Nano‐baskets in Emulsion Liquid Membranes for Selective Extraction of Alkali Metals

Nano‐assisted inclusion separation of alkali metals from basic solutions was reported by inclusion‐facilitated emulsion liquid membrane process. The novelty of this study is application of nano‐baskets of calixarene in the selective and efficient separation of alkali metals as both the carrier and the surfactant. For this aim, four derivatives of p‐tert‐calix[4]arene bearing different sulfonamide moieties were synthesized and their inclusion‐extraction parameters were optimized. The selectivity of membrane over more than ten interfering cations was examined and the results reveled that under the optimized operating condition, the degree of inclusion‐extraction of alkali metals was as high as 98‐99%.     

Carrier facilitated transport of thorium from HCl medium using Cyanex 923 in n-dodecane containing supported liquid membrane

Present studies deal with supported liquid membrane (SLM) technique for the separation of thorium from hydrochloric acid (HCl) medium using Cyanex 923 as a carrier. Effects of feed acidity, strippant, and membrane pore size and membrane thickness on the transport of thorium have been studied in detail. The optimized parameters were applied for separation of thorium from a radioanalytical waste. Stability of the membrane and membrane support was investigated. Transport of thorium increased from 78.3 to about 93.7 % with increase in acidity from 0.5 to 2 M using 0.3 M Cyanex 923 in n-dodecane as carrier and 2 M ammonium carbonate as stripping phase. The transport of thorium decreased above 2 M HCl. An attempt was made to model the physicochemical transport of thorium in SLM and understand the mechanism of thorium transport.     

Studies on the separation of 90Y from 90Sr by solvent extraction and supported liquid membrane using TODGA: role of organic diluent

Solvent extraction and supported liquid membrane transport studies on Y(III) and Sr(II) were carried out using both nitric as well as hydrochloric acid feed conditions using N,N,N′,N′-tetra-octyldiglycolamide (TODGA) in several organic diluents. The solvent extraction studies indicated extremely large separation factor (SF) values with chloroform, carbon tetrachloride, 1-decanol and hexone when 6 M HNO₃ was used as the feed. On the other hand, the SF values were 1–2 orders of magnitude lower when the nitric acid concentration was 3 M HNO₃. Significantly large SF values were also obtained from 6 M HCl when xylene, carbon tetrachloride, n-dodecane and hexone were used as the diluent. Though mass transfer was not very promising in the supported liquid membrane studies with most of the diluent systems, quantitative Y(III) transport was observed with 0.1 M TODGA in xylene with negligible Sr(II) transport suggesting possibility of obtaining carrier free ⁹⁰Y. The purity of the radiotracer was checked by half-life method.     

Green and efficient extraction strategy to lithium isotope separation with double ionic liquids as the medium and ionic associated agent

The paper reported a green and efficient extraction strategy to lithium isotope separation. A 4-methyl-10-hydroxybenzoquinoline (ROH), hydrophobic ionic liquid—1,3-di(isooctyl)imidazolium hexafluorophosphate ([D(i-C₈)IM][PF₆]), and hydrophilic ionic liquid—1-butyl-3-methylimidazolium chloride (ILCl) were used as the chelating agent, extraction medium and ionic associated agent. Lithium ion (Li⁺) first reacted with ROH in strong alkali solution to produce a lithium complex anion. It then associated with IL⁺ to form the Li(RO)₂IL complex, which was rapidly extracted into the organic phase. Factors for effect on the lithium isotope separation were examined. To obtain high extraction efficiency, a saturated ROH in the [D(i-C₈)IM][PF₆] (0.3 mol l^?1), mixed aqueous solution containing 0.3 mol l^?1 lithium chloride, 1.6 mol l^?1 sodium hydroxide and 0.8 mol l^?1 ILCl and 3:1 were selected as the organic phase, aqueous phase and phase ratio (o/a). Under optimized conditions, the single-stage extraction efficiency was found to be 52 %. The saturated lithium concentration in the organic phase was up to 0.15 mol l^?1. The free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS) of the extraction process were ?0.097 J mol^?1, ?14.70 J mol K^?1 and ?48.17 J mol^?1 K^?1, indicating a exothermic process. The partition coefficients of lithium will enhance with decrease of the temperature. Thus, a 25 °C of operating temperature was employed for total lithium isotope separation process. Lithium in Li(RO)₂IL was stripped by the sodium chloride of 5 mol l^?1 with a phase ratio (o/a) of 4. The lithium isotope exchange reaction in the interface between organic phase and aqueous phase reached the equilibrium within 1 min. The single-stage isotope separation factor of ⁷Li–⁶Li was up to 1.023 ± 0.002, indicating that ⁷Li was concentrated in organic phase and ⁶Li was concentrated in aqueous phase. All chemical reagents used can be well recycled. The extraction strategy offers green nature, low product cost, high efficiency and good application prospect to lithium isotope separation.     

