Synthesis of novel fluorinated 4H-benzo[h]chromen-4-one and 4H-pyrano[3,2-h]quinolin-4-one derivatives

New fluorinated 4H-benzo[h]chromen-4-one and 4H-pyrano[3,2-h]quinolin-4-one derivatives are obtained in moderate to good yields, through a one-pot aldolization-intramolecular S_NAr process, from the tetrakis(dimethylamino)ethylene (TDAE) mediated reductive cleavage of two N,N-dimethylamino-bis-chlorodifluoroacetyl substrates in the presence of heteroaryl aldehydes.     

The first synthesis of dihydro-3H-pyrido[2,3-b][1,4]diazepinols and a new alternative approach for diazepinone analogues

The first synthesis of a series of 2-aryl(heteroaryl)-4-trifluoromethyl-4,5-dihydro-3H-pyrido[2,3-b][1,4]diazepin-4-ols, where aryl = C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-CH₃C₆H₄, 4-OCH₃C₆H₄, 4,4′-biphenyl, 1-naphthyl and heteroaryl = 2-thienyl, 2-furyl obtained from the direct cyclocondensation reaction of 4-methoxy-1,1,1-trifluoroalk-3-en-2-ones with 2,3-diaminopyridine in 54-71% yield, is reported. Another alternative and efficient route for the synthesis of a series of 2-aryl(heteroaryl)-3H-pyrido[2,3-b][1,4]diazepin-4(5H)-ones from the reaction 4-methoxy-1,1,1-trichloroalk-3-en-2-ones with 2,3-diaminopyridine, in 54-70% yield, is also reported.     

Synthesis of heteroaryl ketones via tandem reaction of 1,1-dibromoethenes

A novel method for the synthesis of heteroaryl ketones through one-pot tandem reaction of 1,1-dibromoethenes with 2-amino(thio)phenols promoted by TBAF·3H₂O and RuCl₃(5%)/air was developed. This novel method includes several reactions in one-pot and utilizes economical yet efficient reagents to generate synthetically and biologically interesting heteroaryl ketones under mild conditions with good efficiency.     

An efficient synthesis of 6H,7H-chromeno[4,3-b]chromenes and 6,7-dihydrothio chromeno[3,2-c]chromenes as 9-substituted xanthene like analogs

An efficient synthetic route with good overall yields to access 7-aryl/heteroaryl/alkyl substituted 6H,7H-chromeno[4,3-b]chromene, and 6,7-dihydrothiochromeno[3,2-c]chromene scaffolds has been developed. The route to these xanthene-like analogs involves a three-step reaction sequence: (1) Michael addition of readily available phenol and thiophenol to 4-chloro-2,2-dimethyl-2H-chromene-3-carbaldehyde, (2) Grignard reaction of different aryl, heteroaryl and alkyl magnesium bromides on the resulting carbaldehydes followed by (3) FeCl₃ catalyzed spontaneous intramolecular Friedel-Craft’s reaction on the diarylmethyl carbinols.     

Synthesis of substituted aryl amidines from aminoacetonitriles

Aryl aminoacetonitriles are oxidized by NiO₂-H₂O or MnO₂ in the presence of a wide range of NH₂-containing compounds to afford aryl amidines, presumably via iminium intermediates. A ‘one-pot’ procedure for the preparation of heteroaryl amidines from N-containing heteroaryl halides through a process comprising sequential S_NAr substitution and oxidation has also been developed.     

Silica chloride (SiO2-Cl) catalyzed one pot synthesis of 2,3-disubstituted-thiazolidin-4-one

Abstract

In this paper, we report one-pot, three-component cyclo condensation of an aldehyde, an amine and thioglycolic acid to form 2,3-disubstituted-thiazolidin-4-one by using supported protic acid (Silica Chloride: SiO₂-Cl) catalyst. The catalyst SiO₂-Cl is compatible with a variety of aldehydes (aryl/heteroaryl) and the aromatic amines affording 2,3-disubstituted-thiazolidin-4-one analogs in 72–89% yields. Moreover, the supported catalyst was recycled several times without significant loss of catalytical activity     

Reductive carbonylation of aryl and heteroaryl iodides using Pd(acac)2/dppm as an efficient catalyst

Palladium catalyzed simple and efficient protocol for reductive carbonylation of aryl and heteroaryl compounds has been developed. The formylation of aryl and heteroaryl iodides takes place in the presence of Pd(acac)₂/dppm catalyst at 10 bar pressure of synthetic gas to give the desired aromatic and heteroaromatic aldehydes in good to excellent yields. Easy work-up, stability of the catalyst, low catalyst loading and less reaction time are the advantages of this method.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Solvent-free Brønsted acid catalysed alkylation of arenes and heteroarenes with benzylic alcohols

A simple and efficient alkylation of aromatic and heteroaromatic compounds via the direct S_N1-type nucleophilic substitution of benzylic alcohols in the presence of catalytic amounts of the strong Brønsted acid o-benzenedisulfonimide under neat conditions is herein reported. A library of di- and triaryl (and heteroaryl) methanes was prepared in good yields and high regioselectivity. The observed reactivity was shown to be in agreement with Mayr's nucleophilicity and electrophilicity scales.     

