o‐Carborane‐Based Anthracene: A Variety of Emission Behaviors

An o‐carborane‐based anthracene was synthesized, and single crystals, with incorporated solvent molecules, were obtained from the CHCl₃, CH₂Cl₂, and C₆H₆ solutions. The anthracene ring in the crystal is highly distorted by the formation of a π‐stacked dimer between the anthracene units. The crystals exhibited a variety of emission behaviors such as aggregation‐induced emission (AIE), crystallization‐induced emission (CIE), aggregation‐caused quenching (ACQ), and multichromism.     

Structure,stability, and disproportionation mechanisms of organic interhalides of the cholinium series: an experimental and theoretical study

The stability constants of acetylcholinium, carbamoylcholinium, and cholinium diiodochlorides and diiodobromides in chloroform solutions were determined and the kinetics of disproportionation of these systems in 1 : 9 CHCl₃—MeOH (MeCN) mixtures were studied by UV spectroscopy. A possible mechanism of mutual transformations of the polyhalides is proposed and an interrelation between the nature of the iodine-coordinating solvent and the extent of reversibility of the process is established. The electronic structures and relative stabilities of acetylcholinium iodohalides and charge-transfer complexes S·XI₂ ^– and S·I₂ (S = MeOH, MeCN, CHCl₃; X = Cl, Br, I) were studied by ab initio RHF and MP2(full) methods in the HW+(3d) and 6-31G++(d,p) basis sets. It was found that all the solvents studied favor the decomposition of the iodohalide anions to liberate molecular iodine; however, disproportionation of I₂ is possible only for the S·I₂ complexes with a high extent of charge transfer.     

Piperazine-based new sensor: selective ratiometric sensing of Fe3+, logic gate construction and cell imaging

Newly designed and synthesised chemosensor 1 selectively recognises Fe³⁺ ions in CHCl₃–MeOH (1:1, v/v) by showing ratiometric change in emission and green colouration of the solution under the exposure of UV light. The ensemble 1·Fe³⁺ selectively detects F^?  ions over other halides and the phenomenon is useful to construct combinatorial logic gate. Furthermore, the probe 1 can be used for in vitro detection of Fe³⁺ in human cervical cancer (HeLa) cells.     

Thermal properties of ternary systems: The calculation of the standard enthalpy of solution for compounds in binary mixtures

An equation free of fitting parameters is proposed for calculating the standard heats of solution for compounds in nonaqueous binary mixtures. The parameters of the equation are the standard heats of solution of a compound in the components of the mixed solvent. Nonlinear ΔH ⁰(x) trends are reconstructed for solutions of water in i-PrOH + MeOH and MeCN + MeOH, t-BuOH in MeCN + MeOH, squalane in CHCl₃ + CCl₄ and C₆H₆ + CHCl₃, and hexadecane in MeOH + i-Pr₂O and in mixtures of butyl acetate, ethyl acetate, and 1,4-dioxane with 1-octanol. The standard heats of solutions are calculated for water in alcohol + alcohol, alcohol + aprotic solvent, and aprotic solvent + aprotic solvent mixtures     

Synthesis of optically active conjugated polymers containing platinum in the main chain: Control of the higher‐order structures by substituents and solvents

The Sonogashira–Hagihara coupling polymerization of d ‐hydroxyphenylglycine‐derived diiodo monomers 1–4 and platinum‐containing diethynyl monomer 5 gave the corresponding polymers [poly( 1–5 )–( 2–5 )] with number‐average molecular weights of 19,000–25,000 quantitatively. The polymers were soluble in CHCl₃, CH₂Cl₂, THF, and DMF. CD and UV–vis spectroscopic analysis revealed that amide‐substituted polymers [poly( 1–5 ) and poly( 2–5 )] formed chiral higher‐order structures in solution, while ester‐substituted polymers [poly( 3–5 ) and poly( 4–5 )] did not. Poly( 1–5 ) formed one‐handed helices in THF/toluene mixtures, while it formed chiral aggregates in THF/MeOH mixtures. Poly( 1–5 ) emitted fluorescence with quantum yields ranging from 0.8 to 1.3%. The polymers usually aggregated in the solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2452–2461     