Radiation stability of several polymeric supports used for radionuclide transport from nuclear wastes using liquid membranes

In an attempt to evaluate radiation stability of several polymeric materials used as the support in supported liquid membrane studies for the transport of radionuclides from nuclear waste, flat sheets made from polytetrafluoroethylene, polysulfone, polyether sulfone, polyacrylonitrile and polyvinylidenefluoride were irradiated to varying extents using a ⁶⁰Co gamma ray source and subsequently, the transport efficiency of the irradiated flat sheets were evaluated. The membrane integrity was assessed from the transport rates of Am³⁺ from a feed containing 3 M HNO₃ into a receiver phase containing 0.01 M HNO₃ as the strippant while 0.1 M TODGA (N,N,N′,N′-tetraoctyldiglycolamide) + 0.5 M DHOA (di-n-hexyloctanamide) in n-dodecane was used as the carrier extractant. The radiation stability of the membrane filters was evaluated after irradiating them up to 20 MRad absorbed dose in a gamma chamber.     

Transport of U(VI) from sulphuric acid medium across supported liquid membrane (SLM) containing di-(2-ethylhexyl) phosphoric acid (D2EHPA)/n-dodecane as a carrier

This paper reports on the supported liquid membrane (SLM) based transport studies of U(VI) from sulphate medium using di-(2-ethylhexyl) phosphoric acid/n-dodecane as carrier. Polytetrafluoroethylene membrane was used as solid support and H₂SO₄ as receiver phase. The effects of various parameters such as receiver phase concentration, feed acidity, carrier concentration, U(VI) concentration, membrane thickness and membrane pore size on U(VI) transport had been investigated. With increase in H₂SO₄ concentrations and pH of feed solution there is an increase in U(VI) transport across the SLM. Similarly with increase in membrane thickness the U(VI) transport decrease whereas in case of pore size variation reverse results are obtained. The membrane thickness variation results showed that the U(VI) transport across the SLM is entirely diffusion controlled and the diffusion coefficient the D _(o) was calculated as 1.36 × 10^?7 cm² s^?1. Based on optimized condition, a scheme had been tested for selective recovery of U(VI) from ore leach solution containing a large number of other metal ions.     

Determination of Ytterbium(III) Ions in Soil and Sediment Samples by a New Polymeric Yb3+-PVC Membrane Sensor

Abstract

A polyvinyl chloride (PVC) membrane sensor for ytterbium(III) ions was prepared, based on 2,5-bis(5-tert-butyl-benzoxazol-2-yl)thiophene (BBT) as a membrane carrier. The sensor illustrates the following characteristics: a linear dynamic range of 1.0 × 10^?6 to 1.0 × 10^?2 M; a Nernstian slope of 19.7 ± 0.5 mV decade^?1; a detection limit of 4.4 × 10^?7 M; a response time of <10 s; and use for at least 2 months without any significant potential divergence in the pH range of 3.5–8.4. Moreover, the recommended selective sensor revealed a comparatively satisfactory selectivity regarding most of the alkali and alkaline earth ions and some of the transition-metal and heavy-metal ions. In fact, it was used as an indicator electrode in the Yb(III) potentiometric titration with ethylene diamine tetra-acetic acid (EDTA) and the determination of concentration of Yb(III) ions in soil and sediment samples.     

