Enhanced mechanical and shape memory properties of polyurethane block copolymers chain-extended by ethylene diamine

Effect on shape memory and mechanical properties of polyurethane (PU) copolymers by changing the chain extender from 1,4-butanediol (BD) to ethylenediamine (ED) was investigated. PU copolymers composed of the different ratio of hard and soft segment were prepared and characterized by IR, DSC, XRD, and UTM. Glass transition temperature of PU increased to room temperature range by adopting ED as a chain extender. The XRD peak pattern changed with hard segment content. ED type PU achieved the high mechanical properties at lower hard segment content than BD type PU. Especially, strain at break of ED type significantly improved compared to BD type. Shape recovery rates were similar for both types of PU, but ED type showed better shape retention rate than BD type. The reason for the differences between two types of PU is discussed in this paper.     

Shape memory polyurethanes based on recycled polyvinyl butyral. I. Synthesis and morphology

Shape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect.     

Effect of polyester zigzag structure on the phase segregation of polyester-based polyurethanes

Polyester-based polyurethanes were synthesized from 4,4′-methylenebis(phenyl isocyanate) (MDI) with butanediol as a chain extender and low molecular weight polyester–diol as a soft segment. Two polyesters were used in the synthesis of polyurethanes. One of the polyesters was synthesized from adipic acid and 1,6-hexanediol, which had an even number of carbon atoms. The other polyester was synthesized from pimelic acid and 1,5-pentanediol, which had an odd number of carbon atoms. The effect of even carbon monomers and odd carbon monomers of polyester soft segments on the phase segregation of soft and hard segments was studied by DSC (differential scanning calorimetry) and FTIR (Fourier transform infrared spectroscopy). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2095–2104, 1999     

阻燃型聚乳酸基聚氨酯的合成与表征

以聚乳酸二醇、六次甲基二异氰酸酯和二溴新戊二醇设计合成出一系列阻燃型聚乳酸基聚氨酯。 通过核磁、凝胶色谱和红外等表征了材料的结构性能。 结果表明,二溴新戊二醇作为扩链剂可满足制备高相对分子质量聚氨酯的要求,材料的热学性能随聚乳酸二醇相对分子质量和硬段质量分数的增加而增加。 同时该类聚氨酯具有较好的力学性能,拉伸强度在50 MPa附近,接近工业级别的聚乳酸。 材料的阻燃性能随着溴质量分数的增加而增强。 当溴质量分数为8.6%,聚氨酯的极限氧指数(LOI)为28,属于难燃级别材料。     

Effect of soft segment length on the thermal behaviors of fluorinated polyurethanes

Differential scanning calorimetry (DSC) and temperature modulated DSC (MDSC) have been applied to investigate the thermal behaviors of fluorinated polyurethanes (FPU), which were obtained using 2,2,3,3-tetrafluoro-1, 4-butanediol as the chain extender and based on various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400 and 2000. An exothermic peak and/or multiple melting endotherms were observed during the heating to melting temperature of soft and hard segments. Attributed to the simultaneous recrystallization and melting processes during heating, these features have been confirmed via MDSC, where an endotherm and an exotherm were noted in reversing and non-reversing components of the heat flow. Separating the non-reversing components from the reversing curves, the dependencies of polyurethane morphology on the length of the soft segment could be clarified using MDSC analysis. Soft segment lengthening significantly influences the morphology of soft segment domains in FPUs. The phase separation and crystallinity of the soft segment increased with its length. However, soft segment length exerted a minor influence on the dissociation temperature of the short-range ordered hard segment domain and on the melting temperature of hard segment crystals. Examination of the heats of melting based on the quasi-isothermal MDSC experiments indicated that the crystallinity of hard segment domains declined with increasing soft segment length.     

