Synthesis and Characterization of Metabolites and Potential Impurities of Lansoprazole,an Antiulcerative Drug

Lansoprazole (Prevacid) is an antiulcerative drug used for the treatment of duodenal and gastric ulcers, reflux oesophagitis, and Zollinger–Ellison syndrome. During the bulk synthesis of lansoprazole, we have observed five impurities: lansoprazole N-oxide, lansoprazole sulfone N-oxide, lansoprazole sulfide, lansoprazole sulfone and N-aralkyl lansoprazole. The present work describes the synthesis and characterization of these impurities.     

Synthesis of Metabolites and Related Substances of Rabeprazole,an Anti-Ulcerative Drug

Rabeprazole sodium (Aciphex®) is a gastric proton pump inhibitor used for the prevention and treatment of gastric acid–related diseases. During the synthesis of bulk drug of rabeprazole sodium, we have observed metabolites rabeprazole sulfide and rabeprazole sulfone and related substances rabeprazole-N-oxide, rabeprazole sulfone-N-oxide, N-aralkyl rabeprazole, chloro rabeprazole, and methoxy rabeprazole as impurities in the drug substance. The present work describes the synthesis and characterization of these compounds.     

Synthesis and Spectral Characterization of Related Substances of Vardenafil,an Erectile Dysfunction Drug

Abstract

Vardenafil hydrochloride trihydrate (Levitra) is used to treat erectile dysfunction (ED) and is an inhibitor of phosphodiesterase type 5 (PDE-5) enzyme. It maintains higher levels of cyclic guanosine monophosphate (cGMP), relaxes smooth muscles, promotes penile blood flow, and enhances erectile function. During the bulk drug synthesis of vardenafil hydrochloride trihydrate, six related substances (impurities), vardenafil dimer, vardenafil N-oxide, vardenafil glycene, vardenafil oxopiperazine, vardenafil oxoacetic acid, and phenyl vardenafil were identified, and these are reported herein for the first time. The present work describes the synthesis and characterization of these impurities.     

Identification, Isolation, and Characterization of Five Potential Degradation Impurities in Candesartan Cilexetil Tablets

Five impurities were observed when candesartan cilexetil tablets were subjected to stability and forced degradation studies. These impurities were successfully isolated and characterized as desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil, 2N-ethyl candesartan cilexetil, 1N-ethyl oxo candesartan cilexetil, and 2N-ethyl oxo candesartan cilexetil. A gradient reverse phase liquid chromatography (LC) and an isocratic preparative LC method were used to detect and isolate all five degradation products impurities simultaneously. Mass spectrometry, ¹H/¹³C, DEPT and 2D NMR experiments were extensively utilized to characterize these impurities. Even though desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil were 2N-ethyl candesartan cilexetil were documented in the literature as known impurities, the regioisomers 1N-ethyl oxo candesartan cilexetil and 2N-ethyl oxo candesartan cilexetil were never noticed. Single-crystal diffraction data has been used to confirm their structure unambiguously and synthetic preparations of all known and unknown impurities were also presented.     

N-Amino-1,8-Naphthalimide is a Regenerated Protecting Group for Selective Synthesis of Mono-N-Substituted Hydrazines and Hydrazides

A new route to synthesis of various mono-N-substituted hydrazines and hydrazides by involving in a new C−N bond formation by using N-amino-1,8-naphthalimide as a regenerated precursor was invented. Aniline and phenylhydrazines are reproduced upon reacting these individually with 1,8-naphthalic anhydride followed by hydrazinolysis. The practicality and simplicity of this C−N dihalo alkanes; developed a synthon for bond formation protocol was exemplified to various hydrazines and hydrazides. N-amino-1,8-naphthalimide is suitable synthon for transformation for selective formation of mono-substituted hydrazine and hydrazide derivatives. Those are selective mono - amidation of hydrazine with acid halides; mono-N-substituted hydrazones from aldehydes; synthesis of N-aminoazacycloalkanes from acetohydrazide scaffold and inserted to hydroxy derivatives; distinct synthesis of N,N-dibenzylhydrazines and N-benzylhydrazines from benzyl halides; synthesis of N-amino-amino acids from α-halo esters. Ecofriendly reagent N-amino-1,8-naphthalimide was regenerated with good yields by the hydrazinolysis in all procedures.     

