Investigation of structures of mono- and diorgano-substituted oligosiloxanes containing transition metal atoms

Oligomeric linear copper-containing diorganosiloxanes with a variable Cu : Si ratio and branched Cu- and Ni-containing organosiloxanes containing the γ-aminopropyl group at the Si atom were investigated. IR spectroscopic studies demonstrated that the distribution of metal atoms throughout the metallosiloxane chain in compounds with a high metal content (M : Si≥2) is rather uniform. According to the data from electronic spectroscopy, compounds under study are complexes of metal ions characterized by d-d transitions and an octahedral configuration of the coordination units. The Cu^II and Ni^II ions are coordinated by the NH₂ groups primarily through interchain interactions. ESR spectroscopic studies demonstrated that the Cu^II ions are located predominantly in the main chain to form −O−Cu−O− fragments. The coordination polyhedron changes from a nearly planar square (in the solid phase) to an elongated tetragonal bipyramid (in solution). The spectral parameters of the Cu-containing oligomer containing the γ-aminopropyl group at the Si atom indicate that the N atoms of the amino groups are located in the equatorial plane of the Cu-containing coordination polyhedron. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1813–1817, October, 2000.     

Theoretical study of group 11 metal–silonyl complexes: M–SiO and M–(SiO)2 (M = Cu, Ag, or Au)

 The spectroscopic properties of M–SiO and M–(SiO)₂ (1–1 and 1–2 complexes with M = Cu, Ag, or Au) have been theoretically studied. It has been shown that both M–SiO and M–(SiO)₂ compounds in their ground state are bent with a metal–Si bonded structure. The calculated M(ns) spin density agrees well with the electron spin resonance experimental data. From a topological analysis, it has been shown that a rather large charge transfer occurs from the metal towards the SiO moiety, and that the M–Si bond energy correlates with the electron density located at the M–Si bond path (bond critical point). Received: 6 July 2000 / Accepted: 11 October 2000 / Published online: 19 January 2001     

Structural features of catalytically active oligoorganometallosiloxanes

Copper- and (copper, aluminum)-containing organosiloxanes were studied by spectroscopic methods. It was found that in organometallosiloxanes (OMS) with an increased content of copper (Si/Cu=1 ∶ 1) Cu atoms are rather uniformly distributed in the siloxane matrix. All compounds under study are complexes characterized byd-d-transitions in copper ions with a constant coordination number of the metal atom. The intensity of thed-d-transition band increases as the copper content increases. ESR studies demonstrated that in the compounds under consideration, a change from mononuclear paramegnetic centers to clusters, in which copper ions are linked by strong spin-exchange interactions, occurs as the copper content increases. The catalytic activity of the above-mentioned compounds in isomerization reactions of 3,4-dichlorobutene-1 was studied. It was found that copper atoms serve as catalytic centers. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1946–1949, October, 1998.     

Synthesis and crystal and molecular structures of six-coordinate tin dibromides and diiodides containing lactamomethyl C,O-chelating ligands

New (O−Sn)-bischelate bis(lactamomethyl)dibromo- and-diiodostannanes [L⁽ⁿ⁾]₂SnX₂ (L is the bidentate lactamomethyl C,O-chelating ligand;n is the size of the lactam ring, 5–7; X=Br or I) were prepared both by the direct method from metallic tin and the correspondingN-(halomethyl)lactams and by the reactions of dichlorides [L⁽ⁿ )]₂SnCl₂ with lithium halides. According to the data of X-ray diffraction analysis, the tin atom in [L⁽ⁿ⁾]₂SnBr₂ (n=5–7) and [L⁽ⁿ⁾]₂SnI₂ (n=5 or 6) adopts an octahedral configuration with the carbon atoms intrans positions and the coordinating oxygen and halogen atoms incis-positions with respect to each other. A comparison with the structures of analogous lactamomethyl halide derivatives of five-and six-coordinate Si, Ge, and Sn demonstrates that the spatial structures of the hypervalent fragments containing six-coordinate atoms are less sensitive to the replacement of the halide ligands and the central atom. The covalence of the M−Hal bond increases and the covalence of the M−O bond decreases in the series M=Si, Ge, and Sn. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1988–1998, October, 1999.     

