Improved kinetics of LiNi(1/3)Mn(1/3)Co(1/3)O2 cathode material through reduced graphene oxide networks

An electronically conducting 3D network of reduced graphene oxide (RGO) was introduced into LiNi(1/3)Mn(1/3)Co(1/3)O(2) (LNMC) cathode material in a special nano/micro hierarchical structure. The rate test and cycling measurement showed that the hierarchical networks remarkably improve the high rate performance of LNMC electrode for lithium-ion batteries. The effect of RGO conducting networks on kinetic property was investigated by electrochemical impedance spectroscopy (EIS) and potentiostatic intermittent titration (PITT). The EIS results reveal that the RGO network greatly decreases the resistance of lithium batteries, especially the charge transfer resistance which can be attributed to the significantly improved conducting networks. The enhancement of apparent diffusion coefficient by the RGO conducting networks is shown by PITT. The power performance was found to be limited by the electrical conduction in the two-phase region, which can be greatly facilitated by the hierarchical RGO network together with carbon black. The as-obtained LNMC/RGO cathode exhibits an outstanding electrochemical property supporting the design idea of electronically conducting 3D networks for the high-energy and high-power lithium-ion batteries.     

Hydrolytic degradation behavior of poly(rac-lactide)-block-poly(propylene glycol)-block-poly(rac-lactide) dimethacrylate derived networks designed for biomedical applications

For polymer-based degradable implants, mechanical performance and degradation behavior need to be precisely controlled. Based on a rational design, this work comprehensively describes the properties of photo-crosslinked polymer networks prepared from poly(rac-lactide)-block-poly(propylene glycol)-block-poly(rac-lactide) dimethacrylate precursors during degradation. By varying the length of poly(rac-lactide) blocks connected to a central 4 kDa polyether block, microphase separated networks with adjustable crosslinking density, hydrophilicity/hydrophobicity ratio, thermal, and mechanical properties are obtained. The materials are characterized by a low water uptake, controlled mass loss, and slowly decreasing wet-state E moduli in the kPa range.     

pH敏感性两亲聚合物网络PAA—l—PTHF的研究

以具有良好柔性和生物相容性的聚四氢呋喃（ＰＴＨＦ）为疏水链段,具有ｐＨ敏感性的聚丙烯酸（ＰＡＡ）为亲水链段,通过ＰＴＨＦ双端基大分子单体与丙烯酸自由基共聚,首次合成了聚丙烯酸－ｌ－聚四氢呋喃（ＰＡＡ－ｌ－ＰＴＨＦ）两亲聚合物网络,并对网络的结构、组成以及交联点密度进行了表征。两亲聚合物网络溶胀行为研究表明,ＰＡＡ－ｌ－ＰＴＨＦ既能在水中溶胀又能在有机溶剂中溶胀,在水中的溶胀度随网络亲水链段ＰＡＡ含     

Michael addition for crosslinking of poly(caprolactone)s

Poly(caprolactone) (PCL) networks have received significant attention in the literature because of many emerging potential applications as biodegradable materials. In this study, the Michael addition reaction was used for the first time to synthesize biodegradable networks using crosslinking of acetoacetate‐functionalized PCL (PCL bisAcAc) oligomers with neopentyl glycol diacrylate. Hydroxyl‐terminated PCL telechelic oligomers with number‐average molecular weights ranging from 1000 to 4000 g/mol were quantitatively functionalized with acetoacetate groups using transacetoacetylation. In addition to difunctional PCL oligomers, hydroxyl‐terminated trifunctional star‐shaped PCL oligomers were functionalized with acetoacetate groups. Derivatization of the terminal hydroxyl groups with acetoacetate groups was confirmed using FTIR spectroscopy, ¹H NMR spectroscopy, mass spectrometry, and base titration of hydroxyl end groups. PCL bisAcAc precursors were reacted with neopentyl glycol diacrylate in the presence of an organic base at room temperature. The crosslinking reactions yielded networks with high gel contents (>85%). The thermomechanical properties of the networks were analyzed to investigate the influence of molecular weight between crosslink points. The glass transition and the extent of crystallinity of the PCL networks were dependent on the molecular weight of the PCL segment. Dynamic mechanical analysis indicated that the plateau modulus of the networks was dependent on the molecular weight of PCL, which was related to the crosslink density of the networks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5437–5447, 2009     

