Synthesis of polyamides from active 1-benzotriazolyl diesters and diamines under mild conditions

The effect of the solvent on the inherent viscosity of polyamides was investigated in the polycondensation of new active 1-benzotriazolyl diesters, such as 1,1′-(adipolydioxy)bisbenzotriazole and 1,1′-(isophthaloyldioxy)bisbenzotriazole, with diamines. The preferred polymerization media were polar aprotic solvents, including N-methyl-2-pyrrolidone and hexamethylphosphoramide. The solution polycondensation at room temperature afforded a series of polyamides having inherent viscosities as high as 1.8 from both aliphatic and aromatic diamines. The 1-benzotriazolyl diesters were more reactive than di(2,4-dinitrophenyl) isophthalate toward diamines. Prior to polymer synthesis, the aminolysis of some active monoesters was carried out as a model compound study.     

Synthesis of polyamides from active O,O′-diacyl derivatives of N-hydroxy compounds and diamines under mild conditions

Two new routes to polyamides were established, based on the polycondensation of two new typical active diesters: the active diester of N-hydroxy-5-norbornene-2,3-dicarboximide, such as N,N′-(terephthaloyldioxy)bis(5-norbornene-2,3-dicarboximide), and the active diester of 3-hydroxy-4-oxo-3,4-dihydro-1,2,3-benzotriazine, such as 3,3′-(isophthaloyldioxy)bis(4-oxo-3,4-dihydro-1,2,3-benzotriazine) with diamines. The polycondensation occurred at room temperature in solution without added catalyst. Dipolar aprotic solvents which included dimethyl sulfoxide and N-methyl-2-pyrrolidone were used as solvents for polymerization. Before polymer synthesis the aminolysis of two active monoesters was carried out as a model compound study.     

Synthesis of inherently dissymmetric polyamides,

The preparation of polyamides from derivatives of optically active biphenic acid is described. The diacid chlorides chosen were 2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and 2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride, the diamines were phenyldiamines (o-, m-, p-) piperazine, trans-2,5-dimethylpiperazine, and 1,2-piperaazolidine. Polymerization was carried out by the method of interfacial polycondensation. The polymers of aromatic diamines were insoluble in common organic solvents but soluble in dimethylformamide containing 5% lithium chloride, triesters of phosphoric acid, and methanesulfonic acid. The polymers of aliphatic diamines were also insoluble in common organic solvents but soluble in trifluoroethanol. All polymers had melting points higher than 280°C.     

Synthesis and liquid crystal properties of bipyridine-containing aromatic polyamides

A series of novel aromatic polyamides containing 2,2′-bipyridine moiety were synthesized by polycondensation of 2,2′-bipyridine-5,5′-dicarboxylic acid ( 2 ) with various aromatic diamines in hexamethylphosphoramide (HMPA) containing lithium chloride. The resulting polyamide solutions in 98% sulfuric acid and in HMPA-LiCl exhibited lyotropic liquid crystal phases. The phase transition behaviors were studied by polarizing microscopy and X-ray diffraction. The polyamides also formed metal complexes with cis-dichlorobis(bipyridine)ruthenium dihydrate [cis-Ru(bpy)₂Cl₂ · 2H₂O] which was supported by changes in electronic spectra.     

Optical properties of inherently dissymmetric polyamides

A study of the optical rotatory dispersion (ORD), circular dichroism (CD), and ultraviolet spectra (UV) of polyamides derived from optically active biphenyl acid chlorides, and aromatic, and aliphatic diamines, was made. The optically active monomers were (–)-(S)-2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and (–)-(S)-2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride. The diamines were o-, m-, and p-phenylenediamine, piperazine, trans-2,5-dimethylpiperazine, and 1,2-pyrazolidine. The ORD spectra of the o-phenylenediaminepolyamide taken in different solvents indicated the existence of some ordered structure in the least polar solvent. All other polyamides existed in a random coil conformation in the solvents employed.     

