Direct synthesis of ester-containing indium homoenolate and its application in palladium-catalyzed cross-coupling with aryl halide

An efficient method for the synthesis of ester-containing indium homoenolate via a direct insertion of indium into β-halo ester in the presence of CuI/LiCl was described. The synthetic utility of the indium homoenolate was demonstrated by palladium-catalyzed cross-coupling with aryl halides in DMA with wide functional group compatibility.     

Rapid synthesis of quinoline-4-carboxylic acid derivatives from arylimines and 2-substituted acrylates or acrylamides under indium(III) chloride and microwave activations. Scope and limitations of the reaction

Rapid synthesis of quinoline-4-carboxylic acid derivatives has been achieved by reaction of 2-methoxy acrylates or acrylamides with N-arylbenzaldimines in acetonitrile under InCl3 catalysis and microwave irradiation. Isolated yields up to 57% within 3 min have been obtained. The Lewis acid and the microwave activation appeared as crucial parameters for the reaction. The role of indium chloride and ytterbium triflate was specified using 13C NMR data and model theoretical studies.     

Highly chemoselective reductive amination of carbonyl compounds promoted by InCl3/Et3SiH/MeOH system

A new strategy has been developed for reductive amination of aldehydes and ketones with the InCl3/Et3SiH/MeOH system, which is a nontoxic system with highly chemoselective and nonwater sensitive properties. The methodology can be applied to a variety of cyclic, acyclic, aromatic, and aliphatic amines. Functionalities including ester, hydroxyl, carboxylic acid, and olefin are found to be stable under our conditions. The reaction shows a first-order kinetics profile with respect to both InCl3 and Et3SiH. Spectroscopic techniques such as NMR and ESI-MS have been employed to probe the active and resulting species arising from InCl3 and Et3SiH in MeOH, which are important in deriving a mechanistic proposal. In the ESI-MS studies, we have first discovered the existence of stable methanol-coordinated indium(III) species which are presumably responsible for the gentle generation of indium hydride at room temperature. The solvent attribution was crucial in tuning the reactivity of [In-H] species, leading to the establishment of mild reaction conditions. The system is superior in flexible tuning of hydride reactivity, resulting in the system being highly chemoselective.     

Indium(III) chloride-sodium borohydride system: a convenient radical reagent for an alternative to tributyltin hydride system

The indium hydride generated from NaBH4 and InCl3, is a promising candidate of alternative to Bu3SnH. In particular, the catalytic performance of InCl3 in the dehalogenation of alkyl and aryl halides, intramolecular cyclization and intermolecular coupling reaction are noteworthy.     

Syntheses and structures of zwitterionic indium(III) and di-zinc compounds of an extended nitrogenous ligand. Examples of unusually long wavelength transitions in d10-metal complexes

In acetonitrile, the reaction of hydrated InCl(3) and 2-[(2-(pyridylamino)phenylazo]pyridine [HL] affords an ink-blue octahedral indium(III) complex having the formula [InCl(3)(HL)]. The compound is a zwitterion in which the positive and the negative charges reside on the extended ligand HL. The secondary amine nitrogen in it is deprotonated, while the free pyridyl nitrogen is protonated. The reaction of ZnCl(2), on the other hand, produces a di-metallic complex, [Zn(2)Cl(2)L(2)], where the two metal ions are bridged across the deprotonated ligand [L](-). The color of the di-zinc complex is also ink blue. Interestingly, the UV-vis spectrum of the indium compound is almost identical to that of the di-zinc compound. Long-wavelength transitions near 590 nm in these examples are assigned to intraligand pi-pi transitions.     

Reexamination of CeCl3 and InCl3 as activators in the diastereoselective Mukaiyama aldol reaction in aqueous media

A search for suitable reaction conditions in Mukaiyama-type aldol condensations activated by CeCl(3) and InCl(3) revealed that the reaction proceeds best in i-PrOH/H(2)O (95:5). Contrary to literature precedent, no reaction was observed in pure water, and the encountered destruction of the starting silyl enol ether can be ascribed to initial hydrolysis of the Lewis acid. As anticipated from the dual parameter (pK(h), WERC value) characteristics of CeCl(3) and InCl(3), the former proved more efficient as Lewis acid-promoter, in terms of reaction speed and yield. Nevertheless, InCl(3) was a superior catalyst during evaluation of the diastereoselectivity of the process. In this regard, determination of diastereoselectivity as a function of time showed that the InCl(3)-catalyzed reaction is irreversible, whereas the CeCl(3)-catalyzed reaction is a reversible process. In both cases, formation of the syn product is kinetically preferred, although DeltaDeltaG(++)273K(InCl(3)) = 1.50 kcal/mol versus DeltaDeltaG(++)273K (CeCl(3)) = 0.38 kcal/mol. Molecular modeling (semiempirical PM3, ab initio HF/3-21G*, hybrid B3LYP/3-21G*, and B3LYP/LANL2DZ) of the diastereoselective aldol reaction promoted by InCl(3) supports a "closed", Zimmermann-Traxler transition state.     

