Solubility in the Na,СаǁSO<Subscript>4</Subscript>,СО<Subscript>3</Subscript>–H<Subscript>2</Subscript>O system at 0°С

Solubility at the invariant points of the Na,Са∥SO₄,СО₃–H₂O system at 0°C was studied, and a solubility diagram at this temperature constructed.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Solubility in the Na,Са||SO<Subscript>4</Subscript>,СО<Subscript>3</Subscript>–H<Subscript>2</Subscript>O system at 25°С

Solubility at the invariant points of the Na,Са||SO₄,СО₃–H₂O system at 25°C was studied, and a solubility diagram at this temperature constructed.     

Phase ratios in the M<Subscript>2</Subscript>O-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SO<Subscript>3</Subscript> (M = Rb,Cs) systems and the properties of the compounds formed in these systems

Powder X-ray diffraction and microscopy have been used to study phase ratios of the M₂O-V₂O₅-SO₃ (M = Rb, Cs) systems, which model the active component of rubidium-vanadium and cesium-vanadium catalysts for sulfuric acid production at high sulfur dioxide conversions. We have stated that each system forms four compounds: M₃VO₂(SO₄)₂, MVO₂SO₄, M₄V₂O₃(SO₄)₄, and MVO(SO₄)₂. The thermal properties of these compounds and their interaction with water vapor saturated at room temperature have been studied. The unit cell parameters have been determined for the compounds MVO₂SO₄ (M = K, Rb), MVO(SO₄)₂, and M[VO₂(SO₄)(H₂O)₂] · H₂O (M = Rb, Tl). The reciprocal transformations of the components and phases of the M₂O-V₂O₅-SO₃ systems match the Lux-Flood ideas of the acid-base properties of oxide compounds.     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003     

Phase Equilibria in the K,Cа∥SO<Subscript>4</Subscript>,CO<Subscript>3</Subscript>,HCO<Subscript>3</Subscript>–H<Subscript>2</Subscript>O System at 25°С

Phase equilibria in the system K,Cа∥SO₄,CO₃,HCO₃–H₂O have been studied at 25°С. This system at 25°С involves 7 invariant points, 21 monovariant curves, and 22 divariant fields. The data gained served to plot the first phase diagram (phase complex) of the studied system at 25°С.     

Glass formation in the Al(IO<Subscript>3</Subscript>)<Subscript>3</Subscript>-Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-HIO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

On the basis of experimental data obtained in the study of glass-formation boundaries in the Al₂(SO₄)₃-HIO₃-H₂O, Al(IO₃)₃-Al₂(SO₄)₃-H₂O, and Al(IO₃)₃-HIO₃-H₂O systems and using geometrical analysis, we predict the positions of glass-formation boundaries in the Al(IO₃)₃-Al₂(SO₄)₃-HIO₃-H₂O four-component system along 60, 40, and 25 wt % H₂O sections.     

Formation of Composites Based on CsHSO<Subscript>4</Subscript> and Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> and Mechanism of Their Protonic Conduction

Vibrational spectra of finely divided amorphous CsHSO₄,Cs₅H₃(SO₄)₄ · H₂O, and composites based on these are measured and analyzed. An analysis of the spectra indicates the occurrence of substantial changes in the system of hydrogen bonds and in the spectral range of the sulfate group of acid sulfates in the composites. Structural dynamics of the SO₄ tetrahedrons is in full conformance with protonic conduction and the data of x-ray diffraction analyses accompanied by differential scanning calorimetry. It is shown that mobility of protons in the composites increases. A mechanism of the formation of the composites and their conduction is proposed.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 640–645.Original Russian Text Copyright © 2005 by Ponomareva, Lavrova, Burgina.     

Synthesis,crystal structure,and luminescent property of a discrete Zn<Subscript>3</Subscript>L<Subscript>3</Subscript> metallomacrocycle constructed from 5-hydroxyisophthalic acid

An interesting discrete metallomacrocycle (MMC), [Zn₃(L)₃(H₂O)₆] · H₂O (I), has been prepared by means of self-assembly of Zn(II) salt, 5-hydroxyisophthalic acid (H₂L) as organic linker and 5,5’-(pyridine-2,6-diyl)diisophthalic acid (H₄L’) as structure-directing agentunder hydrothermal condition. In complex I, the planar trinuclearmetal-organic macrocycles are arranged into 2D sheet layers connected by strong hydrogen bonded between OH groups of the ligands. Then they stack into 3D supramolecular architecture in–ABAB–array way to give a small 1D open channel along the c axis (CIF file CCDC no. 1053024). Additionally, thermal stability and luminescence properties of I were also investigated.     

