Increasing solubility and stability of linear tricobalt(II) chains with depa (diethyldipyridylamide) ligands

A new and more basic ligand has been used to make two new tricobalt extended metal atom chains (EMACs), namely, Co(3)(depa)(4)Cl(2), 3, and Co(3)(depa)(4)(CN)(2), 4. The depa ligand is di(4-ethyl-2-pyridyl)amide, a useful modification of the well-known di(2-pyridyl)amide, dpa, ligand. The new compounds have been thoroughly characterized, and informative comparisons are made of 3 with Co(3)(dpa)(4)Cl(2), 1, and 4 with Co(3)(dpa)(4)(CN)(2), 2, which were described several years ago. Introduction of the eight ethyl groups into the trimetal compounds improves solubility, makes oxidations easier, and allows for a more complete examination of the magnetic susceptibility as a function of temperature for 3 than was possible for 1. The data clearly indicate that the upper state for 3 has S = (3)/(2) and suggest that this is the case for 1 as well.     

New trinuclear metal string complexes containing rigid Hdzp ligands: synthesis, structure, magnetism and DFT calculation (Hdzp = 1,9-diazaphenoxazine)

The synthesis, crystal structure, magnetic properties, and single-molecule conductance of two new trinuclear metal string complexes, [Ni(3)(dzp)(4)(NCS)(2)] (2) and [Co(3)(dzp)(4)(NCS)(2)] (3), containing the rigid Hdzp ligand (1, 1,9-diazaphenoxazine) are reported. X-ray structural analyses show that compounds 2 and 3 exhibit smaller torsion angles and longer metal-metal distances than those exhibited by the corresponding dpa(-) analogues (dpa(-) = dipyridylamido anion) due to the rigidity of Hdzp ligands. The longer metal-metal distance observed for 2 and 3 results in variations in their magnetic properties. The exchange interaction (J = -160 cm(-1)) between two high spin (HS) Ni(II) ions in 2 decreases slightly in comparison with those of trinickel dpa(-) analogues. The doublet-quartet gap of 3 is smaller than that of [Co(3)(dpa)(4)(NCS)(2)] (4), which causes compound 3 to show spin-crossover behavior even at low temperature.     

Pentanuclear cyanide-bridged complexes based on highly anisotropic Co(II) seven-coordinate building blocks: synthesis, structure, and magnetic behavior

Pentagonal-bipyramidal complexes [Co(DABPH)X(H(2)O)]X [X = NO(3) (1), Br (2), I (3)] were synthesized, and their magnetic behavior was investigated. Simulation of the magnetization versus temperature data revealed the complexes to be highly anisotropic (D ≈ +30 cm(-1)) and the magnitude of the anisotropy to be independent of the nature of the axial ligands. The reaction of 1 with K(3)[M(CN)(6)] (M = Cr, Fe) produces the pentametallic clusters [{Co(DABPH)}(3){M(CN)(6)}(2)(H(2)O)(2)] [M = Cr (4), Fe (5)]. Both clusters consist of three {Co(DABPH)} moieties separated by two {M(CN)(6)} fragments. In 4, the central and terminal Co(II) ions are bound to cyanide groups cis to one another on the bridging {Cr(CN)(6)}, whereas in 5, the connections are via trans cyanide ligands, resulting in the zigzag and linear structures observed, respectively. Magnetic investigation revealed ferromagnetic intramolecular interactions; however, the ground states were poorly isolated because of the large positive local anisotropies of the Co(II) ions. The effects of the local anisotropies appeared to dominate the behavior in 5, where the magnetic axes of the Co(II) ions were approximately colinear, compared to 4, where they were closer to orthogonal.     

