斜波压缩下HMX晶体的弹塑性行为

开展了（010）、（011）晶向HMX晶体的斜波压缩实验,获得了约15 GPa压力下的速度响应剖面。实验结果表明,HMX单晶存在明显弹塑性转变行为,且速度波形有下降趋势,这是材料的黏性效应导致,材料的弹性极限随着样品厚度增加而变化,不同晶向的材料动力学特性存在差异。结合Hobenemser-Prager黏弹塑性本构关系和三阶Birch-Murnaghan物态方程开展了HMX晶体斜波压缩物理过程的数值模拟,计算结果可以很好地描述HMX晶体的弹塑性转变这一物理过程。     

纯铁材料的冲击相变与"反常"层裂

采用VISAR、X射线衍射和金相处理联合测试分析技术,开展等厚对称碰撞实验,研究了纯铁材料的冲击相变与层裂行为特征。结果发现,冲击加载压力大于纯铁材料相变阈值(13 GPa)时,等厚对称碰撞样品发生反常2次层裂。结合相关文献的实验结果,从应力波相互作用的角度分析了反常层裂形成的原因,指出纯铁材料的冲击相变和卸载逆转变及引发的稀疏冲击波是导致反常2次层裂的物理机制。     

低相变阈值金属高压加载下的相变层裂特性

采用激光速度干涉仪（VISAR）和X光联合测试技术,在冲击压力远高于相变应力加载下,实验研究低相变阈值金属FeMnNi合金的相变层裂特性,结果发现等厚对称碰撞加载下FeMnNi合金出现反常的层裂行为。针对该反常的层裂行为,利用塑性波、相变波、稀疏波和逆相变引发的稀疏冲击波的相互作用过程进行分析,结果表明,该实验状态下FeMnNi合金样品存在相变和逆相变行为,逆相变引发的稀疏冲击波是导致反常层裂行为的主要因素。     

FeMnNi合金的冲击相变和层裂特性的实验研究

对FeMnNi合金进行了轻气炮平板撞击实验研究,实验中材料发生了相变和层裂。得到的FeMnNi合金的相变阈值压力为6.3~6.9 GPa,远低于纯铁的相变阈值压力13 GPa,说明Mn、Ni合金元素的加入会极大的降低相变阈值。回收试样观测表明,当应力高于FeMnNi合金的相变阈值时,样品中可能产生二次层裂现象和浅表层裂新现象。实验结果还表明该合金相变后层裂强度没有明显的提高。     

混凝土材料的层裂特性

利用Hopkinson压杆作为实验设备,通过试件后面吸收杆上应变波形研究了混凝土材料的层裂特性。不同强度混凝土在不同加载率下的实验结果表明,混凝土层裂强度与其压缩强度以及加载速率有关,给出了层裂强度和压缩强度以及加载率之间关系的经验公式,并指出不同加载速度下混凝土裂纹扩展方式不同是层裂强度率效应的主要原因。加载压缩波损伤的影响、重复加载实验以及多次层裂的顺序都表明,损伤对混凝土的层裂过程有重要影响。     

纯钒在冲击加载下的动态拉伸断裂和弹性波衰减特性

利用平板撞击和激光干涉测速技术，实验研究了国产热等静压纯钒在压力5.2~9.0 GPa、拉伸应变率0.47×105~1.19×105 s-1冲击加载下的层裂特性。结果表明:国产热等静压纯钒具有较强的抗动态拉伸断裂能力，其层裂强度在4.0~5.3 GPa范围，明显高于相似加载条件下文献给出的熔炼钒结果，这主要与热等静压加工工艺下纯钒杂质含量更低、内缺陷更少有关；同时，纯钒层裂强度对冲击压力和拉伸应变率均比较敏感。此外，对弹塑性加载速度剖面的分析发现:在6 mm样品厚度范围，纯钒的弹性波幅值随样品厚度增大而减小，雨贡纽弹性极限随样品厚度的衰减规律较好地满足指数关系σ_HEL=3.246（h_s/h₀）-0.386，h₀为单位长度。     

