Do ionic and hydrophobic probes sense similar microenvironment in Triton X-100 nonionic reverse micelles?

Rotational diffusion of two structurally similar ionic probes, rhodamine 110 and fluorescein, has been examined in nonionic reverse micellar system of Triton X-100/benzene-n-hexane/water as a function of mole ratio of the water to surfactant, W. This study has been undertaken to find out whether ionic and hydrophobic probes experience similar microenvironment in these reverse micelles. Experimental results indicate that, from W=0 to 3, the average reorientation time, which is a measure of the microviscosity experienced by the probe molecule, increases by 90% and 40% for rhodamine 110 and fluorescein, respectively, and from W=3 to 8, it decreases by 20% for both the probes. The increase in the average reorientation time with W has been rationalized on the basis of the flexible oxyethylene chains of the TX-100 surfactant being hydrogen bonded by the water molecules, which makes the core region less fluid. However, once the hydration of the oxyethylene chains is complete, further addition of water results in formation of water droplet; which renders the micelle-water interface in the core region less compact leading to a marginal decrease in the average reorientation time of the probe molecules. These explanations are consistent with the location of the probes and the structure of the Triton X-100/benzene-hexane/water reverse micelles. To compare how the microenvironment experienced by these ionic probes is different from the hydrophobic ones, results from our earlier work [J. Phys. Chem. B 108, 7944 (2004)] have been considered. Such a comparison revealed that both ionic and hydrophobic probes experience similar microenvironment in these reverse micelles until the hydration of the oxyethylene chains is complete. In case of hydrophobic probes, however, the onset of water droplet formation does not alter their microenvironment, which is due to their location in the reverse micellar cores.     

Rotational diffusion of an ionic solute in polymorphic environments of a block copolymer: influence of interfacial friction on solute rotation

In an attempt to understand the role of interfacial friction on solute rotation, fluorescence anisotropy decays of a cationic solute, rhodamine 110, have been measured in polymorphic environments of a triblock copolymer, (PEO)20-(PPO)70-(PEO)20 (P123) (PEO = poly(ethylene oxide), PPO = poly(propylene oxide)). It has been noticed that even though rhodamine 110 is located in the interfacial region of the micelles, sol-gel transition does not significantly influence its rotation. Micelle-micelle entanglement, which is responsible for gelation, persists even in the micellar solution phase, perhaps to a lesser degree, and this entanglement is responsible for the observed behavior. This hypothesis has been substantiated by undertaking concentration-dependent studies in which it is shown that the reorientation time of the solute increases with an increase in the micellar concentration. In the case of reverse micelles, it has been observed that an enhancement in the water content facilitates solute rotation, which has been rationalized on the basis of solute migration from the hydrated poly(ethylene oxide) region to the poly(ethylene oxide)-water interface within the core.     

Orientational dynamics of water confined on a nanometer length scale in reverse micelles

The time-resolved orientational anisotropies of the OD hydroxyl stretch of dilute HOD in H(2)O confined on a nanometer length scale in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles are studied using ultrafast infrared polarization and spectrally resolved pump-probe spectroscopy, and the results are compared to the same experiments on bulk water. The orientational anisotropy data for three water nanopool sizes (4.0, 2.4, and 1.7 nm) can be fitted well with biexponential decays. The biexponential decays are analyzed using a wobbling-in-a-cone model that involves fast orientational diffusion within a cone followed by slower, full orientational relaxation. The data provide the cone angles, the diffusion constants for motion within the cones, and the final diffusion constants as a function of the nanopool size. The two processes can be interpreted as a local angular fluctuation of the OD and a global hydrogen bond network rearrangement process. The trend in the relative amplitudes of the long and short exponential decays suggest an increasing rigidity as the nanopool size decreases. The trend in the long decay constants indicates a longer hydrogen bond network rearrangement time with decreasing reverse micelle size. The anisotropy measurements for the reverse micelles studied extrapolate to approximately 0.33 rather than the ideal value of 0.4, suggesting the presence of an initial inertial component in the anisotropy decay that is too fast to resolve. The very fast decay component is consistent with initial inertial orientational motion that is seen in published molecular-dynamics simulations of water in AOT reverse micelles. The angle over which the inertial orientational motion occurs is determined. The results are in semiquantitative agreement with the molecular-dynamics simulations.     