Oxidation of linear trinuclear ruthenium complexes [Ru(3)(dpa)(4)Cl(2)] and [Ru(3)(dpa)(4)(CN)(2)]: synthesis, structures, electrochemical and magnetic properties

The neutral, monocationic, and dicationic linear trinuclear ruthenium compounds [Ru(3)(dpa)(4)(CN)(2)], [Ru(3)(dpa)(4)(CN)(2)][BF(4)], [Ru(3)(dpa)(4)Cl(2)][BF(4)], and [Ru(3)(dpa)(4)Cl(2)][BF(4)](2) (dpa=the anion of dipyridylamine) have been synthesized and characterized by various spectroscopic techniques. Cyclic voltammetric and spectroelectrochemical studies on the neutral and oxidized compounds are reported. These compounds undergo three successive metal-centered one-electron-transfer processes. X-ray structural studies reveal a symmetrical Ru(3) unit for these compounds. While the metal--metal bond lengths change only slightly, the metal--axial ligand lengths exhibit a significant decrease upon oxidation of the neutral complex. The electronic configuration of the Ru(3) unit changes as the axial chloride ligands are replaced by the stronger "pi-acid" cyanide axial ligands. Magnetic measurements and (1)H NMR spectra indicate that [Ru(3)(dpa)(4)Cl(2)] and [Ru(3)(dpa)(4)Cl(2)][BF(4)](2) are in a spin state of S=0 and [Ru(3)(dpa)(4)Cl(2)][BF(4)], [Ru(3)(dpa)(4)(CN)(2)], and [Ru(3)(dpa)(4)(CN)(2)][BF(4)] are in spin states of S=1/2, 1, and 3/2, respectively. These results are consistent with molecular orbital (MO) calculations.     

Synthesis, characterization and thermal properties of trimetallic N3-Cr[quadruple bond]Cr···M-N3 azide complexes with M = Cr, Mn, Fe, and Co

We report here two novel synthetic pathways toward the preparation of a family of trimetallic diazide compounds of the type Cr(2)M(dpa)(4)(N(3))(2), with M = Cr (10), Mn (4), Fe (5), and Co (11). Reaction of either Cr(2)M(dpa)(4)(OTf)(2) (for M = Mn and Fe) or [Cr(2)M(dpa)(4)(MeCN)(2)](PF(6))(2) (for M = Cr and Co) with sodium azide in methanol leads to the formation of the corresponding diazide compounds, and single crystal X-ray diffraction measurements confirm the predicted structures. Compounds 4, 5, and 10 are all high-spin compounds, but 11 is a spin-crossover compound exhibiting low-spin behavior at low temperatures (~100 K). Thermolytic characterization by DSC and TGA reveals an exothermic reaction corresponding to the loss of two dinitrogen molecules from compounds 5, 10, and 11. Further characterization by solution NMR measurements and cyclic voltammetry are also presented.     

Porous anionic, cationic, and neutral metal-carboxylate frameworks constructed from flexible tetrapodal ligands: syntheses, structures, ion-exchanges, and magnetic properties

A series of coordination polymers with anionic, cationic, and neutral metal-carboxylate frameworks have been synthesized by using a flexible tetrapodal ligand tetrakis[4-(carboxyphenyl)oxamethyl] methane acid (H(4)X). The reactions between divalent transition-metal ions and H(4)X ligands gave [M(3)X(2)]·[NH(2)(CH(3))(2)](2)·8DMA (M = Co (1), Mn (2), Cd(3)) which have anionic metal-carboxylate frameworks with NH(2)(CH(3))(2)(+) cations filled in channels. The reactions of trivalent metal ions Y(III), Dy(III), and In(III) with H(4)X ligands afforded cationic metal-carboxylate frameworks [M(3)X(2)·(NO(3))·(DMA)(2)·(H(2)O)]·5DMA·2H(2)O (M = Y(4), Dy(5)) and [In(2)X·(OH)(2)]·3DMA·6H(2)O (6) with the NO(3)(-) and OH(-) serving as counterions, respectively. Moreover, a neutral metal-carboxylate framework [Pb(2)X·(DMA)(2)]·2DMA (7) can also be isolated from reaction of Pb(II) and H(4)X ligands. The charged metal-carboxylate frameworks 1-5 have selectivity for specific counterions in the reaction system, and compounds 1 and 2 display ion-exchange behavior. Moreover, magnetic property measurements on compounds 1, 2, and 5 indicate that there exists weak antiferromagnetic interactions between magnetic centers in the three compounds.     