Synthesis of potential impurities of dabigatran etexilate

The present work describes the origin, control, and synthesis of two potent impurities of dabigatran etexilate 1, dabigatran dimer 2, and dabigatran n-propyl ester 3 from the commercially available raw materials 2-[(4-cyanophenyl)amino]acetic acid (4) and N-[3-amino-4-(methylamino)benzoyl]-N-2-pyridinyl-β-alanine ethyl ester (5). These impurities are the process-related impurities and may affect the quality of drug substance, during its manufacturing in large scale. These impurities are not only the crucial components in determining the quality and safety of the drug substance 1 but also provide a better understanding of impurity profiling.     

Chemometrics‐assisted chromatographic fingerprinting: An illicit methamphetamine case study

The volatile chemical constituents in complex mixtures can be analyzed using gas chromatography with mass spectrometry. This analysis allows the tentative identification of diverse impurities of an illicit methamphetamine sample. The acquired two‐dimensional data of liquid–liquid extraction was resolved by multivariate curve resolution alternating curve resolution to elucidate the embedded peaks effectively. This is the first report on the application of a curve resolution approach for chromatogram fingerprinting to identify particularly the embedded impurities of a drug of abuse. Indeed, the strong and broad peak of methamphetamine makes identifying the underlying peaks problematic and even impossible. Mathematical separation instead of conventional chromatographic approaches was performed in a way that trace components embedded in methamphetamine peak were successfully resolved. Comprehensive analysis of the chromatogram, using multivariate curve resolution, resulted in elution profiles and mass spectra for each pure compound. Impurities such as benzaldehyde, benzyl alcohol, benzene, propenyl methyl ketone, benzyl methyl ketone, amphetamine, N‐benzyl‐2‐methylaziridine, phenethylamine, N ,N ,α‐trimethylamine, phenethylamine, N ,α,α‐trimethylmethamphetamine, N‐acetylmethamphetamine, N‐formylmethamphetamine, and other chemicals were identified. A route‐specific impurity, N‐benzyl‐2‐methylaziridine, indicating a synthesis route based on ephedrine/pseudoephedrine was identified. Moreover, this is the first report on the detection of impurities such as phenethylamine, N ,α,α‐trimethylamine (a structurally related impurity), and clonitazene (as an adulterant) in an illicit methamphetamine sample.     

Synthesis,characterization and control of eight process-related and two genotoxic fingolimod impurities by a validated RP-UPLC method

An HPLC method has been described in the European Pharmacopoeia and United States Pharmacopeia for the determination of nine organic impurities (imp A–I) in fingolimod hydrochloride, a synthetic sphingosine-1-phosphate receptor modulator. The manufacturing process of fingolimod hydrochloride consists of multistep chemical synthesis wherein controls of precursors, intermediates and process steps should be performed to assure the final quality of the drug substance. We synthesized and isolated eight process-related impurities (FINI imp A–H) of fingolimod, which were different from the pharmacopoeial impurities. One unknown process-related impurity was found as a key intermediate (FINI) and was identified by LC–MS. Characterization of all of the impurities were done using spectroscopic techniques (¹H and ¹³C NMR, FTIR, MS), and the mechanistic pathways to the formation of these impurities were also discussed. Two of these impurities were evaluated as potential genotoxic impurities owing to their alerting structures and alkylating properties (alkyl sulfonates and alkyl halides, class 3, ICH M7). We also developed and validated an RP-UPLC method in line with ICH Q2 guidelines for control these impurities (FINI imp A–H) and to assure the pharmacopoeial quality drug substance.     