Triethylsilane-indium(III) chloride system as a radical reagent

[reaction: see text] A novel generation method of indium hydride (Cl2InH) was found by the transmetalation of InCl3 with Et3SiH. In the intramolecular cyclization of enynes, the previously reported system (NaBH4-InCl3) has a problem of side reactions with the coexistent borane. In contrast, the problem was solved by the presented system, which affords effective hydroindation of alkynes.     

Dihaloindium hydride as a novel reducing agent

Dihaloindium hydrides (X2InH) are novel reducing reagents, which act in both an ionic and a radical manner. The hydrides were easily generated from InX3 and Bu3SnH to reduce a variety of functionalities such as aldehydes, ketones, enones, and imines. The combination of a phosphine and Cl2InH accomplished the selective transformation from acid chlorides to aldehydes. One-pot treatment of Cl2InH, enones, and aldehydes achieved reductive aldol reactions, in which the predominant reduction of enones was followed by an aldol reaction between the resulting indium enolates and the remaining aldehydes. It is noteworthy that both anti- and syn-selective aldols were obtained by the use of THF and an aqueous solvent, respectively. The replacement of Bu3SnH with Et3SiH as a hydride source allowed the catalytic use of InBr3 to give the syn-selective aldols. The dehalogenation of alkyl halides was achieved by a catalytic amount of InCl3 in the presence of Bu3SnH. This procedure was applied to some representative cyclizations as radical proof. A simple and non-toxic system, NaBH4/InCl3, also promoted dehalogenation, intramolecular cyclization, and intermolecular coupling reactions. In addition, the Et3SiH/InCl3 system was found applicable to an effective intramolecular cyclization of enynes.     

In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)): A Metal-Rich Main-Group Cluster with a Distorted Cubane Structure

A distorted In(8) cubane core (see picture) is present in the novel indium cluster In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)), which was synthesized by the reaction of LiC(6)H(3)-2,6-Mes(2) with InCl. It has an average In-In bond length of 2.92 ? and represents a new addition to the range of heavier Group 13 element clusters.     

Direct reduction of alcohols: highly chemoselective reducing system for secondary or tertiary alcohols using chlorodiphenylsilane with a catalytic amount of indium trichloride.

The direct reduction of alcohols using chlorodiphenylsilane as a hydride source in the presence of a catalytic amount of indium trichloride is described. Benzylic alcohols, secondary alcohols, and tertiary alcohols were effectively reduced to give the corresponding alkanes in high yields. A compound bearing both primary and secondary hydroxyl groups was reduced only at the secondary site to afford the primary alcohol after workup with Bu(4)NF. This system showed high chemoselectivity only for the hydroxyl group while not reducing other functional groups that are readily reduced by standard reducing systems. Thus alcohols bearing ester, chloro, bromo, or nitro groups, which are sensitive to LiAlH(4) or Zn/H(+), were selectively reduced only at the hydroxyl sites by the chlorodiphenylsilane/InCl(3) system. NMR studies revealed the reaction course. The hydrodiphenylsilyl ether is initially formed and then, with InCl(3) acting as a Lewis acid, forms an oxonium complex, which accelerates the desiloxylation with donation of the hydrogen to the carbon.     

Reaction of InCl3 with various reducing agents: InCl3-NaBH4-mediated reduction of aromatic and aliphatic nitriles to primary amines

