Fe3O4@L‐arginine magnetic nanoparticles: A novel and magnetically retrievable catalyst for the synthesis of 1′3‐diaryl‐2N‐azaphenalene

The catalytic activity of l ‐arginine‐coated nano‐Fe₃O₄ particles (Fe₃O₄@l ‐arginine) proves they are a novel magnetic catalyst without the use of heat and reflux for the synthesis of 1,3‐diaryl‐2‐N‐azaphenalene derivatives and n‐acyl‐1,3‐diaryl‐2‐N‐azaphenylene derivatives in a one‐pot pseudo‐five‐component condensation reaction of compounds of 2,7‐naphthalene diol, aldehydes, and ammonia derivatives (ammonium acetate or ammonium hydrogen phosphate) and solvent (water and alcohol) with high yield and short reaction times, economical, and simple workup. The structure and magnetic properties of the obtained nanoparticles were characterized via Fourier transform infrared spectroscopy (IR) and field emission scanning electron microscopy (FE‐SEM). The results demonstrated that the average size of the synthesized magnetite nanoparticles is about 21 nm. In addition, the heterogeneous catalyst can be easily recovered magnetically and can be reused for further runs without significant loss of its catalytic activity.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Fe3O4@SiO2@l‐arginine@Pd(0): a new magnetically retrievable heterogeneous nanocatalyst with high efficiency for C–C bond formation

The surface of Fe₃O₄@SiO₂ nanoparticles was modified using l ‐arginine as a green and available amino acid to trap palladium nanoparticles through a strong interaction between the metal nanoparticles and functional groups of the amino acid. The proposed green synthetic method takes advantage of nontoxic reagents through a simple procedure. Characterization of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) was done using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analysis. The catalytic activity of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) as a new nanocatalyst was investigated in C – C coupling reactions. Waste‐free, use of green medium, efficient synthesis leading to high yield of products, eco‐friendly and economic catalyst, excellent reusability of the nanocatalyst and short reaction time are the main advantages of the method presented. Copyright © 2016 John Wiley & Sons, Ltd.     

Magnetic d‐penicillamine‐functionalized cellulose as a new heterogeneous support for cobalt(II) in green oxidation of ethylbenzene to acetophenone

A new efficient heterogeneous catalyst is introduced for the oxidation of ethylbenzene. The catalyst was obtained in three steps: functionalization of cellulose with d ‐penicillamine, deposition of Fe₃O₄ nanoparticles on cellulose–d ‐penicillamine and then anchoring of Co(II) to the magnetic cellulose–d ‐penicillamine. High yield and excellent selectivity were achieved for the oxidation of ethylbenzene to acetophenone in ethanol under reflux conditions using H₂O₂ as a green oxidant. Also, the recovered catalyst could be applied six times without a decrease in activity.     

l‐Isoleucyl‐l‐serine 0.33‐hydrate,l‐phenyl­alanyl‐l‐serine and l‐methionyl‐l‐serine 0.34‐hydrate

The structures of the title dipeptides, C₉H₁₈N₂O₄·0.33H₂O, C₁₂H₁₆N₂O₄ and C₈H₁₆N₂O₄S·0.34H₂O, complete a series of investigations focused on l ‐Xaa‐l ‐serine peptides, where Xaa is a hydro­phobic residue. All three structures are divided into hydro­philic and hydro­phobic layers. The hydro­philic layers are thin for l ‐phenyl­alanyl‐l ‐serine, rendered possible by an unusual peptide conformation, and thick for l ‐isoleucyl‐l ‐serine and l ‐methionyl‐l ‐serine, which include cocrystallized water mol­ecules on the twofold axes.     