Cyano-bridged Mn(III)-M(III) single-chain magnets with M(III)=Co(III), Fe(III), Mn(III), and Cr(III)

A series of isostructural cyano-bridged Mn(III)(h.s.)-M(III)(l.s.) alternating chains, [Mn(III)(5-TMAMsalen)M(III)(CN)(6)]?4H(2)O (5-TMAMsalen(2-)=N,N'-ethylenebis(5-trimethylammoniomethylsalicylideneiminate), Mn(III)(h.s.)=high-spin Mn(III), M(III)(l.s.)=low-spin Co(III), Mn-Co; Fe(III), Mn-Fe; Mn(III), Mn-Mn; Cr(III), Mn-Cr) was synthesized by assembling [Mn(III)(5-TMAMsalen)](3+) and [M(III)(CN)(6)](3-). The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [-Mn(III)-NC-M(III)-CN-] repeating motif, for which the -NC-M(III)-CN- motif is provided by the [M(III)(CN)(6)](3-) moiety adopting a trans bridging mode between [Mn(III)(5-TMAMsalen)](3+) cations. The Mn(III) and M(III) ions occupy special crystallographic positions: a C(2) axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn-Teller axis of the Mn(III)(h.s.) ion is perpendicular to the N(2)O(2) plane formed by the 5-TMAMsalen tetradentate ligand. These Jahn-Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn-N(axis) -C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter-chain M???M distance being relatively large at 9?? due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5-TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn-Fe and Mn-Mn display intra-chain ferromagnetic interactions, whereas Mn-Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single-chain magnet (SCM) behavior of these three systems, whereas Mn-Co is merely paramagnetic with S(Mn)=2 and D/k(B)=-5.3?K (D being a zero-field splitting parameter). At low temperatures, the Mn-M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite-chain and finite-chain regimes for the SCM behavior. These isostructural hetero-spin SCMs offer a unique series of alternating [-Mn-NC-M-CN-] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Incorporation of substitutionally labile [V(III)(CN)6]3- into prussian blue type magnetic materials

A Prussian blue (PB) type material containing hexacyanovanadate(III), Mn(II)1.5[V(III)(CN)6].(0.30)MeCN (1), was formed from the reaction of [V(III)(CN)6](3-) with [Mn(NCMe)6](2+) in MeCN. This new material exhibits ferrimagnetic spin- or cluster-glass behavior below a Tc of 12K with observed magnetic hysteresis at 2 K (Hcr = 65 Oe and Mrem = 730 emu.Oe/mol). Reactions of [V(III)(CN)6](3-) with [M(II)(NCMe)6](2+) (M = Fe, Co, Ni) in MeCN lead to either partial (M = Co) or complete (M = Fe, Ni) linkage isomerization, resulting in compounds of Fe(II)(0.5)V(III)[Fe(II)(CN)6].(0.85)MeCN (2), (NEt4)(0.10)Co(II)(1.5- a)V(II)a[Co(III)(CN)6]a [V(III)(CN)6](1-a)(BF4)(0.10).(0.35)MeCN (3), and (NEt4)(0.20)V(III)[Ni(II)(CN)4](1.6).(0.10)MeCN (4) compositions. Compounds 2-4 do not magnetically order as a consequence of diamagnetic cyanometalate anions being present, i.e., [Fe(II)(CN)6](4-), [Co(III)(CN)6](3-), and [Ni(II)(CN)4](2-). Incorporation of [V(III)(CN)6](3-) into PB-type materials is synthetically challenging because of the lability of the cyanovanadate(III) anion.     