Photophysics and locations of IR125 and C152 in AOT reverse micelles

Many fluorescent chromophores have been employed to investigate the nature and dynamics of the water confined in reverse micelles (RMs). However, some questions remain as to the location of a probe in a RM and the diameter of the RM at which the physical characteristic of the water inside RMs becomes similar to that of bulk water. In this work, we systematically studied the photophysics of IR125 and C152 in AOT RMs at different w(0) by means of static absorption and fluorescence spectroscopy as well as time-resolved fluorescence spectroscopy. We obtained the absorption maxima, fluorescence emission maxima, fluorescence lifetime, and reorientation time of IR125 and C152 in AOT RMs at corresponding w(0). We found that all obtained photophysical parameters of IR125 and C152 in AOT RMs as a function of w(0) have a distinct changeover point around w(0) = 8, indicating that there is a dramatic change in the nature of the water confined in AOT RMs around w(0) = 8. The observed changeover point around w(0) = 8 is well in agreement with the Satpati's report (ChemPhysChem, 2009, 10, 2966). In addition, we observed that the measured reorientation time of IR125 in AOT RMs increases with the increase of w(0), which is opposite to the trend of change in the measured reorientation time of C152 in AOT RMs with the increase of w(0). We found that IR125 prefers to reside in the water pool of AOT RMs and that C152 prefers to reside in the outer side of the interfacial region or the nonpolar n-heptane phase of AOT RMs. Furthermore, we found that the time-resolved fluorescence anisotropy of IR125 in smaller w(0) AOT RMs primarily measures the reorientation of RMs and the time-resolved fluorescence anisotropy of IR125 in larger w(0) AOT RMs measures the reorientation of IR125 in the water pool confined in RMs. This work demonstrated that IR125 is an excellent probe to study the nature and dynamics of the water confined in AOT RMs.     

Photophysical study of 3-acetyl-4-oxo-6,7-dihydro-12H-indolo[2,3-a]quinolizine in biomimetic reverse micellar nanocavities: a spectroscopic approach

Photophysical properties of 3-acetyl-4-oxo-6,7-dihydro-12H-indolo[2,3-a]quinolizine (AODIQ), a bioactive molecule, has been investigated in well-characterized, monodispersed biomimicking nanocavities formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in heptane using steady-state and picosecond time resolved fluorescence and fluorescence anisotropy. The emission behavior of AODIQ is very much dependent upon the water/surfactant mole ratio (W), i.e., on the water pool size of the reverse micellar core. AODIQ exhibits a sharp decrease in fluorescence anisotropy with increasing W, implying that the overall motional restriction experienced by the molecule is decreased with increased hydration. Some of the depth-dependent relevant fluorescence parameters, namely, fluorescence maxima and fluorescence anisotropy (r), have been monitored for exploiting the distribution and microenvironment around the probe in the reverse micelles. Fluorescence spectral position and fluorescence quenching studies suggest that the probe does not penetrate into the reverse micellar core; rather it binds at the interfacial region. Quantitaive estimates of the micropolarity and microviscosity at the binding sites of the probe molecule have been determined as a function of W.     

Rotational diffusion of organic solutes in surfactant-block copolymer micelles: role of electrostatic interactions and micellar hydration

Rotational diffusion of a cationic solute rhodamine 110 and a neutral solute 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole, DMDPP has been examined in the surfactant-block copolymer system of sodium dodecyl sulfate (SDS) and poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123). In this study, the mole ratio of SDS to P123 was varied from 0 to 5 in steps of one unit, to investigate the role of electrostatic interactions and micellar hydration on solute rotation. It has been noticed that there is a significant enhancement in the average reorientation time of rhodamine 110, when [SDS]/[P123] increased from 0 to 1. This has been rationalized on the basis of migration of rhodamine 110 from the interfacial region of P123 micelles to the palisade layer (corona region) due to the electrostatic interaction with negatively charged head groups of SDS, whose tails are embedded in the polypropylene oxide core. Further increase in the mole ratio of SDS to P123 has resulted in only a marginal decrease in the average reorientation time of rhodamine 110, which is probably due to the solute molecule experiencing a microenvironment similar to the interfacial region of SDS micelles. In contrast, a gradual decrease has been observed in the average reorientation time of DMDPP with [SDS]/[P123], which is due to the increase in hydration levels in the palisade layer (corona region) of the micelle. These explanations are consistent with the structure of the SDS-P123 micellar system that has been deduced from neutron scattering and viscosity measurements recently.     