Photoresponsive Propeller-like Chiral AIE Copper(I) Clusters

A pair of propeller-like chiral trinuclear Cu^I clusters ( R/S-Cu3 ) with unique photoinduced fluorescence enhancement were prepared. R/S-Cu3 showed intense variable luminescence after UV light irradiation, which was attributed to the stepwise oxidation of ligand in the clusters. It exhibited typical aggregation-induced emission (AIE) (α_AIE=17.3). Mechanism studies showed that metal cluster-centered (MCC) and triplet metal-to-ligand charge-transfer (³MLCT) processes are the origin of the luminescence; the processes are regulated by a restriction of intramolecular motions mechanism in a different state. The chiral structure and AIE feature endow R/S-Cu3 with remarkable circularly polarized luminescence (g_lum=2×10⁻²) in the aggregated state. It shows good capability for producing reactive oxygen species. This work enriches the kinds of atomically precise AIE clusters, gains insight into their luminescence mechanism, and offers the prospect of application in multifunctional materials.     

Highly Emissive Boron Ketoiminate Derivatives as a New Class of Aggregation‐Induced Emission Fluorophores

A series of boron ketoiminate derivatives that exhibited clear aggregation‐induced emission (AIE) characteristics (in THF: Φ_PL≤0.01; in the solid state: Φ_PL=0.30–0.76) were prepared by the reactions of 1,3‐enaminoketone derivatives with boron trifluoride–diethyl etherate. The structures and optical properties were investigated by UV‐visible spectroscopy, photoluminescent (PL) spectroscopy, and X‐ray single‐crystal measurements. These results indicate that the AIE characteristics were derived from molecular motions of the boron‐chelating rings with a boron? nitrogen (B? N) bond. Furthermore, the optical properties were controllable by steric hindrance of the substituted groups on the nitrogen atom.     

Photoresponsive Propeller‐like Chiral AIE Copper(I) Clusters

A pair of propeller‐like chiral trinuclear Cu^I clusters ( R/S‐Cu3 ) with unique photoinduced fluorescence enhancement were prepared. R/S‐Cu3 showed intense variable luminescence after UV light irradiation, which was attributed to the stepwise oxidation of ligand in the clusters. It exhibited typical aggregation‐induced emission (AIE) (α_AIE=17.3). Mechanism studies showed that metal cluster‐centered (MCC) and triplet metal‐to‐ligand charge‐transfer (³MLCT) processes are the origin of the luminescence; the processes are regulated by a restriction of intramolecular motions mechanism in a different state. The chiral structure and AIE feature endow R/S‐Cu3 with remarkable circularly polarized luminescence (g_lum=2×10^?2) in the aggregated state. It shows good capability for producing reactive oxygen species. This work enriches the kinds of atomically precise AIE clusters, gains insight into their luminescence mechanism, and offers the prospect of application in multifunctional materials.     

Color Tuning of the Aggregation‐Induced Emission of Maleimide Dyes by Molecular Design and Morphology Control

Aggregation‐induced emission (AIE)‐active maleimide dyes, namely, 2‐p‐toluidino‐N‐p‐tolylmaleimide, 3‐phenyl‐2‐toluidino‐N‐p‐tolylmaleimide, 2‐p‐thiocresyl‐3‐p‐toluidino‐N‐p‐tolylmaleimide, and 2,3‐dithiocresyl‐N‐arylmaleimides, were synthesized by facile synthetic procedures. The dyes show intense emission in the solid state, and emission colors were controlled from green (λ_max=527 nm) to orange (λ_max=609 nm) by varying the substituents at the 2‐ and 3‐positions of the maleimide and the packing structures in the solid state. 2,3‐Disubstituted maleimide dyes effectively underwent redshifts of their emission wavelength. Furthermore, some of the dyes exhibited mechanochromism and polymorphism, and their emission properties were dramatically dependent on the morphology of the solid samples. The mechanisms of the emission behaviors were investigated by X‐ray diffraction. The substituent of the nitrogen atom of the maleimide ring affected the intermolecular interactions and short contacts, which were observed by single crystal X‐ray crystallography, to result in completely different emission properties.     

Study of molecular interaction in binary liquid mixtures of ethyl acetoacetate with chloroform and dimethylsulphoxide using excess acoustic parameters and spectroscopic methods

Densities and ultrasonic velocities were measured for binary liquid mixtures of ethyl acetoacetate (EAA) with chloroform (CHCl₃) and dimethylsulphoxide (DMSO) over the entire composition range. These experimental values were used to calculate the adiabatic compressibility (βs), intermolecular free length (L_f), excess molar volume (V^E), excess adiabatic compressibility (β_s^E) and excess intermolecular free length (L_f^E) for the liquid mixtures under consideration. In all the excess parameters, a positive deviation was observed in CHCl₃–EAA binary mixture, whereas a slight negative deviation was found for EAA–DMSO binary liquid mixture. These deviations were explained in terms of molecular interactions between like and unlike molecules and further affirmed by UV–Vis spectroscopic measurements in terms of polar and non-polar environment in the close proximity of solvatochromic dye. Fourier transform infrared spectroscopy (FT-IR) and proton-nuclear magnetic resonance (H¹ NMR) measurements have also been done to explain the molecular interaction in the binary liquid mixtures.     