While alternative methods of preparing dichloroindium hydride (HInCl(2)) via the in situ reduction of InCl(3) using lithium amino borohydride (LAB) were explored, generation of HInCl(2) from the reduction of InCl(3) by sodium borohydride (NaBH(4)) was also re-evaluated for comparison. The reductive capability of the InCl(3)/NaBH(4) system was found to be highly dependent on the solvent used. Investigation by (11)B NMR spectroscopic analyses indicated that the reaction of InCl(3) with NaBH(4) in THF generates HInCl(2) along with borane-tetrahydrofuran (BH(3)·THF) in situ. Nitriles underwent reduction to primary amines under optimized conditions at 25 °C using 1 equiv of anhydrous InCl(3) with 3 equiv of NaBH(4) in THF. A variety of aromatic, heteroaromatic, and aliphatic nitriles were reduced to their corresponding primary amine in 70-99% isolated yields. Alkyl halide and nitrile functional groups were reduced in tandem by utilizing the reductive capabilities of both HInCl(2) and BH(3)·THF in a one-pot reaction. Finally, the selective reduction of the carbon bromine bond in the presence of nitriles was achieved by generating HInCl(2) via the reduction InCl(3) with NaBH(4) in CH(3)CN or with lithium dimethylaminoborohydride (MeLAB) in THF.     

Preparation of nanometer-sized In2O3 particles by a reverse microemulsion method

Nanometer-sized indium oxide (In(2)O(3)) particles have been prepared by chemical reaction of inorganic indium compounds and ammonia gas in a reverse microemulsion system consisting of water, Triton X-100 (surfactant), n-heptanol (co-surfactant), and n-octane (oil). Precursor hydroxides precipitated in the droplets of water-in-oil (W/O) microemulsion were calcined at different temperatures to form indium oxide powder. The factors affecting the particle size have been discussed; the calcination temperature is considered to be the important factor for controlling the size. In(2)O(3) calcined at 400 degrees C had a spherical form and a narrow size distribution. Calcination at 800 degrees C led to the formation of particles not only of irregular shape, but also of a wide size distribution. With the increase in calcination temperature from 400 to 800 degrees C, the average size of the particles grew from 7 to about 40 nm. The species of reactants used in the aqueous phase had a significant effect on the size of the particles. The average diameter of In(2)O(3) particles derived from reactant InCl(3) was 7 nm; that of particles derived from In(NO(3))(3) was 15 nm. The In(2)O(3) nanoparticles were characterized by transmission electron microscopy and X-ray diffraction. The phase behavior of the microemulsions is discussed.     

Inter- and intramolecular radical couplings of ene-ynes or halo-alkenes promoted by an InCl3/MeONa/Ph2SiH2 system

[reaction: see text] An effective generation of indium hydride (HInCl(2)) under nonacidic conditions is achieved by transmetalation between Ph(2)SiH(2) and InCl(2)OMe. The presented system achieves the titled coupling reactions in a radical manner. In particular, the nonacidic character enables the applications to acid-sensitive inter- and intramolecular ene-yne couplings.     

Synthesis and structures of a pentanuclear Al(iii) phosphonate cage, an In(iii) phosphonate polymer, and coordination compounds of the corresponding phosphonate ester with GaI(3) and InCl(3)

A cationic, pentanuclear aluminium phosphonate cage, [L(4)Al(5)Cl(6)(THF)(6)]Cl, 1, supported by (phthalimidomethyl) phosphonate, (L), has been synthesized and characterized. This polynuclear cage features the phosphonate ligand in an unusual coordination mode, supporting five aluminium atoms in two different environments. In comparison, the aqueous reaction of LH(2) with In(ClO(4))(3) afforded [{(LH)In(H(2)O)}(H(2)O)(2)(ClO(4))](n), 2, an indium(iii) phosphonate coordination polymer, that has been crystallographically characterized. Reactions of the corresponding phosphonate ester, diethyl (phthalimidomethyl) phosphonate, (L'), with GaI(3) and InCl(3) afforded the simple coordination complexes, [L'·GaI(3)], 3, and [L'·InCl(3)(THF)], 4.     

Mechanism of the transition-metal-catalyzed hydroarylation of bromo-alkynes revisited: hydrogen versus bromine migration

