Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

Efficiency studies in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis (NACE) is a relatively new area with several advantages that include enhanced efficiency and improved detection sensitivity. The goal of this study was to investigate the influence of NACE compared to aqueous CE on the separation efficiency of oligosaccharides. The applied voltage and buffer concentration were optimized for the aqueous and nonaqueous buffer media to minimize the band broadening effects of Joule heating and electrophoretic dispersion. At the optimized conditions a 1.5-fold enhancement in efficiency was obtained with the nonaqueous buffer medium.     

Enantiomeric separations by nonaqueous capillary electrophoresis

This paper reviews the recent advances in enantioseparations by nonaqueous capillary electrophoresis (NACE) and the effect of organic solvents on mobility of enantiomers, separation selectivity and resolution. In general, the enantioseparation systems in NACE are similar to those of aqueous capillary electrophoresis (CE) except pure organic solvents are used. The influence of important parameters such as concentration and type of chiral selectors, apparent pH, ionic strength, temperature, and control of electroosmotic flow is discussed. In addition, the reported applications of NACE separations of racemates are presented.     

Special aspects of detection methodology in nonaqueous capillary electrophoresis

Over the recent years considerable efforts have been directed to the design of powerful detector arrangements for capillary electrophoresis (CE). The analytical characteristics of the detector have a great influence on the overall analytical performance of CE investigations. The major detection methods in CE, such as UV-Vis absorbance, fluorescence, mass spectrometry and electrochemical detection, have successfully been adapted also to nonaqueous capillary electrophoresis (NACE). However, the different properties of organic solvent systems require some modification of detector concepts and design compared to aqueous CE. The advances of detector development and application in NACE are reported and discussed with emphasis on methodical aspects.     

Enantiomeric separation of furan derivatives and fused polycycles by cyclodextrin-modified micellar capillary electrophoresis

The enantiomeric separations of highly hydrophobic furan derivatives and polycycles were performed and optimized using CD-modified micellar CE. The most effective chiral selector for the enantiomeric separation of these analytes was hydroxypropyl-gamma-CD. The effects of CD and SDS concentration and organic modifier were examined in order to optimize the separation conditions. The ratio of CD to surfactant concentration affected the enantiomeric separation significantly, with increases in the derivatized CD concentration generally enhancing resolution. Addition of an organic solvent modifier to the run buffer served to increase the analytes' solubility and enhance the separation efficiency. A highly acidic pH was necessary to effectively suppress the EOF when operating in the reverse polarity mode.     

Ionic liquids as electrolytes for nonaqueous capillary electrophoresis

Acetonitrile is a well-suited medium for nonaqueous capillary electroseparations and enables extending the range of applications of capillary electrophoresis (CE) techniques to more hydrophobic species. In this study, the dialkylimidazolium-based low temperature melting organic salts know as "ionic liquids" (ILs) are used as electrolytes. At room temperature these liquids are miscible with acetonitrile which makes it easy to use them for adjustment of analyte mobility and separation. The anionic part as well as the concentration of an IL influence the general electrophoretic mobility of the buffer system. The separation of different analytes is achieved because they become charged in the presence of ILs in separation media. There is also a possibility for a complex formation between the solute and the electrolyte which alters the mobility of the solute. A selected application of separations of phenols and aromatic acids will be discussed.     

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.     

Stacking for nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis (NACE) is a useful mode in CE for separation and quantification of hydrophobic compounds. However, because of the low conductivity of most of the organic solutions, stacking is not used often in this technique and the sample volume is very limited. As a result of the small sample volume, the detection limits are poor. Furthermore, NACE is affected greatly by the presence of salts in the sample. Here, we show that transient isotachophoresis (t-ITP) can be used easily in this type of electrophoresis to enhance the detection limits and also to reverse the deleterious effects of salts in the sample. Several factors, which affect the stacking in this type of electrophoresis, are described. For example, the presence of salts in the organic solvent, type of sample introduction, and the solvent for the terminating ion were all found to have profound effects on the degree of concentration. Furthermore, the separation time can be shortened by t-ITP.     

