Magnetic and magnetooptical properties of Fe/Pt and Fe/Pt/Fe thin-film magnetic structures

Results of a study of magnetic and magnetooptical properties of Fe/Pt double-layer and Fe/Pt/Fe three-layer thin-film magnetic structures are presented. A strong effect of the Pt layer on magnetic properties of the studied samples was revealed. It was established that the saturation field of three-layer magnetic structures has an oscillating magnitude with varying Pt layer thickness, and the oscillation period is a function of the Fe layer thickness. The data obtained are explained by the presence of exchange interaction between the Fe layers via the Pt layer. A strong effect of Pt on spectral dependences of the equatorial Kerr effect in the thin-film structures under study is revealed.     

Structure of sputter-deposited Pt/Fe and Cr/Fe multilayers

Conversion electron Mössbauer spectroscopy (CEMS) and X-ray diffraction (XRD) have been used to investigate the structure of Pt/Fe and Cr/Fe multilayers deposited by magnetron sputtering. The Cr/Fe samples consisted of four samples prepared under Ar sputtering pressures of 1.3, 3.0, 5.0, and 10.0 mT, all with the same multilayer structure of 3.5 nm Cr/2.5 nm Fe, repeated 35 times onto c-Si wafer substrates. The quality of the interfaces between Cr and Fe is clearly degraded with increasing sputter pressure, as seen by changes in the relative intensities of four magnetic subspectra in the CEMS and the gradual appearance of a single-line resonance similar to Fe in solution in Cr. The low-angle XRD superlattice peaks also disappear with increasing sputter pressure, while the high-angle XRD shows a tendency for loss of the preferred (110) texture. Two films of Pt/Fe were deposited epitaxially onto MgO single crystals with bilayer periods of 1.3 nm and 2.6 nm and total thickness of 300 nm each. A transition from fcc-PtFe with near-perpendicular magnetic anisotropy to a bcc-Fe/fcc-PtFe mixture with in-plane magnetic texture is observed by CEMS for the factor of two increase in bilayer period.     

Structure and magnetism of Fe/MgO/Fe multilayered nanosystems

The dependences of the structural and magnetic properties of a nanoscale Fe/MgO/Fe planar system on the thickness of the dielectric MgO layer are reported. X-ray crystallographic analysis reveals a high-quality layered structure with abrupt interlayer boundaries and a continuous MgO-insulator layer. Fourth-order magnetocrystalline anisotropy is found in the synthesized structures. A new way to provide antiferromagnetic ordering in the nanostructure is proposed by applying a magnetic field to the investigated structure at an angle of 22° with respect to the easy magnetization axis. In this case, the antiferromagnetic ordering of magnetic moments is established in the field range of 20–50 Oe.     

Perpendicular transport in Fe/InP/Fe heterostructures

Perpendicular electric transport in Fe/InP/Fe heterostructures with different terminations is investigated within the relativistic spin-polarized version of the screened Korringa–Kohn–Rostoker method and the Kubo–Greenwood formula, and compared to a Landauer-like approach. Both methods show that the magnetoresistance becomes constant with increasing spacer thickness.     

Proximity effect in Fe/Pb/Fe trilayers

We have studied superconducting and magnetic properties of sputtered Fe/Pb/Fe-trilayers. For a fixed Pb thickness and with changing Fe thickness, , a monotonic decrease of the superconducting transition temperature was observed. Magnetization measurements clearly showed that Fe remains ferromagnetic down to the monolayer range. A quantitative comparison of with the theory of pair breaking by the exchange field reveals that the observed -suppression by the ferromagnetic Fe-layer is much weaker than expected. Possible reasons for the reduced -suppression in this system are discussed. Received: 30 June 1997 / Revised: 20 August 1997 / Accepted: 16 December 1997     

Magnetic properties of Fe/ZnSe/Fe trilayers

The magnetic properties of Fe/Zn/Fe trilayers have been studied by ferromagnetic resonance and magnetization measurements. These measurements have been used to investigate the magnetic anisotropy of the iron layers and the magnetic coupling across the semiconductor spacer. The angular dependence of the resonance spectra has been measured in-plane and out-of-plane in order to deduce magnetic anisotropy constants of the samples. Experimental data were fitted by using an energy-density expression that includes bulk cubic anisotropy, growth-induced uniaxial in-plane anisotropy and perpendicular-surface anisotropy terms. A small ferromagnetic coupling is observed in the trilayers with spacer thickness up to .     

