Efficient synthesis of alkynylsilyl ethers and silaketals via base-induced alkynylsilane alcoholysis

The efficient silylation of alcohols with di- and trialkynylsilanes was achieved under base-catalyzed conditions to afford alkynyl silyl ethers and symmetrical alkynyl silaketals in good yield. A selective alcoholysis of dialkynyl silyl ethers to mixed silaketals was also demonstrated. These products served as substrates for enyne ring-closing metathesis and, consequently, as precursors to stereochemically defined 1,3-dienes.     

Rhodium(II)‐Catalyzed Dehydrogenative Silylation of Biaryl‐Type Monophosphines with Hydrosilanes

A rhodium‐catalyzed system is introduced for in situ modification of biaryl‐type monophosphines with hydrosilanes through a P^III‐chelation‐assisted dehydrogenative silylation reaction. A series of ligands containing silyl groups with different steric and electronic properties were obtained with excellent regioselectivities. This method offers many advantages, including the use of commercially available phosphines, no requirement for an external ligand or oxidant, a broader substrate scope, high efficiency, and access to a single regioisomer. Based on the outstanding properties of the parent scaffolds, the silyl‐substituted phosphines serve as excellent ligands in Pd‐catalyzed asymmetric Suzuki coupling reactions.     

An Alternative Mechanistic Paradigm for the β‐Z Hydrosilylation of Terminal Alkynes: The Role of Acetone as a Silane Shuttle

The β‐Z selectivity in the hydrosilylation of terminal alkynes has been hitherto explained by introduction of isomerisation steps in classical mechanisms. DFT calculations and experimental observations on the system [M(I)₂{κ‐C,C,O,O‐(bis‐NHC)}]BF₄ (M=Ir ( 3 a ), Rh ( 3 b ); bis‐NHC=methylenebis(N‐2‐methoxyethyl)imidazole‐2‐ylidene) support a new mechanism, alternative to classical postulations, based on an outer‐sphere model. Heterolytic splitting of the silane molecule by the metal centre and acetone (solvent) affords a metal hydride and the oxocarbenium ion [R₃Si? O(CH₃)₂]⁺, which reacts with the corresponding alkyne in solution to give the silylation product [R₃Si? CH?C? R]⁺. Thus, acetone acts as a silane shuttle by transferring the silyl moiety from the silane to the alkyne. Finally, nucleophilic attack of the hydrido ligand over [R₃Si? CH?C? R]⁺ affords selectively the β‐(Z)‐vinylsilane. The β‐Z selectivity is explained on the grounds of the steric interaction between the silyl moiety and the ligand system resulting from the geometry of the approach that leads to β‐(E)‐vinylsilanes.     

Rhodium-Catalyzed Enantioselective Formal [4+1] Cyclization of Benzyl Alcohols and Benzaldimines: Facile Access to Silicon-Stereogenic Heterocycles

The carbon-to-silicon switch in formation of bioactive sila-heterocycles with a silicon-stereogenic center has garnered significant interest in drug discovery. However, metal-catalyzed synthesis of such scaffolds is still in its infancy. Herein, a rhodium-catalyzed enantioselective formal [4+1] cyclization of benzyl alcohols and benzaldimines has been realized by enantioselective difunctionalization of a secondary silane reagent, affording chiral-at-silicon cyclic silyl ethers and sila-isoindolines, respectively. Mechanistic studies reveal a dual role of the rhodium-hydride catalyst. The coupling system proceeds via rhodium-catalyzed enantio-determining dehydrogenative OH silylation of the benzyl alcohol or hydrosilylation of the imine to give an enantioenriched silyl ether or silazane intermediate, respectively. The same rhodium catalyst also enables subsequent intramolecular cyclative C−H silylation directed by the pendent Si-H group. Experimental and DFT studies have been conducted to explore the mechanism of the OH bond silylation of benzyl alcohol, where the Si-O reductive elimination from a Rh(III) hydride intermediate has been established as the enantiodetermining step.     

Total synthesis of dolabelide D

The first total synthesis of dolabelide D (or of any of the closely related dolabelides) has been achieved with a longest linear sequence of 17 steps. Key features of the synthesis include an application of the catalytic asymmetric silane alcoholysis, the tandem silylformylation-crotylsilylation, and a Brook-like 1,4-carbon to oxygen silyl migration.     