The principles of migration and dispersion in capillary zone electrophoresis in nonaqueous solvents

Nonaqueous solvents are interesting media for capillary zone electrophoresis as they can affect all relevant parameters governing the separation of sample zones. However, for a rational planning of the working conditions and an appropriate interpretation of the results obtained, the basic principles of ion migration and zone dispersion must be understood. Many solvent induced effects need to be carefully considered and recognized before full exploitation of nonaqueous solvents can take place. It is the goal of this overview to present the fundamental physicochemical aspects of capillary zone electrophoresis in nonaqueous solvent systems. Therefore, the detailed discussion is related to the effect of organic solvents on electrophoretic mobilities (based on the theory of conductance), acid-base dissociation behavior (based on the transfer activity coefficient and medium effect), pH, separation efficiency (with regard to mobility and diffusion coefficient in dilute solutions), resolution, and electroosmotic flow.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Interface for coupling nonaqueous wide-bore capillary electrophoresis with mass spectrometry

A liquid-junction-type interface where a thin spraying capillary is inserted inside the separation capillary was constructed for coupling nonaqueous wide-bore capillary electrophoresis (CE) to mass spectrometry (MS). The robust structure of the interface provided fairly easy capillary handling. The study was carried out with uncoated CE capillaries of 200 and 320 microm inner diameter (ID). 1-Propanol-acetonitrile (80:20 v/v) with acetate electrolyte provided a low conducting medium for CE and good spraying conditions for electrospray ionization (ESI) without sheath-flow and drying gas. Methamphetamine, alprenolol, and levorphanol served as model compounds. Approximate detection limits with the 200 microm ID capillary were 35-265 ng/mL.     

Separation of living and dead polymers in synthetic polypeptide mixtures by nonaqueous capillary electrophoresis using differences in ionization states

The complexity in the mechanisms of polymerization of N-carboxyanhydrides requires the development of new analytical techniques able to separate mixtures of synthetic polypeptides. This work focuses on the separation of poly(N(epsilon)-trifluoroacetyl-L-lysine) (PTLL) mixtures by nonaqueous capillary electrophoresis (CE). The main goal of this work was to find electrophoretic conditions that permit the separation and the quantification of the dead polymer families that were previously identified in the samples. The influence of the pH of the electrolyte on the selectivity of the separation was carefully investigated. The mechanisms of separation of the PTTLs are discussed as a function of their ionization state. The separations obtained on a noncovalently coated capillary were compared with those obtained on a fused-silica capillary. Finally, using two different electrolytes, it is possible to quantify the three families of PTLLs, namely, the living PTLLs, the dead PTLLs with N-formyl end group and the dead PTLLs with a carboxylic end group. These results confirm the importance of CE for the separation of synthetic organic polymers in nonaqueous electrolytes.     

Effects of background electrolyte composition and addition of selectors on separation selectivity in nonaqueous capillary electrophoresis

This review gives a survey of the approaches employed to obtain, enhance and tune selectivity in nonaqueous capillary electrophoresis (NACE). Recent developments in NACE are described and the effects of background electrolyte composition and addition of selectors on separation selectivity are discussed. The use of one organic solvent, a mixture of several organic solvents or the use of additives to tune separation selectivity in NACE is presented and a list of relevant applications is included.     

Micro-porous membrane liquid-liquid extraction as an enrichment step prior to nonaqueous capillary electrophoresis determination of sulfonylurea herbicides

A method based on micro-porous membrane liquid-liquid extraction (MMLLE) enrichment and nonaqueous capillary electrophoresis (CE) separation, was established for the analysis of sulfonylurea herbicides in water samples. After MMLLE, the analyte trapped in the chloroform was treated mildly with nitrogen flow to dryness and then dissolved in 200 μl of 4 mM Tris methanol solution for CE analysis. Five sulfonylurea herbicides were separated by nonaqueous CE with Tris/acetate of methanol solution as the run buffer. MMLLE related parameters such as organic solvent used as acceptor, sample flow rate, sample pH, enrichment time, and salt effect were investigated with tribenuron methyl (TBM) as a model compound. Results showed that with a sample flow rate of 3.0 ml min⁻¹ and an enrichment time of 20 min, the proposed method has good linear relationship over the scope of 1-15 ng ml⁻¹ with related coefficient of R²=0.9911, and a detection limit of 0.4 ng ml⁻¹. This method was applied to determine TBM in realworld water samples with recoveries over the range of 89-97%.     

Separation of open-cage fullerenes using nonaqueous capillary electrophoresis

In this study, nonaqueous capillary electrophoresis (NACE) was used to separate three open-cage fullerenes. Trifluoroacetic acid (TFA) was used as the nonaqueous background electrolyte to change the analytes’ mobilities. The selectivity and separation efficiency were critically affected by the nature of the buffer system, the choice of organic solvent, and the concentrations of TFA and sodium acetate (NaOAc) in the background electrolyte. The optimized separation occurred using 200 mM TFA/20 mM NaOAc in MeOH/acetonitrile (10:90, v/v), providing highly efficient baseline separation of the open-cage fullerenes within 5 min. The migration time repeatability for the three analytes was less than 1% (relative standard deviation). Thus, NACE is a rapid, useful alternative to high-performance liquid chromatography for the separation of open-cage fullerenes.     

