O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

Potential energy of <Superscript>∞</Superscript>H<Stack><Subscript>2</Subscript><Superscript>-</Superscript></Stack>(<Superscript>2</Superscript>∑<Stack><Subscript>u</Subscript><Superscript>+</Superscript></Stack> in the bound-state region

An accurate calculation of the lowest negative electronic state of H ₂ ^- (fixed nuclei) is reported using the CCSD(T) method and doubly augmented cc-pv5z basis set. Comparison has been made with the reference data by Senekowitsch et al. [Chem. Phys. Lett. 111 (1984) 211]. Owing to larger size of the basisset and inclusion of triple excitations, no vertical shift in this work is necessary to reproduce the asymptotics of H + H ^-. In addition, the effect of basis-set truncation is estimated, based on the complete-basis-set extrapolation method. The contribution of correlated electron-proton motion to the electron-energy curve for H₂ ^– dynamics is pointed out.Dedicated to Prof. Jií Horáek on the occasion of his 60th birthday.     

EIT Ground State Cooling Scheme of <Superscript>171</Superscript>Yb<Superscript>+</Superscript> Based on the <Superscript>2</Superscript>S<Subscript>1/2</Subscript>→<Superscript>2</Superscript>P<Subscript>1/2</Subscript> Cooling Transition

We propose a method for EIT ground state cooling of ¹⁷¹Yb+ ion, which involves three light fields with detuning on a MHz scale. The steady-state mean vibrational quantum number is calculated to be less than 0.005. Efficient cooling is achievable in a motional-mode frequency range of 2π · (1.5 ± 0.5 MHz).     

Concentration quenching of Eu<Superscript>2+</Superscript> in a novel blue–green emitting phosphor: Ba<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript>

A novel blue–green emitting phosphor Ba₂ZnSi₂O₇: Eu²⁺ was prepared by a combustion synthesis (CS) method. An efficient green emission under conditions ranging from ultraviolet to visible light was observed. The emission spectrum shows a single intensive band centered at 503 nm, which corresponds to the 4f ⁶5d ¹→4f ⁷ transition of Eu²⁺. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in Ba₂ZnSi₂O₇:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole–dipole interaction. The value of the critical transfer distance is calculated as 19 Å, which is in good agreement with the value (20 Å) derived from the experimental data.     

Calix[4]arene Based Dual Fluorescent Sensor for Al<Superscript>3+</Superscript> and S<Subscript>2</Subscript>O<Subscript>7</Subscript><Superscript>2−</Superscript>

Specific functionalized calix[4]arene based fluorescent chemosensor was synthesized for cations and anions binding efficiency examination. Receptor C4MA displayed strong affinity for Al³⁺and S₂O₇ ^2? with enhanced fluorescence intensity. The selective response of C4MA was investigated in the presence of different co-existing competing ions. The limit of detection (LOD) of Al³⁺and S₂O₇ ^2? was calculated as 2.8?×?10^?6 M and 2.6?×?10^?7 M respectively. Sensor C4MA forms (1:1) stoichiometric complex with both Al³⁺ and S₂O₇ ^2? and their binding constants were calculated as 12.1?×?10⁴ and 8.3?×?10³ respectively. Complexes were also characterized through FT-IR spectroscopy.

Open image in new window

Graphical Abstract ?

     

Photoluminescence of sol–gel-derived Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> thin-film phosphors with Mg<Superscript>2+</Superscript> and Al<Superscript>3+</Superscript> co-doping

Red-light-emitting Y₂O₃:Eu³⁺ thin-film phosphors were synthesized using a sol–gel process. The effect of Mg²⁺ and Al³⁺ co-dopants on the Y₂O₃:Eu³⁺ thin-film phosphor photoluminescence (PL) property was investigated. At a certain concentration, both Mg²⁺ and Al³⁺ co-dopants were found to further enhance the PL emission intensity of Y₂O₃:Eu³⁺ thin-film phosphors. The optimum PL emission intensity was observed in Y₂O₃:12%Eu³⁺, 7%Mg²⁺ and Y₂O₃:12%Eu³⁺, 2%Al³⁺ phosphor films. From our results, the enhancement of the emission intensity by the Mg²⁺ and Al³⁺ co-dopants is explained in terms of the creation of defect states near the Y(4d+5s) conduction band, which overlap with the Eu³⁺ charge-transfer state (CTS). The overlapping leads to CTS broadening and consequently induces higher absorption and hence an increase of the emission intensity. From X-ray diffraction results, we have found that there is no additional phase formed in the co-doped phosphor films. PACS 68.55.Ln; 78.55.-m; 81.20.Fw     