Electronic structure, geometry, and reactivity of arylsilenes: a quantum-chemical study

The geometry and electronic structure of 1,4-di(silaethen-1-yl)benzene (2), itsmeta- andbrtho-isomers (3 and4, respectively), and its carbon analog, 1,4-divinylbenzene (5), were studied by the semiempirical MNDO-PM3 method. Unlike5, two pairs of the frontier MOs in isomers2–4 are mainly π-orbitals of Si=C bonds, while the structure of the lowest occupied π-MO indicates delocalization of π-electrons of the entire system. The main characteristic features of the double Si=C bonds (the high polarity and narrow HOMO-LUMO energy gap, which favors the [2+2]-cycloaddition reaction) remain in arylsilenes2–4. The interaction between π-electrons of benzene fragment and the double Si=C bonds results in violation of the benzene ring symmetry, which is most pronounced in structure5. Weakening of the C−H bonds in theortho-positions of the aromatic nucleus in the compounds under study is observed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 256–260, February, 1999.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Summary. Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

Structure of (O→Si)-(acetoxymethyl)trifluorosilane in three phase states and in solutions

According to the IR spectroscopy data, the molecules of (O→Si)-(acetoxymethyl)trifluorosilane having in the liquid state and in polar media the intramolecular bond C=O→Si, exist in the gas phase in the temperature range 438–538 K in the equilibrium with the molecules with tetracoordinate silicon atom. This allowed to determine experimentally the enthalpy of formation of the intramolecular bond C=O→Si for the gas phase to be ΔH = 2.2±0.1 kcal mol⁻¹. In the solid state at 110 K and in the CS₂ solution, along with molecule with the C=O→Si bond, the dimers exist, which include both tetra- and pentacoordinate silicon atom. The data of quantum-chemical calculations (B3LYP/6-311G**) show that the shortest intermolecular bond Si-F→Si is realized in the associate formed by the molecules in the ap,sp- and sp,sp-forms, and the longest one, when both components are in the sp,sp-forms.     

Non-alkane behavior of cyclopropane and its derivatives: characterization of unconventional hydrogen bond interactions

Eight cyclopropane derivatives (Δ − R) have been modeled, with R = −H, −CH₃, −NH₂, −C ≡ CH, −C ≡ CCH₃, −OH, −F and −C ≡ N. All geometries have been fully optimized at the MP2/ AUG-cc-pVTZ level of calculations. Natural bond orbital analyses reveal extra p character (sp^λ, λ > 3) in the C-C bonds of the cyclopropyl rings. The banana-like σ _CC bonds in the rings are described in detail. Alkene-like complexes between Δ − R molecules and hydrogen fluoride are identified. These weakly bonded complexes are formed through unconventional hydrogen bond interactions between the hydrogen atom in the HF molecule and the carbon–carbon bonds in the cyclopropane ring. A topological analysis of the electronic charge density and its Laplacian has been used to characterize the interactions. The possible relevance of such complexes in the modeling of substrate–receptor interactions in some anti-AIDS drugs is discussed. Contribution to the Serafin Fraga Memorial Issue.     

Generation and capture of alkylchlorosilanones

Alkyltrichlorosilanes react with DMSO (molar ratio 1 : 1 0 °C) to give cyclic oligoalkylchlorosiloxanes of the general formula [R(Cl)SiO] _n (where R=Me or Et;n=3–6). With an excess of alkyltrichlorosilane (2: 1), linear oligoalkylchlorosiloxanes Cl[R(Cl)SiO] _m SiCl₂R (where R=Me or Et;m=1–5) are also formed. In the presence of hexamethyldisiloxane (molar ratio Cl₃SiR : DMSO: (Me₃Si)₂O=1:1:2, 20 °C), the reaction products are both cyclic and linear oligoalkyl(trimethylsilyloxy)siloxanes [R(Me₃SiO)SiO] _n (n=3–5) and Me₃Si[OSi(OSiMe₃)R] _m OSiMe₃ (m=1–3), respectively. The reaction of DMSO with trichloro(vinyl)silane and hexamethyldisiloxane occurs in a similar manner. A plausible scheme of formation of the final products via intermediate alkylchlorosilanones RClSi=O and alkyl(trimethylsilyloxy)silanones is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 361–364, February, 2000.     