Novel Microporous Membrane/Solvent Microextraction for Preconcentration of Cinnamic Acid Derivatives in Rhizoma Typhonii

A novel microporous membrane/solvent microextraction (MPMSME) approach was developed in which a piece of microporous filter membrane was used as not only extraction solvent holder but also solid phase extraction unit. Subsequently, high-performance liquid chromatography with an UV detector was conducted. The wide exchange surface and very little organic solvent consumption made this sample pretreatment technology very interesting. The cinnamic acid derivatives were used as model analytes to evaluate the procedure. Parameters that affect the MPMSME such as type of extraction solvent, membrane area (or volumes of extraction solvent), aqueous phase pH, ionic strength, extraction stirring rate, extraction time, and sample volume were investigated and optimized. The enrichment factor (EF) of analyte was defined in MPMSME. Under the optimized conditions, the EFs of cinnamic acid derivatives were 43–144. Good linearities were obtained from 4 to 4,000 ng mL^?1 for all the analytes with regression coefficients of between 0.9956 and 0.9977; the limits of quantification were below 0.4 ng mL^?1, and satisfactory recoveries (93–106 %) and precisions (0.37–13 %) were also achieved. The experimental results showed that the method was simple, rapid, practical, and effective for preconcentration and determination of the cinnamic acid derivatives in rhizoma typhonii.     

Counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) using tris-2-ethyl hexyl phosphate (TEHP)

Evaluation of tris-2-ethyl hexyl phosphate (TEHP) for counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) from nitric acid medium was carried out under wide experimental conditions. Batch extraction studies were carried out to investigate the effect of nitric acid concentration in feed solution, U(VI)/Th(IV) ratio and extractant concentration and the results were compared with established solvent such as tri-n-butyl phosphate (TBP) for separation of U(VI) from nitric acid medium. McCabe–Thiele diagrams for extraction as well as stripping of U(VI) were constructed under simulated conditions. Based on batch experiments, six stage counter-current extraction studies were conducted under various TEHP concentration and it was observed that 0.1 M TEHP/n-paraffin was most suitable for selective recovery of U(VI) from a mixture of U(VI)–Th(IV). An optimized condition, 0.1 M TEHP/n-paraffin, 2 M HNO₃ in feed and six number of stages was evaluated for selective extraction and stripping of U(VI) from a solution containing mixture of U(VI)–Th(IV)–Y(III) in nitric acid medium. The U(VI) in strip solution was precipitated using 30 % H₂O₂ at pH ~3. Average particle size of the final precipitate was found to be ~33 μm.     

Selective separation of yttrium(III) through a liquid membrane system using 2-thenoyltrifluoroacetone as an extractant carrier

2-Thenoyltrifluoroacetone has been offered as a mobile carrier in organic phase for the transport and selective separation of yttrium from aqueous media using a liquid membrane system. Perceivably, the use of n-propylamine (PA) in the source phase enhances the transport of yttrium ions. The extraction and stripping conditions have entirely been evaluated and explained. The suggested method has been utilized for the separation of yttrium(III) from its binary mixtures with strontium(II) and some other cations such as Ni²⁺, Co²⁺, Ag⁺, Fe²⁺, Al³⁺, Cu²⁺, Hg²⁺and Cs⁺ in aqueous solutions of pH 5.4 in the presence of PA, while 1 M nitric acid was acting as a stripping agent in the receiving division. Cyanide ion and 5-sulfosalicylic acid have been used as masking agents to minimize the interferences from different transition metal ions and Al³⁺ in the source phase, respectively. ⁹⁰Y in secular equilibrium with ⁹⁰Sr in the source phase, was transferred to receiving phase and separated completely from its long-lived parent isotope. The activity of the transported ⁹⁰Y was found to decay with a half-life 64.17 ± 0.05 h. The purity of yttrium-90 was comparable or better than the other applied liquid membrane systems for purification of yttrium-90.     