Synthesis and properties of optically active aromatic polyimides derived from optically pure 1,1′-bi-2-naphthol

A series of new optically active aromatic polyimides containing axially dissymmetric 1,1′-binaphthalene-2,2-diyl units were prepared from optically pure (R)-(+)- or(S)-(−)-2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthalene dianhydrides and various aromatic diamines via a conventional two-step procedure that included ring-opening polycondensation and chemical cyclodehydration. The optically pure isomer of dianhydride was prepared by a nucleophilic substitution of optically pure (R)-(+)- or(S)-(−)-1,1′-bi-2-naphthol with 4-nitrophthalonitrile in aprotic polar solvent and subsequent hydrolysis of the resultant tetranitrile derivatives, followed by the dehydration of the corresponding tetracarboxylic acids to obtain the dianhydrides. These polymers were readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol, etc., and have glass transition temperatures of 251–296°C, and 5% weight loss occurs not lower than 480°C. The specific rotations of the optically active polyimides ranged from +196° to +263°, and the optical stability and chiroptical properties of them were also studied. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3287–3297, 1997     

Synthesis of polyamides from active 2-benzothiazolyl diesters and diamines under mild conditions

2-Benzothiazolyl benzoate as a model compound was successfully synthesized from the benzoylation of 2-benzothiazolone under kinetically controlled conditions. The aminolysis of 2-benzothiazolyl benzoate afforded excellent yields of N-substituted benzamides at room temperature in a short reaction time. Solution polycondensations of new active diesters, di-2-benzothiazolyl isophthalate and di-2-benzothiazolyl terephthalate, with aliphatic and aromatic diamines, took place rapidly even at room temperature and yielded polyamides with high molecular weight. The high reactivity of 2-benzothiazolyl benzoate was discussed in relation to intramolecular general base catalysis and the tautomeric effect of the benzothiazolone moiety.     

Synthesis and chirooptical properties of optically active poly(ester imide)s based on axially asymmetric 1,1′‐binaphthyls

A series of optically active poly(ester imide)s (PEsI's) has been synthesized by the polycondensation reactions of new axially asymmetric dianhydrides, that is, (R)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride and (S)‐2,2′‐bis(3,4‐dicarboxybenzoyloxy)‐1,1′‐binaphthyl dianhydride, and various diamines with aromatic, semiaromatic, and aliphatic structures. The polymers have inherent viscosities of 0.45–0.70 dL/g, very good solubility in common organic solvents, glass‐transition temperatures of 124–290 °C, and good thermal stability. Wide‐angle X‐ray crystallography of these polymers shows no crystal diffraction. In comparison with model compounds, an enhanced optical rotatory power has been observed for the repeat unit of optically active PEsI's based on aromatic diamines, and it has been attributed to a collaborative asymmetric perturbation of chiral 1,1′‐binaphthyls along the rigid backbones. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4318–4326, 2004     

Synthesis of furan dimer‐based polyamides with a high melting point

Polyamide composed of furan dimer, which is prepared from biomass‐derived organic molecule 2‐furfural, is synthesized. The reaction of 2,2′‐furan dimer 5,5′‐dicarbonyl chloride with several 1,ω‐diamines was carried out with a solution or interfacial polycondensation leading to the corresponding polyamide. Measurement of the melting point was performed resulting to exhibit a higher temperature compared with the related polyamide bearing a single furan ring composed of furan‐2,5‐dicarboxylic acid (FDCA). Thermal analyses (TG–DTA) also indicated higher temperatures of decomposition than those of FDCA‐derived polyamide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1516–1519     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Synthesis of 2,2′‐(p‐phenylene)bisbenzazoles compounds from terephthalohydroxamoyl chloride

In this study, synthesis of symmetric compounds of 2,2′‐(p‐phenylene)bisbenzothiazole, 2,2′‐(p‐phenyl‐ene)bisbenzimidazole and 5,5′‐dimethyl‐2,2′‐(p‐phenylene)bisbenzoxazole were benefited from the reaction of terephthalohydroxamoyl chloride with 2‐amino‐4‐methyl phenol, o‐aminothio phenol and o‐phenylenedi‐amin compounds. The structures of these compounds were confirmed by elemental analysis, mass, ¹H‐NMR and FT‐IR techniques.     