<Superscript>2</Superscript>H NMR investigation of the transition to the proton glass state in the Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> · 0.5H<Subscript>2</Subscript>O crystal

A crystal of the Cs₅H₃(SO₄)₄ · xH₂O (x ≈ 0.5) (PCHS) compound, which belongs to the family of proton conductors with a complex system of hydrogen bonds, is investigated by ²H NMR spectroscopy. The temperature and orientation dependences of the ²H NMR spectra are measured and analyzed. It is established that, upon transition to the glassy phase at the temperature T _g = 260 K, the parameters characterizing the proton exchange between positions in hydrogen bonds remain unchanged to within the limits of experimental error. The protons in the two-dimensional network of hydrogen bonds in the (001) plane are dynamically disordered over possible positions down to temperatures considerably lower than the glass transition point T _g . However, water molecules are fixed at particular structural positions in the phase transition range. In PCHS crystals with a nonstoichiometric water content, this circumstance can be responsible for the frustration that leads to the formation of the glassy state.     

Odd autoionizing 2p<Subscript>1/2</Subscript><Superscript>5</Superscript>n(s<Superscript>′</Superscript>/d<Superscript>′</Superscript>) resonances of Ne excited from the 2p<Superscript>5</Superscript>3p[K]<Subscript>J</Subscript> states

Absolute photoionization cross sections for Ne atoms in the excited levels (Paschen notation ) were calculated at near threshold energies within the configuration interaction Pauli-Fock approach including core polarization. The computed spectra and the lineshape parameters of the odd parity 2p_1/2 ⁵ns^′/d^′ autoionizing resonances are found to be in good agreement with high resolution laser spectroscopic results. Guided by the theoretical results, improved analyses of the measured spectra by superimposed Fano-type profiles were achieved. Theoretical predictions are presented for resonances which have not yet been studied experimentally. In addition, we report the absolute partial photoionization cross sections for the ²P_3/2 and ²P_1/2 channel at photoelectron energies up to 7 eV. Except for the highest lying 2p₁(¹S₀) level, these cross sections monotonically decrease with energy (as reported earlier in single-electron calculations for the Ne(2p⁵3p) configuration) with branching ratios which essentially reflect the core composition of the 2p_x levels. For the 2p₁ level the resonance structure and the partial cross sections are strongly influenced by a Cooper-Seaton minimum in the d_3/2 ^′ channel,located just above the ²P_1/2 ionization limit.     

Analysis of the vector form factors f<Superscript>+</Superscript><Subscript>Kπ</Subscript>(Q<Superscript>2</Superscript>) and f<Superscript>-</Superscript><Subscript>Kπ</Subscript>(Q<Superscript>2</Superscript>) with light-cone QCD sum rules

In this article, we calculate the vector form factors f⁺ _Kπ(Q²) and f^- _Kπ(Q²) within the framework of the light-cone QCD sum rule approach. The numerical values of f⁺ _Kπ(Q²) are compatible with existing theoretical calculations, and the central value of f⁺ _Kπ(0) (f⁺ _Kπ(0)=0.97) is in excellent agreement with the values from chiral perturbation theory and lattice QCD. The values of |f^- _Kπ(0)| are very large compared to the theoretical calculations and experimental data, and they cannot give any reliable prediction. At large momentum transfer with Q² > 5 GeV², the form factors f⁺ _Kπ(Q²) and |f^- _Kπ(Q²)| can either show the asymptotic behavior of or decrease more quickly than ; more experimental data are needed to select the ideal sum rules. PACS 12.38.Lg; 12.38.Bx; 12.15.Hh     

Visualization of 2-μm radiation by BiF<Subscript>3</Subscript>:Ho<Superscript>3+</Superscript> and BiF<Subscript>3</Subscript>:Ho<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> ceramics

A series of ceramic samples of the compositions BiF₃:1%Ho³⁺, BiF₃:4%Ho³⁺, BiF₃:1%Ho³⁺ + 1%Yb³⁺, and BiF₃:1%Ho³⁺ + 3%Yb³⁺ is synthesized and the conversion of Tm:YLF laser radiation (λ = 1908 nm) is studied. The luminescence spectra exhibit bands in the regions of 490, 545, and 650 nm. The kinetic measurements of the afterglow of the green and red bands show that the population of the ⁵S₂ and ⁵F₄ states in the BiF₃:1%Ho³⁺ samples occurs due to successive absorption of excitation photons, while the ⁵F₅ level of Ho³⁺ is populated due to the ion–ion interaction. Codoping with Yb³⁺ leads to a decrease in the visualization threshold power density to 2 W/cm².     