Nonaqueous capillary electrophoresis-mass spectrometry

Nonaqueous background electrolytes broaden the application of capillary electrophoresis displaying altered separation selectivity and interactions between analytes and buffer additives compared to aqueous background electrolytes. In addition, nonaqueous capillary electrophoresis (NACE) appears to be ideally suited for online coupling with mass spectrometry due to the high volatility and low surface tension of many organic solvents. Despite these advantages and an increasing use of nonaqueous background electrolytes in CE, coupling of NACE to mass spectrometry has not yet been applied very often to date. The present review summarizes the applications of online NACE-MS with regard to the analysis of drugs, stereoisomers, peptides, alkaloids, polymers and others. A brief discussion of solvent effects in NACE and pH of nonaqueous background electrolyte systems is also presented.     

Comparison of aqueous and nonaqueous carrier electrolytes for the separation of penicillin V and related substances by capillary electrophoresis with UV and mass spectrometric detection

A method for the determination of penicillin V together with its impurities and by-products formed during biosynthesis, using capillary electrophoresis (CE) with UV and electrospray-mass spectrometric (ESI-MS) detection is presented. Aqueous and nonaqueous electrolytes containing 20 mM ammonium acetate were investigated to determine their suitability for the separation of these analytes. These carrier electrolytes were optimized with respect to the pH and the solvent/s used (water, methanol, acetonitrile, ethanol and isopropanol) and it was shown that although the nonaqueous electrolytes offered unique separation selectivities, the best results in terms of selectivity and sensitivity were obtained for the aqueous system. Finally, the applicability of this method for the analysis of a mixture representative of a real fermentation broth was demonstrated using an aqueous carrier electrolyte with both UV and ESI-MS detection.     

Separation of transition metals in nonaqueous media with capillary electrophoresis

The separation of transition metal Ni2+, Cu2+, Co2+, Zn2+, Cd2+ and Fe3+ in methanol was investigated by using different types of organic acids as complexing agents. In pure methanol, the weaker and simpler acetic, propionic, butyric and valeric acids could enhance metal ions selectivity by increasing acid concentration and metal ions could be separated with high efficiency. However, hydroxycarboxylic acids obviously made separation efficiency worse. The effect of mixed organic acids, mixture solvent (methanol-acetonitrile, methanol-water) on metal ions separation was discussed further. The advantages of using nonaqueous solvent over aqueous for metal ions separation were shown finally.     

Polymethacrylate-type monoliths functionalized with chiral amino phosphonic acid-derived strong cation exchange moieties for enantioselective nonaqueous capillary electrochromatography and investigation of the chemical composition of the monolithic polymer

In situ prepared monolithic poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) capillary columns were activated to reactive thiol-monoliths and subsequently functionalized with (S)-N-(4-allyloxy-3,5-dichlorobenzoyl)-2-amino-3,3-dimethylbutanephosphonic acid as chiral selector by radical addition to afford enantioselective strong cation exchanger (SCX) capillary columns (100 microm inner diameter (ID)). These monolithic capillaries were devised for the enantioseparation of chiral bases by nonaqueous and aqueous capillary electrochromatography (CEC) and the results obtained for mefloquine and its tert-butylcarbamate as test compounds were compared to those obtained with particulate silica-based analogs (packed columns). Despite abolishment of nonspecific ionic interactions between the cationic solutes and residual silanols that may diminish separation factors of the silica-based chiral SCX particles, the poly(GMA-co-EDMA)-supported SCX monolith did not, as expected, show better enantioselectivities, which was assumed to be due to detrimental nonspecific interactions between the analytes and the lipophilic polymer backbone. In order to minimize these unfavorable contributions, less lipophilic monoliths were developed by copolymerization of different amounts of the hydrophilic monomer 2-hydroxyethyl methacrylate (HEMA) with GMA and EDMA, leading to GMA-co-HEMA-co-EDMA-terpolymeric monoliths. By this increase of the hydrophilicity of the monolithic support the enantioselectivity of the resultant SCX stationary phase could be enhanced and reached values comparable to the packed silica-based enantioselective SCX capillaries. Additionally, the mobile phase composition and other variables were examined and it could be shown that the separation factors are considerably affected by diverse parameters such as acetonitrile-methanol ratio and type and concentration of the counterion. Mefloquine enantiomers could be separated with alpha-values up to 1.56 and a maximum plate count of ca. 60,000 m(-1) could be achieved.     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.