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Thermomechanical properties of polyurethanes (PUs) strongly depend on the molecular interactions and microphase structure.In this work,two chain extenders with different ratios,flexile 1,4-butanediol (BDO) and branched trimethylolpropane mono allyl ether (TMPAE),are used to tune the molecular interactions and microphase structures of a series of biodegradable thermoplastic polyurethanes (TPUs).In TPUs,the biodegradable polycaprolactone (PCL,Mn of 2000) is used as soft segment while 1,6-diisocyanatohexane (HDI) and chain extenders are used as hard segment.Fourier transform infrared spectroscopy (FTIR),proton nuclear magnetic resonance spectroscppy (1H-NMR),gel permeation chromatography (GPC),differential scanning calorimetry (DSC),dynamic mechanical analysis (DMA) and mechanical tests were performed to characterize the bulk structure and properties of TPUs.Compared with BDO,the steric bulk of TMPAE is larger.The increment of TMPAE can help to increase the hydrogen bond content,microphase separation,and the elastic modulus ratio (R),which would strongly affect the thermomechanical property of the TPUs.The results of this work verify the importance of the structure of chain extender on the properties of TPUs.It provides valuable information for further understanding the structure-property relationships of these polyurethanes.     

Structure-property relationships in polycaprolactone-polyurethanes

The structure-property relationships of polycaprolactone-based segmented polyurethanes were studied using differential scanning calorimetry (DSC), small-angle x-ray scattering (SAXS), wide-angle x-ray diffraction (WAXD), dynamic mechanical, and stress-strain testing. The materials studied varied in hard-segment type [4,4′-diphenylmethane diisocyanate/butanediol (MDI/BD) or 4,4′-dicyclohexyl methane diisocyanate/butanediol (H₁₂MDI/BD)], soft-segment molecular weight (830 or 2000 MW polycaprolactone), hard-segment content (23–77% by weight), and thermal history. The materials with aromatic (MDI/BD) hard segments had semicrystalline hard-segment domains, while the materials with aliphatic (H₁₂MDI/BD) hard segment had mostly amorphous domains. Materials with the shorter polycaprolactone soft segment (830 MW) exhibited thermal and mechanical behavior which indicated a considerable degree of hard- and soft-segment compatibility. The materials which contained a 2000-MW polycaprolactone soft segment exhibited better-defined microphase separation. SAXS was used to characterize the microphase structure of each system. The effects of hard-segment content and soft-segment molecular weight were similar for the aromatic (MDI) and aliphatic (H₁₂MDI) hard-segment-based block copolymers. Changing the hard segment from aromatic to aliphatic gave materials with larger interfacial area and slightly higher tensile strength. A range of morphologies between isolated hard domains in a rubbery matrix and isolated rubbery domains in a hard matrix was observed.     

Effect of Soft Segment Molecular Weight and 3-Methyl Side Group on Microstructural Separation in Polyurethane Elastomers

Abstract

The object of this study was to assess the effect of the chain length and of the pendant 3-methyl side group in the soft segment of polyurethane (PU) elastomers. In addition, the effect of annealing-quenching on the degree of microstructural segregation between the hard and soft segments was also investigated. The study employed electron spin resonance (ESR), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). Samples for ESR measurements were spin-labeled with the nitroxide probe, 4-hydroxy-2,2′,6,6′-piperidine-1-oxyl (TEMPOL), by reaction of an isocyanate group with the hydroxyl group of TEMPOL. The nitroxide label is therefore located at a chain end. The PU's were based on 4,4′-diphenylmethane diisocyanate (MDI), poly(oxytetramethylene) glycols (PTMO), and hydroxyl-terminated random copolymers of tetrahydrofuran and 3-methyl-tetrahydrofuran (THF/Me-THF). Purified 1,4-butanediol (BD) was used as a chain extender. The elastomers made from higher molecular weight (MW) soft segments have better phase segregation than their lower MW counterparts. The 3-methyl side groups on the PTMO backbone have some effect on the arrangements of the two domains. ESR analysis indicated that the increase in the MW of THF/Me-THF decreased the degree of mixing between the hard and soft segments. In PU elastomers made from high MW soft segments, the presence of crystallinity was observed from the DSC measurements. The crystallinity of the soft segments was disrupted by the existence of the 3-methyl side groups.     