Crystal Structure and Characterisation of Mercury(II) Dichromate(VI)

Summary. Dark-red single crystals of HgCr₂O₇ were grown by reacting HgO and CrO₃ in excess at 200°C for four days. The crystal structure (space group P3₂, Z = 3, a = 7.2389(10), c = 9.461(2) ?, 1363 structure factors, 57 parameters, R[F ²>2σ(F ²)] = 0.0369, wR(F ² all) = 0.0693) was determined from a crystal twinned by merohedry according to (110). It consists of nearly linear HgO₂ units ( (Hg–O) = 2.02 ?) and dichromate units that are linked into infinite chains ‘O₃Cr–O–CrO₃–Hg–O₃Cr–O–CrO₃’ running parallel to the c-axis. Six additional Hg–O contacts between 2.73 and 2.96 ? stabilise the structural arrangement. The dichromate anion exhibits a staggered conformation with a bent Cr–O–Cr bridging angle of 140.7(6)°. Upon heating above 300°C, HgCr₂O₇ decomposes in a two-step mechanism to Cr₂O₃. The title compound was additionally characterised by vibrational spectroscopy.     

Carbofunctional fluorine-containing triethoxysilanes: synthesis,film forming and properties

Novel fluorine-containing carbofunctional organosilicon monomers were synthesized: 3-pentafluorobenzylideneaminopropylethoxysilane (EtO)₃Si(CH₂)₃N=CH-C₆F₅, N-3-methoxydiethoxysilylpropyltrifluoroacetamide (EtO)₂(MeO)Si(CH₂)₃NHC(O)CF₃, and 1,1,5-trihydrooctafluoroamyl N-3-triethoxysilylpropylaminopropanoate (EtO)₃Si(CH₂)₃NH(CH₂)₂C(O)OCH₂(CF₂)₃CHF₂. Compositions for the formation of transparent thermally stable films were prepared from these monomers. The films have low absorbance intensity near 1550 nm, i.e., in the region of photosignal transmission of modern optical communication systems. The compositions can dissolve complexes with organofluorine ligands and produce transparent homogeneous films doped with rare-earth metals. The concentrations of the complexes in the matrices are 3.7–21.4 wt.% (metal concentrations are 0.6–3.7%). Fluorescence and fluorescence excitation spectra of the matrices and electronic absorption spectra of the doped films were studied. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1131–1138, May, 2005.     

Reactions of diazoalkanes with unsaturated compounds 15. Catalytic reactions of unsaturated carbonyl compounds and their derivatives with diazomethane

The present study concerned with the influence of the nature of the acetal fragment in unsaturated compounds on the reactivity of the C=C bond in cyclopropanation reactions with diazomethane catalyzed by copper and palladium compounds. The acetal substituents at the α- or γ-position with respect to the C=C bond were found to exert an activating effect on the yields of cyclopropanation products compared to the starting unsaturated carbonyl compounds, which give 1,3-dipolar cycloaddition adducts with CH₂N₂ as by-products. Cyclopropanation of the double bonds appeared to be most efficiently catalyzed by Pd(acac)₂. Dedicated to Corresponding Member of the Russian Academy of Sciences E. P. Serebryakov on the occasion of his 70th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 979–983, April, 2005.     

Molecular Structure and Conformational Composition of 1-[(Methylthio)methyl]-2-nitrobenzene (MTMNB): A Theoretical and Experimental Study

