Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.     

Functionalization of one or two methyl groups in the [Cp*<Subscript>2</Subscript>RuBr]<Superscript>+</Superscript>Br<Superscript>−</Superscript> complex in the reaction with bromine

The reaction of [Cp*₂RuBr]⁺Br⁻ with bromine in CH₂Cl₂ (CD₂Cl₂) in an inert atmosphere at room temperature produces the complexes [Cp*Ru(Br)C₅Me₄CH₂Br]⁺Br₃ ⁻ (syn conformer), [Cp*Ru(Br)C₅Me₃(CH₂Br)₂]⁺ (syn and anti conformers), and [Ru(Br)(C₅Me₄CH₂Br)₂]⁺ (syn conformer). All complexes were characterized by ¹H and ¹³C NMR spectroscopy; the former complex, by elemental analysis. These complexes were also prepared by the reaction of [Cp*RuC₅Me₄CH₂]⁺BF₄ ⁻ with bromine in CH₂Cl₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2712–2718, December, 2005.     

Electrochemical properties of <Emphasis Type="Italic">n</Emphasis>-sulfonatothiacalyx[4]arene complexes with Fe<Superscript>3+</Superscript> and [Co(dipy)<Subscript>3</Subscript>]<Superscript>3+</Superscript> ions

The electrochemical properties of n-sulfonatothiacalyx[4]arene (H₄XNa₄) complexes with [Co(dipy)₃]³⁺ and Fe³⁺ ions were studied by means of cyclic voltammetry in aqueous solution at pH 2.5. The observed single-electron reduction of [Co(dipy)₃]³⁺ bound extraspherically to the upper rim and Fe³⁺ ion bound intraspherically to the lower rim of n-sulfonatothiacalyx[4]arene in binary [Co(dipy)₃]³⁺ · H₃X^5?, H₃X^5? · Fe³⁺, and ternary [Co(dipy)₃]³⁺ · H₃X^5? · Fe³⁺ heterometal complexes was more difficult than in the free state. The reversible single-electron transfer to the metal ion results in lower binding energy ([Co(dipy)₃]³⁺, ΔΔG ₀ = 3.9 kJ/mol) or in full fast dissociation of the complex (Fe³⁺). The ternary complex in the solution forms the aggregates, in which inner encapsulated Fe(III) and Co(III) ions are not reduced on the electrode. Their quantitative reduction takes place by the relay mechanism of intra- and intermolecular electron transfer through electrochemically generated [Co(dipy)₃]²⁺ outer ions.     

Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.     

Synthesis of Schiff bases and benzylamino derivatives containing [1-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NH<Subscript>3</Subscript>]<Superscript>−</Superscript> anion

Reactions of an amino derivative of the closo-decaborate anion [1-B₁₀H₉NH₃]^– with aromatic aldehydes afforded Schiff bases [1-B₁₀H₉NH=CHAr]^– (Ar=Ph, C₆H₄-2-OMe, or C₆H₄-4-NHCOMe). The reduction of the latter with sodium borohydride gave the corresponding benzylamino derivatives [1-B₁₀H₉NH₂CH₂Ar]^–.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2004–2007, September, 2004.     

Theoretical study on the reaction mechanism of the OH-initiated oxidation of CH<Subscript>2</Subscript>=C(CH<Subscript>3</Subscript>)CH<Subscript>2</Subscript>CH<Subscript>2</Subscript>OH

In the present work, the detailed reaction mechanism and possible products of the OH-initiated oxidation of CH₂=C(CH₃)CH₂CH₂OH (MBO331) have been revealed theoretically for the first time. The potential energy surfaces of various reaction channels both in the absence and presence of O₂ and NO are evaluated at the CCSD(T)/6−31++G(d,p)//MP2(full)/6−311G(d,p)+ZPE*0.95 level. The major products of HCHO + CH₃C(O)CH₂CH₂OH predicted for the title reaction in the presence of O₂ and NO are in agreement with those of similar reactions of unsaturated alcohols with OH radical.     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Ionic mobility in ammonium-rubidium heptafluorozirconate (NH<Subscript>4</Subscript>)<Subscript>2.4</Subscript>Rb<Subscript>0.6</Subscript>ZrF<Subscript>7</Subscript> by (<Superscript>1</Superscript>H, <Superscript>19</Superscript>F) NMR data