Synthesis,Crystal Structure,and Photophysical Properties of (1E,3E,5E)‐1,3,4,6‐Tetraarylhexa‐1,3,5‐trienes: A New Class of Fluorophores Exhibiting Aggregation‐Induced Emission

Double Horner–Wadsworth–Emmons reaction of (E)‐2,3‐diaryl‐1,4‐bis(diethylphosphonyl)but‐2‐ene with (p‐substituted) benzaldehydes gave (1E,3E,5E)‐1,3,4,6‐tetraarylhexa‐1,3,5‐trienes in moderate to good yields. Substitution of electron‐withdrawing or ‐donating groups at the para position of the 1,6‐diphenyl groups induced a slight bathochromic shift of UV spectra measured in CHCl₃ compared with that of the parent 1,3,4,6‐tetraphenylhexa‐1,3,5‐triene. Although fluorescence was not observed with all the trienes in CHCl₃, they markedly emitted visible light in powder forms with quantum yields of 0.15–0.44. Introduction of amino groups at the para position of the 3,4‐diphenyl groups induced a bathochromic shift of emission maxima with good solid‐state quantum yields. Thus, the tetraarylated triene framework is found to serve as a new class of fluorophores that exhibit aggregation‐induced emission.     

Luminescent core–shell nanoparticles with crosslinked aggregation-induced emission core structures: Emission both in solution and solid states

Luminescent core–shell nanoparticles (NPs) with crosslinked aggregation-induced emission (AIE) core structures, which exhibited excellent emission independent of the dispersion state of the NPs, have been developed by a facile one-pot method based on the self-assembly of an amphiphilic block copolymer poly(PEGMA)-b-poly(DB3VT). Core–shell micelles with a poly(DB3VT) core were formed from poly(PEGMA)-b-poly(DB3VT) in tetrahydrofuran (THF)/H₂O condition, and the crosslinked AIE-based structure was selectively incorporated into the core by the Suzuki coupling reaction between poly(DB3VT) blocks and tetraphenylethylene (TPE)-based coupling monomers at the same time. This method afforded a uniform NP with a crosslinked TPE-based AIE core structure. The obtained NP exhibited excellent emission both in diluted solution and solid states. This result indicated that the formed TPE-based AIE core structure was always aggregated regardless of NP dispersion owing to the crosslinking as we expected. The crosslinked TPE-based AIE core structure, which was related to the emission property, was readily tuned by the selection and combination of coupling monomers in the Suzuki coupling reaction. By incorporating electron-deficient units into the core, the emission color could be successfully tuned from yellow-green to orange and red while maintaining the emission property independent of the state of the NP dispersion. These results demonstrated that NPs with the crosslinked AIE core structures are a promising luminescent material design motif to realize emission independent on molecular dispersion.     

Photoisomerization and Emission Properties of trans‐ and cis‐Poly(dimethylsilylenephenylenevinylene)s

The photoirradiation of trans‐ and cis‐poly(dimethylsilylenephenylenevinylene)s gave cis‐rich mixtures at equilibrium states. The degree of the photoisomerization could be exactly evaluated by comparing the UV spectra of the photoirradiated solutions with those of the trans and cis polymers. The geometric configuration of the trans and cis polymers was thermally stable and hardly changed even though they were heated. The trans and cis polymers exhibited different emission properties; e.g., trans polymer: λ_max = 400 nm, quantum yield = 3.4×10^–3; cis polymer: λ_max = 380 nm, quantum yield = 1.5×10^–3.     