Conducting dimerized cobalt complexes with tetrathiafulvalene dithiolate ligands

To obtain novel single-component molecular metals, we attempted to synthesize several cobalt complexes coordinated by TTF (tetrathiafulvalene)-type dithiolate ligands. We succeeded in the syntheses and structure determinations of ((n)Bu(4)N)(2)[Co(chdt)(2)](2) (1), ((n)Bu(4)N)(2)[Co(dmdt)(2)](2) (2), [Co(dmdt)(2)](2) (3), and [Co(dt)(2)](2) (4) (chdt = cyclohexeno-TTF-dithiolate, dmdt = dimethyl-TTF-dithiolate, and dt = TTF-dithiolate). Structure analyses of complexes 1-4 revealed that two monomeric [Co(ligand)2]- or [Co(ligand)(2)](0) units are connected by two Co-S bonds resulting in dimeric [Co(ligand)(2)](2)(2-) or [Co(ligand)(2)](2) molecules. Complex 1 has a cation-anion-intermingled structure and exhibited Curie-Weiss magnetic behavior with a large Curie constant (C = 2.02 K x emu x mol(-1)) and weak antiferromagnetic interactions (theta = -8.3 K). Complex 2 also has a cation-anion-intermingled structure. However, the dimeric molecules are completely isolated by cations. Complexes 3 and 4 are single-component molecular crystals. The molecules of complex 3 form two-dimensional molecular stacking layers and exhibit a room-temperature conductivity of sigmart = 1.2 x 10(-2) S.cm(-1) and an activation energy of E(a) = 85 meV. The magnetic behavior is almost consistent with Curie-Weiss law, where the Curie constant and Weiss temperature are 8.7 x 10(-2) K x emu x mol(-1) and -0.85 K, respectively. Complex 4 has a rare chair form of the dimeric structure. The electrical conductivity was fairly large (sigmart = 19 S.cm(-1)), and its temperature dependence was very small (sigma(0.55K)/sigma(rt) = ca. 1:10), although the measurements were performed on the compressed pellet sample. Complex 4 showed an almost constant paramagnetic susceptibility (chi(300) (K) = 3.5 x 10(-4) emu x mol(-1)) from 300 to 50 K. The band structure calculation of complex 4 suggested the metallic nature of the system. Complex 4 is a novel single-component molecular conductor with a dimeric molecular structure and essentially metallic properties down to very low temperatures.     

Crystal structures and magnetic properties of two octacyanotungstate(IV) and (V)-cobalt(II) three-dimensional bimetallic frameworks

The synthesis, X-ray structures, and magnetic behavior of two new, three-dimensional compounds [W(IV)[(mu-CN)(4)Co(II)(H(2)O)(2)](2).4H(2)O](n) (1) and [[W(V)(CN)(2)](2)[(mu-CN)(4)Co(II)(H(2)O)(2)](3).4H(2)O](n) (2) are presented. Compound 1 crystallizes in the tetragonal system, space group I4/m with cell constants a = b = 11.710(3) A, c = 13.003(2) A, and Z = 4, whereas 2 crystallizes in the orthorhombic system, space group Cmca with cell constants a = 13.543(5) A, b = 16.054(6) A, c = 15.6301(9) A, and Z = 4. The structure of 1 shows alternating eight-coordinated W(IV) and six-coordinated Co(II) ions bridged by single cyanides in a three-dimensional network. The geometry of each [W(IV)(CN)(8)](4-) entity in 1 is close to a square antiprism. Its eight cyanide groups are coordinated to Co(II) ions which have two coordinated water molecules in trans position. The structure of 2 consists of alternating eight-coordinated W(V) and six-coordinated Co(II) ions linked by single cyanide bridges in a three-dimensional network. Each [W(V)(CN)(8)](3-) unit shows a geometry close to a square antiprism. Only six of its eight cyanide groups are coordinated to Co(II) ions while the other two are terminal. The Co(II) ion in 2 has the same CoN(4)O(2) environment as in 1. The magnetic behavior of 1 is that of magnetically isolated high spin Co(II) ions (S(Co) = 3/2), bridged by the diamagnetic [W(IV)(CN)(8)](3-) units (S(W(IV)) = 0). The magnetic behavior of 2, where the high spin Co(II) ions are bridged by the paramagnetic [W(V)(CN)(8)](3-) units [S(W(V)) = 1/2], is that of ferromagnetically coupled Co(II) and W(V) giving rise to an ordered ferromagnetic phase below 18 K. The magnetic properties of 1 are used as a blank to extract the parameters that are useful to analyze the magnetic data of compound 2.     