A Novel Holmium(III) Membrane Sensor Based on N‐(1‐Thien‐2‐Ylmethylene)‐1,3‐Benzothiazol‐2‐Amine

Abstract

A novel plasticized membrane sensor for Ho(III) ions based on N‐(1‐thien‐2‐ylmethylene)‐1,3‐benzothiazol‐2‐amine (TBA) as a neutral carrier was prepared. The best performance was obtained with a membrane composition of 31% PVC, 61% benzyle acetate, 2% sodium tetra phenyl borate and 6% carrier. The electrode exhibits a Nernstian response for Ho(III) ions over a particular concentration range (1.0×10^?5?1.0×10^?2 M) with a slope of 19.7±0.2 mV decade^?1. The limit of the detection is 7.0×10^?6 M. The sensor has a response time of <15 s and a useful working pH range of 4.0–9.5. The proposed sensor discriminates relatively well towards Ho(III) ions with regard to common alkali, alkaline earth, and specially lanthanide ions. It was successfully applied as an indicator electrode in a potentiometric titration of Ho(III) ions with EDTA. It was also applied in determination of fluoride ions in a mouth wash preparation. The proposed sensor was applied for the determination of Ho(III) ion concentration in binary mixtures.     

Application of magnetic nanoparticles for the extraction of radium-226 from water samples

Bare (unmodified) and crown ether (CE)-modified Fe₃O₄ magnetic nanoparticles (MNPs) were investigated for the rapid extraction of ²²⁶Ra from water samples. It involved synthesizing the MNPs, introducing them into the sample solutions, ultrasonicating and agitating the suspension, magnetically separating the nanoparticles from solution, and measuring the ²²⁶Ra content in the supernatant. Experimental parameters such as salt choice, salt concentration and pH were optimized to achieve maximum extraction of ²²⁶Ra onto the MNPs. ²²⁶Ra content was determined using a Hidex 300SL liquid scintillation counter with α/β separation capability, or a gamma spectrometric detection system. The bare Fe₃O₄ nanoparticles showed significant pH dependence for the extraction of ²²⁶Ra from an aqueous solution over a pH range of 2–10. They gave an extraction of 95 ± 1 and 98 ± 1 % at pH 9 in 0.1 M NaCl and 0.1 M NaClO₄, respectively, whereas an extraction of 8–24 % was obtained, over the pH ranges from 2 to 5. The CE-modified MNPs yielded extraction efficiencies as high as 99 ± 1 % in the presence of 0.01 M picric acid at pH 4. This study demonstrates that the surface functionalization of Fe₃O₄ MNPs with suitable ligand modification can offer a selective mode of extraction for ²²⁶Ra in the presence of its daughter progenies.     

Radiochemical studies relevant to the separation of 68Ga and 68Ge

The radiochemical separation of radiogallium from radiogermanium was studied using ion-exchange chromatography (Amberlite IR-120) and solvent extraction (Aliquat 336 in o-xylene). Both Amberlite IR-120 and Aliquat 336 in o-xylene have been used for the first time in separations involving radiogallium and radiogermanium. For tracer studies the radionuclides ⁶⁸Ge (t _1/2 = 270.8 days), ⁶⁹Ge (t _1/2 = 39 h) and ⁶⁷Ga (t _1/2 = 78.3 h) were used. They were produced by the nuclear reactions ^natGa(p,xn)^68,69Ge and ^natZn(p,xn)⁶⁷Ga, respectively, and separated from their target materials in no-carrier-added form. Several factors affecting the separation of radiogallium from radiogermanium were studied and for each procedure the optimum conditions were determined. The solvent extraction using Aliquat 336 was found to be better. The separation yield of radiogallium was >95%, the time of separation short, the contamination from radiogermanium <0.008% and the final product was obtained in 0.5 M KOH. This method was adapted to the separation of n.c.a. ⁶⁸Ga from its parent n.c.a. ⁶⁸Ge. The quality of the product thus obtained is discussed.     