混合反胶束的电导与微结构研究

反胶束是两亲分子在非极性溶剂中形成的一种有序组合体，在医药、化工、采油、胶束催化及酶催化等领域中有重要应用．与胶束溶液相比，人们对反胶束的形成与结构的了解至今仍不充分．特别是对于由混合表面活性剂形成的反胶束的研究几乎无人涉及．本文采用动态光散射、电导及荧光光谱等手段对阴离子表面活性剂AOT与非离子表面活性剂形成的混合反胶束进行了研究，旨在探讨利用表面活性剂的复配来调节和控制反胶束的结构和性能．亚实验部分二异辛基磺化琉璃酸钠（AOT，Sigma公司）；Brij30为含4个氧乙烯基（EO基）的十二碳醇（AcrosOrgani…     

An example of how to use AOT reverse micelle interfaces to control a photoinduced intramolecular charge-transfer process

6-Propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe due to its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer (ICT) states which can be particularly useful as sensors. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES), and time-resolved area normalized emission (TRANES) spectroscopies on PRODAN dissolved in nonaqueous reverse micelles. The reverse micelles are composed of polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane. Sequestered polar solvents included ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA). The experiments were performed with varying surfactant concentrations at a fixed molar ratio W(S) = [polar solvent]/[AOT]. In every reverse micelle studied, the results show that PRODAN undergoes a partition process between the external solvent and the reverse micelle interface. The partition constants, K(p), are quantified from the changes in the PRODAN emission and/or absorption spectra with the surfactant concentration. The K(p) values depend strongly on the encapsulated polar solvent and correlate quite well with the AOT reverse micelle interface's zones where PRODAN can exist and emits. Thus, the partition toward the reverse micelle interface is strongly favored in DMF and DMA containing micelles where the PRODAN emission comes only from an ICT state. For GY/AOT reverse micelles, the K(p) value is the lowest and only emission from the local excited (LE) state is observed. On the other hand, for EG/AOT, PG/AOT, and water/AOT reverse micelles, the K(p) values are practically the same and emission from both states (LE and ICT) is simultaneously detected. We show here that it is possible to control the PRODAN state emission by simply changing the properties of the AOT reverse micelle interfaces by choosing the appropriate polar solvent to make the reverse micelle media. Indeed, we present experimental evidence with the answer to the long time question about from which state does PRODAN emit, a process that can be controlled using the unique reverse micelle interfaces properties.     

How critical micelle temperature influences rotational diffusion of hydrophobic probes solubilized in aqueous triblock copolymer solutions

Rotational diffusion of two structurally similar hydrophobic probes, 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DMDPP) and 1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DPP), has been examined in aqueous solutions of poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 triblock copolymer as a function of temperature. These studies have been carried out to explore the influence of critical micelle temperature (cmt) on probe dynamics. It has been observed that, below cmt, the anisotropy decays can be adequately described by single-exponential functions with one time constant each for DMDPP and DPP. However, above cmt, biexponential functions with two time constants are needed to satisfactorily fit the anisotropy decays. Another important observation is that both the probes rotate more rapidly below the critical micelle temperature. The dynamics of the probe molecules are akin to that in a homogeneous solution below cmt, whereas above cmt, the rotational diffusion of the probes has been accounted by the two-step model, which is usually employed to explain the results in micelles. A comparison between the microviscosities of these micelles with other nonionic micelles such as Triton X-100 and Brij-35 reveals that the internal environment of the micelles formed with the triblock copolymer is less fluid.     

