Aggregation-Induced Emission Gold Clustoluminogens for Enhanced Low-Dose X-ray-Induced Photodynamic Therapy

The use of gold nanoparticles as radiosensitizers is an effective way to boost the killing efficacy of radiotherapy while drastically limiting the received dose and reducing the possible damage to normal tissues. Herein, we designed aggregation-induced emission gold clustoluminogens (AIE-Au) to achieve efficient low-dose X-ray-induced photodynamic therapy (X-PDT) with negligible side effects. The aggregates of glutathione-protected gold clusters (GCs) assembled through a cationic polymer enhanced the X-ray-excited luminescence by 5.2-fold. Under low-dose X-ray irradiation, AIE-Au strongly absorbed X-rays and efficiently generated hydroxyl radicals, which enhanced the radiotherapy effect. Additionally, X-ray-induced luminescence excited the conjugated photosensitizers, resulting in a PDT effect. The in vitro and in vivo experiments demonstrated that AIE-Au effectively triggered the generation of reactive oxygen species with an order-of-magnitude reduction in the X-ray dose, enabling highly effective cancer treatment.     

Silver Doping‐Induced Luminescence Enhancement and Red‐Shift of Gold Nanoclusters with Aggregation‐Induced Emission

A deep understanding on the luminescence property of aggregation‐induced emission (AIE) featured metal nanoclusters (NCs) is highly desired. This paper reports a systematic study on enhancing the luminescence of AIE‐featured Au NCs, which is achieved by Ag doping to engineer the size/structure and aggregation states of the Au^I‐thiolate motifs in the NC shell. Moreover, by prolonging the reaction time, the luminescence of the as‐synthesized AuAg NCs could be further tailored from orange to red, which is also due to the variation of the Au^I‐thiolate motifs of NCs. This study can facilitate a better understanding of this AIE‐featured luminescent probe and the design of other synthetic routes for this rising family of functional materials.     

Emergence of a Radical‐Stabilizing Metal–Organic Framework as a Radio‐photoluminescence Dosimeter

Radio‐photoluminescence (RPL) materials display a distinct radiation‐induced permanent luminescence center, and therefore find application in the detection of ionizing radiation. The current inventory of RPL materials, which were discovered by serendipity, has been limited to a small number of metal‐ion‐doped inorganic materials. Here we document the RPL of a metal–organic framework (MOF) for the first time: X‐ray induced free radicals are accumulated on the organic linker and are subsequently stabilized in the conjugated fragment in the structure, while the metal center acts as the X‐ray attenuator. These radicals afford new emission features in both UV‐excited and X‐ray excited luminescence spectra, making it possible to establish linear relationships between the radiation dose and the normalized intensity of the new emission feature. The MOF‐based RPL materials exhibit advantages in terms of the dose detection range, reusability, emission stability, and energy threshold. Based on a comprehensive electronic structure and energy diagram study, the rational design and a substantial expansion of candidate RPL materials can be anticipated.     

NIR‐II Driven Plasmon‐Enhanced Catalysis for a Timely Supply of Oxygen to Overcome Hypoxia‐Induced Radiotherapy Tolerance

Hypoxia, as a characteristic feature of solid tumor, can significantly adversely affect the outcomes of cancer radiotherapy (RT), photodynamic therapy, or chemotherapy. In this study, a strategy is developed to overcome tumor hypoxia‐induced radiotherapy tolerance. Specifically, a novel two‐dimensional Pd@Au bimetallic core–shell nanostructure (TPAN) was employed for the sustainable and robust production of O₂ in long‐term via the catalysis of endogenous H₂O₂. Notably, the catalytic activity of TPAN could be enhanced via surface plasmon resonance (SPR) effect triggered by NIR‐II laser irradiation, to enhance the O₂ production and thereby relieve tumor hypoxia. Thus, TPAN could enhance radiotherapy outcomes by three aspects: 1) NIR‐II laser triggered SPR enhanced the catalysis of TPAN to produce O₂ for relieving tumor hypoxia; 2) high‐Z element effect arising from Au and Pd to capture X‐ray energy within the tumor; and 3) TPAN affording X‐ray, photoacoustic, and NIR‐II laser derived photothermal imaging, for precisely guiding cancer therapy, so as to reduce the side effects from irradiation.     