Separation of no-carrier-added 113,117mSn and 113m,114mIn from alpha particle irradiated natural cadmium target

A natural cadmium foil was irradiated by 42 MeV α-particles to produce ^113,117mSn, ^{111,113m,114m}In simultaneously in the target matrix. After the complete decay of short lived radionuclides, long-lived NCA products were separated sequentially from the bulk cadmium by liquid–liquid extraction using di-(2-ethylhexyl)phosphoric acid (HDEHP) dissolved in cyclohexane as organic phase and HCl as aqueous phase. At the optimum condition, 10^?2 M HCl and 5 % HDEHP, NCA In along with NCA Sn radionuclides (75 %) were separated from the bulk Cd resulting to high separation factors of 2.7 × 10⁴ (D _In/D _Cd) and 500 (D _Sn/D _Cd), respectively. The NCA In was stripped back completely to the aqueous phase by 6 M HCl leaving NCA Sn in the HDEHP phase with a separation factor (D _Sn/D _In) of 3.94 × 10⁶.     

Homogeneous Liquid–Liquid Microextraction for Determination of Organochlorine Pesticides in Water and Fruit Samples

A fast and effective preconcentration method for extraction of organochlorine pesticides (OCPs) was developed using a homogeneous liquid–liquid extraction based on phase separation phenomenon in a ternary solvent (water/methanol/chloroform) system. The phase separation phenomenon occurred by salt addition. After centrifugation, the extraction solvent was sedimented in the bottom of the conical test tube. The OCPs were transferred into the sedimented phase during the phase separation step. The extracted OCPs were determined using gas chromatography–electron capture detector. Several factors influencing the extraction efficiency were investigated and optimized. Optimal results were obtained at the following conditions: volume of the consolute solvent (methanol), 1.0 mL; volume of the extraction solvent (chloroform), 55 μL; volume of the sample, 5 mL; and concentration of NaCl, 5 % (w/v). Under optimal conditions, the preconcentration factors in the range of 486–1,090, the dynamic linear range of 0.01–100 μg L^?1, and the limits of detection of 0.001–0.03 μg L^?1 were obtained for the OCPs. Using internal standard, the relative standard deviations for 1 μg L^?1 of the OCPs in the water samples were obtained in the range of 4.9–8.6 % (n = 5). Finally, the proposed method was successfully applied for extraction and determination of the OCPs in water and fruit samples.     

Polymeric membrane and coated graphite electrode based on newly synthesized tetraazamacrocyclic ligand for trace level determination of nickel ion in fruit juices and wine samples

Novel polymeric membrane electrode (PME) and coated graphite electrode (CGE) for nickel ion were prepared based on 2,9-(2-methoxyaniline)₂-4,11-Me₂-[14]-1,4,8,11-tetraene-1,5,8,12-N₄ as a suitable neutral ionophore. The addition of lipophilic anion excluder (NaTPB) and various plasticizers viz o-nitrophenyloctylether (o-NPOE), dioctylphthalate (DOP), dibutylphthalate (DBP), 1-chloronaphthalene (CN) and tri-n-butylphosphate (TBP) have found to improve the performance of the sensors. The best performance was obtained for the membrane sensor having a composition of I:NaTPB:TBP:PVC in the ratio 6:4:100:90 (w/w; mg). The electrodes exhibit Nernstian slopes for Ni²⁺ ions over wide concentration ranges of 4.6 × 10^?7–1.0 × 10^?1 M for PME and 7.7 × 10^?8–1.0 × 10^?1 M for CGE with limits of detection of 2.7 × 10^?7 M for PME and 3.7 × 10^?8 M for CGE. The response time for PME and CGE was found to be 10 and 8 s respectively. The potentiometric responses are independent of the pH of the test solution in the pH range 3.0–8.0. The proposed electrodes revealed good selectivities over a wide variety of other cations including alkali, alkaline earth, transition and heavy metal ions. The coated graphite electrode was used as an indicator electrode in the potentiometric titration of nickel ion with EDTA and in direct determination in different fruit juices and wine samples.     