Helices versus zigzag chains: one-dimensional coordination polymers of Ag(I) and Bis(4-pyridyl)amine

Five one-dimensional coordination polymers were prepared by the reaction of a bent bridging ligand, bis(4-pyridyl)amine (bpa), with an extensive series of AgX salts (X = CF3SO3, PF6, ClO4, NO3). The 1D polymer networks formed with AgCF3SO3 (1), AgPF6 (2.MeCN), and AgClO4 (3.2MeCN) all incorporated MeCN and were found to adopt a zigzag arrangement. The networks formed with AgClO4 (4) and AgNO3 (5) did not contain any solvent and adopted a single-stranded helical arrangement. Two-dimensional H-bonding networks were formed for 1 and 3.2MeCN, with network topologies 4.8(2) and (4, 4), respectively, whereas three-dimensional H-bonded networks of helices were formed for 4, showing an (8, 3)-a network topology, and 5, showing the topology of the alpha-polonium net. The three-dimensional networks both exhibited 4-fold interpenetration. The NO3- anion in 5 appeared to be acting as a template for the 3D structure.     

Model polyurethane networks prepared from poly(ethylene oxide) and poly(tetramethylene oxide)

Polyurethane elastomers of known degrees of cross-linking were prepared from hydroxylterminated poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) chains having numberaverage molecular weights in the range 880–6820 g mol^?1. The chains were end-linked into “model” trifunctional networks using a specially prepared aromatic triisocyanate. The networks thus obtained were studied with regard to their stress-strain isotherms in both the unswollen and swollen states, in elongation at 25°, and with regard to their equilibrium swelling in benzene at 57.9°. Values of the modulus in the limit at high deformation were in good agreement with corresponding results previously obtained on trifunctional networks of poly(dimethylsiloxane) (PDMS). Since PEO has a much higher value of the plateau modulus in the uncross-linked state, this agreement indicates that inter-chain entanglements do not contribute significantly to the equilibrium modulus of an elastomeric network. These values of the high deformation modulus are also in good agreement with recent molecular theories as applied to the non-affine deformation of a “phantom” network. The swelling equilibrium results were in very good agreement with the new theory of network swelling developed by Flory.     

Three-component interpenetrating polymer networks (IPN's) from polyurethanes,epoxies, and poly(methacrylates)

Three-component IPN systems made from polyurethanes, epoxies, and poly(methacrylates) containing charge groups in the backbones of the constituent networks have been prepared. Specific attractive forces that occurred among the various networks helped to compatibilize them and aided in the formation of true homogeneous topologically interpenetrating polymer networks. These three-component polymer alloys, including full-IPN's, pseudo-IPN's, and graft-IPN's, were characterized by means of mechanical spectroscopy, electron microscopy, and stress–strain properties. In addition, some adhesion studies were carried out (lap shear strength and peel strength). A comparison of the different types of three-component polymer alloys showed that better properties were generally exhibited by the graft-IPN's and full-IPN's containing opposite charge groups.     

Interpenetrating polymer networks based on poly(chloroprene) and poly(carbonate-urethane)

Simultaneous interpenetrating polymer networks (SIN's) of poly(chloroprene) (CR) and poly(carbonate-urethane) (PCU) were prepared and characterized. The effect of composition on the phase morphology of full IPN's of CR/PCU has been studied by DSC and SEM. A single phase morphology of IPN's has achieved when the content of CR component is below 50 wt %. The microphase separation of the component networks in the IPN's occurred in samples whose weight percentage of the CR component was 50% and higher. © 1993 John Wiley & Sons, Inc.     