Synthesis of 3‐Heteroaryl‐Substituted Tetrahydrofurans from the Baylis–Hillman Adducts of Heteroarylaldehydes by n‐Bu3SnH‐Mediated 5‐exo‐trig Vinyl Radical Cyclization

The synthesis of 3‐heteroaryl‐substituted tetrahydrofurans from the propargyl derivative of Baylis–Hillman adducts of heteroaryl aldehydes by n‐Bu₃SnH‐mediated 5‐exo‐trig vinyl radical cyclization in high yield is reported.     

Structure Study of Bi2.5Na0.5Ta2O9 and Bi2.5Nam−1.5NbmO3m+3 (m=2-4) by Neutron Powder Diffraction and Electron Microscopy

The crystal structures of Bi_2.5Na_0.5Ta₂O₉ and Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=3,4) have been investigated by the Rietveld analysis of their neutron powder diffraction patterns (λ=1.470 Å). These compounds belong to the Aurivillius phase family and are built up by (Bi₂O₂)²⁺ fluorite layers and (A_m-1B_mO_3m+1)^2- (m=2-4) pseudo-perovskite slabs. Bi_2.5Na_0.5Ta₂O₉ (m=2) and Bi_2.5Na_2.5Nb₄O₁₅ (m=4) crystallize in the orthorhombic space group A2₁am, Z=4, with lattice constants of a=5.4763(4), b=5.4478(4), c=24.9710 (15) and a=5.5095(5), b=5.4783(5), c=40.553(3) Å, respectively. Bi_2.5Na_1.5Nb₃O₁₂ (m=3) has been refined in the orthorhombic space group B2cb, Z=4, with the unit-cell parameters a=5.5024(7), b=5.4622(7), and c=32.735(4) Å. In comparison with its isostructural Nb analogue, the structure of Bi_2.5Na_0.5Ta₂O₉ is less distorted and bond valence sum calculations indicate that the Ta-O bonds are somewhat stronger than the Nb-O bonds. The cell parameters a and b increase with increasing m for the compounds Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=2-4), causing a greater strain in the structure. Electron microscopy studies verify that the intergrowth of mixed perovskite layers, caused by stacking faults, also increases with increasing m.     

Isomerization of 5-(2H-Azirin-2-yl)oxazoles: An Atom-Economic Approach to 4H-Pyrrolo[2,3-d]oxazoles

An atom economical method for the preparation of variously substituted 4H-pyrrolo[2,3-d]oxazoles was developed on the basis of thermal isomerization of 5-(2H-azirin-2-yl)oxazoles. The latter were prepared by Rh₂(oct)₄ catalyzed reaction of 2-(3-aryl/heteroaryl)-2-diazoacetyl-2H-azirines with a set of substituted acetonitriles, benzonitriles, acrylonitrile and fumaronitrile. According to DFT calculations the transformation of 5-(2H-azirin-2-yl)oxazole to 4H-pyrrolo[2,3-d]oxazole occurs through the nitrenoid-like transition state to give a 3aH-pyrrolo[2,3-d]oxazole intermediate, followed by 1,5-H-shift.     

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

The room temperature structures of the five layer Aurivillius phases A₂Bi₄Ti₅O₁₈ (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi₂O₂]²⁺ layers interleaved with perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi₂O₂]²⁺ layers and perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks were relieved by tilting of the TiO₆ octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475 K, respectively. Raman spectra of the compounds are also presented.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

The synthesis and structural characterization of the new ternary nitrides: Ca4TiN4 and Ca5NbN5

The ternary nitrides, Ca₄TiN₄ and Ca₅NbN₅, were synthesized in sealed niobium tubes using lithium nitride as a flux at 900 and 1050 °C, respectively. The structures of both compounds were solved from single-crystal X-ray diffraction data. Ca₄TiN₄ is the first example of a calcium group IV nitride; it crystallizes in the triclinic space group (No. 2) with cell parameters a=5.9757(5) Å, b=6.0129(5) Å, c=6.0116(12) Å, α=71.565(4)°, β=79.471(4)°, γ=68.258(4)° and Z=2. Ca₄TiN₄ is isostructural with Na₄TiO₄ and contains tetrahedral TiN₄ units connected through edges and corners to CaN₄ tetrahedra and CaN₅ square pyramids. Ca₅NbN₅ crystallizes in the monoclinic space group C2/m (No. 12) with cell parameters a=11.922(7) Å, b=6.878(5) Å, c=8.936(7) Å, β=101.22(3)° and Z=4. Ca₅NbN₅ is isostructural with Ba₅NbN₅; the structure contains NbN₄ tetrahedra that share vertices with CaN₅ trigonal bipyramids.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.     