NMR (¹⁹F, ¹H) methods are used to study ionic mobility in heptafluorozirconate (NH₄)_2.4Rb_0.6ZrF₇ in a range of temperatures from 150 K to 430 K. Types of ionic movements are determined, and their activation energy is evaluated. As a result of a phase transition a modification forms in which diffusion in the ammonium sublattice and isotropic reorientations of ZrF ₇ ^3? complex anions are observed. According to preliminary data, due to diffusion of ammonium ions the compound has relatively high ionic conductivity (σ ≈ 8.3 × 10^?5 S/cm at 423 K).     

Structures and mutual transformations of isomers of germylium ions (CH<Subscript>3</Subscript>)H<Subscript>2</Subscript>Ge<Superscript>+</Superscript> and (CH<Subscript>3</Subscript>)<Subscript>2</Subscript>HGe<Superscript>+</Superscript> and their silicon analogs

The potential energy surfaces of the (CH₃)_nH_3?n M⁺ ions, where n = 1, 2; M = Si, Ge, were scanned using the B3LYP method with 6–31G* and aug-cc-pVDZ basis sets. The major attention was given to isomeric species having the form of complexes of the HM⁺ and CH₃M⁺ ions with hydrogen, methane, and ethane molecules. These species were characterized previously neither by experimental nor by theoretical methods. It was found that these species become more stable in going from Si to Ge; the complex [CH₃Ge⁺CH₄] is the second isomer in the energy after (CH₃)₂HGe⁺. However, the heights of the activation barriers to formation of these complexes from the most stable isomer, though decreasing in going from Si to Ge, remain relatively high and, what is particularly important, somewhat exceed the activation barrier to formation of the complex [H₃Ge⁺·C₂H₄].     

Theoretical study on the reaction mechanism of (CH3)3CO+CO

The reaction mechanism of (CH₃)₃CO with CO has been theoretically investigated using density-functional theory (DFT) calculations at B3LYP/6-31G* level. In order to get more reliable energy values the single-point energy is evaluated at CCSD (T)/6-31++G** level. The results show that the reaction is multi-channel and the reaction of (CH₃)₃CO radical with CO mostly produces (CH₃)₃C + CO₂. The reaction could play a role in eliminating air pollution.     

A new phosphor with flower-like structure and luminescent properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> long afterglow materials by sol–gel method

The flower-like phosphors of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with high brightness and long afterglow were obtained by sol–gel method. X-ray diffraction pattern (XRD) shows that single-phased Sr₂MgSi₂O₇ phosphor is prepared by sol–gel method under 1250 °C. Scanning electron microscope (SEM) indicates that the phosphor consists of nano-sized whiskers which are detected for the first time in Eu²⁺ and Dy³⁺ co-doped long-lasting phosphorescence silicates. Furthermore, the investigation on the mechanism indicates that the internal structure and gas, liquid and solid phase effect play important roles in the formation of flower-like Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ nanostructure. Finally, the optical properties of flower-like Sr₂MgSi₂O₇ nanostructure have been characterized by photoluminescence (PL) spectra.     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

FTIR-ATR <Emphasis Type="Italic">in situ</Emphasis> observation on the efflorescence and deliquescence processes of Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> aerosols