Transport of hydrogen and carbon monoxide in highly crosslinked poly(propylene glycol) networks

Previous interpretations of gas transport data in crosslinked networks have been hindered by an inability to accurately control and evaluate the network parameters. We have recently prepared a series of model networks by reacting poly(propylene glycol) with a triisocyanate crosslinking agent. The poly(propylene glycol)s had narrow molecular weight distributions and average molecular weights between 425 and 3000, so the resulting networks had uniform average molecular weights between crosslinks. Hydrogen and carbon monoxide permeabilities in membranes formed from these networks increase with decreasing crosslink density. These results indicate increased cooperative molecular motions in the networks with longer average chain lengths between crosslinks. Increasing the average molecular weight between crosslinks also reduces the discrimination between these two gases so that the separation factors decrease. For networks prepared from mixtures of poly(propylene glycol)s with different molecular weights the gas permeabilities (but not the separation factors) depend on the molecular weight distribution.     

Poly(methyl acrylate)/poly(hydroxyethyl acrylate) sequential interpenetrating polymer networks. Miscibility and water sorption behavior

Sequential poly(methyl acrylate)/poly(hydroxyethyl acrylate) interpenetrating polymer networks with different poly(hydroxyethyl acrylate) contents were prepared by free radical polymerization of hydroxyethyl acrylate inside the previously polymerized poly(methyl acrylate) network. Differential scanning calorimetry on dry samples shows that the interpenetrating polymer networks exhibit phase separation, and no differences are found between the glass transition temperatures of the two phases present in the interpenetrating polymer network and those of the pure components. Thermally stimulated depolarization current experiments were used to study the influence of water sorption on the mobility of the different molecular groups in the poly(hydroxyethyl acrylate) phase of the interpenetrating polymer network. Isothermal water sorption of the interpenetrating polymer networks and pure poly(methyl acrylate) and poly(hydroxyethyl acrylate) networks is analyzed with different theories to compare the behavior of the poly(hydroxyethyl acrylate) phase in the interpenetrating polymer networks with that of the pure poly(hydroxyethyl acrylate) network. Diffusion coefficients of water in the interpenetrating polymer networks are obtained by means of dynamic sorption experiments. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1587–1599, 1999     

Anion mediated structural motifs in silver(I) complexes with corannulene

The synthesis of three new silver(I) complexes with corannulene is reported. In the crystal these complexes form extended networks of Ag(+) ions, corannulene nuclei, and counterions, similar to the networks reported for Ag(+) with other polynuclear aromatic hydrocarbons (PAHs). The preferred Ag(+)-arene interaction is compared with the model developed by Kochi. The crystal motifs can be described by a classification scheme analogous to that developed by Etter for hydrogen-bonded networks in solids. The effect of counterion variation (ClO(4)(-), O(3)SCF(3)(-), BF(4)(-)) is noted to be substantial. Thus, although one can categorize the various networks, it is hard to predict an expected packing pattern on the basis of preferred binding in the metal/organic complex alone.     

Isomerization between 2-(2,4-Dihydroxystyryl)-1-benzopyrylium and 7-Hydroxy-2-(4-hydroxystyryl)-1-benzopyrylium

2-Phenyl-1-benzopyrylium (flavylium) and 2-styryl-1-benzopyrylium (styrylflavylium) cations establish in aqueous solution a series of equilibria defining chemical reaction networks responsive to several stimuli (pH, light, redox potential). Control over the mole fraction distribution of species by applying the appropiate stimuli defines a horizontal approach to supramolecular chemistry, in agreement with the customary bottom-up approach toward complex systems. In this work, we designed an asymmetric styrylchalcone able to cyclize in two different ways, producing two isomeric styrylflavylium cations whose chemical reaction networks are thus interconnected. The chemical reaction networks of 2-(2,4-dihydroxystyryl)-1-benzopyrylium (AH(+)) and 7-hydroxy-2-(4-hydroxystyryl)-1-benzopyrylium (AH(+)(iso)) comprise the usual species observed in flavylium-derived networks, in this case, the styryl derivatives of quinoidal bases, hemiketals, and chalcones. The thermodynamics and kinetics of the crossed networks were characterized by the use of UV-vis absorption and NMR spectroscopy as well as time-resolved pH jumps followed by stopped-flow. The two styrylflavylium cations are connected (isomerize) through two alternative intermediates, the asymmetric trans-styrylchalcone (Ct) and a spiropyran-type intermediate (SP). At pH = 1, AH(+) slowly evolves (k(obs) ≈ 10(-5) s(-1)) to a mixture containing 62% AH(+)(iso) through the Ct intermediate, while at pH = 5, the SP intermediate is involved. The observed rate constants for the conversion of the styrylflavylim cations into equilibrium mixtures containing essentially Ct follow a pH-dependent bell-shaped curve in both networks. While at pH = 1 in the dark, AH(+) evolves to an equilibrium mixture containing predominantly AH(+)(iso), irradiation at λ > 435 nm induces the opposite conversion.     