One‐pot Synthesis of 2,5‐Disubstituted‐1,3,4‐oxadiazoles Based on the Reaction of N,N‐Dimethyl Amides with Acid Hydrazides

Convenient and efficient one pot method for the synthesis of 2,5‐disubstituted‐1,3,4‐oxadiazoles based on the reaction of N,N‐dimethyl amides with acid hydrazides has been developed. The methodology is applied to a wide range of difference aryl hydrazide and difference N,N‐dimethyl amides to 2,5‐disubstituted‐1,3,4‐oxadiazoles yield the in good to excellent yields. It will be possible wide useful application in synthesis.     

Identification,characterization, and high‐performance liquid chromatography quantification of process‐related impurities in vonoprazan fumarate

High‐performance liquid chromatography analysis of vonoprazan fumarate, a novel proton pump inhibitor drug revealed six impurities. These were identified by liquid chromatography with mass spectrometry. Further, the structures of the impurities were confirmed by synthesis followed by characterization by mass spectrometry, NMR spectroscopy, and infrared spectroscopy. On the basis of these data and knowledge of the synthetic scheme of vonoprazan fumarate, the previously unknown impurity was identified as 1‐[5‐(2‐fluorophenyl)‐1‐(pyridin‐3‐ylsulfonyl)‐1H‐pyrrol‐3‐yl]‐N‐methyldimethylamine, which is a new compound. The possible mechanisms by which these impurities were formed were also discussed. A high‐performance liquid chromatography method was optimized in order to separate, selectively detect, and quantify all process‐related impurities of vonoprazan fumarate. The presented method has been validated in terms of linearity, limits of detection, and quantification, and response factors and, therefore, is highly suitable for routine analysis of vonoprazan fumarate related substances as well as stability studies.     

Palladium acetate assisted synthesis of five-membered N-polyheterocycles

Abstract

The metal-assisted synthesis of heterocyclic compounds is known to be one of the extremely developing as well as significant concepts of organic chemistry. Because of their expensive, complex working of the instrument and difficult procedures, the methodologies used earlier for the heterocycle synthesis were less amicable to the researchers. The Pd(OAc)₂-mediated cyclic reactions have been recognized to be very effective for both the stereoselective as well as regioselective formation of the 5-membered N-bearing heterocyclic compounds. The different uses of palladium acetate, as a catalyst in the formation of 5-membered N-containing polyheterocycles, are covered in this review article.     

Aqueous solution properties of pH‐responsive AB diblock acrylamido–styrenic copolymers synthesized via aqueous reversible addition–fragmentation chain transfer

Here we report the synthesis and solution characterization of a novel series of AB diblock copolymers with neutral, water‐soluble A blocks consisting of N,N‐dimethylacrylamide and pH‐responsive B blocks of N,N‐dimethylvinylbenzylamine. To our knowledge, this represents the first example of an acrylamido–styrenic block copolymer prepared directly in a homogeneous aqueous solution. The best blocking order [with poly(N,N‐dimethylacrylamide) as a macro‐chain‐transfer agent] yielded well‐defined block copolymers with minimal homopolymer impurities. The reversible aggregation of these block copolymers in aqueous media was studied with ¹H NMR spectroscopy and dynamic light scattering. Finally, an example of core‐crosslinked micelles was demonstrated by the addition of a difunctional crosslinking agent to a micellar solution of the parent block copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1724–1734, 2004     

Separation and Characterization of Unknown Impurities in Amikacin Sulfate by HPLC–MS n