The efflorescence and deliquescence processes of Mg(NO₃)₂ aerosol particles deposited on ZnSe substrate have been investigated through in situ Fourier transform infrared-attenuated total reflection (FTIR-ATR) technique at the molecular level. At relative humidity (RH) of ∼3%, Mg(NO₃)₂ particles existed as amorphous states. The amorphous Mg(NO₃)₂ particles were transformed into crystalline Mg(NO₃)₂ · nH₂O (n ≤ 5) with slight increasing of RH. Thermodynamically stable Mg(NO₃)₂·6H₂O crystals were gradually formed on the particle surface and started to be dissolved at the saturation point (∼53% RH). At the same time, a continuous phase transition from Mg(NO₃)₂ · nH₂O (n≤5) to Mg(NO₃)₂·6H₂O occurred on the particle surface. This led the solid particles to completely deliquesce at 76% RH, which was much higher than the saturation point of 53% RH. In the efflorescence process, Mg(NO₃)₂ droplets entered into the supersaturated region due to the gradual evaporation of water. Finally, amorphous particles were formed when RH decreased below 5%. In the FTIR-ATR spectra of the supersaturated Mg(NO₃)₂ droplets, the absorbance of the symmetric stretching vibration of NO ₃ ⁻ (v ₁- NO ₃ ⁻ ) clearly became stronger. It resulted from the continuous formation of solvent share ion pairs (SIPs), and even the contact ion pairs (CIPs) between Mg²⁺ and NO ₃ ⁻ . Supported by the Trans-Century Program Foundation for the Talents by the Ministry of Education of China, the National Natural Science Foundation of China (Grant Nos. 20073004, 20473012, and 20673010), the 111 Project (B07012), and the State Key Laboratory of Physical Chemistry for Solid Surface of Xiamen University     

Preparation and Characterization of GdTaO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> Sol-Gel Luminescence Thin Films

High quality GdTaO₄:Eu³⁺ luminescence films have been successfully prepared through a modified sol-gel process. The films were prepared using inorganic materials as raw materials, and the thermal decomposition and UV assisted technique were introduced to improve the quality of the film and reduce the period for forming the thick film. Results of structural studies by atomic force microscopy (AFM) and X-ray diffraction (XRD) showed that the surface was smooth and the structure was monoclinic with the average grain size of about 55 nm. The emission and excitation spectra of the film were investigated. Related to the transition ⁵ D₀ →⁷ F₁ and ⁵ D₀→⁷ F₂ of Eu³⁺ ions, the main luminescence peaks were observed at 591 and 611 nm respectively, and the luminescence peak at 345 nm was detected simultaneously related to the TaO₄³⁻ emission. Transmission spectrum and decay curve of the luminescence are also presented in this paper.     

Structures and bonding of the complexes [M(η<Superscript>5</Superscript>-E<Subscript>5</Subscript>)] and [M(η<Superscript>5</Superscript>-E<Subscript>5</Subscript>)<Subscript>2</Subscript>] (M = Sc,Y, E = N,P): a DFT study

The mono- and bisligands complexes formed by rare earth cation (Sc, Y) with pentazolato anion or cyclo-P₅⁻ anion, the all-nitrogen counterparts of metallocenes or the all-phosphorus counterparts of metallocenes, have been studied at hybrid basis sets level with the DFT method. The geometric parameters, binding energy and the charge distributions of these complexes were characterized. And their stable orders were obtained. Monoligand complexes incline to become bisligands complexes due to their destabilization. The charge transferring between ligand and metallic cation has affinity with the stability of complex. The possibility of forming stable [M(η ⁵-E₅)₂] (M = Sc, Y, E = N, P) complexes is predicted and they are viable synthetic targets theoretically, especially Sc(η ⁵-N₅)₂.     

反式2-甲基-2-丁烯酸甲酯与臭氧反应机理的计算研究

采用G3B3方法构建反式2-甲基-2-丁烯酸甲酯与O3反应体系以及后续Criegee自由基有、无水分子参与下异构化反应的势能面剖面.结果表明,反式2-甲基-2-丁烯酸甲酯与O3反应首先生成一个稳定的五元环中间体,此中间体按断键位置不同后续裂解反应存在两条路径,分别生成产物P1(CH3CHOO+CH3OC(O)C(CH3)O)和P2(CH3CHO+CH3OC(O)C(CH3)OO).利用经典过渡态理论(TST)并结合Wigner矫正模型计算了200-1200 K温度区间内标题反应的速率常数kTST/W.计算结果显示,294 K时,该反应速率常数为7.55×10-18cm3molecule-1s-1,与Bernard等对类似反应所测实验值非常接近.生成的Criegee自由基(CH3CHOO和CH3OC(O)C(CH3)OO)可分别与水分子发生α-加成及β-氢迁移反应,其中Criegee自由基与水的α-加成反应较其与水的β-氢迁移反应具有优势.另外与无水分子参与CH3CHOO和CH3OC(O)C(CH3)OO异构化反应相比,水分子的参与使得异构化反应较为容易进行.     