Influence of Confined Water on the Photophysics of Dissolved Solutes in Reverse Micelles

The photophysical parameters of two probes with largely different hydrophobic character, namely, coumarin 1 and coumarin 343, are investigated in sodium bis‐(2‐ethylhexyl)sulfosuccinate (AOT)/hexane/water reverse micelles at various water/AOT molar ratio w₀. Correlation of photophysical parameters such as fluorescence quantum yield, fluorescence lifetime, and emission maxima with w₀ indicate distinctly different trends below and above w₀≈7 for both probes. The variation of the average rotational correlation times obtained from fluorescence anisotropy decays for both probes in reverse micelles further corroborate the above observation. Similar studies were also performed in nonaqueous reverse micelles with acetonitrile as polar solvent. Similar to aqueous reverse micelles, breaks in the photophysical parameters with increasing acetonitrile/AOT molar ratios w′₀ were also observed in these cases, although at a much lower w′₀ value of 3. The present results indicate that around w₀≈7 for aqueous reverse micelles (and around w′₀≈3 for nonaqueous reverse micelles) a distinct change occurs in the probe microenvironment, which is rationalized on the basis of the relative populations of interfacial and core water. We propose that until the ionic head groups and counterions are fully solvated by polar solvents, that is, up to w₀≈7 (or w′₀≈3), the interfacial water population dominates. Above these molar ratios coalescence of excess water molecules with each other to form truncated H‐bonded water clusters leads to a sizable population of core water. This is further substantiated by changes in the IR absorption spectra for the O? D stretching mode of diluted D₂O in reverse micelles with varying w₀. Critical comparison of the present results with relevant literature reports provide clear support for the proposals made on water structure in reverse micelles. The role of relative size of the probe and the reverse micelles for differences in polar solvent to AOT ratios (w₀=7 and w′₀=3) in the observed breaks in the two types of reverse micelles is also discussed.     

Photophysical Methods for the Study of Sol-Gel Transition and Structure of Titania Gels

The sol to gel evolution of titania based systems in AOT (sodium 2-etil-hexil sulfosuccinate) reverse micelles is monitored by the fluorescence anisotropy of molecular probes located in the different phases of the system. In contrast with processes in homogeneous systems, hydrolysis and condensation reactions occur in different time windows. The obtained results allow to describe the location of the hydrolysis, the reorganisation of the surfactant and to predict the formation of precipitates.     

Correlating proton transfer dynamics to probe location in confined environments

The dramatic impact of differing environments on proton transfer dynamics of the photoacid HPTS prompted us to investigate these systems with two highly complementary methods: ultrafast time-resolved transient absorption and two-dimensional NMR spectroscopies. Both ultrafast time-resolved transient absorption spectroscopy and time-resolved anisotropy decays demonstrate the proton transfer dynamics depend intimately on the specific reverse micellar system. For w(0) = 10 reverse micelles formed with anionic AOT surfactant, the HPTS proton transfer dynamics are similar to dynamics in bulk aqueous solution, and the corresponding (1)H 2D NOESY NMR spectra display no cross peaks between HPTS and AOT consistent with the HPTS residing well hydrated by water in the interior of the reverse micelle water pool. In contrast, ultrafast transient absorption experiments show no evidence for HPTS photoinduced proton transfer reaction in reverse micelles formed with the cationic CTAB surfactant. In CTAB reverse micelles, clear cross peaks between HPTS and CTAB in the 2D NMR spectra show that HPTS embeds in the interface. These results indicate that the environment strongly impacts the proton transfer reaction and that complementary experimental techniques develop understanding of how location critically affects molecular responses.     

Aggregation Behaviors of Tricarbocyanine Dye in Water and in AOT Reverse Micelles

The photophysical property of the tricarbocyanine dye IR144 has been extensively studied in non‐aqueous solvents. However, as a potential near‐infrared biomedical imaging probe, the photophysical property of IR144 in water is still little known. So, the aggregation behaviors of IR144 in water with steady‐state absorption spectroscopy and integrated polarization dependent femtosecond pump‐probe spectroscopy were investigated. Through comparing the absorption spectral bandshape of IR144 in water and in water pool of AOT reverse micelles, It is found that IR144 form dimer aggregates in water even at very low concentration (<1.0×10^?7 mol·L^?1). And the absorption spectrum of the IR144 aggregates always displays a bimodal feature, which is independent of the dye concentration ranging from 1.0×10^?7 to 1.0×10^?4 mol·L^?1. For better understanding the aggregation behaviors of IR144 in water, we measured the ground state recovery kinetics and the reorientation kinetics of IR144 in water and in water pool of AOT reverse micelles (W₀=[H₂O]/[AOT], W₀=40). It is found that the fluorescence quantum yield of IR144 in water is lower than that in water pool of AOT reverse micelles, and the reorientation time of IR144 in water is slower than that in water pool of AOT reverse micelles. Those kinetic measurements also verify that IR144 exists as dimer aggregates in water.     