Self-assembly of chiral molecular honeycomb networks on Au(111)

Self-assembly of the specifically designed 3-fold symmetric 1,3,5-trikis(4'-carboxylphenyl)-2,4,6-trikis(4'-tert-butylphenyl)-benzene molecule on a Au(111) surface is investigated by means of in situ ultrahigh vacuum scanning tunneling microscopy. A variety of chiral honeycomb networks with increasing interpore distance is observed. Experiments and force field calculations reveal that the formation of the two-dimensional hexagonal porous networks is driven by a balance of molecular close-packing within half-unit cells and cyclic hydrogen bonding dimerization between half-unit cells. The honeycomb networks are shown to be chiral owing to asymmetric molecular close-packing within the half-unit cells.     

Chiral structures of 6,12-dibromochrysene on Au(111) and Cu(111) surfaces

Nanoscale low-dimensional chiral architectures are increasingly receiving scientific interest, because of their potential applications in many fields such as chiral recognition, separation and transformation. Using 6,12-dibromochrysene (DBCh), we successfully constructed and characterized the large-area two-dimensional chiral networks on Au(111) and one-dimensional metal-liganded chiral chains on Cu(111) respectively. The reasons and processes of chiral transformation of chiral networks on Au(111) were analyzed. We used scanning tunneling spectroscopy (STS) to analyze the electronic state information of this chiral structure. This work combines scanning tunneling microscopy (STM) with non-contact atomic force microscopy (nc-AFM) techniques to achieve ultra-high-resolution characterization of chiral structures on low-dimensional surfaces, which may be applied to the bond analysis of functional nanofilms. Density functional theory (DFT) was used to simulate the adsorption behavior of the molecular and energy analysis in order to verify the experimental results.     

Elasticity of model poly(oxypropylene) networks

The equilibrium stress-strain properties and the swelling behavior of moderately cross-linked model networks of poly(oxypropylene) were studied. Results were in general agreement with the theory of rubber elasticity due to Flory. However, data on the highly cross-linked networks (M?_c ≈ 725) could not be satisfactorily described by the recent theories of elasticity or swelling. This is believed to be primarily due to the marked non-Gaussian character of the very short network chains and the substantial chemical modification of the polymer by the cross-linking moiety which inevitably occurs at high cross-link densities.     

From poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) triblock copolymer to poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) hydrogels: Synthesis and rapid deswelling and reswelling behavior of hydrogels

Poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) (PNIPAAm‐b‐PEO‐b‐PNIPAAm) triblock copolymer was synthesized via the reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process with xanthate‐terminated poly(ethylene oxide) (PEO) as the macromolecular chain transfer agent. The successful synthesis of the ABA triblock copolymer inspired the preparation of poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) (PNIPAAm‐b‐PEO) copolymer networks with N,N′‐methylenebisacrylamide as the crosslinking agent with the similar approach. With the RAFT/MADIX process, PEO chains were successfully blocked into poly(N‐isopropylacrylamide) (PNIPAAm) networks. The unique architecture of PNIPAAm‐b‐PEO networks allows investigating the effect of the blocked PEO chains on the deswelling and reswelling behavior of PNIPAAm hydrogels. It was found that with the inclusion of PEO chains into the PNIPAAm networks as midblocks, the swelling ratios of the hydrogels were significantly enhanced. Furthermore, the PNIPAAm‐b‐PEO hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The accelerated deswelling and reswelling behaviors have been interpreted based on the formation of PEO microdomains in the PNIPAAm networks, which could act as the hydrophilic tunnels to facilitate the diffusion of water molecules in the PNIPAAm networks. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Unimodal and bimodal networks of poly(dimethyl-siloxane) in pure shear