Antiferromagnetic coupling in [Mn<Subscript>12</Subscript>O<Subscript>12</Subscript>(O<Subscript>2</Subscript>CMe)<Subscript>6</Subscript>(<Emphasis Type="Italic">p</Emphasis>-CO<Subscript>2</Subscript>-phenyl nitronyl

The synthesis of [Mn₁₂O₁₂(O₂CMe)₆(p-CO₂-phenyl nitronyl nitroxide)₁₀(H₂O)₄]· 4H₂O, (1), by direct replacement of some of the acetate groups in [Mn₁₂O₁₂(O₂CMe)₁₆(H₂O)₄] · 4H₂O · 2MeCO₂H, (2), with the organic radical p-HO₂C-phenyl nitronyl nitroxide, (3), is reported. E.p.r. spectra show exchange narrowing in (1) due to coupling between the manganese ions and radicals. The isotropic hyperfine splitting constant from the manganese ions is a = 96 Oe at 5.5K. The magnetic susceptibility indicates antiferromagnetic exchange interactions between the manganese ions and the radicals with the Weiss constant = -25 K. The spin was determined to be S = 6 from magnetization data in the 2--30 K temperature range at 50 kOe, suggesting a mixture of ground state with excited states.     

Interactions in the NdF<Subscript>3</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>-MF<Subscript>2</Subscript> (M = Ba,Sr) systems

Isothermal anneals (at 873 K) and powder X-ray diffraction were used to study isothermal sections of phase diagrams of the NdF₃-Nd₂O₃-MF₂ (M = Ba, Sr) systems. In studying the NdF₃-Nd₂O₃-BaF₂ system, classical solid-phase synthesis was supplemented with mechanochemical activation of feedstock mixtures or BaF₂ activated with gaseous hydrogen fluoride was used. In both systems, a solid solution with the fluorite structure based on MF₂ and NdOF phases, a solid solution with the tysonite structure based on NdF₃, and an ordered fluorite-related phase Ba₄Nd₃F₁₇ were found. The NdOF-based solid solutions were shown to have polymorphism: β_trig ai α_cub at ≈800 K; a new trigonal phase of these solid solutions has been discovered. The effect of a dimensional factor $\left( {R_{Ba^{2 + } } > R_{Sr^{2 + } } } \right)$\left( {R_{Ba^{2 + } } > R_{Sr^{2 + } } } \right) on phase formation and unit cell parameters of the solid solutions was traced.     

Crystal structure of fluorosulfate complex compounds of indium(III) M<Subscript>2</Subscript>[InF<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)H<Subscript>2</Subscript>O] (M = K,NH<Subscript>4</Subscript>)

The crystal structures of isostructural mixed-ligand fluorosulfate complex compounds of indium(III) M₂[InF₃(SO₄)H₂O] (M = K, NH₄), formed of K⁺ cations, NH₄ ⁺ respectively, and complex [InF₃(SO₄)H₂O]^2– anions are determined. In the complex anion, the indium atom surrounded by three F atoms, the oxygen atom of the coordinated H₂O molecule, and two oxygen atoms of the bridging sulfate group forms a slightly distorted octahedron (CN 6). Via alternating bridging SO₄ groups, the polyhedra of In(III) atoms are arranged in polymer chains. The O–H???F hydrogen bonds organize the chains in a three-dimensional network. The K⁺ and NH₄ ⁺ cations are located in the structure framework and additionally strengthen it.     

Demetallation of α,β,γ,δ-tetrakis(p-sulfophenyl) porphiniron(III) in mineral acid–alcohol–water media

Demetallation rates of α,β,γ,δ-tetrakis(p-sulfophenyl)porphiniron(III) in hydrochloric acid–ethanol–water, perchloric acid–ethanol–water, and sulfuric acid–alcohol–water media were determined. For a given acidity value H₀ the order of the rates for the three acids was HCl > H₂SO₄ > HClO₄. This is also the order for complex formation between acid anion and iron(III). Consequently ligands as well as protons are involved in the breaking of bonds between the metal and the porphyrin leading to the formation of the activated complex. The log k values for HCl and HClO₄ media were not linearly related to the Hammett acidity function as they were for sulfuric acid–ethanol–water media. The average ΔH? and ΔS?values for the HCl media were 18.4 ± 1.4 kcal/mol and ? 19 ± 3 cal K mol, respectively, in very close agreement with those for H₂SO₄ media despite the difference in H ₀ dependence. For H₂SO₄–alcohol–water media the order of the rates was butanol > propanol > ethanol with little difference between isomeric alcohols.     

Synthesis,characterization and very strong luminescence of a new 3 D europium sulfate Eu<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>

A new 3 D europium sulfate Eu₂(H₂O)₄(SO₄)₃ 1 is synthesized solvothermally and characterized by single crystal X-ray diffraction, IR spectrum, TG, powder XRD, and ultraviolet excitation and emission spectrum. This compound crystallizes in the triclinic system with the space group P-1, a = 6.7520(9) Å, b = 9.1077(12) Å, c = 10.5910(14) Å, α = 94.432(2)°, β = 107.1170(10)°, γ = 99.160(2)°, V = 609.17(14) ų, Z = 2. The open framework of the title compound is an eight-membered ring channel along the crystallographic a-axis, which is built up by EuO₈ polyhedra and SO₄ tetrahedra.     