Swift ion irradiations of Fe/Fe/Si trilayers

We report here on changes in magnetism and microstructure when implanting, at 92 or 300 K, up to 5 × 10¹⁵ Au²⁶⁺-ions cm⁻² of 350 MeV into ^natFe(45 nm)/⁵⁷Fe(20 nm)/Si trilayers. This choice of ions and energy allowed to test the irradiation effects in the regime of pure electronic stopping. The samples were analysed before and after irradiation by Rutherford back-scattering spectroscopy, X-ray diffraction, conversion electron Mössbauer spectroscopy, and magneto-optical Kerr effect. Up to 1 × 10¹⁵ ions cm⁻², there was interface broadening at a mixing rate of Δσ²/Φ = 55(5) nm⁴, followed by full Fe-Si inter-diffusion. The Mössbauer spectra revealed fractions of α-Fe and amorphous ferromagnetic and paramagnetic iron silicides, but no crystalline Fe-Si phase. The magnetic remanence in the as-deposited Fe-layer showed small components of uniaxial and four-fold magnetization. For increasing ion fluence, the component with four-fold symmetry grew at the expense of the uniaxial component. For the highest fluences, an isotropic magnetization was found.     

Magnetic Properties of Fe/Ni and Fe/Co Multilayer Thin Films

In this work, the magnetic and transport properties of Fe/SiO₂/Ni and Fe/SiO₂/Co multilayers grown on Si/SiO₂ substrates have been studied. The samples have been prepared by two-stage deposition process. In the first stage, Fe layer and SiO₂ interlayer of both samples are grown by ion beam deposition technique at room temperature. Then the samples are taken out to ambient atmosphere and loaded into a pulse laser deposition (PLD) chamber. Prior to the deposition of top layer, the samples are cleaned by annealing at 150 °C. In the second stage, Ni (or Co) layer is prepared by PLD technique at room temperature. The thickness of deposited layers has been measured by Rutherford back scattering (RBS). Magnetic properties of ferromagnetic bilayers have been investigated by room-temperature ferromagnetic resonance (FMR) and vibrating sample magnetometer (VSM) techniques. Standard four-point magneto-transport measurements at various temperatures have been performed. Two-step switching in the in-plane hysteresis loops of Fe/SiO₂/Ni and Fe/SiO₂/Co samples is observed. A crossing in the middle of hysteresis loops of both samples points to a weak antiferromagnetic interaction between the magnetic layers of the stacks. Saturation magnetization values have been obtained from the VSM measurements of samples with DC magnetic field perpendicular to the films surface. Magneto-transport measurements have shown the predominant contribution of anisotropic magnetic resistance both at room and low temperatures. FMR studies of Fe/SiO₂/Ni and Fe/SiO₂/Co samples have revealed additional non-uniform (surface and bulk SWR) modes, which behavior has been explained in the framework of the surface inhomogeneity model. An origin of the antiferromagnetic interaction has been discussed.     

Magnetic properties of Fe/Si/Fe trilayer films

The magnetization of Fe/Si/Fe trilayer films is experimentally investigated at low temperatures. It is found that the shape of the magnetization curves measured at T<30 K depends on the thermomagnetic state of the system. The possible mechanisms of the interaction between iron layers are discussed.     

Coupled perpendicular magnetization in Fe/Cu/Fe trilayers

Ultrathin epitaxial Fe films on Cu(1 0 0) with perpendicular magnetization have been used as templates for the preparation of FCC Fe/Cu/Fe trilayers. The magnetic anisotropy and the coupling of these films have been studied by in-situ magneto optical Kerr effect measurements and Kerr microscopy. The magnetic coupling of both Fe layers is found to be dominated by magnetostatic interaction. Adsorbate-induced spin reorientation in the top layer also causes spin reorientation in the bottom layer. The governing role of the Fe-vacuum interface for the magnetism of the whole trilayer is demonstrated.     

Origin of biquadratic exchange in Fe/Si/Fe

The thickness and temperature dependences of the interlayer exchange coupling in well-defined molecular beam epitaxy-grown Fe/Si/Fe sandwich structures have been studied. The biquadratic coupling shows a strong temperature dependence in contrast to the bilinear coupling. Both depend exponentially on thickness. These observations can be well understood in the framework of Slonczewski's loose spins model [J. Appl. Phys. 73, 5957 (1993)]. No bilinear contribution of the loose spins to the coupling was observed.     

合成反铁磁Ni81Fe19/Co90Fe10/Ru/Co90Fe10/Ni81Fe19的研究

采用直流磁控溅射方法制备了一系列的合成反铁磁及以其为自由层的自旋阀.研究发现,在Ni81,Fe19与Ru层之间插入适当厚度的Co90Fe10层后,可有效地提高合成反铁磁两磁性层间的反铁磁耦合强度,得到具有饱和场日.更高、饱和磁化强度M.更低、热稳定性更好的合成反铁磁.另外,以这种合成反铁磁作自旋阀的自由层时,可有效提高自旋阀的稳定性.     

Structure and magnetic properties of Fe/Fe oxide clusters

Fe clusters have been synthesised in ultra-high-vacuum chamber using a gas-stabilized cluster aggregation method that ensures good control of the cluster size and naturally oxidized in order to obtain Fe/Fe oxide core-shell nanoparticles. The morphology of an individual nanoparticle, as revealed by transmission electron microscopy, consists of a Fe core of an average diameter of 4.4 nm surrounded by an oxide shell of uniform thickness of about 1.2 nm in average. The nanoparticles may be assimilated with a ferro-/antiferromagnetic (FM/AF) system. The morpho-structural features have been correlated with magnetic measurements on the core-shell nanoparticles. A significant exchange bias effect has been measured, when the sample was field-cooled under an applied field of 3 T. As the morphology of core-shell nanoclusters is much more complicated than in FM/AF bilayers of regular thickness due to the particular geometry of the coronal AF layer, the shape and surface anisotropy have to be taken into account for a correct interpretation of the magnetic data.     