Motional heterogeneity and phase separation of functionalized polyester polyurethanes

The polyester polyurethanes, PU based on isophoronediisocyanate, polycaprolactone, and 1,4-butanediol with different amounts of functional groups introduced into the hard segments via second chain extender, 2,2′-bis-(hydroxymethyl) propionic acid, were investigated by electron spin resonance, ESR, spin label method, wide-angle X-ray diffraction, WAXD, optical microscopy and differential scanning calorimetry, DSC. The objective of this study is to clarify the effect of functional groups on the motional heterogeneity, microphase separation and crystallisation of the polyurethanes. The concentration of carboxylic groups varied from 0 to 0.45 mmol g⁻¹. The temperature-dependent ESR spectra of spin labelled PU hard segments chain ends with stable nitroxide radical 2,2,6,6-tetramethyl-4-aminopiperidin-1-yloxyl are sensitive to the amount of functional groups attached to the hard segments. Composite ESR spectra of functionalized PU, with fast and slow component, suggest that PU hard segments are partitioned in two motionally different environments. According to the ratio of fast and slow component motional heterogeneity increases with an increase of functional groups up to 0.35 mmol g⁻¹ and above this concentration slow component decreases indicating higher degree of phase mixing and stronger effect of soft segments. Polarized micrographs and the extent of ordering from WAXD measurements reveal the changes of phase morphology with the carboxylic groups content in a similar way as shown from the motional behaviour of spin label on the segmental level. The degree of crystallinity and the separation of spherulitic rings are decreasing above a certain concentration of functional groups. The effect of functional groups in PU on the hard and soft segment mixing is discussed in terms of additional noncovalent interactions and chain structure which at critical level of interactions lead to a formation of more open hard segment structure accessible to interaction with the soft segment.     

Synthesis and characterization of polydimethylsiloxane polyurea-urethanes and related zwitterionomers

A series of segmented polyurea urethane and polyurea block copolymers based on a hexane diisocyanate (HDI) modified aminopropyl terminated polydimethylsiloxane soft segment was synthesized. The hard segments consisted of 4,4′-methylene diphenylene diisocyanate (MDI) which was chain extended with 1,4-butanediol (BD), N-methyldiethanolamine (MDEA), or ethylene diamine. Zwitterionomers were prepared by quaternizing the tertiary amine of the MDEA extended material with γ-propane sultone. The effect of chemical structure on the extent of phase separation and physical properties was studied using a variety of techniques including thermal analysis, dynamic mechanical spectroscopy, tensile testing, and small-angle x-ray scattering. It was observed that the compatibility between the nonpolar polydimethylsiloxane soft segments and the polar urethane hard segments was improved by inserting HDI linkages into the polydimethylsiloxane soft segments. The aggregation of hard segments was enhanced by increasing hard-segment content or by the introduction of ionic functionality. The tensile strength and modulus of these materials was higher than those of polyurethanes containing soft segments based on polydimethylsiloxane and its derivatives.     

Morphology of polyurethanes with triol monomer crosslinked on hard segments

Polyester‐based polyurethanes containing ≈60 wt % of polyester were synthesized from low molecular weight polyester (M_n ≈2000) and 4,4′‐methylene bis(phenyl isocyanate) (MDI), with butanediol as a chain extender and glycerol as a crosslinker. The triol crosslinker was used in substitution for the 1,4‐butanediol chain extender; thus, the crosslinker was chemical bonded to the hard segments of polyurethane. The morphologies of these polyurethanes were studied by differential scanning calorimetry (DSC), small‐angle X‐ray scattering (SAXS), TMA (thermal mechanical analysis), and FTIR (Fourier transform infrared spectroscopy). Owing to the highly steric hindrance, the presence of triol crosslinker in the hard segments resulted in a decrease in the aggregation of hard segments through hydrogen bonding. The experimental results revealed that the degree of phase segregation of soft and hard segments decreased with increasing the triol crosslinker content in the hard segments. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2673–2681, 1999     