Nine impurities in amikacin sulfate made in China were separated and identified by HPLC–MSⁿ for the further improvement of official monographs in pharmacopoeias. The mass fragmentation patterns and structural assignment of these impurities were studied. The column was Acchrom Click XIon (250 × 4.6 mm, 5 μm). The mobile phase was 250 m mol L⁻¹ ammonium formate and 1.4 % formic acid aqueous solution–acetonitrile–water (30:48:22). In positive mode, full scan LC–MS was first performed in order to obtain the m/z value of the protonated molecules, LC–MS–MS was then carried out on the compounds of interest on AB SCIEX 4000 Q TRAP™ composite triple quadrupole/linear ion trap tandem mass spectrometer. The complete fragmentation patterns of nine impurities were studied and used to obtain information about the structure of these impurities. The structures of nine impurities in amikacin sulfate were deduced based on the HPLC–MSⁿ data, in which three impurities were novel impurities. Three novel impurities were 1-N-(l-4-amino-2-hydroxybutyryl) derivative of 4-O-(6-AG)DS, 1-N-(l-4-amino-2-hydroxybutyryl) derivative of 6-O-(3-AG)DS and 1-N-(l-4-amino-2-hydroxybutyryl) derivative of kanamycin D.

     

Synthesis of Conformationally Restricted Carbocyclic Nucleosides: The Role of the O(4′)-Atom in the Key Hydration Step of Adenosine Deaminase

Conformationally restricted carbocyclic nucleosides with either a northern(N)-type conformation, i.e., N-type 2′-deoxy-methanocarba-adenosine 8 ((N)MCdAdo), or a southern(S)-type conformation, i.e. S-type 2′-deoxy-methanocarba-adenosine 9 , ((S)MCdAdo), were used as substrates for adenosine deaminase (ADA) to assess the enzyme's preference for a fixed conformation relative to the flexible conformation represented by the carbocyclic nucleoside aristeromycin ( 10 ). Further comparison between the rates of deamination of these compounds with those of the two natural substrates adenosine (Ado; 1 ) and 2′-deoxyadenosine (dAdo; 2 ), as well as with that of the conformationally locked nucleoside LNA-Ado ( 11 ), which, like the natural substrates, has a furanose O(4′) atom, helped differentiate between the roles of the O(4′) anomeric effect and sugar conformation in controlling the rates of deamination by ADA. Differences in rates of deamination as large as 10000 can be attributed to the combined effect of the O(4′) atom and the enzyme's preference for an N-type conformation. The hypothesis proposed is that ADA's preference for N-type substrates is not arbitrary; it is rather the direct consequence of the conformationally dependent O(4′) anomeric effect, which is more efficient in N-type conformers in promoting the formation of a covalent hydrate at the active site of the enzyme. The formation of a covalent hydrate at the active site of ADA precedes deamination. A new and efficient synthesis of the important carbobicyclic template 14a , a useful intermediate for the synthesis of (N)MCdAdo ( 8 ) and other conformationally restricted nucleosides, is also reported.     

Development of a practical and scalable synthesis of anti-HBV drug Y101

The process research and development of a practical and scalable synthetic method towards Anti-HBV Drug N-[N-benzoyl-O-(2-dimethylaminoethyl)-l-tyrosyl]-l-phenylalaninol (Y101) was described. Initial synthetic routes of Y101 in milligram quantities were unsuitable for large-scale synthesis to provide bulk material. As part of the collaboration between Medicinal Chemistry and Research active pharmaceutical ingredient (API), a fit for purpose route for the kilo scale synthesis of Y101 was developed. In contrast, the improved route described here did not require purification by column chromatography for all steps, and the formation of impurities was effectively suppressed. This highly efficient and scalable process was successfully demonstrated in the large-scale synthesis of Y101.     

Acylation of Cellulose with N,N′‐Carbonyldiimidazole‐Activated Acids in the Novel Solvent Dimethyl Sulfoxide/Tetrabutylammonium Fluoride

Summary: Carboxylic acids were efficiently activated with N,N′‐carbonyldiimidazole (CDI) and applied for the acylation of cellulose under homogeneous conditions using dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) as solvent. The simple and elegant method is a very mild and easily applicable tool for the synthesis of pure aliphatic, alicyclic, bulky, and unsaturated cellulose esters with degrees of substitution of up to 1.9. Products are soluble in organic solvents, e.g., DMSO or N,N‐dimethylformamide (DMF). The cellulose esters were characterized by elemental analysis, FT‐IR, ¹H and ¹³C NMR spectroscopy and show no impurities or substructures resulting from side reactions.