Enhancing the stability of trinickel molecular wires and switches: Ni(3)(6+)/Ni(3)(7+)

This paper describes in detail four new compounds that contain extended metal atom chains (EMACs) of three nickel atoms wrapped by either di(2-pyridyl)amide (dpa) or the new homologous ligand with an ethyl group at the para position of each pyridyl group, depa, and compares them to the precursor Ni(3)(dpa)(4)Cl(2) (1) and the oxidized and rather unstable Ni(3)(dpa)(4)(PF(6))(3) (2). The new molecules are Ni(3)(depa)(4)Cl(2) (3), Ni(3)(depa)(4)(PF(6))(3) (4), [Ni(3)(dpa)(4)(CH(3)CN)(2)](PF(6))(2) (5), and [Ni(3)(depa)(4)(CH(3)CN)(2)](PF(6))(2) (6). These compounds are fully described as to preparation, elemental composition, structure, infrared spectra, (1)H NMR spectra (where possible), electrochemistry, magnetic susceptibility, and an EPR spectrum for 4. The effects of (a) introducing the ethyl substituents on the ligands, (b) replacing axial anions by neutral axial ligands, and (c) oxidizing the Ni(3) chains are reported and discussed. The point of major interest is how oxidation profoundly alters the electronic structure of the EMAC.     

Magnetism of cyano-bridged hetero-one-dimensional Ln3+-M3+ complexes (Ln3+ = Sm,Gd, Yb; M3+ = FeLS,Co)

The reaction of Ln(NO(3))(3).aq with K(3)[Fe(CN)(6)] or K(3)[Co(CN)(6)] and 2,2'-bipyridine in water led to five one-dimensional complexes: trans-[M(CN)(4)(mu-CN)(2)Ln(H(2)O)(4) (bpy)](n)().XnH(2)O.1.5nbpy (M = Fe(3+) or Co(3+); Ln = Sm(3+), Gd(3+), or Yb(3+); X = 4 or 5). The structures for [Fe(3)(+)-Sm(3+)] (1), [Fe(3)(+)-Gd(3+)] (2), [Fe(3)(+)-Yb(3+)] (3), [Co(3)(+)-Gd(3+)] (4), and [Co(3)(+)-Yb(3+)] (5) have been solved; they crystallize in the triclinic space P1 and are isomorphous. The [Fe(3+)-Sm(3+)] complex is a ferrimagnet, its magnetic studies suggesting the onset of weak ferromagnetic 3-D ordering at 3.5 K. The [Fe(3+)-Gd(3+)] interaction is weakly antiferromagnetic. The isotropic nature of Gd(3+) allowed us to evaluate the exchange interaction (J = 0.77 cm(-)(1)).     

Dinuclear cyano complexes of cobalt(III) and Iron(III) containing noninnocent 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene bridging ligands