Atroposelective Silylation of 1,1′-Biaryl-2,6-diols by a Chiral Counteranion Directed Desymmetrization Enhanced by a Subsequent Kinetic Resolution

A desymmetrizing silylation of aromatic diols is reported. The previously unknown asymmetric silyl ether formation of phenol derivatives is achieved by applying List's counteranion directed silylation technique. A silylium-ion-like silicon electrophile generated from an allylic silane paired with an imidodiphosphorimidate (IDPi) enables enantioselective discrimination of achiral 1,1′-biaryl-2,6-diols. The enantioselectivity of that desymmetrization is further improved by a downstream kinetic resolution, converting the monosilylated minor enantiomer into the corresponding, again achiral bissilylated diol.     

Chiral PSiSi-Ligand Enabled Iridium-Catalyzed Atroposelective Intermolecular C−H Silylation

Catalytic enantioselective intermolecular C−H silylation offers an efficient approach for the rapid construction of chiral organosilicon compounds, but remains a significant challenge. Herein, a new type of chiral silyl ligand is developed, which enables the first iridium-catalyzed atroposelective intermolecular C−H silylation reaction of 2-arylisoquinolines. This protocol features mild reaction conditions, high atom economy, and remarkable yield with excellent stereoselectivity (up to 99 % yield, 99 % ee), delivering enantioenriched axially chiral silane platform molecules with facile convertibility. Key to the success of this unprecedented transformation relies on a novel chiral PSiSi-ligand, which facilitates the intermolecular C−H silylation process with perfect chem-, regio- and stereo-control via a multi-coordinated silyl iridium complex.     

Nonclassical titanocene silyl hydrides

The titanocene silyl hydride complexes [Ti(Cp)2(PMe3)(H)(SiR3)] [SiR3=SiMePhCl (6), SiPh2Cl (7), SiMeCl2 (8), SiCl3 (9)] were prepared by HSiR3 addition to [Ti(Cp)2(PMe3)2] and were studied by NMR and IR spectroscopy, X-ray diffraction (for 6, 8, and 9), and DFT calculations. Spectroscopic and structural data established that these complexes exhibit nonclassical Ti-H-Si-Cl interligand hypervalent interactions. In particular, the observation of silicon-hydride coupling constants J(Si,H) in 6-9 in the range 22-40 Hz, the signs of which we found to be negative for 8 and 9, is conclusive evidence of the presence of a direct Si-H bond. The analogous reaction of [Ti(Cp)2(PMe3)2] with HSi(OEt)3 does not afford the expected classical silyl hydride complex [Ti(Cp)2(PMe3)(H)[Si(OEt)3]], and instead NMR-silent titanium (apparently TiIII) complex(es) and the silane redistribution product Si(OEt)4 are formed. The structural data and DFT calculations for the compounds [Ti(Cp)2(PMe3)(H)(SiR3)] show that the strength of interligand hypervalent interactions in the chlorosilyl complexes decreases as the number of chloro groups on silicon increases. However, in the absence of an Si-bound electron-withdrawing group trans to the Si-H moiety, a silane sigma complex is formed, characterized by a long Ti-Si bond of 2.658 A and short Si-H contact of 1.840 A in the model complex [Ti(Cp)2(PMe3)(H)(SiMe3)]. Both the silane sigma complexes and silyl hydride complexes with interligand hypervalent interactions exhibit bond paths between the silicon and hydride atoms in Atoms in Molecules (AIM) studies. To date a classical titanocene phosphane silyl hydride complex without any Si-H interaction has not been observed, and therefore titanocene silyl hydrides are, depending on the nature of the R groups on Si, either silane sigma complexes or compounds with an interligand hypervalent interaction.     