The esterification of cellulose using carboxylic acids activated in situ with N,N′‐carbonyldiimidazole.     

Direct N−H Activation to Generate Nitrogen Radical for Arylamine Synthesis via Quantum Dots Photocatalysis

Represented herein is the first example of N-radical generation direct from N−H bond activation under mild and redox-neutral conditions. The in situ generated N-radical intercepts a reduced heteroarylnitrile/aryl halide for C−N bond formation under visible-light irradiation of quantum dots (QDs). A series of aryl and alkylamines with heteroarylnitriles/aryl halides exhibit high efficiency, site-selectivity and good functional-group tolerance. Moreover, consecutive C−C and C−N bond formation using benzylamines as substrates is also achieved, producing N-aryl-1,2-diamines with H₂ evolution. The redox-neutral conditions, broad substrate scope, and efficiency of N-radical formation are advantageous for organic synthesis.     

A scheme of the stepwise reaction of diphenylchlorophosphine with <Emphasis Type="Italic">N,N</Emphasis>-dialkylformamides in the presence of NaI

On an example of DMF was proposed and experimentally verified stepwise reaction scheme of the reaction of diphenylchlorophosphine with N,N-dialkylformamides. The first stage is autocatalytic reaction of the synthesis of (diphenylphosphoryl)(N,N-dialkylamino)chloromethanes proceeding through the intermediate formation of diphenyldichloro[(N,N-dialkylamino)chloromethyl]phosphoranes. In the second stage that includes NaI, the (diphenylphosphoryl)(N,N-dialkylamino)chloromethanes are reduced by diphenyliodophosphine (or triphenylphosphine) to form the final N,N-dialkyl(diphenylphosphinomethylene)iminium iodides. One can assume that the reaction of the synthesis of N,N-dialkyl(diphenylphosphinomethylene)-iminium iodides proceeds in a similar way, starting with diphenyliodphosphine.     

A survey of crystal structures and biological activities of platinum group metal complexes containing N-acylthiourea ligands

Abstract

N-Acyl-thioureas are important compounds in the field of organic synthesis and medicinal chemistry. Research interest in these compounds has grown recently because coordination to metal ions enhances their application especially in view of medicinal studies. These thiourea derivatives possess rich coordination chemistry and the coordination behavior of these derivatives alters upon reaction with different metals. Such ligands generally coordinate to Pt(II) and Pd(II) ions in a bidentate S,O manner and often coordinate to Ru(II), Rh(III) and Ir(III) centers through the S donor atom. We isolated some complexes of these ligands by reaction with sodium azide which coordinates to Ru(II), Rh(III), and Ir(III) in a bidentate S,N fashion. The deprotonated thiourea nitrogen atom resulted in the formation of strained 4-membered ring structures around the metal center. Biological application of N-acyl thiourea derivatives and their platinum group metal complexes are further discussed. Studies has shown that these compounds can be used as drugs to treat several human diseases like microbial infections, tuberculosis, carcinomas, malaria, leishmaniasis, urease inhibitors and anti-inflammatory. This review intends to summarize the recent advancement in the chemistry of N-acyl-thioureas and highlight some perspectives in the synthesis, versatile coordination behavior to ruthenium, rhodium, iridium, platinum and palladium, and their metal complexes in biological applications.     

The Structure of N‐phenyl‐pyrazoles and Indazoles: Mononitro,Dinitro, and Trinitro Derivatives

This review explores the heterocyclic family of N‐nitrophenyl pyrazoles and indazoles covering mainly their structural aspects, with special emphasis on the X‐ray diffraction data. NMR spectroscopy and the theoretical calculations will also be briefly summarized. The synthesis and reactivity aspects will be reported when they are specific to these compounds.