Synthesis of regioisomeric,stereoregular AABB-type polyamides from chiral diamines and diacids derived from natural amino acids

Two regioisomeric and stereoregular AABB-type polyamides have been synthesized using l-glutamic acid 1 and l-alaninol 4 as sources of chirality. From 4, two derivatives of chiral diamines were prepared and regioselectively condensed with pentachlorophenyl 5-oxo-(S)-2-tetrahydrofurancarboxylate 3, derived from 1. Manipulation of functional groups and convenient deprotections led to the ammonium salts of N-[1′-amino-(S)-2′-propyl]- and N-[(S)-2′-amino-1′-propyl]-5-oxo-(S)-2-tetrahydrofurancarboxyamide 11 and 15, respectively, in which the building blocks derived from 1 and 4 are linked through an amido group. Compounds 11 and 15 are, in fact, α,ω-amino acids having amino and lactone groups, and hence activated for polycondensation. Thus, polymerization of 11 took place under regio- and stereo-control to afford stereoregular poly[N-(1′-amino-(S)-2′-propyl)-carboxyamido-(S)-2-hydroxypentan-5-oic acid] (16). Similar polycondensation of 15, under the optimized conditions employed for the synthesis of 16, gave the regioisomeric polyamide 17, which exhibited a molecular weight lower than that of 16. The thermal and spectroscopic properties of optically active AABB-polyamides 16 and 17 are described.     

Synthesis and characterization of novel polyamide‐imides containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide‐dicarboxylic acid, 2,2′‐dimethyl‐4,4′‐bis(4‐trimellitimidophenoxy)biphenyl (DBTPB), containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by the condensation reaction of 2,2′‐dimethyl‐4,4′‐bis(4‐minophenoxy)biphenyl (DBAPB) with trimellitic anhydride in glacial acetic acid. A series of new polyamide‐imides were prepared by direct polycondensation of DBAPB and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP), using triphenyl phosphite and pyridine as condensing agents. The polymers were produced with high yield and moderate to high inherent viscosities of 0.86–1.33 dL · g⁻¹. Wide‐angle X‐ray diffractograms revealed that the polymers were amorphous. Most of the polymers exhibited good solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 224–302 °C and 10% weight loss temperatures in the range of 501–563 °C in nitrogen atmosphere. The tough polymer films, obtained by casting from DMAc solution, had a tensile strength range of 93–115 MPa and a tensile modulus range of 2.0–2.3 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 63–70, 2001     

Synthesis of polyamides from active N,N′-diacylbis-2-benzothiazolones and diamines under mild conditions

The aminolysis of N-benzoyl-2-benzothiazolone was studied in model systems and was found to give excellent yields of N-substituted benzamides at room temperature. Solution polycondensation of new bisamides, N,N′-adipoylbis-2-benzothiazolone and N,N′-isophthaloylbis-2-benzothiazolone, proceeded fairly slowly with both aromatic and aliphatic diamines at room temperature to yield polyamides having inherent viscosities up to 1.5. Hexamethylphosphoramide was the best polycondensation medium among some polar aprotic solvents for the formation of high molecular weight polyamides. The high reactivity of the N-acyl-2-benzothiazolones was discussed in relation to excellent leaving nature and intramolecular general base catalysis of the benzothiazolone moiety.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

C45 und C50-Carotinoide. 6. Mitteilung. Synthese eines optisch aktiven cyclischen C20-Bausteins und von Decaprenoxanthin (= (2R, 6R, 2′R, 6′R)-2,2′-Bis(4-hydroxy-3-methylbut-2-enyl)-ϵ, ϵ-carotin)

C₄₅- and C₅₀-Carotenoids: Synthesis of an Optically Active Cyclic C₂₀-Building Block and of Decaprenoxanthin ( = (2R, 6R, 2′R, 6′R)-2,2′-Bis(4-hydroxy-3-methylbut-2-enyl)-?, ?-carotene) The synthesis of the optically active cyclic C₂₀-building block (R, R) -15 and of the optically active C₅₀-carotenoid (2R, 6R, 2′R, 6′R)-decaprenoxanthin ( 1 ) starting from (-)-β-pinene ((S)- 2 ) is reported.     