Rhodium‐Catalyzed Dehydrogenative Silylation of Acetophenone Derivatives: Formation of Silyl Enol Ethers versus Silyl Ethers

A series of rhodium–NSiN complexes (NSiN=bis (pyridine‐2‐yloxy)methylsilyl fac‐coordinated) is reported, including the solid‐state structures of [Rh(H)(Cl)(NSiN)(PCy₃)] (Cy=cyclohexane) and [Rh(H)(CF₃SO₃)(NSiN)(coe)] (coe=cis‐cyclooctene). The [Rh(H)(CF₃SO₃)(NSiN)(coe)]‐catalyzed reaction of acetophenone with silanes performed in an open system was studied. Interestingly, in most of the cases the formation of the corresponding silyl enol ether as major reaction product was observed. However, when the catalytic reactions were performed in closed systems, formation of the corresponding silyl ether was favored. Moreover, theoretical calculations on the reaction of [Rh(H)(CF₃SO₃)(NSiN)(coe)] with HSiMe₃ and acetophenone showed that formation of the silyl enol ether is kinetically favored, while the silyl ether is the thermodynamic product. The dehydrogenative silylation entails heterolytic cleavage of the Si?H bond by a metal–ligand cooperative mechanism as the rate‐determining step. Silyl transfer from a coordinated trimethylsilyltriflate molecule to the acetophenone followed by proton transfer from the activated acetophenone to the hydride ligand results in the formation of H₂ and the corresponding silyl enol ether.     

Cross‐Metathesis of Terminal Alkynes

Terminal acetylenes are amongst the most problematic substrates for alkyne metathesis because they tend to undergo rapid polymerization on contact with a metal alkylidyne. The molybdenum complex 3 endowed with triphenylsilanolate ligands, however, is capable of inducing surprisingly effective cross‐metathesis reactions of terminal alkyl acetylenes with propynyl(trimethyl)silane to give products of type R¹?C?CSiMe . This unconventional way of introducing a silyl substituent onto an alkyne terminus complements the conventional tactics of deprotonation/silylation and excels as an orthogonal way of alkyne protecting group chemistry for substrates bearing base‐sensitive functionalities. Moreover, it is shown that even terminal aryl acetylenes can be cross‐metathesized with internal alkyne partners. These unprecedented transformations are compatible with various functional groups. The need to suppress acetylene formation, which seems to be a particularly effective catalyst poison, is also discussed.     

Mechanism of Alkyne Alkoxycarbonylation at a Pd Catalyst with P,N Hemilabile Ligands: A Density Functional Study

A detailed mechanism for alkyne alkoxycarbonylation mediated by a palladium catalyst has been characterised at the B3PW91‐D3/PCM level of density functional theory (including bulk solvation and dispersion corrections). This transformation, investigated via the methoxycarbonylation of propyne, involves a uniquely dual role for the P,N hemilabile ligand acting co‐catalytically as both an in situ base and proton relay coupled with a Pd⁰ centre, allowing for surmountable barriers (highest ΔG^≠ of 22.9 kcal mol^?1 for alcoholysis). This proton‐shuffle between methanol and coordinated propyne accounts for experimental requirements (high acid concentration) and reproduces observed regioselectivities as a function of ligand structure. A simple ligand modification is proposed, which is predicted to improve catalytic turnover by three orders of magnitude.     

Studies on the mechanism of B(C(6)F(5))(3)-catalyzed hydrosilation of carbonyl functions

The strong organoborane Lewis acid B(C(6)F(5))(3) catalyzes the hydrosilation (using R(3)SiH) of aromatic and aliphatic carbonyl functions at convenient rates with loadings of 1-4%. For aldehydes and ketones, the product silyl ethers are isolated in 75-96% yield; for esters, the aldehydes produced upon workup of the silyl acetal products can be obtained in 45-70% yield. Extensive mechanistic studies point to an unusual silane activation mechanism rather than one involving borane activation of the carbonyl function. Quantitative kinetic studies show that the least basic substrates are hydrosilated at the fastest rates; furthermore, increased concentrations of substrate have an inhibitory effect on the observed reaction rate. Paradoxically, the most basic substrates are reduced selectively, albeit at a slower rate, in competition experiments. The borane thus must dissociate from the carbonyl to activate the silane via hydride abstraction; the incipient silylium species then coordinates the most basic function, which is selectively reduced by [HB(C(6)F(5))(3)](-). In addition to the kinetic data, this mechanistic proposal is supported by a kinetic isotope effect of 1.4(5) for the hydrosilation of acetophenone, the observation that B(C(6)F(5))(3) catalyzes H/D and H/H scrambling in silanes in the absence of substrate, computational investigations, the synthesis of models for proposed intermediates, and other isotope labeling and crossover experiments.     