Preparation and chemical properties of soluble π‐conjugated poly(aryleneethynylene) consisting of azabenzothiadiazole as the electron‐accepting unit

A soluble charge‐transfer type poly(aryleneethynylene), PAE‐AzaBzTdz , consisting of a highly electron‐accepting azabenzothiadiazole unit was prepared in 99% yield by palladium‐catalyzed polycondensation between 4,7‐dibromo‐2,1,3‐azabenzothiadiazole ( Br₂‐AzaBzTdz ) and 1,4‐diethynyl‐2,5‐didodecyloxybenzene. PAE‐AzaBzTdz showed a number‐average molecular weight, M_n, of 6000 in gel‐permeation chromatography analysis and had good thermal stability as measured by TGA. UV–vis spectrum of PAE‐AzaBzTdz exhibited an absorption peak at 529 nm in chloroform, and the absorption peak shifted to a longer wavelength (601 nm) in film. Addition of MeOH to a CHCl₃ solution of PAE‐AzaBzTdz led to aggregation of the polymer to form stable colloidal particles. Results of filtration experiments using 0.2 and 0.02 μm membranes supported aggregation of the polymer. Addition of trifluoroacetic acid (TFA) to a chloroform solution of PAE‐AzaBzTdz led to a red‐shift of the UV–vis peak from 529 to 640 nm. An X‐ray diffraction pattern of powdery PAE‐AzaBzTdz indicated that the polymer assumed a layer‐to‐layer stacked structure with an interlayer distance of 3.4 Å in the solid state. An X‐ray diffraction pattern of cast film of PAE‐AzaBzTdz revealed that the polymer molecules in the cast film were ordered on the surface of Pt plate with the dodecyl side chain oriented toward the surface of the Pt plate. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2975–2982, 2008     

Benzimidazolium-based new simple ratiometric fluorescent sensor for selective detection of dihydrogenphosphate

A series of pyridine-coupled benzimidazolium-based receptors 1, 2 and 3 have been designed and synthesised. In the series, only receptor 1 is structurally appealing in the selective recognition of H₂PO₄^?  in CHCl₃ as well as in CH₃CN over a series of other anions. The ratiometric change in emission with a triplet band at 420 nm is the distinctive feature of selective recognition of H₂PO₄^?  in CHCl₃. In CH₃CN, a ‘turn on’ response is selectively observed. Binding studies have been carried out using fluorescence, UV–vis, ¹H NMR and ³¹P NMR spectroscopic techniques. Experimental results have been correlated with the theoretical findings.     

Effect of the nature of inert solvent on the decay kinetics of the carbocation generated in the photolysis of 1,2-dihydroquinolines in methanol

The dependence of the quantum yield and the decay rate constant for the carbocation generated in the photolysis of 6-ethoxy-1,2,2,4-tetramethyl-1,2-dihydroquinoline (6-EtO-DHQ) in methanol on the solvent composition was studied in the mixtures of methanol with isopropanol, acetonitrile, and pentane by pulse photolysis. The addition of these solvents decreases the yield of the carbocation and differently affects the kinetic parameters of its decay. The carbocation decay in the mixtures MeOH-i-PrOH and MeOH-C₅H₁₂ is described by the pseudo-first order equation (k ₁), with the dependence of k ₁ having a maximum at 50 vol % of MeOH in the MeOH-i-PrOH mixtures, and k ₁ increasing with a decrease in the MeOH concentration in the MeOH-C₅H₁₂ mixtures. In the MeOH-MeCN mixtures, the value of k ₁ decreases with a decrease in the MeOH concentration, and, at the concentration of MeOH lower than 50 vol %, the contribution of the second-order reaction (k ₂) is observed. The activation energies and preexponential factors were determined in the MeOH-C₅H₁₂ mixtures of different compositions, and it was shown that E _act practically did not depend on the solvent composition and were close to E _act for other carbocations obtained in MeOH. The increase in k ₁ with a decrease in the MeOH concentration is caused by an increase in the preexponential factor. The results were discussed on the basis of the reaction mechanism involving the competing reactions of the carbocation combination with two nucleophilic particles, the MeOH molecule and the MeO⁻ anion. The composition of the mixture and the nature of the inert solvent affect strongly the course of these reactions. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 3, pp. 411–416. The article was translated by the authors.     

Effect of alcohol-water exchange and surface scanning on nanobubbles and the attraction between hydrophobic surfaces

4-(4′-Butoxyphenyl)phenyl-β-O-d-glucoside was synthesized as a low-molecular-mass gelator. It was able to immobilize a variety of aqueous and organic solvents in large amounts through the formation of three-dimensional self-assembled fibrillar networks. The morphologies of the aggregates depended on the nature of solvent where they were formed. Planar ribbons were observed in water, while helical ribbons were dominant in toluene and sheets in CHCl₃. The xerogel from water exhibited a lamellar structure with a d-spacing of 2.45 nm as demonstrated by 1D-WAXD, indicating a bilayer structure interdigitated with butoxy tails, whereas the xerogel from CHCl₃ or toluene yielded a lamellar structure with a d-spacing of 3.05 nm, implying a bilayer structure interdigitated with glycosyl heads. Increasing the content of 1,4-dioxane in water caused a gradual transformation from planar to twisted ribbons and then tubes.     