Two new dinucleating ligands 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene, H(4)(tpb), and 1,2,4,5-tetrakis(4-tert-butyl-2-pyridinecarboxamido)benzene, H(4)(tbpb), have been synthesized, and the following dinuclear cyano complexes of cobalt(III) and iron(III) have been isolated: Na(2)[Co(III)(2)(tpb)(CN)(4)] (1); [N(n-Bu)(4)](2)[Co(III)(2)(tbpb)(CN)(4)] (2); [Co(III)(2)(tbpb(ox2))(CN)(4)] (3); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(N(3))(4)] (4); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(CN)(4)] (5); [N(n-Bu)(4)](2)[Fe(III)(2)(tbpb)(CN)(4)] (6). Complexes 2-4 and 6 have been structurally characterized by X-ray crystallography at 100 K. From electrochemical and spectroscopic (UV-vis, IR, EPR, M?ssbauer) and magnetochemical investigations it is established that the coordinated central 1,2,4,5-tetraamidobenzene entity in the cyano complexes can be oxidized in two successive one-electron steps yielding paramagnetic (tbpb(ox1))(3)(-) and diamagnetic (tbpb(ox2))(2)(-) anions. Thus, complex 6 exists in five characterized oxidation levels: [Fe(III)(2)(tbpb(ox2))(CN)(4)](0) (S = 0); [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Fe(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Fe(III)Fe(II)(tbpb)(CN)(4)](3)(-) (S = (1)/(2)); [Fe(II)(2)(tbpb)(CN)(4)](4)(-) (S = 0). The iron(II) and (III) ions are always low-spin configurated. The electronic structure of the paramagnetic iron(III) ions and the exchange interaction of the three-spin system [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) are characterized in detail. Similarly, for 2 three oxidation levels have been identified and fully characterized: [Co(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Co(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Co(III)(2)(tbpb(ox2))(CN)(4)](0). The crystal structures of 2 and 3 clearly show that the two electron oxidation of 2 yielding 3 affects only the central tetraamidobenzene part of the ligand.     

Substituent effect on formation of heterometallic molecular wheels: synthesis, crystal structure, and magnetic properties

The reaction of manganese(III) Schiff bases of the type salen(2-) (N,N'-ethylenebis(salicylideneaminato)) with X-substituted (X = CH(3), Cl) pyridinecarboxamide dicyanoferrite(III) [Fe(X-bpb)(CN)(2)](-) gave rise to a series of cyanide-bridged Mn(6)Fe(6) molecular wheels, [Mn(III)(salen)](6)[Fe(III)(bpmb)(CN)(2)](6) x 7H(2)O (1), [Mn(salen)](6)[Fe(bpClb)(CN)(2)](6) x 4H(2)O x 2CH(3)OH (2), [Mn(salen)](6)[Fe(bpdmb)(CN)(2)](6) x 10H(2)O x 5CH(3)OH (3), [Mn(5-Br(salpn))](6)[Fe(bpmb)(CN)(2)](6) x 24H(2)O x 8CH(3)CN (4), and [Mn(5-Cl(salpn))](6)[Fe(bpmb)(CN)(2)](6) x 25H(2)O x 5CH(3)CN (5). Compared with [Fe(bpb)(CN)(2)](-), which always gives rise to 1D or polynuclear species when reacting with Mn(III) Schiff bases, the introduction of substituents (X) to the bpb(2-) ligand has a driving force in formation of the novel wheel structure. Magnetic studies reveal that high-spin ground state S = 15 is present in the wheel compounds originated from the ferromagnetic Mn(III)-Fe(III) coupling. For the first time, the quantum Monte Carlo study has been used to modulate the magnetic susceptibility of the huge Mn(6)Fe(6) metallomacrocycles, showing that the magnetic coupling constants J range from 3.0 to 8.0 K on the basis of the spin Hamiltonian [Formula: see text]. Hysteresis loops for 1 have been observed below 0.8 K, indicative of a single-molecule magnet with a blocking temperature (TB) of 0.8 K. Molecular wheels 2-5 exhibit frequency dependence of alternating-current magnetic susceptibility under zero direct-current magnetic field, signifying the slow magnetization relaxation similar to that of 1. Significantly, an unprecedented archlike Mn(2)Fe(2) cluster, [Mn(5-Cl(salpn))](2)[Fe(bpmb)(CN)(2)](2) x 3H(2)O x CH(3)CN (6), has been isolated as an intermediate of the Mn(6)Fe(6) wheel 5. Ferromagnetic Mn(III)-Fe(III) coupling results in a high-spin S = 5 ground state. Combination of the high-spin state and a negative magnetic anisotropy (D) results in the observation of slow magnetization relaxation in 6.     