Multiple Enantioselection by an Enzyme-Catalyzed Transacylation Reaction

Multiply enantioselective enzyme-catalyzed transacylation reactions are described. Two instances of triply enantioselective enzyme-catalyzed transacylations are 1) the reaction of rac-1-indanol with rac-1,1′-bi-2-naphthy]-2,2′-dibutyrate to afford (S)-1-indanoL (R)-1-indanylacetate, (S)-1,1′-bi-2-naphthyl-2,2′-diol, and (R)-1,1′-bi-2-naphthyl-2,2′-dibutyrate and 2) the reaction of rac-1-indanol with rac-2,2′-bis(butyroxymethyl)biphenyl to afford (S)-1-indanol, (R)-1-indanylbutyrate, (S)-2,2′-biphenyldimethanol, and (R)-2,2′-bis(butyroxy-methyl)biphenyl. Doubly enantioselective enzyme-catalyzed transacylations are described according to two instances: 1) the reaction of rac-1-indanol with rac-1,1′-bi-2-naphthyl-2-ol-2′-butyrate afforded (S)-1-indanol, (R)-1-indanylacetate, (S)-1,1′-bi-2-naphthyl-2,2′-diol, and (R)-1,1′-bi-2-naphthyl-2-ol-2′-butyrate, and 2) the reaction of rac-1-indanol with 1,3,5-O-methylidne-2,4,6-tri-O-butyrate-myo-inositol to afford (S)-1 -indanol, (R)-l-indanylbutyrate, and 1,3,5-O-methylidne-2,6-di-O-butyrate-myo-inositol. Multiply enantioselective enzyme-catalyzed reactions have a merit of the enhancement of enantiomeric excess over singly enantioselective ones.     

Synthesis and characterization of certain aromatic azopolyamides

Two new aromatic diamines, 2,2′-dimethyl-4,4′-diaminoazobenzene [benzenamine-(3,3′-dimethyl-4,4′-azobis)] and 2,2′-dichloro-4,4′-diaminoazobenzene [benzenamine-(3,3′-dichloro-4,4′-azobis)] were synthesized and their structures confirmed by IR, UV-visible, ¹H-NMR, ¹³C-NMR, and mass spectra. With these diamines, 16 aromatic polyamides were synthesized by both low-temperature solution and phosphorylation polycondensation methods. The polymers were characterized by viscosity, solubility, IR, UV visible, TGA, and DTA studies.     

Syntheses and characterizations of oligo(azomethine ether)s derived from 2,2′-[1,4-enylenebis (methyleneoxy)]dibenzaldehyde and 2,2′-[1,2-phenylenebis (methyleneoxy)]dibenzaldehyde

The oligo(azomethine ether)s were synthesized via polycondensation of alkyl diamines with aromatic dialdehydes. Two series of dialdehydes,namely 2,2’-[l,2-phenylenebis(methyleneoxy)]dibenzaldehyde[2,2’-l,2-(PBMODB)]and 2,2’- [l,4-phenylenebis(methyleneoxy)]dibenzaldehyde[2,2’-l,4-(PBMODB)]were prepared from the condensation reactions of salicylaldehyde with o-xylenedibromide and /7-xylenedibromide,respectively.The structures of dialdehydes and oligomers were determined by FT-IR,’ H-NMR and 13C-NMR.The thermal analyses of oligomers were conducted by DSC and TG/DTA techniques,respectively.Size exclusion chromatography(SEC) technique was also used to determine molecular weights and molecular weight distributions of oligomers.Electrochemical properties of the synthesized products were investigated.