The conformational composition of gaseous MTMNB and the molecular structures of the rotational forms have been studied by electron diffraction at 130^∘C aided by results from ab initio and density functional theory calculations. The conformational potential energy surface has been investigated by using the B3LYP/6-31G(d,p) method. As a result, six minimum-energy conformers have been identified. Geometries of all conformers were optimized using MP2/6-31G(d,p), B3LYP/6-31G(d,p), and B3LYP/cc-pVTZ methods. These calculations resulted in accurate geometries, relative energies, and harmonic vibrational frequencies for all conformers. The B3LYP/cc-pVTZ energies were then used to calculate the Boltzmann distribution of conformers. The best fit of the electron diffraction data to calculated values was obtained for the six conformer model, in agreement with the theoretical predictions. Average parameter values (r_a in angstroms, angle α in degrees, and estimated total errors given in parentheses) weighted for the mixture of six conformers are r(C–C) = 1.507(5), r(C–C)_{ring, av} = 1.397(3), r(C–S)_av = 1.814(4), r(C–N) = 1.495(4), r(N–O)_av = 1.223(3), ∠(C–C–C)_ring = 116.0–122.5, ∠ C6–C4–C7 = 118.2(4), ∠ C–C–S = 113.6(6), ∠ C–S–C = 98.5(12), ∠ N–C–C4 = 121.9(3), ∠(O–N–C)_av = 116.8(3), ∠ O–N–O = 127.0(4). Torsional angles could not be refined. Theoretical B3LYP/cc-pVTZ torsional angles for the rotation about C–N bond, φ_C−N, were found to be 30.5–36.5^∘ for different conformers. As to internal rotation about C–C and C–S bonds, values of φ_C−C = 68–118^∘ and φ_C−S = 66–71^∘ were obtained for the three most stable conformers with gauche orientation with respect to these bonds. Some conclusions of this work were presented in a short communication in Russ. J. Phys. Chem. 2005, 79, 1701.     

Diamond-like carbon films for polyethylene femoral parts: Raman and FT-IR spectroscopy before and after incubation in simulated body liquid

In artificial prosthetics for knee, hip, finger or shoulder joints, ultrahigh molecular weight polyethylene (UHMW-PE) is a significant material. Several attempts to reduce the wear rate of UHMW-PE, i.e. the application of suitable coatings, are in progress. A surface modification of polyethylene with wear-resistant hydrogenated diamond-like carbon is favourable, owing to the chemical similarity of polyethylene (–C–H₂–) _n and C:H or amorphous C:H (a–C:H) coatings with diamond-like properties. In the present study, the microstructure of a–C:H coatings on UHMW-PE substrates was investigated by Raman and Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectroscopy shows very broad absorption lines, which point to the disorder and diversity of different symmetric, asymmetric aromatic, olefin sp ²-hybridized or sp ³-hybridized C–H groups in the amorphous diamond-like carbon coating. Following a long incubation of 12 months in a simulated body liquid, the structural investigations were repeated. Furthermore, fractured cross-sections and the wetting behaviour with polar liquids were examined. After incubation in simulated body liquid, Raman spectroscopy pointed to a reduction of the C–H bonds in the diamond-like carbon coatings. On the basis of these findings, one can conclude that hydrogenated diamond-like carbon is able to interact with salt solutions by substituting the hydrogen with appropriate ions.     

Synthesis,characterization, and non-isothermal curing kinetics of two silicon-containing arylacetylenic monomers

Vinyltri(phenylethynyl)silane ((ph–C≡C)₃–Si–C=CH₂; VTPES) and phenyltri(phenylethynyl)silane ((ph–C≡C)₃–Si–ph; PTPES) were synthesized by Grignard reaction. Their molecular structures were characterized by means of ¹H NMR, ¹³C NMR, ²⁹Si NMR, and FT-IR spectroscopy. Their nonisothermal thermal curing processes were characterized by DSC, and the corresponding kinetic data, for example activation energy (E), pre-exponential factor (A), and the order of the reaction (n), were obtained by the Kissinger method. The results showed that the melting points of VTPES and PTPES were 84 and 116 °C, respectively. Their curing reaction rates were consistent with first-order kinetic equations. VTPES monomer had a lower activation energy and curing temperature as a result of coordination between reactive groups.     

Effect of substituents at the heteroatom on the structure and ligating properties of carbodicarbenes and its silicon analogs: a theoretical study

Density functional calculations have been carried out to investigate the effect of substituents attached to the heteroatoms of N-heterocyclic carbenes (NHCs) on the structure and ligating properties of carbon(0) [C(NHC)₂] and silicon(0) [Si(NHC)₂] compounds. The substituents were found to have a profound role on the structure and ligating properties of these classes of compounds. Fluoro- and chloro-substituted carbon(0) compounds were found to have quasi-linear geometries in which their C(0) characteristics are “masked.” However, their C(0) characteristics become prominent in their protonated species. Large negative charges and shallow bending potential of the central C_c–C₀–C_c angle provide evidence for the “hidden C(0) characteristics” of these two compounds. Electron withdrawing substituents at N-atoms of the two NHCs dramatically decreases the basicity of these compounds. Both natural bonding and atoms in molecules analysis suggest that the most favorable Lewis structure of C(NHC)₂ and Si(NHC)₂ in their equilibrium geometries should be described (portrayed) as L=C=L and L → Si ← L, respectively, where L = NHCs.     