Origin of the structural local transition in the molecular impurity ion MnO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> in the K<Subscript>3</Subscript>Na(CrO<Subscript>4</Subscript>)<Subscript>2</Subscript> ferroelastic

A new model is proposed for a local transition in a Jahn-Teller impurity center in a crystal with a ferroelastic (ferroelectric) phase transition. This model is based on direct interaction of the order parameter of the phase transition in the matrix with the Jahn-Teller impurity degrees of freedom. It is shown that, under these conditions, the order parameter field can induce lifting of degeneracy of the electronic states active in the Jahn-Teller effect, which is accompanied by a transition from the Jahn-Teller effect to the pseudo-Jahn-Teller effect with its subsequent suppression. As a result, a decrease in temperature gives rise to a structural local transition in the region of the low-symmetry ferroelastic (ferroelectric) matrix phase from the many-well local adiabatic to a single-well potential. The model proposed allows interpretation of experimental data obtained in an EPR study of the molecular impurity ion MnO ₄ ^2? in the K₃Na(CrO₄)₂ ferroelastic.     

<Superscript>57</Superscript>Fe emission Mössbauer spectroscopy following dilute implantation of <Superscript>57</Superscript>Mn into In <Subscript>2</Subscript>O<Subscript>3</Subscript>

Emission Mössbauer spectroscopy has been utilised to characterize dilute ⁵⁷Fe impurities in In ₂O₃ following implantation of ⁵⁷Mn (T _1/2 = 1.5 min.) at the ISOLDE facility at CERN. From stoichiometry considerations, one would expect Fe to adopt the valence state 3 + , substituting In ³⁺, however the spectra are dominated by spectral lines due to paramagnetic Fe²⁺. Using first principle calculations in the framework of density functional theory (DFT), the density of states of dilute Fe and the hyperfine parameters have been determined. The hybridization between the 3d-band of Fe and the 2p band of oxygen induces a spin-polarized hole on the O site close to the Fe site, which is found to be the cause of the Fe²⁺ state in In ₂O₃. Comparison of experimental data to calculated hyperfine parameters suggests that Fe predominantly enters the 8b site rather than the 24d site of the cation site in the Bixbyite structure of In ₂O₃. A gradual transition from an amorphous to a crystalline state is observed with increasing implantation/annealing temperature.     

Hyperfine Interactions in Pb<Superscript>3+</Superscript>F<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack>F<Stack><Subscript>a</Subscript><Superscript>−</Superscript></Stack> clusters in fluorite crystals

The parameters of hyperfine interactions in Pb³⁺F ₈ ^? F _a ^? tetragonal clusters of MeF₂ crystals (Me=Ca, Sr, Ba) are interpreted. The contributions of the spin polarization to the parameters of the proper hyperfine interaction and additional (ligand) hyperfine interactions are calculated in the approximation of weak binding between a charge-compensating ion F _a ^? and a cubic fragment in the tetragonal cluster. It is demonstrated that correct inclusion of the contributions from the spin polarization to the ligand isotropic hyperfine interaction for the F _a ^? ion leads to anomalously large parameters of this interaction for MeF₂ crystals. These results are in agreement with experimental data.     

Optimizing after-glow luminescent parameters of Sr<Subscript>4</Subscript>Al<Subscript>14</Subscript>O<Subscript>25</Subscript>:Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript>, by sol–gel method and combustion process

Strontium aluminates are viewed as a promising persistent luminescent materials. There are many researches on strontium aluminates, including SrAl₂O₄, Sr₄Al₁₄O₂₅. Between these two phases, Sr₄Al₁₄O₂₅ shows much better properties than SrAl₂O₄. The traditional way to synthesize Sr₄Al₁₄O₂₅ is the solid state reaction. However, it exists few problems, especially non-homogeneous product. As a result, there are two methods chosen to make homogeneous precursor. One is sol–gel method, the other is combustion with Urea as a fuel. Boric acid is added as a flux in both method. In this study, combustion process is found to be a better way for synthesizing Sr₄Al₁₄O₂₅. We change the temperature, synthetic method. The samples are finely grinded and used for XRD analysis, photoluminescence measurement, and after-glow decay curve to figure out the optimizing luminescent parameters.     