Aggregation‐Induced Emission Properties of Copper Iodide Clusters

The aggregation‐induced emission (AIE) properties of two different copper iodide clusters have been studied. These two [Cu₄I₄L₄] clusters differ by their coordinated phosphine ligand and the luminescent mechanochromic properties are only displayed by one of them. The two clusters are AIE‐active luminophors that exhibit an intense emission in the visible region upon aggregation. The formed particles present luminescent thermochromism comparable to that of the bulk compounds. The observed AIE properties can be attributed to suppression of nonradiative relaxation of the excited states in a more rigid state, in relation to the large structural relaxation of the excited triplet state. The differences observed in the AIE properties of the two clusters can be related to the different ligands. A correlation between the luminescence mechanochromic properties and the AIE effect is not straightforward, but the formation of “soft” molecular solids is a common characteristic that can explain the photoactive properties of these compounds.     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

Towards meso‐Ester BODIPYs with Aggregation‐Induced Emission Properties: The Effect of Substitution Positions

Three meso‐ester boron dipyrromethene (BODIPY) dyes have been synthesized and functionalized with aggregation‐induced emission (AIE)‐active tetraphenylethene or triphenylethene moieties. It was found that functionalizing at the different positions of the BODIPY core resulted in the final dye having different emission properties in response to aggregation: from aggregation‐induced quenching (ACQ) to being AIE active. X‐ray crystallographic analysis was thus performed to provide an explanation for these differences.     

Mechanochromic Luminescence of Fluorenyl‐Substituted Ethylenes

It has been reported several times that some organic luminogens with aggregation‐induced emission (AIE) characteristics exhibit the abnormal phenomenon of crystallization‐induced blueshift fluorescence, which makes them suitable for utilization as luminescence color‐switching materials. Because of the attractive application potential and the numerous underlying structure–property relationships in such materials, we investigated a series of fluorenyl‐containing tetrasubstituted ethylenes for their novel optical properties and structural features. The dyes show morphology‐dependent luminescence. Their emission color can be switched between green and blue by means of mechanical grinding and solvent fuming. The transformation between crystalline and amorphous accounts for the luminescence changing. Through single‐crystal and X‐ray diffraction (XRD) analysis, the twisted molecular geometries and loose packing motifs in the crystalline samples are believed to be the intrinsic origin of the external‐stimuli‐induced structural transformation.     

Tunable Trimers: Using Temperature and Pressure to Control Luminescent Emission in Gold(I) Pyrazolate‐Based Trimers

A systematic investigation into the relationship between the solid‐state luminescence and the intermolecular Au???Au interactions in a series of pyrazolate‐based gold(I) trimers; tris(μ₂‐pyrazolato‐N,N′)‐tri‐gold(I) ( 1 ), tris(μ₂‐3,4,5‐ trimethylpyrazolato‐N,N′)‐tri‐gold(I) ( 2 ), tris(μ₂‐3‐methyl‐5‐phenylpyrazolato‐N,N′)‐tri‐gold(I) ( 3 ) and tris(μ₂‐3,5‐diphenylpyrazolato‐N,N′)‐tri‐gold(I) ( 4 ) has been carried out using variable temperature and high pressure X‐ray crystallography, solid‐state emission spectroscopy, Raman spectroscopy and computational techniques. Single‐crystal X‐ray studies show that there is a significant reduction in the intertrimer Au???Au distances both with decreasing temperature and increasing pressure. In the four complexes, the reduction in temperature from 293 to 100 K is accompanied by a reduction in the shortest intermolecular Au???Au contacts of between 0.04 and 0.08 Å. The solid‐state luminescent emission spectra of 1 and 2 display a red shift with decreasing temperature or increasing pressure. Compound 3 does not emit under ambient conditions but displays increasingly red‐shifted luminescence upon cooling or compression. Compound 4 remains emissionless, consistent with the absence of intermolecular Au???Au interactions. The largest pressure induced shift in emission is observed in 2 with a red shift of approximately 630 cm^?1 per GPa between ambient and 3.80 GPa. The shifts in all the complexes can be correlated with changes in Au???Au distance observed by diffraction.     

