Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Oriented Synthesis of One‐Dimensional Polypyrrole Molecule Chains in a Metal‐Organic Framework

We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.

     

Poly(cyclic imino ether)s Beyond 2‐Substituted‐2‐oxazolines

2‐Oxazolines (2‐OZO) are 5‐membered cyclic imino ethers whose cationic ring‐opening polymerization (CROP) mechanism and resulting polymer properties are extensively studied. However, also 6‐ and 7‐membered cyclic imino ethers can be polymerized via CROP. Together with the much less studied 4‐ and 5‐substituted main‐chain chiral poly(2‐oxazoline)s (P‐2‐OZO), these compounds are interesting monomers to enhance the versatility of (co)poly(cyclic imino ether)s. To emphasize the potential of such alternative cyclic imino ether monomers, we provide an overview on the polymerizations of 2‐oxazine (2‐OZI) and chiral 4‐ and 5‐substituted 2‐OZO as well as of selected properties of the resulting polymers. In addition, the hydrolysis of these polymers into the corresponding poly(alkylene imine)s will be addressed.

     

Atom‐Transfer Radical Polymerization of 2‐(N,N‐Dimethylamino)ethyl Acrylate

ATRP of 2‐(N,N‐dimethylamino)ethyl acrylate (DMAEA) was investigated using CuBr or CuCl with different multidentate ligands. The catalyst was found active for DMAEA polymerization when ligated with tris[2‐(N,N‐dimethylamino)ethyl]amine. Good control over molecular weight was achieved, but quaternization of the terminal monomeric/polymeric tertiary amine by the C Br group of polyDMAEA caused chain termination. Using a chloride‐based system helped to suppress chain termination. Amphiphilic poly(methyl acrylate)‐block‐polyDMAEA was synthesized using polyMA as a macroinitiator.

Molecular weights and polydispersities of polyDMAEA versus DMAEA conversion for different catalyst systems.     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Uncharged Water‐Soluble Metal‐Bis‐Porphyrins Like Molecular Tweezers for Amino Acids

Some new water‐soluble bis‐porphyrins, constituted of two porphyrin units spaced by means of aliphatic bridges of different lengths, were synthesized and characterized by MALDI‐TOF mass spectrometry, ¹H NMR and UV‐vis spectroscopy. The hydrosolubility of these uncharged compounds was guaranteed from the presence of six long PEG chains bound on the peripheral positions of the two porphyrins. Cobalt and zinc derivatives were also prepared. In the case of Co‐bis‐porphyrin, the appearance of induced circular dichroism (ICD) signals in water solution confirmed the formation of stable complexes with some amino acids, in which the bis‐porphyrin behaves like molecular tweezers.

     

Viscoelastic Behavior and Force Nature of Thermo‐Reversible Epoxy Dry Adhesives

The gecko adhesion phenomenon has stimulated efforts to produce synthetic patterned dry adhesives. Besides introducing surface patterns on dry adhesives, it is also highly desirable to understand their intrinsic material properties. This communication reports the viscoelastic behavior of non‐patterned epoxy elastomers exhibiting intrinsic adhesion that is much higher than that of elastomers typically used for structure patterning. The diverse molecular origin of the adhesion is revealed through the study of adhesion against various substrates.

     

Synthesis of POSS‐Functionalized Polyisobutylene via Direct Initiation

POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl₄ initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. ¹H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.

     

Nitroxide‐Mediated Polymerization of Styrene in a Continuous Tubular Reactor

Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.

Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor.     

Kinetic Modeling of Semi‐Interpenetrating Polymer Network (SIPN) Process ‐ A Comprehensive Study on the Case of Polyethylene/Polystyrene Semi‐I IPN

A comprehensive kinetic model is developed for a semi‐interpenetrating polymer network (SIPN) process, which involves simultaneous crosslinking, grafting, and degradation. Computational expense has been reduced considerably through a new component decomposition strategy, where a continuous variable approximation and a fixed pivot technique are applied for modeling each component. The inter‐polymer formulation is then reconstructed by a statistical approach. Based on the kinetic parameters obtained from the literature and a series of experiments, the model provides consistent agreement for gel fraction, joint molecular weight distribution (MWD) and polymer composition predicted in the studied cases, showing promising capability for the SIPN industrial application as well as for other polymer composite systems.

     

Fabrication of Thermo‐Responsive Hybrid Hydrogels by In‐Situ Mineralization and Self‐Assembly of Microgel Particles

Summary: An in‐situ mineralization process in the presence of thermo‐responsive microgels leads to the formation of well‐defined hybrid materials. Experimental data suggest that control of the mineralization process in the presence of the microgels offers the possibility to obtain sub‐micrometer‐sized hybrid particles or macroscopic hybrid hydrogels. The rapid formation of CaCO₃ crystals in the microgel structure favors the preparation of the hybrid particles wherein inorganic crystals cover the shell layer of the microgel. The slow formation of CaCO₃ crystals leads to the simultaneous self‐assembly of the microgel particles on the bottom of the reaction vessel, and the formation of a physical network. It has been demonstrated that hybrid hydrogel materials with different calcium carbonate contents and temperature‐dependent swelling‐deswelling properties can be prepared.

Formation of a hybrid hydrogel by the vapor diffusion method.     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

Facile Fabrication of Functional Polypyrrole Nanotubes via a Reactive Self‐Degraded Template

Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl₃ and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.

TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min.     

Spatioselective Modification of Bicompartmental Polymer Particles and Fibers via Huisgen 1,3‐Dipolar Cycloaddition

Precise nano‐ and microscale control of the architecture of biodegradable biomaterials is desirable for several biotechnological applications such as drug delivery, diagnostics, and medical imaging. Herein, we combine electrohydrodynamic co‐jetting and highly specific surface modification (via Huisgen 1,3‐dipolar cycloaddition) to prepare particles and fibers with spatioselective surface modification. We first prepared biphasic particles and fibers from commercial poly(lactide‐co‐glycolide) copolymers via electrohydrodynamic co‐jetting of two organic solutions loaded with fluorescent macromolecules and acetylene‐modified PLGA derivatives. (i) Spatially controlled reaction of poly[lactide‐co‐(propargyl glycolide)] with O‐(2‐aminoethyl)‐O′‐(2‐azidoethyl)heptaethylene glycol and (ii) subsequent conversion of the newly introduced amino groups with fluorescence probes resulted in particles and fibers with surface modification of one hemisphere only.

     

Solvent Controlled Multi‐Morphological Self‐Assembly of Amphiphilic Graft Copolymers

Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.

     

Blue‐Light‐Emitting Conjugated Polymers Derived From 2,7‐Carbazoles

Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.