Synthesis of new cyclolinear permethyloligosilane-siloxanes

α,ω-Bis(heptamethylcyclotetrasiloxanyloxy)oligodimethylsilanes were synthesized for the first time by heterofunctional condensation of hydroxyheptamethylcyclotetrasiloxane with α,ω-dichloropermethyloligosilanes, Cl(Me₂Si) _n Cl (n=2, 4, or 6). The compounds obtained were characterized by spectroscopic methods. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 544–545, March, 1998.     

The strength and length of donor-acceptor bonds in molecular complexes

Numerous published data on the structure and thermodynamics of formation of molecular complexes are analyzed. The enthalpies of complexation (−ΔH) are related to the characteristic parameter Δr = [r _DA−a ₁(r _D+r _A)], where r _DA is the donor-acceptor bond length determined by microwave spectroscopy and X-ray analysis, r _D and r _A are the tabulated values of the homopolar covalent radii of the heteroatoms that form the donor-acceptor bond, and a ₁ is an empirical coefficient equal to 0.901±0.007. The relation between −ΔH and Δr values has the form −ΔH = a ₂/Δr (a ₂ = 21.6±1.6 kJ Å mol⁻¹), with a mean relative error of approximation of about 15% and a correlation coefficient of 0.97. As the strength of the complex increases, the donor-acceptor bond length approaches the sum of the heteropolar covalent radii of the atoms involved in the bond (Δr tends to zero). At Δr ≫ 1, the strength of complexes is determined by weak van der Waals interactions between the complex components and the −ΔH values tend to zero. Dedicated to the memory of E. N. Guryanova (1911–2004), a prominent scientist who formulated the basic principles elaborated by her disciples in this review. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1869–1878, October, 2007.     

Ab initio study on the mechanism of cycloaddition reaction between H<Subscript>2</Subscript>Si=Si: and formaldehyde

The mechanism of the cycloaddition reaction between singlet H₂Si=Si: and formaldehyde has been investigated with the CCSD(T)//MP2/6-31G* method. From the potential energy profile, it could be predicted that the reaction has three competitive dominant reaction pathways. The reaction rules presented is that the 3p unoccupied orbital of the Si: atom in H₂Si=Si: inserts the π orbital of formaldehyde from the oxygen side, resulting in the formation of an intermediate. Isomerization of the intermediate further generates a four-membered ring silylene (the H₂Si–O in the opposite position). In addition, the [2+2] cycloaddition reaction of the two π-bonds in H₂Si=Si: and formaldehyde also generates another four-membered ring silylene (the H₂Si–O in the syn-position). Because of the unsaturated property of the Si: atom in the two four-membered ring silylenes, the two four-membered ring silylenes could further react with formaldehyde, generating two silicic bis-heterocyclic compounds. Simultaneously, the ring strain of the four-membered ring silylene (the H₂Si–O in the syn-position) makes it isomerize to a twisted four-membered ring product.     

Dielectric and optical properties of BaTiO<Subscript>3</Subscript> thin films prepared by low-temperature process

Barium titanate (BaTiO₃) thin films have been prepared by low temperature processing on Pt/Ti/SiO₂/Si substrates using sol-gel-hydrothermal (SGHT) technique, which combined the conventional sol-gel process and hydrothermal method. X-ray diffraction analysis showed that the barium titanate thin films are polycrystalline. As-reacted barium titanate films grown on Pt(111)/Ti/SiO₂/Si(100) substrates had a dielectric constant (ε) and loss tangent (tanδ) of 80 and 0.05 at 1 MHz, respectively. The optical constants including refractive index n, extinction coefficient k, and absorption coefficient α of the barium titanate thin films in the wavelength range of 2.5–12.6 μm were obtained by infrared spectroscopic ellipsometry.