The monohydrates of the four polar dipeptides l‐seryl‐l‐asparagine,l‐seryl‐l‐tyrosine,l‐tryptophanyl‐l‐serine and l‐tyrosyl‐l‐tryptophan

The crystal structures of the four dipeptides l ‐seryl‐l ‐asparagine monohydrate, C₇H₁₃N₃O₅·H₂O, l ‐seryl‐l ‐tyrosine monohydrate, C₁₂H₁₆N₂O₅·H₂O, l ‐tryptophanyl‐l ‐serine monohydrate, C₁₄H₁₇N₃O₄·H₂O, and l ‐tyrosyl‐l ‐tryptophan monohydrate, C₂₀H₂₁N₃O₄·H₂O, are dominated by extensive hydrogen‐bonding networks that include cocrystallized solvent water molecules. Side‐chain conformations are discussed on the basis of previous observations in dipeptides. These four dipeptide structures greatly expand our knowledge on dipeptides incorporating polar residues such as serine, asparagine, threonine, tyrosine and tryptophan.     

N‐(l‐2‐Aminobutyryl)‐l‐alanine and 2‐(l‐alanylamino)‐l‐butyric acid 0.33‐hydrate

The crystal structure of N‐(l ‐2‐amino­butyryl)‐l ‐alanine, C₇H₁₄N₂O₃, is closely related to the structure of l ‐alanyl‐l ‐alanine, both being tetragonal, while the retro‐analogue 2‐(l ‐alanyl­amino)‐l ‐butyric acid 0.33‐hydrate, C₇H₁₄N₂O₃·­0.33H₂O, forms a new type of molecular columnar structure with three peptide mol­ecules in the asymmetric unit.     

Indirect reversed‐phase high‐performance liquid chromatographic and direct thin‐layer chromatographic enantioresolution of (R,S)‐Cinacalcet

Enantioresolution of the calcimimetic drug (R,S)‐Cinacalcet was achieved using both indirect and direct approaches. Six chiral variants of Marfey's reagent having l ‐Ala‐NH₂, l ‐Phe‐NH₂, l ‐Val‐NH₂, l ‐Leu‐NH₂, l ‐Met‐NH₂ and d ‐Phg‐NH₂ as chiral auxiliaries were used as derivatizing reagents under microwave irradiation. Derivatization conditions were optimized. Reversed‐phase high‐performance liquid chromatography was successful using binary mixtures of aqueous trifluoroacetic acid and acetonitrile for separation of diastereomeric pairs with detection at 340 nm. Thin silica gel layers impregnated with optically pure l ‐histidine and l ‐arginine were used for direct resolution of enantiomers. The limit of detection was found to be 60 pmol in HPLC while in TLC it was found to be in the range of 0.26–0.28 µg for each enantiomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Rose Bengal‐Sensitized Photooxidation of the Dipeptides l‐Tryptophyl‐l‐Phenylalanine,l‐Tryptophyl‐l‐Tyrosine and l‐Tryptophyl‐l‐Tryptophan: Kinetics,Mechanism and Photoproducts¶

The Rose Bengal‐sensitized photooxidations of the dipeptides l ‐tryptophyl‐l ‐phenylalanine (Trp‐Phe), l ‐tryptophyl‐l ‐tyrosine (Trp‐Tyr) and l ‐tryptophyl‐l ‐tryptophan (Trp‐Trp) have been studied in pH 7 water solution using static photolysis and time‐resolved methods. Kinetic results indicate that the tryptophan (Trp) moiety interacts with singlet molecular oxygen (O₂(¹Δ_g)) both through chemical reaction and through physical quenching, and that the photooxidations can be compared with those of equimolecular mixtures of the corresponding free amino acids, with minimum, if any, influence of the peptide bond on the chemical reaction. This is not a common behavior in other di‐ and polypeptides of photooxidizable amino acids. The ratio between chemical (k_r) and overall (k_t) rate constants for the interaction O₂(¹Δ_g)‐dipeptide indicates that Trp‐Phe and Trp‐Trp are good candidates to suffer photodynamic action, with k_rlk_t values of 0.72 and 0.60, respectively (0.65 for free Trp). In the case of Trp‐Tyr, a lower k_rlk_t value (0.18) has been found, likely as a result of the high component of physical deactivation of O₂(¹Δ_g) by the tyrosine moiety. The analysis of the photooxidation products shows that the main target for O₂(¹Δ_g) attack is the Trp group and suggests a much lower accumulation of kynurenine‐type products, as compared with free Trp. This is possibly because of the occurrence of another accepted alternative pathway of oxidation that gives rise to 3a‐oxidized hydrogenated pyrrolo[2,3‐b]indoles.     

l‐Phenyl­alanyl‐l‐alanine dihydrate

A new type of molecular arrangement for dipeptides is observed in the crystal structure of l ‐phenyl­alanyl‐l ‐alanine dihydrate, C₁₂H₁₆N₂O₃·2H₂O. Two l ‐Phe and two l ‐Ala side chains aggregate into large hydro­phobic columns within a three‐dimensional hydrogen‐bond network.     

