adsorption-desorption analysis (BET) and ultraviolet and visible spectroscopy (UV-vis).     

Synthesis of nanocrystalline Zn0.5Mn0.5Fe2O4 via in situ polymerization technique

Nanocrystalline Zn_0.5Mn_0.5Fe₂O₄ was synthesized through the pyrolysis of polyacrylate salt precursors prepared via in situ polymerization of the metal salts and acrylic acid. The pyrolysis behavior of the polymeric precursors was studied by use of thermal analysis. The as-obtained product was characterized by powder X-ray diffraction (XRD), transmission electron microscope (TEM), electron diffraction (ED) pattern, scanning electron microscopy (SEM) and electron dispersive X-ray (EDX) analysis. The results revealed that the particle size is in the range of 15–25 nm for Zn-Mn ferrites with good crystallinity. Magnetic properties of the sample at 300 K were measured using a vibrating sample magnetometer, which showed that the sample exhibited characteristics of superparamagnetism.     

Preparation and Characterization of Polypyrrole/Ferrospinel Nanocomposite by W/O Microemulsion Pathway

A polypyrrole/ferrospinel(NiFe₂O₄) nanocomposite was prepared by the in situ chemical oxidizing of pyrrole in the presence of NiFe₂O₄ nanoparticles in water-in-oil (w/o) microemulsion. The structural, morphological, and magnetic properties of the as-prepared polypyrrole/NiFe₂O₄ nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements. XRD and FTIR revealed the presence of NiFe₂O₄ in the nanocomposite. SEM and TEM images illustrated that polypyrrole was coated on the NiFe₂O₄ surface. The electromagnetic parameters, such as conductivity, saturation magnetization, and coercivity of NiFe₂O₄ nanoparticles varied after coating with polypyrrole.     

Novel Pd-Cu/bacterial cellulose nanofibers: Preparation and excellent performance in catalytic denitrification

In this work, we describe a novel facile method to prepare long one-dimensional hybrid nanofibers by using hydrated bacterial cellulose nanofibers (BCF) as template. Palladium-copper nanoparticles were prepared in BCF by immersing BCF in a mixture solution of PdCl₂ and CuCl₂ in water and followed reduction of absorbed metallic ion inside of BCF to the metallic Pd-Cu nanoparticles using potassium borohydride. The bare BCF and the composites were characterized by a range of analytical techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results reveal that the Pd-Cu nanoparticles were homogeneously precipitated on the BCF surface. The Pd-Cu/BCF was used as a catalyst for water denitrification, which showed that it has high catalytic activity.     

Electron beam-physical vapor deposition of SiC/SiO2 high emissivity thin film

When heated by high-energy electron beam (EB), SiC can decompose into C and Si vapor. Subsequently, Si vapor reacts with metal oxide thin film on substrate surface and formats dense SiO₂ thin film at high substrate temperature. By means of the two reactions, SiC/SiO₂ composite thin film was prepared on the pre-oxidized 316 stainless steel (SS) substrate by electron beam-physical vapor deposition (EB-PVD) only using β-SiC target at 1000 °C. The thin film was examined by energy dispersive spectroscopy (EDS), grazing incidence X-ray asymmetry diffraction (GIAXD), scanning electron microscopy (SEM), atomic force microscopy (AFM), backscattered electron image (BSE), electron probe microanalysis (EPMA), X-ray photoelectron spectroscopy (XPS) and Fourier transformed infra-red (FT-IR) spectroscopy. The analysis results show that the thin film is mainly composed of imperfect nano-crystalline phases of 3C-SiC and SiO₂, especially, SiO₂ phase is nearly amorphous. Moreover, the smooth and dense thin film surface consists of nano-sized particles, and the interface between SiC/SiO₂ composite thin film and SS substrate is perfect. At last, the emissivity of SS substrate is improved by the SiC/SiO₂ composite thin film.     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

Investigation of the characteristics and corrosion resistance of Al2O3/TiN coatings

Al₂O₃ /TiN double and Al₂O₃/Cr/TiN triple coatings were produced on stainless steel substrates using plasma-detonation techniques. Investigation of the microstructure and characteristics of the coatings after the preparation was performed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Auger electron spectroscopy (AES). The corrosion resistance of the coatings was studied in several electrolytic solutions (0.5 M H₂SO₄, 1 M HCl, 0.75 M NaCl) using electrochemical techniques (open circuit potential, cyclovoltammetry and potentiodynamic polarization). The obtained results showed, in most of the cases, an improvement of the corrosion resistance, except in NaCl solutions. The effect of the controlled thickness of TiN and Cr layers as well as the additional treatment with a high-current electron beam was also investigated. Nuclear reaction analysis (NRA), Rutherford backscattering spectroscopy (RBS) and scanning electron microscopy (SEM) were applied for the characterization of the samples before and after the corrosion experiments.     

Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix

Nanometer-scale TiO₂ particles have been synthesized by sol-gel method. It was incorporated in a glass-based silica aerogel. The composite was characterized by various techniques such as particle size analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and photoluminescence (PL). The bulk glass presents a strong luminescence at wavelengths ranging from 750 to 950 nm. This PL was attributed to various non-bridging oxygen hole centers (NBOHCs) defects resulting from thermal treatment and crystallization of TiO₂ at the interface between titania nanoparticles and silica host matrix.     

Preparation and characterization of the transparent nanocomposite mirror film for the infrared region by sol–gel method

Transparent mirror coated, SiO₂–Ag/PV P nanocomposites were prepared on the Pyrex glass slides by dip-coating technique. Embedding of the silver (Ag) nanoparticles on silica modified polyvinyl pyrrolidone (PVP) was performed by the sol–gel method. As prepared transparent mirror coated SiO₂–Ag/PV P nanocomposite films were finally characterized for surface morphology, chemistry, and nano size dimensions using various advanced analytical techniques including, UV visible, Fourier transform, infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), dispersive x-ray analaysis (EDAX) and transmission electron microscopy (TEM) analysis. It was found that all the prepared samples were almost uniform particles of Ag nanospheres of 7–8 nm diameters arranged as double paralleled nanowires with an average length of 200–450 nm and diameters of around 20–25 nm.     

Fabrication of chain-like Mn2O3 nanostructures via thermal decomposition of manganese phthalate coordination polymers

A novel manganese coordination polymer [Mn(Pht)(H₂O)]_n as a precursor was obtained by chemical precipitation involving an aqueous solution of anhydrous manganese acetate and phthalate anion as a potential O-banded ligand. Fourier transform infrared (FT-IR) results proved that phthalate anions coordinate to metal cations as a chelating bidentate ligand, making polymeric structure. The Mn₂O₃ nanostructures have been prepared via thermal decomposition of as-prepared manganese phthalate polymers as precursor in the presence of oleic acid (OA) and triphenylphosphine (TPP) as a stabilizer and capping. Different approaches such as FT-IR, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were applied to characterize the products. TEM images and XRD analysis indicated that the as-synthesized chain-like Mn₂O₃ has a crystal phase of cubic syngony with a mean size of ∼40 nm.     

Rapid extra-/intracellular biosynthesis of gold nanoparticles by the fungus <Emphasis Type="Italic">Penicillium</Emphasis> sp.

In this work, the fungus Penicillium was used for rapid extra-/intracellular biosynthesis of gold nanoparticles. AuCl₄ ⁻ ions reacted with the cell filtrate of Penicillium sp. resulting in extracellular biosynthesis of gold nanoparticles within 1 min. Intracellular biosynthesis of gold nanoparticles was obtained by incubating AuCl₄ ⁻ solution with fungal biomass for 8 h. The gold nanoparticles were characterized by means of visual observation, UV–Vis absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The extracellular nanoparticles exhibited maximum absorbance at 545 nm in UV–Vis spectroscopy. The XRD spectrum showed Bragg reflections corresponding to the gold nanocrystals. TEM exhibited the formed spherical gold nanoparticles in the size range from 30 to 50 nm with an average size of 45 nm. SEM and TEM revealed that the intracellular gold nanoparticles were well dispersed on the cell wall and within the cell, and they are mostly spherical in shape with an average diameter of 50 nm. The presence of gold was confirmed by EDX analysis.     

Effect of TiO2 nanoparticle size on the performance of PVDF membrane

The comparison of the performance and morphology was carried out between neat PVDF membrane and PVDF composite membranes with nanosized TiO₂ particles of different size. The results of permeability and instrumental analysis illustrated that nanometer size obviously affected the performance and structure of the PVDF membranes. The smaller nanoparticles could improve the antifouling property of the PVDF membrane more remarkably. The surface and cross-section of the membranes were observed with an atomic force microscopy (AFM), a scanning electron microscope (SEM). The TiO₂/PVDF membrane with smaller nanoparticles had smaller mean pore size on its surface and more apertures inside the membrane. X-ray diffraction (XRD) experiments also suggested that smaller TiO₂ nanoparticles had stronger effect on the crystallization of PVDF molecules.     

Fabrication of flower-shaped Bi2O3 superstructure by a facile template-free process

A novel flower-shaped Bi₂O₃ superstructure has been successfully synthesized by calcination of the precursor, which was prepared via a citric acid assisted hydrothermal process. The precursor and Bi₂O₃ were characterized with respect to morphology, crystal structure and elemental chemical state by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It was shown that both the precursor and Bi₂O₃ flower-shaped superstructure were constructed of numerous nanosheets while the nanosheets consisted of a great deal of nanoparticles. Furthermore, key factors for the formation of the superstructures have been proposed; a mechanism for the growth of the superstructure has been presented based on the FESEM investigation of different growth stages.     