Ag/Au Alloy LSPR Engineering by Co‐deposition of RF‐Sputtering and RF‐PECVD

Silver‐Gold alloy/diamond like carbon (Ag‐Au/DLC) nanocomposite films were prepared by co‐deposition of RF‐sputtering and RF‐PECVD on glass substrates by using acetylene gas and silver‐gold target. The deposition process was carried out at room temperature in one minute with the variable parameters of initial pressures and RF powers. X‐ray diffraction analysis demonstrated the formation of Ag/Au alloy nanoparticles with a face‐centered cubic (FCC) structure. Localized surface plasmon and optical properties of Ag‐Au alloy nanoparticles were studied by UV‐visible spectrophotometry which showed that increasing RF power and initial pressure cause a redshift in all samples. Moreover, the effect of RF power and initial pressure on the size and shape of nanoparticles were studied by 2D Atomic force microscopy images. Energy dispersive X‐ray spectroscopy revealed the formation of Ag‐Au/DLC nanoparticles and the percentages of C, Ag, Au and O in all samples. The applied method for Ag/Au alloy preparation is the one step and low‐cost method which makes the samples ready for sensing application.     

Tumor‐Exocytosed Exosome/Aggregation‐Induced Emission Luminogen Hybrid Nanovesicles Facilitate Efficient Tumor Penetration and Photodynamic Therapy

The development of novel photosensitizing agents with aggregation‐induced emission (AIE) properties has fueled significant advances in the field of photodynamic therapy (PDT). An electroporation method was used to prepare tumor‐exocytosed exosome/AIE luminogen (AIEgen) hybrid nanovesicles (DES) that could facilitate efficient tumor penetration. Dexamethasone was then used to normalize vascular function within the tumor microenvironment (TME) to reduce local hypoxia, thereby significantly enhancing the PDT efficacy of DES nanovesicles, and allowing them to effectively inhibit tumor growth. The hybridization of AIEgen and biological tumor‐exocytosed exosomes was achieved for the first time, and combined with PDT approaches by normalizing the intratumoral vasculature as a means of reducing local tissue hypoxia. This work highlights a new approach to the design of AIEgen‐based PDT systems and underscores the potential clinical value of AIEgens.     

Strong Solid‐state Luminescence Enhancement in Supramolecular Assemblies of Polyoxometalate and “Aggregation‐Induced Emission”‐active Phospholium

Two new supramolecular fluorescent hybrid materials, combining for the first time [M₆O₁₉]^2? (M=Mo, W) polyoxometalates (POMs) and aggregation‐induced emission (AIE)‐active 1‐methyl‐1,2,3,4,5‐pentaphenyl‐phospholium ( 1⁺ ), were successfully synthesized. This novel molecular self‐assembling strategy allows designing efficient solid‐state emitters, such as (1)₂[W₆O₁₉] , by directing favorably the balance between the AIE and aggregation‐caused quenching (ACQ) effects using both anion‐π⁺ and H‐bonding interactions in the solid state. Combined single‐crystal X‐ray diffraction, Raman, UV‐vis and photoluminescence analyses highlighted that the nucleophilic oxygen‐enriched POM surfaces strengthened the rigidity of the phospholium via strong C?H???O contacts, thereby exalting its solid‐state luminescence. Besides, the bulky POM anions prevented π–π stacking interactions between the luminophores, blocking detrimental self‐quenching effects.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

Nanoscale Metal–Organic Layers for Deeply Penetrating X‐ray‐Induced Photodynamic Therapy

We report the rational design of metal–organic layers (MOLs) that are built from [Hf₆O₄(OH)₄(HCO₂)₆] secondary building units (SBUs) and Ir[bpy(ppy)₂]⁺‐ or [Ru(bpy)₃]²⁺‐derived tricarboxylate ligands (Hf‐BPY‐Ir or Hf‐BPY‐Ru; bpy=2,2′‐bipyridine, ppy=2‐phenylpyridine) and their applications in X‐ray‐induced photodynamic therapy (X‐PDT) of colon cancer. Heavy Hf atoms in the SBUs efficiently absorb X‐rays and transfer energy to Ir[bpy(ppy)₂]⁺ or [Ru(bpy)₃]²⁺ moieties to induce PDT by generating reactive oxygen species (ROS). The ability of X‐rays to penetrate deeply into tissue and efficient ROS diffusion through ultrathin 2D MOLs (ca. 1.2 nm) enable highly effective X‐PDT to afford superb anticancer efficacy.     