Lanthanide-ion-tuned magnetic properties in a series of three-dimensional cyano-bridged Ln(III)W(V) assemblies

The reaction of [W(CN)(8)](3-) with Ln(3+) and pyrazine in acetonitrile yielded a series of isostructural compounds formulated as Ln(H(2)O)(4)(pyrazine)(0.5)W(CN)(8) (Ln = La(1), Ce(2), Pr(3), Nd(4), Sm(5), Eu(6), Gd(7)). The Ln(iii) and W(v) centers in the structure are linked through cyanide groups to form two-dimensional (2D) layers, which are further pillared by pyrazine, generating 3D frameworks. The magnetic behavior for compounds 1-7 were driven by the lanthanide ions involved. The Ln(iii) and W(v) ions in compounds 2 and 5 are ferromagnetically coupled with magnetic ordering occurring at 2.8 K, comparable with magnetic ordering with the critical temperature of 1.9 K for compound 4. In addition, the antiferromagnetic interactions were observed in compounds 3 and 7, while no significant magnetic couplings were found in compounds 1 and 6.     

Synthesis, structures, magnetism and electrochemical properties of triruthenium-acetylide complexes

A series of triruthenium complexes with arylacetylide axial ligands Ru(3)(dpa)(4)(C(2)X)(2)(BF(4))(y)(dpa = dipyridylamido; X = Fc, y= 0 (1); X = Ph, y= 0 (2); X = PhOCH(3), y= 1 (3); X = PhC(5)H(11), y= 1 (4); X = PhCN, y= 0 (5); X = PhNO(2), y= 0 (6)) have been synthesized. The crystal structures show that the Ru-Ru bond lengths (2.3304(9)-2.3572(5)A) of these compounds are longer than those of Ru(3)(dpa)(4)Cl(2)(Ru-Ru=2.2537(1)A). This is ascribed to the formation of the stronger pi-backbonding from metal to axial ligand which weakens the Ru-Ru interactions and the bond order is reduced in the triruthenium unit. Cyclic voltammetry and differential pulse voltammetry show that compound exhibits electronic coupling between the two ferrocenyl units with DeltaE(1/2) close to 100 mV. Compounds 2-6 display three triruthenium-based reversible one-electron redox couples, two oxidations and one reduction, and the electrode potentials shift upon varying the substituents. A linear relationship is observed when the Hammett constants are plotted against the redox potentials.     

Single-molecule magnets constructed from cyanometalates: {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Co, Ni)

Treatment of several divalent transition-metal trifluoromethanesulfonates [M(II)(OTf)2; M(II) = Mn, Co, Ni] with [NEt4][Tp*Fe(III)(CN)3] [Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate] in DMF affords three isostructural rectangular clusters of {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Mn, 3; Co, 4; Ni, 5) stoichiometry. Magnetic studies of 3-5 indicate that the Tp*Fe(CN)3(-) centers are highly anisotropic and exhibit antiferromagnetic (3 and 4) and ferromagnetic (5) exchange to afford S = 4, 2, and 3 spin ground states, respectively. ac susceptibility measurements suggest that 4 and 5 exhibit incipient single-molecule magnetic behavior below 2 K.     

Additional steps toward molecular scale wires: Further study of Ni(5)(10/11+) chains embraced by polypyridylamide ligands