Synthesis of VO2 (B) nanorods for Li battery application

Vanadium dioxide nanorods were synthesized through a hydrothermal reaction from V₂O₅ xerogel, poly(vinyl pyrrolidone) (PVP) and lithium perchlorate (LiClO₄). The prepared samples were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electrochemical discharge–charge cycling in lithium battery. SEM images reveal the nanorods to have dimensions on the order of 1–3 μm in length and 10–50 nm in diameter. The measured initial discharge capacity of the lithium battery with a cathode made of VO₂ (B) nanorods was 152 mA h/g.     

A novel precursor for synthesis of metallic copper nanocrystals by thermal decomposition approach

[Bis(2-hydroxy-1-naphthaldehydato)copper(II)] complex, as a novel precursor, was employed in thermal decomposition process to synthesize metallic copper nanoparticles using oleylamine (C₁₈H₃₇N) as capping agent. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible (UV-vis) spectroscopy. The synthesized copper nanoparticles have a fcc structure with average size 20-35 nm.     

Synthesis and separation property of flower-like Cd(OH)2 microstructures via a simple solution route

Well-defined flower-like Cd(OH)₂ microstructures have been successfully synthesized via a simple aqueous solution route, using CdCl₂ and NaOH as the reactants, and triethanolamine (TEA) as the modifying agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis spectrometer were used to characterize the products. SEM and TEM images illustrated that the flower-like Cd(OH)₂ bundles consisted of hexagonal nanoplates with thickness of about 50 nm. The adsorption of TEA on (0 0 1) plane of the growing Cd(OH)₂ crystal leads to the flower petals in appearance. Further experiments evidenced that the positively charged Cd(OH)₂ could effectively adsorb or separate the negatively charged dye molecules.     

Preparation of Ultrahigh Molecular Weight Polyethylene/WS2 Composites for Bulletproof Materials and Study on Their Bulletproof Mechanism

Ultrahigh molecular weight polyethylene (UHMWPE)/WS₂ nanoparticle fibers were prepared by adding inorganic fullerene-like (IF) WS₂ nanoparticles treated by a coupling agent to the precursor solution of UHMWPE. The influence of WS₂ nanoparticles on the microstructure and properties of UHMWPE fibers were characterized by the scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and mechanical property measurements. The bulletproof performance of the UHMWPE/WS₂ composite was tested by a bullet-shock test, and the bulletproof mechanism of the UHMWPE/WS₂ composite was preliminarily studied. The results showed that WS₂ nanoparticles could be uniformly dispersed in the UHMWPE fiber. After incorporating of WS₂ nanoparticles, the UHMWPE fibers became stiffer and tougher than the pristine ones. In particular, the modulus of the fibers increased from 1203 to 1326 cN/dtex. The introduction of IF-WS₂ nanoparticles led to significantly improved bulletproof performance of UHMWPE fibers.     

Synthesis, characterization and effect of calcination temperature on phase transformation and photocatalytic activity of Cu,S-codoped TiO2 nanoparticles

A novel copper and sulfur codoped TiO₂ photocatalyst was synthesized by modified sol-gel method using titanium(IV) isopropoxide, CuCl₂·2H₂O and thiourea as precursors. The samples were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), scanning electron microscopy equipped with energy dispersive X-ray micro-analysis (SEM-EDX), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) analysis. The XRD results showed undoped and Cu,S-codoped TiO₂ nanoparticles only include anatase phase. Effect of calcination temperature showed rutile phase appears in 650 and 700 °C for undoped and 0.1% Cu,S-codoped TiO₂, respectively. The SEM analysis revealed the doping of Cu and S does not leave any change in morphology of the catalyst surface. The increase of copper doping enhanced “red-shift” in the UV-vis absorption spectra. The TEM images confirmed the dopants suppressed the growth of TiO₂ grains. The photocatalytic activity of samples was tested for degradation of methyl orange (MO) solutions. The results showed photocatalytic activity of the catalysts with 0.05% Cu,0.05% S and 0.1% Cu,0.05% S were higher than that of other catalysts under ultraviolet (UV) and visible irradiation, respectively. Because of synergetic effect of S and Cu, the Cu,S-codoped TiO₂ catalyst has higher activity than undoped and Cu or S doped TiO₂ catalysts.     

Synthesis of fluorinated TiO2 hollow microspheres and their photocatalytic activity under visible light

Fluorinated TiO₂ hollow microspheres with three-dimensional hierarchical architecture were prepared by solvothermally treatment using solid microspheres as precursor. The obtained solid and hollow TiO₂ microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activity of as-prepared solid and hollow TiO₂ microspheres was determined by degradation of methyl orange (MO) under visible light irradiation. The results showed that the surface fluorination, the existence of accessible mesopores channels, and the increased light harvesting abilities could remarkably improve the photocatalytic activity of TiO₂ hollow microspheres.