New insights on the photophysical behavior of PRODAN in anionic and cationic reverse micelles: from which state or states does it emit?

6-propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe because of its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer states (ICT) that can be particularly useful as a sensor. The nature of the emissive states has not yet been established despite the detailed experimental and theoretical investigations done on this fluorophore. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES) and time-resolved area normalized emission (TRANES) spectroscopies on the molecular probe PRODAN in the anionic water/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane and the cationic water/benzyl-n-hexadecyl dimethylammonium chloride (BHDC)/benzene reverse micelles (RMs). The experiments were done by varying the surfactant concentrations at a fixed molar ratio (W = [H2O]/[Surfactant]) and changing the water content at a constant surfactant concentration. The results obtained varying the surfactant concentration at W = 0 show a bathochromic shift and an increase in the intensity of the PRODAN emission band due to the PRODAN partition process between the external solvent and the RMs interface. The partition constants, Kp, are quantified from the changes in the PRODAN emission spectra and the steady-state anisotropy () with the surfactant concentration in both RMs. The Kp value is larger in the BHDC than the AOT RMs, probably due to the interaction between the cationic polar head of the surfactant and the aromatic ring of PRODAN. The partition process is confirmed with the TRES experiments, where the data fit to a continuous model, and with the time-resolved area normalized emission spectroscopy (TRANES) spectra, where only one isoemissive point is detected. On the other hand, the emission spectra at W = 10 and 20 show a dual fluorescence with a new band that emerges in the low-energy region of the spectra, a band that was previously assigned to the PRODAN emission from the water pool of RMs. Our studies demonstrate that this band is due to the emission from an ICT state of the molecular probe PRODAN located at the interface of the RMs. These results are also confirmed by the lifetime measurements, the TRES experiments where the results fit to a two-state model, and the time-resolved area normalized emission spectroscopy (TRANES) spectra where three or two isoemissive points are detected in the AOT and BHDC RMs, respectively. In the AOT RMs, Kp values obtained at W = 10 and 20 are almost independent of the water content; the values are higher for the BHDC RMs due to the higher micropolarity of this interface.     

Quantitating the association of charged molecules with ionic micelles

We have studied micelles comprised of cationic (CTAB) and anionic (SDS) surfactants through the interactions of solution phase anionic disodium fluorescein (DSF) and cationic rhodamine 110 (R110) dyes with perylene sequestered within the micelles. Fluorescence lifetime measurements monitor energy transfer between the nonpolar optical donor within the micelle and ionic probes in the surrounding solution. The efficiency of this process is mediated by the extent to which the ionic dyes interact with the micelle palisade layer, and our fluorescence lifetime data allow us to determine the association constants for acceptor-micelle interactions.     

Characterizing interfacial friction in bis(2-ethylhexyl) sodium sulfosuccinate reverse micelles from photoisomerization studies of carbocyanine derivatives

Photoisomerization of two carbocyanine derivatives has been examined in bis(2-ethylhexyl) sodium sulfosuccinate (AOT) reverse micelles to understand the factors that govern this process in the interfacial region of organized assemblies. To this effect, fluorescence lifetimes and quantum yields of 3,3(')-diethyloxadicarbocyanine iodide and merocyanine 540 have been measured in AOT∕isooctane∕water and AOT∕cyclohexane∕water reverse micellar systems as a function of the mole ratio of water to the surfactant, W. The nonradiative rate constants, which have been identified as the rates of photoisomerization for these solutes, were obtained from the experimentally measured parameters. The steady rise and subsequent saturation observed in the nonradiative rate constants upon increasing W has been rationalized in terms of micellar packing. An inverse correlation has been obtained between the nonradiative rate constants and the critical packing parameter, indicating that the interfacial friction experienced by the solute molecule is essentially described by this parameter.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Fluorescence resonance energy transfer-a spectroscopic probe for organized surfactant media