Influence of Phase Transition on Spalling Behavior in FeMnNi alloy

通过逆向加载和等厚对称碰撞实验相结合的方法,确定了FeMnNi合金完整的加卸载物理过程和相变层裂特征。采用修正的Boettger模型与非平衡两相相变理论模型,成功模拟再现了实验过程,解释了冲击相变、卸载逆相变及稀疏冲击波形成的物理机理。实验和数值模拟相结合,从应力波相互作用的角度定量分析了层裂发生的原因,指出层裂发生的机制正是由于受载样品发生了冲击相变和卸载逆相变。     

冲击相变对FeMnNi合金层裂行为影响研究

通过逆向加载和等厚对称碰撞实验相结合的方法,确定了FeMnNi合金完整的加卸载物理过程和相变层裂特征。采用修正的Boettger模型与非平衡两相相变理论模型,成功模拟再现了实验过程,解释了冲击相变、卸载逆相变及稀疏冲击波形成的物理机理。实验和数值模拟相结合,从应力波相互作用的角度定量分析了层裂发生的原因,指出层裂发生的机制正是由于受载样品发生了冲击相变和卸载逆相变。      

钢纤维混凝土的层裂特征

利用大直径Hopkinson压杆作为实验设备,通过试件后面的吸收杆应变波形分析了钢纤维增强混凝土的层裂特征。实验结果表明,钢纤维混凝土的层裂强度与钢纤维含量、混凝土压缩强度以及加载速率有关,并给出了经验公式。和素混凝土相比,钢纤维混凝土具有更高的层裂强度和更好的阻止损伤演化和裂纹扩展的能力。高速摄影结果表明,钢纤维混凝土层裂时,层裂段的飞离是由于陷在层裂段中应力波的动量效应,而且在层裂段中不易出现再次层裂的现象。这些现象和相同加载条件下素混凝土的层裂破坏有明显差别,说明钢纤维可以很好地提高混凝土抗层裂能力,其结论对相关的数值模拟和防护工程设计有重要意义。     

HR2钢及几种铁基材料的冲击相变行为

利用双灵敏度VISAR测量了抗氢钢HR2、工业纯铁DT2和铁锰镍合金FeMnNi在一维应变冲击载荷下的自由面速度历史,结合受载样品的回收分析对其动载行为和断裂表现进行了分析。研究表明,在实验加载压力范围内DT2和FeMnNi样品的自由面速度历史呈现包括相变波在内的典型三波结构,而对HR2钢,尽管金相分析显示其加载前后样品的相组织已发生变化,但速度剖面呈现的仅是典型的弹塑性双波结构。分析认为溶质材料成分和初始相组织是无相变波的主要原因。从冲击相变和卸载逆相变角度解释了在等厚靶碰撞时DT2和FeMnNi材料中出现的多重层裂、浅表层裂现象。     

A model for plasticity kinetics and its role in simulating the dynamic behavior of Fe at high strain rates

The recent diagnostic capability of the Omega laser to study solid-solid phase transitions at pressures greater than 10 GPa and at strain rates exceeding 10⁷ s⁻¹ has also provided valuable information on the dynamic elastic-plastic behavior of materials. We have found, for example, that plasticity kinetics modifies the effective loading and thermodynamic paths of the material. In this paper we derive a kinetics equation for the time-dependent plastic response of the material to dynamic loading, and describe the model’s implementation in a radiation-hydrodynamics computer code. This model for plasticity kinetics incorporates the Gilman model for dislocation multiplication and saturation. We discuss the application of this model to the simulation of experimental velocity interferometry data for experiments on Omega in which Fe was shock compressed to pressures beyond the α-to-ε phase transition pressure. The kinetics model is shown to fit the data reasonably well in this high strain rate regime and further allows quantification of the relative contributions of dislocation multiplication and drag. The sensitivity of the observed signatures to the kinetics model parameters is presented.     