Highly beta-(E)-selective hydrosilylation of terminal and internal alkynes catalyzed by a (IPr)Pt(diene) complex

The regioselective hydrosilylation of terminal and internal alkynes catalyzed by the novel (IPr)Pt(AE) ( 7) (IPr = bis(2,6-diisopropylphenyl)imidazo-2-ylidene, AE = allyl ether) complex is presented. The (IPr)Pt(AE) catalyst displays enhanced activity and regioselectivity for the hydrosilylation of terminal and internal alkynes with low catalyst loading (0.1 to 0.05 mol %) when compared to the parent (IPr)Pt(DVDS) complex ( 6) (DVDS = divinyltetramethyldisiloxane). The reaction leads to exquisite regioselectivity in favor of the cis-addition product on the less hindered terminus of terminal and internal alkynes. The solvent effects were examined for the difficult hydrosilylation of benzylpropargyl ether. In light of the observed product distribution and kinetic data, a mechanistic scheme is proposed involving two competing catalytic cycles. One cycle leads to high regioselectivities while the other, having lost the stereodirecting IPr carbene ligand, displays low regiocontrol and activities. The importance of this secondary catalytic cycle is either caused by the strong coordinating ability of the alkyne or by the low reactivity of the silane or both.     

Selective dehydrogenative silylation-hydrogenation reaction of divinyldisiloxane with hydrosilane catalyzed by an iron complex

A hydride and a silyl group of hydrosilane is introduced into 1,3-divinyldisiloxane in the presence of a catalytic amount of (η(5)-C(5)H(5))Fe(CO)(2)Me. Instead of the product expected from the well-known hydrosilylation reaction, the product obtained is that characteristic of dehydrogenative silylation at one vinyl group and hydrogenation at the other vinyl group of 1,3-divinyldisiloxane. Based on deuterium labeling experiments, a catalytic cycle for this new reaction has been proposed.     

One-pot enol silane formation-Mukaiyama aldol reactions: Crossed aldehyde-aldehyde coupling,thioester substrates,and reactions in ester solvents

Trimethylsilyl trifluoromethanesulfonate (TMSOTf) and a trialkylamine base promote both in situ enol silane/silyl ketene acetal formation and Mukaiyama aldol addition reactions between a variety of reaction partners in a single reaction flask. Isolation of the required enol silane or silyl ketene acetal is not necessary. For example, crossed aldol reactions between α-disubstituted aldehydes and non-enolizable aldehydes yield β-hydroxy aldehydes in good yield. In a related reaction, the common laboratory solvent ethyl acetate functions as both an enolate precursor and a green reaction solvent. When thioesters are employed as enolate precursors, high yields for additions to non-enolizable aldehydes are routinely observed.     

Stationary and non-stationary etching of Si(100) surfaces with gas phase and adsorbed hydrogen

Stationary and non-stationary etching of Si(100) surfaces by hydrogen were studied between 200 K and 800 K using direct product detection and thermal desorption spectroscopy. Silane was the only etch product observed. The rates of silane SiD_nH_4−n isotopes measured during etching D-saturated Si(100) surfaces with gaseous H illustrate that the etch reaction proceeds between surface silyl and incoming H in a direct (Eley–Rideal or hot-atom) reaction step: H(g)+SiD₃(ad)→SiD₃H(g). Non-stationary etching via silane desorption occurs through disproportionation between surface dihydride and silyl groups, SiH₂(ad)+SiH₃(ad)→SiH₄(g).     

An efficient iridium catalyst for reduction of carbon dioxide to methane with trialkylsilanes

Cationic silane complexes of general structure (POCOP)Ir(H)(HSiR(3)) {POCOP = 2,6-[OP(tBu)(2)](2)C(6)H(3)} catalyze hydrosilylations of CO(2). Using bulky silanes results in formation of bis(silyl)acetals and methyl silyl ethers as well as siloxanes and CH(4). Using less bulky silanes such as Me(2)EtSiH or Me(2)PhSiH results in rapid formation of CH(4) and siloxane with no detection of bis(silyl)acetal and methyl silyl ether intermediates. The catalyst system is long-lived, and 8300 turnovers can be achieved using Me(2)PhSiH with a 0.0077 mol % loading of iridium. The proposed mechanism for the conversion of CO(2) to CH(4) involves initial formation of the unobserved HCOOSiR(3). This formate ester is then reduced sequentially to R(3)SiOCH(2)OSiR(3), then R(3)SiOCH(3), and finally to R(3)SiOSiR(3) and CH(4).     