CO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> radicals in synthetic hydroxyapatite

Powders of the B-type synthetic apatite exposed to gamma or ultraviolet irradiation were investigated using EPR spectroscopy. It was shown that ultraviolet irradiation leads to the appearance of the EPR spectrum near g = 2, which is similar to the spectrum observed upon gamma irradiation. The decomposition of the EPR spectra into components and the simulation of the shape of the experimental EPR signals revealed that these signals are associated primarily with two types of CO ₂ ^? radicals, namely, the axial CO ₂ ^? radicals and the orthorhombic CO ₂ ^? radicals. The differences in the shapes of the EPR spectra of the samples exposed to gamma and ultraviolet irradiation were explained by different ratios between the axial and orthorhombic CO ₂ ^? radicals. It was established that thermal annealing results in an increase in the relative contribution to the total EPR spectrum. This increase was explained by the transformation of the orthorhombic radicals into the axial radicals.     

High repetition rate LiF<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>: Color center laser

The efficient oscillation of LiF:F₂⁻ color center laser pumped by a compact LD-pumped Nd:YVO₄ acousto optically Q-switched laser with 30 kHz pulse repetition rate was demonstrated. The broadband oscillation with 75 μJ pulse energy and 37 kW peak power with the slope efficiency 20% was obtained. The average output power as high as 230 mW was reached. The narrow line tunable from 1.10 to 1.29 μm laser radiation with 10% conversion efficiency in the maximum of the tuning curve was achieved under pumping with 1.6 W average pump power.     

<Superscript>16</Superscript>O/<Superscript>18</Superscript>O oxygen isotope exchange kinetics in MnO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> as probed by <Superscript>55</Superscript>Mn NMR

The effect of the ¹⁶O ? ¹⁸O substitution in the coordination sphere of permanganate anion MnO ₄ ^? on the chemical shift of ⁵⁵Mn nuclei have been studied by ¹⁷O and ⁵⁵Mn NMR. Time constants τ _n,k of oxygen exchange in the water–permanganate anion system have been estimated. In nearly neutral solutions (pH ≈ 6.8–7.2), the oxygen exchange time is on the order of tens of hours. Bubbling gaseous HCl through this solution for a few seconds leads to the equilibrium distribution of oxygen isotopes in the manganese coordination sphere. The observed temperature dependences of isotope-induced ⁵⁵Mn NMR shifts in Mn¹⁶ O _44-n ¹⁸ O _n ^– (n = 0–4) have been treated as a result of rovibrational averaging of Mn–O bond lengths. The change in the Mn—O bond length in caused by the ¹⁶O → ¹⁸O isotope substitution is on the order of 10^–4 Å.     

Collisional broadening of CO<Subscript>2</Subscript> 10<Superscript>0</Superscript>0–00<Superscript>0</Superscript>1 transition absorption lines by N<Subscript>2</Subscript>O molecules

Relative coefficients of collisional broadening caused by N₂O molecules and their temperature dependences are determined for absorption lines (10⁰0–00⁰1 transition, R-branch) of the CO₂ molecule.     

Porous sulfated metal oxide SO<Subscript>4</Subscript><Superscript>2−</Superscript>/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> as an anode material for Li-ion batteries with enhanced electrochemical performance

Sulfated metal oxide SO₄ ^2?/Fe₂O₃ was prepared by a novel facile sol–gel method combined with a subsequent heating treatment process. The as-synthesized products were analyzed by XRD, FTIR, and FE-SEM. Compared with the unsulfated Fe₂O₃, the agglomeration of particles has been alleviated after the incorporation of SO₄ ^2?. Interestingly, the primary particle size of the SO₄ ^2?/Fe₂O₃ (about 5 nm) is similar to its normal counterparts even after the calcination treatment. More importantly, SO₄ ^2?/Fe₂O₃ exhibits a porous architecture, which is an intriguing feature for electrode materials. When used as anode materials in Li-ion batteries, SO₄ ^2?/Fe₂O₃ delivered a higher reversible discharge capacity (992 mAh g^?1), with smaller charge transfer resistance, excellent rate performance, and better cycling stability than normal Fe₂O₃. We believed that the presence of SO₄ ^2? and porous architecture should be responsible for the enhanced electrochemical performance, which could provide more continuous and accessible conductive paths for Li⁺ and electrons.