Highly Luminescent Inks: Aggregation‐Induced Emission of Copper–Iodine Hybrid Clusters

Aggregation‐induced emission (AIE) is an attractive phenomenon in which materials display strong luminescence in the aggregated solid states rather than in the conventional dissolved molecular states. However, highly luminescent inks based on AIE are hard to be obtained because of the difficulty in finely controlling the crystallinity of AIE materials at nanoscale. Herein, we report the preparation of highly luminescent inks via oil‐in‐water microemulsion induced aggregation of Cu–I hybrid clusters based on the highly soluble copper iodide‐tris(3‐methylphenyl)phosphine (Cu₄I₄(P‐(m‐Tol)₃)₄) hybrid. Furthermore, we can synthesize a series of AIE inks with different light‐emission colors to cover the whole visible spectrum range via a facile ligand exchange processes. The assemblies of Cu–I hybrid clusters with AIE characteristics will pave the way to fabricate low‐cost highly luminescent inks.     

Consideration of Molecular Structure in the Excited State to Design New Luminogens with Aggregation‐Induced Emission

Aggregation‐induced emission (AIE) is a photoluminescence phenomenon in which an AIE luminogen (AIEgen) exhibits intense emission in the aggregated or solid state but only weak or no emission in the solution state. Understanding the mechanism of AIE requires consideration of excited state molecular geometry (for example, a π twist). This Minireview examines the history of AIEgens with a focus on the representative AIEgen, tetraphenylethylene (TPE). The mechanisms of solution‐state quenching are reviewed and the crucial role of excited‐state molecular transformations for AIE is discussed. Finally, recent progress in understanding the relationship between excited state molecular transformations and AIE is overviewed for a range of different AIEgens.     

Mechanofluorochromic Materials Based on Aggregation‐Induced Emission‐Active Boron Ketoiminates: Regulation of the Direction of the Emission Color Changes

We report a series of mechanofluorochromic (MFC) compounds based on organoboron complexes with aggregation‐induced emission (AIE) characteristics. We synthesized a variety of boron ketoiminates and investigated the effect of the substituents on the optical properties by altering the end groups in the compounds. The synthesized boron ketoiminates showed AIE properties and MFC behavior. Interestingly, the hypsochromic and bathochromic shifts of the emission bands individually observed for boron ketoiminates depended on the chemical structures of the end groups. From the X‐ray diffraction and differential scanning calorimetry analyses, it was confirmed that the MFC property of boron ketoiminates should be derived from a phase transition between crystalline and amorphous states. In addition, the direction of the peak shifts of the emission bands was controlled by the degree of steric hindrance of the end group.     

Franck–Condon Blockade and Aggregation‐Modulated Conductance in Molecular Devices Using Aggregation‐Induced Emission‐Active Molecules

We report an effective modulation of the quantum transport in molecular junctions consisting of aggregation‐induced‐emission(AIE)‐active molecules. Theoretical simulations based on combined density functional theory and rate‐equation method calculations show that the low‐bias conductance of the junction with a single tetraphenylethylene (TPE) molecule can be completely suppressed by strong electron–vibration couplings, that is, the Franck‐Condon blockade effect. It is mainly associated with the low‐energy vibration modes, which is also the origin of the fluorescence quenching of the AIE molecule in solution. We further found that the conductance of the junction can be lifted by restraining the internal motion of the TPE molecule by either methyl substitution on the phenyl group or by aggregation, a mechanism similar to the AIE process. The present work demonstrates the correlation between optical processes of molecules and quantum transport in their junction, and thus opens up a new avenue for the application of AIE‐type molecules in molecular electronics and functional devices.     

Chiral Selective Chemistry Induced by Natural Selection of Spin‐Polarized Electrons

The search to understand the origin of homochirality in nature has been ongoing since the time of Pasteur. Previous work has shown that DNA can act as a spin filter for low‐energy electrons and that spin‐polarized secondary electrons produced by X‐ray irradiation of a magnetic substrate can induce chiral selective chemistry. In the present work it is demonstrated that secondary electrons from a substrate that are transmitted through a chiral overlayer cause enantiomeric selective chemistry in an adsorbed adlayer. We determine the quantum yields (QYs) for dissociation of (R)‐ or (S)‐epichlorohydrin adsorbed on a chiral self‐assembled layer of DNA on gold and on bare gold (for control). The results show that there is a significant difference in the QYs between the two enantiomers when adsorbed on DNA, but none when they are adsorbed on bare Au. We propose that the effect results from natural spin filtering effects cause by the chiral monolayer.