Separation and purification of 90Sr from PUREX HLLW using N,N,N′,N′-tetra(2-ethylhexyl) diglycolamide

This paper describes a method for the separation and purification of ⁹⁰Sr from PUREX–HLLW employing solvent extraction and precipitation techniques. 30 % TBP in n-dodecane was used for the removal of residual uranium, plutonium and neptunium from HLLW. Trivalent actinides and lanthanides were subsequently removed using N,N,N’,N’-tetra(2-ethylhexyl) diglycolamide (TEHDGA, 0.20 M in 30 % isodecyl alcohol and n-dodecane). ⁹⁰Sr was selectively extracted from actinides and lanthanides depleted HLLW using 0.3 M TEHDGA in 5 % isodecyl alcohol and dodecane. Loaded strontium was stripped using 0.01 M HNO₃ and further purified by radiochemical precipitation technique after adding Fe and natural strontium as carriers. Based on the experimental results, a flow-sheet was formulated and mCi levels of ⁹⁰Sr recovered.     

Erbium(III) PVC Membrane Ion-Selective Sensor based on 4-(2-Thiazolylazo)resorcinal

Abstract

4-(2-Thiazolylazo)resorcinol (TR) was used as a new compound to play the role of an excellent ion carrier in the fabrication of an Er(III) membrane electrode. The electrode shows a very good selectivity toward Er(III) ions over a wide variety of cations, including alkali, alkaline earth, transition, and heavy-metal ions. The proposed sensor exhibits a Nernstian behavior (with slope of 19.6 ± 0.6 mV per decade) over a wide concentration range (1.0 × 10^?6 to 1.0 × 10^?2 M). The detection limit of the sensor is 6.6 × 10^?7 M. It has a very short response time, in the whole concentration range (～10 s), and can be used for at least 12 weeks in the pH range of 2.8–9.3. The proposed sensor was successfully applied as an indicator electrode for the potentiometric titration of a Er(III) solution, with EDTA. It was also successfully applied to the F^? ion determination in some mouthwashing solutions.     

Magnetite-doped eggshell membrane as a magnetic sorbent for extraction of aluminum(III) ions prior to their fluorometric determination

We have explored the feasibility of using a magnetite-doped eggshell membrane as a magnetic solid phase extraction sorbent for the separation of aluminum ion from aqueous solutions. The sorbent was characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. A fast, simple and non-expensive method was then developed for the determination of trace quantities of Al(III) in water and food samples by combining magnetic solid phase extraction with fluorometric quantitation via its highly fluorescent complex with 8-hydroxyquinoline. The effects of pH value, amount of sorbent, sample volume, elution conditions and interfering ions on extraction were optimized. Under optimum conditions, the calibration graph extends from 0.5 to 65.0 μg L^?1, the limit of detection is 0.2 μg L^?1, and the enrichment factor is 84. The method was validated by the successful analysis of a standard reference material (NIST SRM 1549; nonfat milk powder) and applied to the determination of Al(III) in several waters, black tea, tomato paste and cocoa powder samples. Figure

Synthesis and application of magnetite-doped eggshell membrane for the separation of aluminum(III) ions from aqueous solutions is shown. After extraction for 5 min, the sorbent was gathered under an external magnetic field and the clear supernatant was directly decanted. The enriched analyte was then eluted from the sorbent prior to determination.     

Synthesis of nano-pore size Al(III)-imprinted polymer for the extraction and preconcentration of aluminum ions

In this study, an ion imprinted polymer (IIP) was prepared for the selective separation and preconcentration of trace levels of aluminum. Al(III) IIP was synthesized in the presence of Al(III)-8-hydroxyquinoline (oxine) complex using styrene and ethylene glycol dimethacrylate as a monomer and crosslinker, respectively. The imprinted Al(III) ions were completely removed by leaching the IIP with HCl (50 % v/v) and were characterized by FTIR and scanning electron microscopy. The maximum sorption capacity for Al(III) ions was found to be 3.1 mg g^?1 at pH 6.0. Variables affecting the IIP solid phase extraction were optimized by the univariable method. Under the optimized conditions, a sample volume of 400 mL resulted in an enhancement factor of 194. The detection limit (defined as 3 S _b/m) was found to be 1.6 μg L^?1. The method was successfully applied to the determination of aluminum in natural water, fruit juice and cow milk samples.