Effect of soft segment length on properties of fluorinated polyurethanes

The effects of soft segment length on the variations in morphology, surface composition, and hydrophilicity have been studied in fluorinated polyurethanes (FPUs) and correlated with their preliminary blood compatibility as evidenced by in vitro platelet adhesion experiments. The fluorinated polyurethanes were obtained using hexamethylene diisocyanate (HDI) and chain extender of 2,2,3,3-tetrafluoro-1,4-butanediol (TF) as the hard segment as well as various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400, and 2000. The increased phase separation in hard-segment domains with lengthening soft segment was observed by FT-IR, which is believed to result in enhanced strength of hydrogen bonds and good hard-segment order arrangement. Thin-film XRD results indicate at least three lateral distances existing between adjacent hard segments in the crystallized hard segment. Their distribution depends strongly on the length of soft segment. Lengthening soft segment promotes the formation of dense arrangement of crystallized hard segments. Compared with the effect of phase separation, surface composition was found to exert a major influence on the preliminary blood compatibility of fluorinated polyurethanes. Increasing fluorine content by decreasing soft segment length promotes reduction in platelet adhesion and activation on polyurethane surfaces.     

不同软段结构的双离子型聚氨酯离聚体

本文讨论了以聚环氧乙烷(PEO)、聚环氧丙烷(PPO)以及聚丁二烯(PBD)为软段,以4,4’-二异氰酸二苯甲烷(MDI)和N,N-二羟乙基甲胺(MDEA)为硬段的链段型聚氨酯的合成。并通过MDEA中的第三胺与Υ-丙磺内酯反应,转化为双离子型离聚体。用差示扫描量热、红外光谱、动态力学性能以及应力-应变等实验方法研究了化学组成和氨磺化程度对材料相分离程度,力学性能和形态结构的影响。结果表明,离子化后的材料力学性能有很大的改善。对PBD为软段的材料,离子化只能提高硬段“微区”的内聚能,而对PEO、PPO为软段的材料,还能大大提高软、硬相的相分离程度。     

A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?

Thermoplastic polyurethane elastomers (TPUs) with a biodegradable chain extender and different nonaromatic diisocyanate hard segments were synthesized and tested concerning their thermal, mechanical, and degradation properties and for their processability regarding electrospinning. The design of the TPUs was based on the structural modification of the hard segment using linear aliphatic hexamethylene diisocyanate (HMDI), more rigid alicyclic 4,4′-methylene bis(cyclohexylisocyanate) (H12MDI), 1,3-bis(isocyanatomethyl)cyclohexane (BIMC), or isophorone diisocyanate (IPDI). The soft segment consisted of poly(tetrahydrofuran). Bis(2-hydroxyethyl) terephthalate (BET) was used as chain extender with cleavable ester bonds. Some of the polyurethanes based on alicyclic diisocyanate showed better mechanical performance than the less rigid HMDI-based TPU. The TPU in vitro degradability was tested for 25 days at elevated temperatures in PBS buffer and indicated a bulk erosion process. Electrospinning experiments were conducted and promising results with respect to further applicability of these materials in vascular tissue engineering were obtained. © 2018 The Authors Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2214–2224     

Quantitative DSC evaluation of phase segregation rate in linear segmented polyurethanes and polyurethaneureas

Linearly segmented polyurethanes and polyurethaneureas are known to be phase separated; one phase is the soft phase, the other, the hard domain. Quantitative evaluation of the degree of phase separation was obtained by DSC. An estimation of the dispersed soft segments outside the soft phase can be made by ΔC_p measurements and the increase in glass transition (T_g) can be attributed to the presence of hard blocks in the soft phase. The segregation rate depends on the nature of the soft segments which decrease from hydrogenated polybutadiene to polybutadiene to polyether. It also depends on the nature of the chain extender from aliphatic to aromatic diol and from aliphatic to aromatic diamine. The presence of soft segments in hard domains can be related to the thermoplastic behavior of the polyurethanes and polyurethaneureas.     