Oscillations of the Critical Temperature in a (Fe/Cr/Fe)/V/Fe Heterostructure

The superconducting and magnetic properties of the (Fe/Cr/Fe)/V/Fe layered system with variable thickness of the chromium layer have been experimentally and theoretically studied. The magnetic properties of the system have been studied by the ferromagnetic resonance method, and the superconducting transition temperature has been measured from the jump in the magnetic susceptibility. A wide variety of magnetic states are observed in the system; in particular, the structure of small domains can arise in the iron layer placed between vanadium and chromium. It has been shown experimentally that the critical temperature T_c of the superconducting transition undergoes nonmonotonic oscillations with a noticeable amplitude in the given system with the change in the thickness of the Cr layer. The proposed model based on the proximity effect theory makes it possible to relate these T_c oscillations to the features of the magnetic structure of the samples.     

Large magnetothermoelectric power in Co/Cu, Fe/Cu and Fe/Cr multilayers

We report and discuss experimental data on the thermoelectric power of magnetic multilayers. Measurements of the thermoelectric power of Fe/Cr, Co/Cu and Fe/Cu multilayers have been carried out in the temperature range 4K < T < 150 K magnetic fields perpendicular to the layers. All specimens were found to exhibit pronounced magnetothermoelectric power (MTEP) effects correlating with their giant negative magnetoresistance. The main difference between the MTEP and the magnetoresistance is in their temperature dependence. Whereas the magnetoresistance is a decreasing function of temperature, the MTEP, at least in Co/Cu and Fe/Cu multilayers, is very small at low temperature and increases rapidly above 30–40 K. We ascribe this high temperature part of the MTEP to spin-dependent electron-magnon scattering and we propose a theoretical model.     

The structures and magnetic properties of Cr/Fe and Mn/Fe thin films

Cr_1-x Fe _x and Mn_1-x Fe _x films were prepared at room temperature by thermal coevaporation at a deposition rate of about 25 Å/min. It was found that an amorphous phase can be obtained for Cr_1-x Fe _x (0.25<x<0.60) films, while a metastable-Mn-type phase was observed for Mn_1-x Fe _x (x<0.70) films. The influence of the structure on the magnetic properties has been studied. The amorphization ability of the two systems was discussed in terms of thermodynamic considerations.     

Microwave switching behaviors of Fe/Ag/Fe/Ag epitaxial films

In this study, Fe/Ag/Fe/Ag ferromagnetic structures were epitaxially grown on a GaAs(1 0 0) substrate. Using the Network Analyzer (Agilent 8510C), FMR (ferromagnetic resonant) signals were observed in samples as the in-plane magnetic field was applied to either hard- or easy-axes. Of interest was that our sample demonstrated a FMR-switching behavior in hard-axis but not in easy-axis. The detecting data showed that the switch magnetic field was much smaller than what has been stated previously in Fe/Cu/Fe systems by other laboratories. In addition to the frequency switch in FMR, we also observed a magnetic reversal behavior in its M–H curve. Data presented that both of the FMR and magnetic reverse took place in the same direction (hard-axis).     

Electric and thermo spin transfer torques in Fe/Vacuum/Fe tunnel junction

We present first-principle calculations of electric and thermo spin transfer torques (STT) in Fe/Vacuum(Vac)/Fe magnetic tunnel junctions (MTJs). Our quantitative studies demonstrate rich bias dependence of STT and tunnel magneto resistance (TMR) behaviors with respect to the interface roughness. Thermoelectric effects in Fe/Vac/Fe MTJs is remarkable. We observe larger ZT of 6.2 in 8 ML clean Vacuum barrier, where the heavily restrained thermal conductance should be responsible for. Thermo-STT in Fe/Vac/Fe MTJs show same order as that in Fe/MgO/Fe MTJs with similar barrier thickness.     

Scanning tunneling microscopy investigation of CoO/Fe(001) and Fe/CoO/Fe(001) layered structures

We report on the nanometer scale morphology of CoO thin films grown on top of Fe(001) substrates from the early stages of interface formation (few atomic layers), and on the surface topography of Fe/CoO/Fe(001) layered structures. The growth of the CoO films is dominated by formation of islands up to about 5 nominal atomic layers, then it proceeds in the layer-plus-island regime. The surface topography of thin Fe films grown on top of the CoO/Fe systems is strongly influenced by the morphology of the latter. Moreover, we observe a strong relationship between the growth mode and the chemical interactions at the CoO/Fe interface, since thick layers of iron oxides develop only below the CoO islands, as an effect of the proximity between Fe and Co atoms. We finally discuss possible implications of our observations on the magnetic properties of these layered magnetic structures.