Preparation, thermal properties and flame retardancy of phosphorus- and silicon-containing epoxy resins

Phosphorus- and silicon-containing epoxy resins were prepared from (2,5-dihydroxyphenyl)diphenyl phosphine oxide (Gly-HPO), diglycidyloxy methylphenyl silane (DGMPS) and 1,4-bis(glycidyloxydimethyl silyl)-benzene (BGDMSB) as epoxy monomers and diaminodiphenylmethane (DDM), bis(3-aminophenyl)methyl phosphine oxide (BAMPO) and bis(4-aminophenoxy)dimethyl silane (APDS) as curing agents. Epoxy resins with different phosphorus and silicon content were obtained. Their thermal, dynamic mechanical and flame retardant properties were evaluated. The high LOI values confirmed that epoxy resins containing hetero-atoms are effective flame retardants, but a synergistic efficiency of phosphorus and silicon on flame retardation was not observed.     

Unusual Structure,Fluxionality, and Reaction Mechanism of Carbonyl Hydrosilylation by Silyl Hydride Complex [(ArN)Mo(H)(SiH2Ph)(PMe3)3]

The reactions of bis(borohydride) complexes [(RN?)Mo(BH₄)₂(PMe₃)₂] ( 4 : R=2,6‐Me₂C₆H₃; 5 : R=2,6‐iPr₂C₆H₃) with hydrosilanes afford new silyl hydride derivatives [(RN?)Mo(H)(SiR′₃)(PMe₃)₃] ( 3 : R=Ar, R′₃=H₂Ph; 8 : R=Ar′, R′₃=H₂Ph; 9 : R=Ar, R′₃=(OEt)₃; 10 : R=Ar, R′₃=HMePh). These compounds can also be conveniently prepared by reacting [(RN?)Mo(H)(Cl)(PMe₃)₃] with one equivalent of LiBH₄ in the presence of a silane. Complex 3 undergoes intramolecular and intermolecular phosphine exchange, as well as exchange between the silyl ligand and the free silane. Kinetic and DFT studies show that the intermolecular phosphine exchange occurs through the predissociation of a PMe₃ group, which, surprisingly, is facilitated by the silane. The intramolecular exchange proceeds through a new non‐Bailar‐twist pathway. The silyl/silane exchange proceeds through an unusual Mo^VI intermediate, [(ArN?)Mo(H)₂(SiH₂Ph)₂(PMe₃)₂] ( 19 ). Complex 3 was found to be the catalyst of a variety of hydrosilylation reactions of carbonyl compounds (aldehydes and ketones) and nitriles, as well as of silane alcoholysis. Stoichiometric mechanistic studies of the hydrosilylation of acetone, supported by DFT calculations, suggest the operation of an unexpected mechanism, in that the silyl ligand of compound 3 plays an unusual role as a spectator ligand. The addition of acetone to compound 3 leads to the formation of [trans‐(ArN)Mo(OiPr)(SiH₂Ph)(PMe₃)₂] ( 18 ). This latter species does not undergo the elimination of a Si? O group (which corresponds to the conventional Ojima′s mechanism of hydrosilylation). Rather, complex 18 undergoes unusual reversible β‐CH activation of the isopropoxy ligand. In the hydrosilylation of benzaldehyde, the reaction proceeds through the formation of a new intermediate bis(benzaldehyde) adduct, [(ArN?)Mo(η²‐PhC(O)H)₂(PMe₃)], which reacts further with hydrosilane through a η¹‐silane complex, as studied by DFT calculations.     

1,2 → 1,1-Migration of Silyl Group. Formation of 1,1-Bis(dichloromethylsilyl)-2-chloroethane in Catalytic Hydrochlorination of 1,2-Bis(dichloromethylsilyl)ethylene

Hydrochlorination of 1,2-bis(silyl)ethylenes of the general formula Me_nCl_3-n SiCH = CHSiMe_n· Cl_3-n , where n = 0-3, in the presence of FeCl₃ was carried out. By NMR spectroscopy it was shown that in the case of the MeCl₂Si derivative the major product is 1,1-bis(silyl)chloroethane and the minor product is its isomeric 1,2-bis(silyl)chloroethane (4:1). A reaction scheme is proposed, that includes isomerization of the intermediate bis(silyl)ethyl cation.