Mechanical and dielectric properties of segmented polyurethane elastomers containing chemical crosslinks in the hard segment

Mechanical and dielectric properties of two series of segmented polyurethanes having soft segment concentration of 50 and 70% and a varying degree of crosslinking through the hard segment were studied. The degree of crosslinking in each series was varied by varying the butane diol/trimethylol propane ratio in the chain extender mixture. Tensile strength, elongation at break decrease, but elastic recovery increases monotonically with increasing crosslinking. The plateau modulus in the dynamic mechanical test decreases and then increases with increasing TMP content. Crosslinking causes broadening of the soft segment glass transition as seen by permittivity and loss factor measurements. It also affects high temperature behavior (above the glass transition of the hard segment); it lowers permittivity, loss factor, and ionic conductivity. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 237–251, 1998     

Thioether functional chain extender for thermoplastic polyurethanes

In this study, a novel three functional chain extender(TATATRIOL) was synthesized from the reaction of 1,3,5-tri(prop-2-en-1-yl)-1,3,5-triazinane-2,4,6-trione(TATA) with 2-sulfanylethanol. Then new thermoplastic polyurethanes(TPUs) were synthesized by a one-step bulk polymerization from the reaction of 1,1'-methanediylbis(4-isocyanatocyclohexane)(H12MDI), a poly(ethylene adipate) based polyester polyol and a chain extender. Butane-1,4-diol(BD) and the newly synthesized monomer, TATATRIOL, were used as chain extenders. The effects of TATATRIOL on the properties of the TPU were investigated and compared to those of the TPU prepared with BD. The TPUs which derived from the sulfur containing chain extender displayed lower modulus and high elongation at break values than the analogous TPUs derived from BD. Moreover sulfur containing TPUs exhibited higher thermal stability.     

Waterborne anionic polyurethanes and poly(urethane-urea)s: influence of the chain extender on mechanical and adhesive properties

Polyurethane and poly(urethane-urea) aqueous dispersions based on 4,4′-dicyclohexylmethane diisocyanate (H₁₂MDI), poly(propylene glycol) (PPG) and dimethylolpropionic acid (DMPA) were synthesized. Three types of chain extenders were used, hydrazine (HYD) and ethylenediamine (EDA), producing poly(urethane-urea)s and ethylene glycol (EG), polyurethanes. The dispersion was performed before or after the chain extension reaction, depending on the extender employed. The dispersions were prepared with and without the addition of acetone after the prepolymer synthesis and neutralization steps. The length of soft segment and NCO/OH ratio were varied. Some mechanical properties of cast films obtained from the aqueous dispersions, the characteristics of coating application on a wood surface and their adhesive properties were evaluated.     

聚环氧氯丙烷氨酯阻尼材料的阻尼性能研究

<正> 一般来讲,聚合物材料的阻尼性能来源于分子链运动带来的内摩擦力以及分子间物理键的破坏与再生,分子链运动所产生的阻尼在聚合物的玻璃化转变温度范围内最为有效。因此具有极性较强、体积较大的一CH_2Cl侧基的环氧氯丙烷聚合物应具有优异的阻尼性能,专利文献[1—2]报道过由多羟基(官能度≥2)聚环氧氯丙烷预聚物为原料制得的聚氨酯泡沫具有良好的阻燃性能,作者在聚环氧氯丙烷氨酯阻尼材料方面进行了尝试。     

Synthesis and properties of polycyanoethylmethylsiloxane polyurea urethane elastomers: A study of segmental compatibility

A series of polyurea urethane block polymers based on either aminopropyl-terminated polycyanoethylmethylsiloxane (PCEMS) soft segments or soft segment blends of PCEMS and polytetramethylene oxide (PTMO) were synthesized. The hard segments consisted of 4,4′-methylenediphenylene diisocyanate (MDI) chain-extended with 1,4-butanediol. The hard segment content varied from 11 to 36%, whereas the PTMO weight fraction in the soft segment blends varied from 0.1 to 0.9. The cyanoethyl side group concentration was also varied during the synthesis of the PCEMS oligomer. The morphology and properties of these polymers were studied by differential scanning calorimetry, infrared spectroscopy, dynamic mechanical and tensile testing, and small-angle x-ray scattering. These materials exhibited microphase separation of the hard and soft segments; however, attaching polar cyanoethyl side groups along the apolar siloxane chains promoted phase mixing in comparison with polydimethylsiloxane-based polyurethanes. The increased phase mixing is postulated to lead to improved interfacial adhesion and thus can account for the observed improvement in ultimate tensile properties compared with polydimethylsiloxane-based polyurethanes. Both hard segment content and cyanoethyl concentration are important factors governing the morphological and tensile properties of these polymers.