Dyes commonly used as biological labels have been used to probe resonance energy transfer in organized media. In neat water, energy transfer between the dye pairs fluorescein (donor):Nile red (acceptor) and acridine orange (donor):Nile red (acceptor) has a very low probability of occurrence. This study shows that the rate constant of energy transfer increases by more than an order of magnitude in organized surfactant media, viz., micelles and reverse micelles of the surfactant Triton X-100. The reverse micelles provide a better medium for energy transfer than the micelles. The energy transfer studies also provide an idea about the location and proximity of donor and acceptor dyes within the various organized media. Assuming Poissonian statistics for dye distribution, the donor-acceptor distances within micelles and reverse micelles are determined from energy transfer parameters. Acridine orange has been found to function better as a donor than fluorescein. This may be due to steric and electrostatic factors.     

Selective transport of amino acids into the gas phase: driving forces for amino acid solubilization in gas-phase reverse micelles

We report a study on encapsulation of various amino acids into gas-phase sodium bis(2-ethylhexyl) sulfosuccinate (NaAOT) reverse micelles, using electrospray ionization guided-ion-beam tandem mass spectrometry. Collision-induced dissociation of mass-selected reverse micellar ions with Xe was performed to probe structures of gas-phase micellar assemblies, identify solute-surfactant interactions, and determine preferential incorporation sites of amino acids. Integration into gas-phase reverse micelles depends upon amino acid hydrophobicity and charge state. For examples, glycine and protonated amino acids (such as protonated tryptophan) are encapsulated within the micellar core via electrostatic interactions; while neutral tryptophan is adsorbed in the surfactant layer. As verified using model polar hydrophobic compounds, the hydrophobic effect and solute-interface hydrogen-bonding do not provide sufficient driving force needed for interfacial solubilization of neutral tryptophan. Neutral tryptophan, with a zwitterionic structure, is intercalated at the micellar interface between surfactant molecules through complementary effects of electrostatic interactions between tryptophan backbone and AOT polar heads, and hydrophobic interactions between tryptophan side chain and AOT alkyl tails. Protonation of tryptophan could significantly improve its incorporation capacity into gas-phase reverse micelles, and displace its incorporation site from the micellar interfacial zone to the core; protonation of glycine, on the other hand, has little effect on its encapsulation capacity. Another interesting observation is that amino acids of different isoelectric points could be selectively encapsulated into, and transported by, reverse micelles from solution to the gas phase, based upon their competition for protonation and subsequent encapsulation within the micellar core.     

The use of acridine orange base (AOB) as molecular probe to characterize nonaqueous AOT reverse micelles

The behavior of acridine orange base (AOB) in nonaqueous reverse micelles composed of n-heptane/AOT/polar solvent has been performed. Ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA) were employed as water substitutes. The studies were performed by static and time-resolved emission spectroscopy. Thus, the distribution of AOB between the two pseudophases of the aggregates was quantified by measuring the partition constants from emission spectra at different surfactant concentration. Similar values to those obtained by means of absorption spectroscopy were obtained. This match is indicating that AOB is not experiencing partition during the lifetime of the excited state. Partitioning to the micelles is strongly favored in micelles containing hydrogen-bond donor (HBD) solvents rather than non-HBD solvents. Variations of fluorescence lifetimes with AOT concentration confirm these results. By the solvatochromic behavior of AOB in the different systems it is shown that the microenvironment at the interface is distinct from that of the bulk polar solvent, indicating that the probe senses no "free" solvent. The steady state anisotropy (r) was measured for EG/AOT/n-heptane and DMF/AOT/n-heptane systems as representatives for HBD and non-HBD polar solvents, respectively. The value of r is higher in the micelles containing EG than that obtained with DMF, and increases with AOT concentration. This is explained as due to highly structured polar solvents in the inner core. EG is interacting with the polar heads of AOT through hydrogen-bond interaction, while DMF can only interact with the Na+ counterions. This is confirmed by the time-resolved emission spectra (TRES) of the probe in the micellar systems, in comparison with the bulk solvents.