Oxygen nonstoichiometry and chemical stability of Nd2−xSrxNiO4+δ

Nonstoichiometric variation of oxygen content in Nd_2−xSr_xNiO_4+δ (x=0, 0.2, 0.4) and decomposition P(O₂) were determined by means of high temperature gravimetry and coulometric titration. The measurements were carried out in the temperature range from 873 to 1173 K and the P(O₂) range from 10⁻²⁰ to 1 bar. Nd_2−xSr_xNiO_4+δ shows the oxygen excess and the oxygen deficient composition depending on P(O₂), temperature, and the Sr content. To evaluate the characteristics of oxygen nonstoichiometric behavior, partial molar enthalpy of oxygen was calculated. The value of partial molar enthalpy of oxygen slightly approaches zero as δ increases in the oxygen excess region while that is independent of δ in the oxygen deficient region. Discussion was made by comparing data of this study with nonstoichiometric and thermodynamic data of La_2−xSr_xNiO_4+δ: Nd_2−xSr_xNiO_4+δ show more oxygen excess than La_2−xSr_xNiO_4+δ in the higher P(O₂) region, while the nonstoichiometric behavior in the oxygen deficient composition is almost the same. The variation of partial molar enthalpy of oxygen with δ for Nd_2−xSr_xNiO_4+δ in the oxygen excess region is much smaller than that of La_2−xSr_xNiO_4+δ. The oxygen nonstoichiometric behavior of Nd_2−xSr_xNiO_4+δ is more ideal-solution-like than that of La_2−xSr_xNiO_4+δ.     

A new structure type of phosphate: Crystal structure of Na2Zn5(PO4)4

A new compound, Na₂Zn₅(PO₄)₄, was identified in the system ZnONa₂OP₂O₅ and high-quality crystal was obtained by the melt method. The crystal structure of this compound was solved by direct method from single crystal X-ray diffraction data. The structure was then refined anisotropically using a full-matrix least square refinement on F² and the refinement converged to R₁=0.0233 and wR₂=0.0544. This compound crystallizes in the orthorhombic system with space group Pbcn, lattice parameters a=10.381(2) Å, b=8.507(1) Å, c=16.568(3) Å and Z=4. The structure is made up of 3D [Zn₅P₄O₁₆]_n²ⁿ⁻ covalent framework consisting of [Zn₄P₄O₁₆]_n⁴ⁿ⁻ layers. The powder diffraction pattern of Na₉Zn₂₁(PO₄)₁₇ is explained by simulating a theoretical pattern with NaZnPO₄ and Na₂Zn₅(PO₄)₄ in the molar ratio of 1:4 and then by Rietveld refinement of experimental pattern. Na₂Zn₅(PO₄)₄ melts congruently at 855 °C and its conductivity is 5.63×10⁻⁹ S/cm.     

Synthesis, characterization, and structure determination of the orthorhombic U2(PO4)(P3O10)

β-UP₂O₇ has been synthesized under hydrothermal conditions (θ=500°C, P=200 MPa), using UO₂ and H₃PO₄. β-UP₂O₇ crystallizes in the orthorhombic space group Pn2₁a, with a=11.526 (2) Å, b=7.048 (2) Å, c=12.807 (2) Å and Z=4. Its structure has been determined through direct methods and difference Fourier synthesis and has been refined to R=0.0396. The structure is built on UO₈ polyhedral chains along the b-axis. PO₄³⁻ and P₃O₁₀⁵⁻ groups coexist in the structure and the latter groups form non-linear chains. Cohesion of the structure is made through the linkage of UO₈ chains by PO₄ and P₃O₁₀ groups leading to the formula U₂(PO₄)(P₃O₁₀) instead of β-UP₂O₇. Vibrational and optical spectra confirm the results obtained by X-ray diffraction. DTA-TGA measurements show that the transformation of U₂(PO₄)(P₃O₁₀) to the cubic α-UP₂O₇ occurs at θ=870°C.