This paper presents two advances in the development of the chemistry of extended metal atom chains (EMACs) that employ di(2-pyridyl)amide (dpa) and its higher homologues (loosely called polypyridylamides). As EMACs employing these ligands are extended to greater lengths, low solubility becomes an increasingly difficult problem. Also, increased stability would be desirable. We have employed a method, which is designed to be applicable to chains of any length, to introduce stabilizing substituents (ethyl groups) on some of the pyridyl rings. We illustrate this here by the synthesis and characterization of the pentanickel complexes Ni(5)(etpda)(4)Cl(2).6CHCl(3) and [Ni(5)(etpda)(4)](PF(6))(3).4Me(2)CO, etpda = the anion of N,N'-bis(4-ethylpyridyl)-2,6-diaminopyridine. As we had previously predicted, on the basis of the behavior of Ni(3)(dpa)(4)Cl(2) and [Ni(3)(dpa)(4)](PF(6))(3), oxidation causes marked changes in structure and magnetic behavior indicative of a change of electronic structure that would cause an insulator-conductor transformation. We now demonstrate that this is what occurs not only in the previously known Ni(5) compounds but in the new ethyl-substituted ones.     

Synthesis, structure, and magnetic properties of three 1D chain complexes based on high-spin metal-cyanide clusters: [Mn(III)6M(III)] (M = Cr, Fe, Co)

On the basis of high-spin metal-cyanide clusters of Mn(III)(6)M(III) (M = Cr, Fe, Co), three one-dimensional (1D) chain complexes, [Mn(salen)](6)[Cr(CN)(6)](2)·6CH(3)OH·H(2)O (1), [Mn(5-CH(3))salen)](6)[Fe(CN)(6)](2)·2CH(3)CN·10H(2)O (2), and [Mn(5-CH(3))salen)](6)[Co(CN)(6)](2)·2CH(3)CN·10H(2)O (3) [salen = N,N'-ethylenebis(salicylideneiminato) dianion], have been synthesized and characterized structurally as well as magnetically. Complexes 2 and 3 are isomorphic but slightly different from complex 1. All three complexes contain a 1D chain structure which is comprised of alternating high-spin metal-cyanide clusters of [Mn(6)M](3+) and a bridging group [M(CN)(6)](3-) in the trans mode. Furthermore, the three complexes all exhibit extended 3D supramolecular networks originating from short intermolecular contacts. Magnetic investigation indicates that the coupling mechanisms are intrachain antiferromagnetic interactions for 1 and ferromagnetic interactions for 2, respectively. Complex 3 is a magnetic dilute system due to the diamagnetic nature of Co(III). Further magnetic investigations show that complexes 1 and 2 are dominated by the 3D antiferromagnetic ordering with T(N) = 7.2 K for 1 and 9.5 K for 2. It is worth noting that the weak frequency-dependent phenomenon of AC susceptibilities was observed in the low-temperature region in both 1 and 2, suggesting the presence of slow magnetic relaxations.     

New linear tricobalt complex of di(2-pyridyl)amide (dpa), [Co3(dpa)4(CH3CN)2][PF6]2

Reaction of the linear tricobalt compound Co3(dpa)4Cl2 (1) (dpa = di(2-pyridyl)amide) with silver hexafluorophosphate in acetonitrile yields [Co3(dpa)4(CH3CN)2][PF6]2 (2). Two crystalline forms are obtained from the same solution, namely, a monoclinic (P2(1)) form 2xCH3CNx2Et2O and a triclinic (P1) form, 2x3CH3CN. The tricobalt units in both crystals are essentially symmetrical, though this is not required by crystal symmetry, with Co-Co distances in the range 2298-2304 A. Each of the two terminal Co atoms is coordinated to an acetonitrile molecule with Co-N distances in the range 2068-2111 A at 213 K. The spiral arrangement of ligands gives an overall idealized D4 point group symmetry for the cation [Co3(dpa)4(CH3CN)2]2+ . Chiral crystals of both delta and lambda configurations in the P2(1) form have been isolated. The absolute configurations were determined by X-ray crystallography and their mirror-image circular dichroism spectra measured. The D4 symmetry of the cation appears to be preserved in solution as judged by the presence of only five proton resonance signals in the 1H NMR spectrum. Magnetic susceptibility measurements in the solid state indicates that 2 has a doublet ground state and exhibits an increase of the effective moment at high temperature (approximately 160 K) due to a spin crossover process.