Model networks of poly(dimethylsiloxane) (PDMS) were prepared by tetrafunctionally endlinking hydroxyl-terminated chains of various molecular weights. Some networks were prepared from mixtures of chains so as to yield a bimodal distribution of network chain lengths and, in some cases, these networks were prepared in solution. The stress–strain behavior of these unimodal and bimodal networks was studied in pure shear, which was imposed by stretching a sheet of the network having a large ratio of width to length in the direction perpendicular to the width. The pure-shear moduli of both types of networks generally were found to depend markedly on strain. Stress–strain isotherms for unimodal networks prepared from chains of one or the other of two molecular weights were well interpreted using the constrained-junction model of Flory and Erman. The bimodal networks showed large increases in the pure-shear modulus at high strains which were similar to those reported for uniaxial extension and compression. Endlinking in solution decreases the modulus in general and its upturn in particular, presumably because of diminished chain-junction entangling.     

Structural invariance in silver(I) coordination networks formed using flexible four-armed thiopyridine ligands

Two new isomeric, flexible four-armed thioether pyridine-containing ligands 1,2,4,5-tetrakis(3-pyridylmethylsulfanylmethyl)benzene (3tet) and 1,2,4,5-tetrakis(4-pyridylmethylsulfanylmethyl)benzene (4tet) were prepared and characterized. The ligand 3tet gave rise to three isomorphous 3-D networks when reacted with AgClO4 (1), AgPF6 (2), and AgCF3CO2 (3). The topology of the resulting networks was that of the pyrite net. The ligand 4tet gave rise to two isotopological 3-D networks when reacted with AgClO4 (4.2MeCN.2CHCl3) and AgPF6 (5.6MeCN). The topology of these networks was that of the rutile net. A third type of 3-D network of previously unknown topology was formed on reaction with AgCF3SO3 (6.3H2O). The network showed nodes with short topological terms 42.6 and 44.62.87.102. All six networks were binodal and based on three-connected Ag(I) nodes and six-connected ligand-centered nodes. In all of the networks the flexible ligands 3tet and 4tet showed two categories of ligand geometry which in all but one case gave rise to an interligand three-layered pi stack. The networks showed a remarkable lack of dependence on the nature of the counterion and solvent.     

Metal-organic coordination interactions in Fe-terephthalic acid networks on Cu(100)

Metal-organic coordination interactions are prime candidates for the formation of self-assembled, nanometer-scale periodic networks with room-temperature structural stability. We present X-ray photoelectron spectroscopy measurements of such networks at the Cu(100) surface which provide clear evidence for genuine metal-organic coordination. This is evident as binding energy shifts in the O 1s and Fe 3p photoelectron peaks, corresponding to O and Fe atoms involved in the coordination. Our results provide the first clear evidence for charge-transfer coordination in metal-organic networks at surfaces and demonstrate a well-defined oxidation state for the coordinated Fe ions.     

Intelligent networks based on poly(oxyethylene)

Films of PEO and PEO blends were efficiently crosslinked by exposure to ultraviolet radiation with high-pressure mercury lamp. Photochemical crosslinking proceeded in the presence of photoinitiator such as benzophenone or pentaerythritol triacrylate. PEO networks obtained by UV irradiation in the presence of potassium salts (thiocyanate, perchlorate and triflate) as templates showed enhanced cation binding ability for Li⁺ and Na⁺ cations. Cationic networks were prepared from crosslinked PEO modified with ethyl methacrylate dimethyl dodecyl ammonium bromide. Stimuli-sensitive hydrogels (pH and temperature) were prepared from combinations of PEO and poly-N-isopropyl acryl amide, polyvinyl methyl ether, polyvinyl acetate and poly-2-vinyl pyridine subjected to UV irradiation.