A comprehensive mechanistic study of the InCl(3)-, AuCl-, and PtCl(2)-catalyzed cycloisomerization of the 2-(haloethynyl)biphenyl derivatives of Fürstner et al. was carried out by DFT/M06 calculations to uncover the catalyst-dependent selectivity of the reactions. The results revealed that the 6-endo-dig cyclization is the most favorable pathway in both InCl(3)- and AuCl-catalyzed reactions. When AuCl is used, the 9-bromophenanthrene product could be formed by consecutive 1,2-H/1,2-Br migrations from the Wheland-type intermediate of the 6-endo-dig cyclization. However, in the InCl(3)-catalyzed reactions, the chloride-assisted intermolecular H-migrations between two Wheland-type intermediates are more favorable. These Cl-assisted H-migrations would eventually lead to 10-bromophenanthrene through proto-demetalation of the aryl indium intermediate with HCl. The cause of the poor selectivity of the PtCl(2) catalyst in the experiments by the Fürstner group was predicted. It was found that both the PtCl(2)-catalyzed alkyne-vinylidene rearrangement and the 5-exo-dig cyclization pathways have very close activation energies. Further calculations found the former pathway would lead eventually to both 9- and 10-bromophenanthrene products, as a result of the Cl-assisted H-migrations after the cyclization of the Pt-vinylidene intermediate. Alternatively, the intermediate from the 5-exo-dig cyclization would be transformed into a relatively stable Pt-carbene intermediate irreversibly, which could give rise to the 9-alkylidene fluorene product through a 1,2-H shift with a 28.1 kcal mol(-1) activation barrier. These findings shed new light on the complex product mixtures of the PtCl(2)-catalyzed reaction.     

InCl(3)-catalyzed three-component asymmetric Mannich-type reaction in methanol

[reaction: see text] A one-pot InCl(3)-catalyzed Mannich-type reaction was carried out in methanol. High diastereoselectivities and high yields were obtained. In addition, after the reaction was completed, InCl(3) can be recycled and reused without a drop of activity and selectivity.     

三辛基氧化膦(TOPO)萃取铟的研究

本文研究了三辛基氧化膦(TOPO)自盐酸溶液中萃取铟的性能,其萃取率是随酸度的增加而增加。与P_(350)和TBP相比较,萃取能力大小顺序为:TOPO>P_(350)>TBP经斜率法和化学分析法研究确定,TOPO白盐酸溶液中萃取铟的反应为:In_((a))~(3+)+H_((a))~++4Cl_((a))~-+2TOPO_((o))F(?)HInCl_4·2TOPO_((o))IR和NMR研究证明:铟是以H[InCl_4]形式被萃入TOPO有机相中的。     

Monovalent indium in a sulfur-rich coordination environment: synthesis, structure and reactivity of tris(2-mercapto-1-tert-butylimidazolyl)hydroborato indium, [TmBut]In

[Tm(Bu(t))]In, the first structurally-characterized monovalent indium compound that features a sulfur-rich coordination environment, has been synthesized via treatment of InCl with [Tm(Bu(t))]K; in contrast to the thallium counterpart, the lone pair of [Tm(Bu(t))]In is a site of reactivity, thereby allowing formation of [Tm(Bu(t))]In-->B(C(6)F(5))(3) and [Tm(Bu(t))]In(kappa(2)-S(4)) upon treatment with B(C(6)F(5))(3) and S(8), respectively.     

Highly efficient Pd-catalyzed carbonylative cross-coupling reactions with tetraorganoindates

Tetraorganoindates, which were prepared easily from the reaction of 1 equiv of InCl(3) with 4 equiv of organometallics, could be employed as effective nucleophilic cross-coupling partners in Pd-catalyzed carbonylative cross-coupling reactions with a variety of organic electrophiles. The present method gave unsymmetrical ketones and 1,4-diacylbenzenes in good yields with highly efficient transfer of almost all the organic groups attached to the indium under a carbon monoxide atmosphere in THF at 60 degrees C.     

Electrochemical Study of Indium in a Water‐Stable 1‐Ethyl‐3‐Methylimidazolium Chloride/Tetrafluoroborate Room Temperature Ionic Liquid

The electrochemistry of indium species was investigated at glassy carbon, tungsten and nickel electrodes in a basic 1‐ethyl‐3‐methylimidazolium chloride/tetrafluoroborate ionic liquid. Amperometric titration experiments suggest that In(III) chloride is complexed as [InCl₅]^2? in this ionic liquid. The electrochemical reduction of [InCl₅]^2? to indium metal is preceded by overpotential driven nucleations. The effective anodic dissolution of indium to indium(III) requires, however, the presence of sufficient chloride ions at the electrode surface. The electrodeposition of indium at glassy carbon and tungsten electrodes proceeds via three‐dimensional instantaneous nucleation with diffusion‐controlled growth of the nuclei. At the nickel electrode, the deposition proceeds via three‐dimensional progressive nucleation with diffusion‐controlled growth of the nuclei. Raising the deposition temperature decreases the average radius of the individual nuclei, r. Scanning electron microscopic and x‐ray diffraction data indicated that bulk crystalline indium electrodeposits could be prepared on nickel substrates within a temperature range between 30 and 120 °C.