Synthesis,structure, and properties of V<Subscript>2</Subscript>O<Subscript>3</Subscript>(XO<Subscript>4</Subscript>)<Subscript>2</Subscript> (X = S,Se)

Compounds described as V₂O₃(XO₄)₂, where X = S or Se, were prepared from vanadium(V) oxide mixtures with concentrated sulfuric and selenic acids. The physicochemical properties of the products were studied; for V₂O₃(SeO₄)₂, the crystal structure was determined by powder X-ray diffraction and neutron diffraction, and its key differences from the structure of V₂O₃(SO₄)₂ were identified. V₂O₃(SeO₄)₂ crystallizes in the monoclinic system with the unit cell parameters a = 15.3831(2)Å, b = 5.54096(5)Å, c = 9.71644(7)Å, β = 111.886(1)°, V = 768.51ų, space group C2/c (no. 15).     

Synthesis,phase formation,and thermal expansion of sulfate phosphates with the NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> structure

The NaFeZr(PO₄)₂SO₄ and Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 sulfate phosphates with the NaZr₂(PO₄)₃ (NZP) structure were synthesized and studied using X-ray diffraction, electron microprobe analysis, IR spectroscopy, and simultaneous differential thermal and thermogravimetric analysis. The phase formation and thermal stability of the compounds were studied by powder X-ray diffraction and DTA–TG. The Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 structure was refined by full-profile analysis. The structure framework is composed of randomly occupied (Fe,Zr)O₆ octahedra and (P,S)O₄ tetrahedra; the Pb²⁺ ions occupy extra-framework sites. The thermal expansion of Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 in the temperature range from–120 to 200°C was studied by temperature X-ray diffraction. In terms of the average linear coefficient of thermal expansion (α_av = 1.7 × 10^–6°C^–1), this compound can be classified as having low expansion. The combination of different tetrahedral anions (a phosphorus and a smaller sulfur one) in the NZP resulted in a decrease in the framework size and cavities and enabled the preparation of low-expansion sulfate phosphate with a smaller extra-framework cation (cheap Pb) instead of larger cations (Cs, Ba, Sr) used most often in the monoanionic phosphates.     

K<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>: Formation conditions,crystal structure,and physicochemical properties

Potassium oxosulfatovanadate(V) K₃VO₂(SO₄)₂ has been obtained by solid-phase synthesis from K₂SO₄, K₂S₂O₇, and V₂O₅ (2: 1: 1), and its formation conditions, crystal structure, and physiochemical properties have been studied. The conversions of K₃VO₂(SO₄)₂ in contact with potassium vanadates and other potassium oxosulfatovanadates(V) are considered in terms of phase relations in the K₂O-V₂O₅-SO₃ system, which models the active component of vanadium catalysts for sulfur dioxide oxidation into sulfur trioxide. The X-ray diffraction pattern of K₃VO₂(SO₄)₂ is indexed in the monoclinic system (space group P2₁) with unit cell parameters of a = 10.0408(1) Å, b = 7.2312(1) Å, c = 7.3821(1) Å, β = 104.457(1)°, Z = 2, and V = 519.02 ų. The crystal structure of K₃VO₂(SO₄)₂ is built from [VO₂(SO₄)₂]^3? complex anions, in which the vanadium atom is in an octahedral oxygen environment formed by two terminal oxygen atoms (V-O(6) = 1.605(7) Å, V-O(10) = 1.619(7) Å and four oxygen atoms of the two chelating sulfate anions. The vibrational spectra of K₃VO₂(SO₄)₂ are analyzed using these structural data.     

Synthesis,structure, and properties of M<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> (M = Rb,Cs)

Vanadium(V) complexes of general composition M₃VO₂(SO₄)₂ (M = Rb, Cs) were synthesized by a solid-state route. The individuality of the synthesized compounds was proved by X-ray and neutron diffraction, vibrational spectroscopy, and microscopic analysis. The X-ray diffraction patterns of M₃VO₂(SO₄)₂ were indexed to fit the monoclinic system (space group P2/c, Z = 4) with the following unit cell parameters: a = 11.6487(2) Å, b = 8.4469(2) Å, c = 12.1110(2) Å, β = 109.483(1)°, V = 1123.43 ų (Rb); a = 12.0546(3) Å b = 8.7706(2) Å, c = 12.6496(3) Å, β = 109.843(2)°, V = 1257.99 ų (Cs). In the crystal structure of M₃VO₂(SO₄)₂, [VO₂(SO₄)₂]^3? complex anions can be discerned in which the vanadium atom is surrounded by five oxygen atoms: two oxygen atoms form short terminal V–O bonds, and three oxygen atoms are from the two sulfato groups, one of which acts as a monodentate ligand and the other acts as a bidentate chelating ligand.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.