About formation of cycles in Sn(II) octanoate‐catalyzed polymerizations of lactides

At first, formation of cycles in commercial poly(l ‐lactide)s is discussed and compared with benzyl alcohol‐initiated polymerizations performed in this work. This comparison was extended to polymerizations initiated with 4‐cyanophenol and pentafluorothiophenol which yielded cyclic polylactides via end‐biting. The initiator/catalyst ratio and the acidity of the initiator were found to be decisive for the extent of cyclization. Further polymerizations of l ‐lactide were performed with various diphenols as initiators/co‐catalysts. With most diphenols, cyclic polylactides were the main reaction products. Yet, only catechols yielded even‐numbered cycles as main reaction products, a result which proves that their combination with SnOct₂ catalyzed a ring‐expansion polymerization (REP). The influence of temperature, time, co‐catalyst, and catalyst concentrations was studied. Four different transesterification reactions yielding cycles were identified. For the cyclic poly(l ‐lactide)s weight average molecular weights (M_w's) up to 120,000 were obtained, but ¹H NMR end group analyses indicated that the extent of cyclization was slightly below 100%. The influence of various parameters like structure of initiator and catalyst and temperature on the formation of cyclic poly(l ‐lactide)s has been investigated. Depending on the chosen conditions, the course of the polymerization can be varied from a process yielding exclusively linear polylactides to mainly cyclic polylactides. Three different reaction pathways for cyclization reactions have been identified. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1915–1925     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Determination of l‐tryptophan and l‐kynurenine derivatized with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole by LC‐MS/MS on a triazole‐bonded column and their quantification in human serum

The concentrations of l ‐tryptophan (Trp) and the metabolite l ‐kynurenine (KYN) can be used to evaluate the in‐vivo activity of indoleamine 2,3‐dioxygenase (IDO) and tryptophan 2,3‐dioxygenase (TDO). As such, a novel method involving derivatization of l ‐Trp and l ‐KYN with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS) and separation by high‐performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection on a triazole‐bonded column (Cosmosil HILIC®) was developed to determine their concentrations. The optimized mobile phase, CH₃CN/10 mm ammonium formate in H₂O (pH 5.0) (90:10, v/v) eluted isocratically, resulted in satisfactory separation and MS/MS detection of the analytes. The detection limits of l ‐Trp and l ‐KYN were approximately 50 and 4.0 pm , respectively. The column temperature affected the retention behaviour of the Trp and KYN derivatives, with increased column temperatures leading to increased capacity factors; positive enthalpy changes were revealed by van't Hoff plot analyses. Using the proposed LC‐MS/MS method, l ‐Trp and l ‐KYN were successfully determined in 10 μL human serum using 1‐methyl‐l ‐Trp as an internal standard. The precision and recovery of l ‐Trp were in the ranges 2.85–9.29 and 95.8–113%, respectively, while those of l ‐KYN were 2.51–16.0 and 80.8–98.2%, respectively. The proposed LC‐MS/MS method will be useful for evaluating the in vivo activity of IDO or TDO. Copyright © 2016 John Wiley & Sons, Ltd.     