Theoretical study on the reactions of Zr<Superscript>+</Superscript> and Zr with CO<Subscript>2</Subscript> in gas phase

Density functional theory (DFT) calculations have been performed to explore the potential energy surfaces of C-O bond activation in CO₂ molecule by gas-phase Zr⁺ cation and Zr atom, for better understanding the mechanism of second-row transition metal reacting with CO₂. The minimum energy reaction path is found to involve the spin inversion in the different reaction steps. This potential energy curvecrossing dramatically affects reaction energetics. The present results show that the reaction mechanism is insertion-elimination mechanism along the C-O bond activation. All theoretical results not only support the existing conclusions inferred from early experiment, but also complement the pathway and mechanism for this reaction.     

Dry Potassium-Based Sorbents for CO<Subscript>2</Subscript> Capture

Dry potassium-based sorbents were prepared by impregnation with potassium carbonate on supports such as activated carbon (AC), TiO₂, Al₂O₃, MgO, CaO, SiO₂ and various zeolites. The CO₂ capture capacity and regeneration property of various sorbents were measured in the presence of H₂O in a fixed bed reactor, during multiple cycles at various temperature conditions (CO₂ absorption at 50–100 °C and regeneration at 130–400 °C). The KAlI30, KCaI30, and KMgI30 sorbents formed new structures such as KAl(CO₃)₂(OH)₂, K₂Ca(CO₃)₂, K₂Mg(CO₃)₂, and K₂Mg(CO₃)₂·4(H₂O), which did not completely convert to the original K₂CO₃ phase at temperatures below 200 °C, during the CO₂ absorption process in the presence of 9 vol.% H₂O. In the case of KACI30, KTiI30, and KZrI30, only a KHCO₃ crystal structure was formed during CO₂ absorption. The formation of active species, K₂CO₃·1.5H₂O, by the pretreatment with water vapor and the formation of the KHCO₃ crystal structure after CO₂ absorption are important factors for absorption and regeneration, respectively, even at low temperatures (130–150 °C). In particular, the KTiI30 sorbent showed excellent characteristics with respect to CO₂ absorption and regeneration in that it satisfies the requirements of a large amount of CO₂ absorption (87 mg CO₂/g sorbent) without the pretreatment with water vapor, unlike KACI30, and a fast and complete regeneration at a low temperature condition (1 atm, 150 °C). In addition, the higher total CO₂ capture capacity of KMgI30 (178.6 mg CO₂/g sorbent) than that of the theoretical value (95 mg CO₂/g sorbent) was explained through the contribution of the absorption ability of MgO support. In this review, we introduce the CO₂ capture capacities and regeneration properties of several potassium-based sorbents, the changes in the physical properties of the sorbents before/after CO₂ absorption, and the role of water vapor and its effects on CO₂ absorption.     

Crystal-chemical analysis of the structures of minerals with [Hg<Subscript>2</Subscript>]<Superscript>2+</Superscript> dumbbells

An analysis of the structures of minerals with [Hg₂]²⁺ dumbbells including poyarkovite [Hg₂]₃Cl₂O₂, shakhovite [Hg₂]₂Sb(OH)₃O₃, vasilyevite Hg₂₀O₆I₃Br₂Cl(CO₃), and kelyanite [Hg₂]₆[SbO₆]BrCl₂ was carried out. The determining factor in structure formation is the ordering of the centers of the cluster groups of mercury and large anions by systems of equidistant parallel planes with d _hkl ～ 2.5–4.5 Å. The different combinations of atoms and fragments in the structure are ordered by their own pseudotranslation lattices; this probably reflects the stages of crystallization. The crystal structures under study are examples of balance between the local interatomic interactions and the forces that create long-range order for different stoichiometries, masses, and sizes of components.