单晶与纳米多晶锡层裂的分子动力学研究

低熔点金属的层裂是目前延性金属动态断裂的基础科学问题之一。采用非平衡态分子动力学方法模拟了冲击压力在13.5～61.0 GPa下单晶和纳米多晶锡的经典层裂和微层裂过程。研究结果表明：在加载阶段,冲击速度不影响单晶模型中的波形演化规律,但影响纳米多晶模型中的波形演化规律,其中经典层裂中晶界滑移是影响应力波前沿宽度的重要因素;在单晶模型中,经典层裂和微层裂中孔洞成核位置位于高势能处;在纳米多晶模型中,经典层裂中的孔洞多在晶界（含三晶界交界处）处成核,并沿晶定向长大,产生沿晶断裂,而微层裂中孔洞在晶界和晶粒内部成核,导致沿晶断裂、晶内断裂和穿晶断裂;孔洞体积分数呈现指数增长,相同冲击速度下单晶和纳米多晶Sn孔洞体积分数变化规律一致;经典层裂中孔洞体积分数曲线的两个转折点分别表示孔洞成核与长大的过渡和材料从损伤到断裂的灾变性转变。     

Phase transition and dynamics of iron under ramp wave compression

The ramp wave compression experiments of iron with different thicknesses were performed on the magnetically driven ramp loading device CQ-4. Numerical simulations of this process were done with Hayes multi-phase equation of state (H-MEOS) and dynamic equations of phase transition. The calculated results of H-MEOS are in good agreement with those of shock phase transition, but are different from those under ramp wave compression. The reason for this is that the bulk modulus of the material in the Hayes model and the wave velocity are considered constant. Shock compression is a jump from the initial state to the final state, and the sound speed is related to the slope of the Rayleigh line. However, ramp compression is a continuous process, and the bulk modulus is no longer a constant but a function of pressure and temperature. Based on Murnaghan equation of state, the first-order correction of the bulk modulus on pressure in the Hayes model was carried out. The numerical results of the corrected H-MEOS agree well with those of pure iron in both ramp and shock compression phase transition experiments. The calculated results show that the relaxation time of iron is about 30 ns and the phase transition pressure is about 13 GPa. There are obvious differences between the isentropic and adiabatic process in terms of pressure–specific volume and temperature–pressure. The fluctuation of the sound speed after 13 GPa is caused by the phase transition.     

爆轰加载下金属锡层裂破碎数值模拟

对爆轰加载下低熔点金属锡的层裂破碎问题开展了数值模拟。在利用实验数据对所采用数值方法和材料模型开展对比验证的基础上，通过对样品内部物理量时间及空间分布演化对比分析，剖析了冲击加-卸载中样品内部应力波与材料相互作用过程。此外，通过对比分析不同厚度锡样品在爆轰加载下的动态行为特征，进一步认识了自由面反射稀疏波、边侧稀疏波和入射稀疏波共同作用下层裂破碎演化机制。结果表明，当样品较薄时，层裂破碎行为由反射稀疏波主导；随着样品厚度的增大，反射稀疏波主导区缩小，入射稀疏波和边侧稀疏波主导区逐渐增大。     

Spallation of polycarbonate under laser-driven shocks

Laser driven shocks have been used to investigate dynamic failure (spallation) of polycarbonate under uniaxial tensile loading at very high strain rate, of the order of 10 s. First, uninstrumented recovery shots have been performed, post-test examination of the fracture damage has been carried out, and the influences of the experimental parameters (loading conditions and target thickness) have been analyzed. Then, an attempt to model the response of polycarbonate to plane shock loading has been made. On one hand, in-situ measurements have been performed in polycarbonate samples submitted to the plane detonation wave of a strong explosive, and the results have led to content with simple constitutive relations. On the other hand, piezoelectric measurements under laser shocks have provided a characterization of the loading pressure pulse, and comparisons of the measured and computed signals have confirmed the ability of the model to describe wave propagation in polycarbonate. Finally, the spallation experiments have been simulated. A spall strength has been estimated, on the basis of the experimental data, and the predictive capability of the model has been tested. Received: 18 February 1997 / Accepted 1 April 1997