Circularly Polarized Luminescence of Chiral Perylene Diimide Based Enantiomers Triggered by Supramolecular Self‐Assembly

Two perylene diimide (PDI) enantiomers ( d/l ‐PDI ) incorporating the d /l ‐alanine moiety have been designed and synthesized. d/l ‐PDI in chloroform displays bright‐yellow fluorescence that is redshifted to orange‐red when the solvent contains a methanol fraction of 99 vol %. No circular dichroism (CD) or circularly polarized luminescence (CPL) signals were observed for d/l ‐PDI enantiomers in CHCl₃. Interestingly, the d/l ‐PDI enantiomers exhibit clear mirror‐image Cotton effects and CPL emission in the aggregate state. The optical anisotropy factor (g_lum) is as high as 0.02 at f_m=99 %, which can be attributed to self‐assembly through intermolecular π–π interactions in the aggregate state.     

l‐Lysine‐derived ionic liquids as chiral ligands of Zn(II) complexes used in ligand‐exchange CE

Amino acid ionic liquids (AAILs) with l ‐lysine (l ‐Lys) as anion were synthesized and applied as new chiral ligands in Zn(II) complexes for chiral ligand‐exchange CE. After effective optimization, baseline enantioseparation of seven pairs of dansylated amino acids was achieved with a buffer of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM ZnSO₄, and 6.0 mM [C₆mim][l ‐Lys] at pH 8.2. To validate the unique behavior of AAILs, a comparative study between the performance of Zn(II)‐l ‐Lys and Zn(II)‐[C₆mim][l ‐Lys] systems was conducted. In Zn(II)‐[C₆mim][l ‐Lys] system, it has been found that the improved chiral resolution could be obtained and the migration times of the three test samples were markedly prolonged. Then the separation mechanism was further discussed. The role of [C₆mim][l ‐Lys] indicated clearly that the synthesized AAILs could be used as chiral ligands and would have potential utilization in separation science in future.     

Temperature‐tuned enantioselectivity in transfer hydrogenation: preparation and catalytic property of amino acid‐modified benzimidazole

A series of l ‐amino acid‐modified benzimidazoles have been synthesized and their application in Ru‐catalysed asymmetric transfer hydrogenation (ATH) of ketones has been evaluated using i‐propanol as hydrogen donor as well as solvent. The enantioselectivity of the product was sensitive to the reaction conditions and showed reversed temperature effect. Better reaction activity and enantioselectivity were obtained at higher reaction temperature and higher molar ratio of substrate to catalyst (S/C). At an S/C of 2000:1 and 5000:1, the turnover frequency (TOF) and the enantiomeric excess (ee) value of the ATH of acetophenone promoted by the combination of l ‐proline benzimidazole 7c and [RuCl₂(p‐cymene)]₂ were up to 6880, 13 000 h^?1 and 67%, 51% respectively. The ee value dropped off after the reaction reached equilibrium. The high activity and enantioselectivity of [RuCl₂(p‐cymene)]₂/ 7c was primarily influenced by the (S,R) configuration, whereas the (S,S) configuration had low activity and enantioselectivity. Copyright © 2012 John Wiley & Sons, Ltd.     

l‐Methionyl‐l‐alanine: a dipeptide with hexagonal symmetry and Z′ = 7

The crystal structure of l ‐methionyl‐l ‐alanine, C₈H₁₆N₂O₃S, is very similar to that of l ‐valyl‐l ‐alanine [Görbitz & Gundersen (1996). Acta Cryst. C 52 , 1764–1767] and other related dipeptides in space group P6₁, but there are seven mol­ecules in the asymmetric unit. The Z value of 42 is the highest ever observed for a chiral mol­ecule.     

l‐Seryl‐l‐phenyl­alanine

The peptide bond in the crystal structure of the title compound, C₈H₁₆N₂O₄, deviates substantially from planarity in the same manner as in other l ‐Ser‐l ‐Xaa dipeptides, where Xaa is a hydro­phobic residue.     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

A new ‘hydrogen‐bond rule' applied to the structure of l‐seryl‐l‐alanine and pairs of dipeptide retroanalogues

A new `rule' for the association of hydrogen‐bond donors and acceptors in crystal structures is presented. It implies that ranks are assigned to each donor and each acceptor (1 is best, 2 is next best etc.), and that hydrogen bonds should be formed between donors and acceptors in rank order. l ‐Ser‐l ‐Ala, C₆H₁₂N₂O₄, is used together with its retroanalogue, l ‐Ala‐l ‐Ser, and three other pairs of dipeptide retroanalogues to illustrate this rule and the reasons why it may not always be followed.