Synthesis and properties of polyacetylenes with salicylideneaniline groups

Acetylenes containing salicylideneaniline groups—N‐salicylidene‐3‐ethynylaniline ( 1 ), N‐(3‐t‐butylsalicylidene)‐3‐ethynylaniline ( 2 ), and N‐(3‐t‐butylsalicylidene)‐4‐ethynylaniline ( 3 )—polymerized smoothly and gave yellow to red polymers in excellent yields when a rhodium catalyst was employed. Polymers with alkyl substituents on the aromatic rings [poly( 2 ) and poly( 3 )] were soluble in CHCl₃, tetrahydrofuran, and so forth, whereas the polymer without alkyl substituents [poly( 1 )] was insoluble in any solvent. N‐(3‐t‐Butylsalicylidene)propargylamine did not provide any polymer. Thermogravimetric analyses of the resultant polymers exhibited good thermal stability (T_o, onset temperature of weight loss > 300 °C). The ultraviolet–visible spectra of the polymers showed absorption maxima and cutoff wavelengths around 360 and 520 nm, respectively. The polymers exhibited largely Stokes‐shifted fluorescence (emission wavelength ? 550 nm) upon photoexcitation at 350 nm, which resulted from the photoinduced intramolecular proton transfer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2458–2463, 2002     

Supramolecular Assembly of Bis(benzimidazole)pyridine: An Extended Anisotropic Ligand For Highly Birefringent Materials

Four new bis(benzimidazole)pyridine (BBP)‐containing compounds Zn(BBP)Cl[Au(CN)₂], Mn(BBP)[Au(CN)₂]₂?H₂O, Mn(BBP)Br₂(MeOH) and Mn(BBP)Cl₂(MeOH)?MeOH have been synthesized and structurally characterized and their birefringence values (Δn) determined. The structure of Zn(BBP)Cl[Au(CN)₂] contains a hydrogen‐bonded dimer of Zn(BBP)Cl[Au(CN)₂] units which propagate into a 1D chain through Au–Au interactions, although the crystals are of poor optical quality. The supramolecular structure of Mn(BBP)[Au(CN)₂]₂?H₂O forms a 1D coordination polymer through chains of Mn(BBP)[Au(CN)₂]₂ units, each containing one bridging Au(CN)₂ and one forming a 2D sheet through Au–Au interactions. The supramolecular structures of Mn(BBP)Br₂(MeOH) and Mn(BBP)Cl₂(MeOH)?MeOH are very similar, consisting of a complex hydrogen‐bonded network between NH imidazole, methanol and halide groups to align BBP building blocks. In the plane of the primary crystal growth direction, the birefringence values of the three Mn‐containing materials were Δn=0.08(1), 0.538(3) and 0.69(3), respectively. The latter two birefringence values are larger than in the related 2,2′;6′2′′‐terpyridine systems, placing them among the most birefringent solids reported. These compounds illustrate the utility of extending the π‐system of the building block and incorporating hydrogen‐bonding sites as design elements for highly birefringent materials and also illustrates the effect on the measurable birefringence of the crystal quality, growth direction and structural alignment of the anisotropic BBP building blocks.     

Novel illudalane sesquiterpenes from Encephalartos villosus Lehm. antimicrobial activity

Phytochemical investigation of Encephalartos villosus Lehm. leaves afford two new illudalane sesquiterpenes namely Encephaldiene 1 and Encephaldiene 2 together with four known flavone glycosides, Luteolin-7-rutinoside, Luteolin-7-glucoside, Luteolin-7-rhamnoside and Apigenin-7-glucoside. The structures of the isolated compounds were elucidated by means of spectroscopic methods including 1D and 2D NMR experiments along with HRESIMS spectrometry. Antimicrobial activity of CHCl₃ and MeOH extracts was investigated. Both extracts showed antibacterial activity against Gram-positive bacteria Streptococcus pneumonia and Bacillus subtilis, and antifungal activity against Aspergillus fumigatus. While CHCl₃ extract showed additional activity against Gram-negative bacteria Escherichia coli.