A new boronic acid fluorescent reporter that changes emission intensities at three wavelengths upon sugar binding

The boronic acid moiety is a very useful functional group for the preparation of sugar sensors. Along this line, water-soluble boronic acids that change fluorescent properties upon sugar binding are especially useful as reporter units in fluorescent sensors for carbohydrates. Herein, we report the discovery of a new water-soluble boronic acid (1, dibenzofuran-4-boronic acid) that exhibits unique fluorescence changes at three wavelengths upon binding with sugars under near physiological conditions.     

The design of boronic acid spectroscopic reporter compounds by taking advantage of the pK(a)-lowering effect of diol binding: nitrophenol-based color reporters for diols

The complex that forms between a boronic acid and a diol is often much more acidic than the starting boronic acid. In conditions where the solution pH is between the two pK(a) values, the boron atom will convert from a neutral trigonal form to an anionic tetrahedral form upon complexation. Such a change is likely to dramatically alter the electron density of neighboring groups. Utilizing this effect, we have designed and synthesized two nitrophenol-based boronic acid reporter compounds that change ionization states and therefore spectroscopic properties upon diol binding. Both compounds show significant UV changes upon addition of saccharides. For example, a blue shift of the absorption max from 373 to 332 nm was observed with the addition of D-fructose to 2-hydroxy-5-nitrophenylboronic acid at neutral pH. Such a reporter compound can be used as a recognition and signaling unit for the construction of polyboronic acid sensors for the selective and specific recognitions of saccharides of biological significance.     

Method Development of Enantiomer Separations by Affinity Capillary Electrophoresis,Cyclodextrin Electrokinetic Chromatography and Capillary Electrophoresis-Mass Spectrometry

 Capillary electrophoresis (CE) has become a powerful tool for enantiomer separations during the last decade. Since 1993, the author has investigated enantiomer separations by affinity capillary electrophoresis (affinity CE) with some proteins and by cyclodextrin electrokinetic chromatography (CDEKC) with some charged cyclodextrins (CDs). Many successful enantiomer separations are demonstrated from our study in this review article. In the enantiomer separations by affinity CE, the deterioration of detection     

Capillary electrophoresis separation of human milk neutral and acidic oligosaccharides derivatized with 2‐aminoacridone

Human milk is a unique fluid in glycobiology due to the presence of many free structurally complex oligosaccharides emerging as important dietary factors during early life and having many biological and protective functions. Methods that allow accurate profiling of oligosaccharide mixtures in this complex biological fluid with quantification of the four known genetically determined groups are welcomed. A high‐voltage CE separation and detection at 254 nm of 17 neutral and acidic human milk oligosaccharide (HMO) standard along with lactose derivatized with 2‐aminoacridone, using a BGE containing 20% methanol as an organic modifier and borate, able to form on‐capillary anionic borate‐polyol complexes, is reported. This CE approach was able to separate both neutral HMOs and acidic HMOs, with the sialic acid residue, also in the presence of lactose in high content. This method was applied to the four secretory groups individually extracted by a rapid and simple preparative step. LODs were found ranging from ～50 to 700 fmol. We were able to measure HMO content also in the presence of excess fluorophore, or interference from proteins, peptides, salts, and other impurities normally present in this complex biological fluid. Overall, CE equipped with a UV detector is a common analytical approach and this simple CE separation offers high resolution and sensitivity for the differentiation of human milk samples related to genetic groups and days of lactation by considering that important changes in HMO content are a reflection of the lactation day.     

Elucidating the Anomalous Binding Enhancement of Isoquinoline Boronic Acid for Sialic Acid Under Acidic Conditions: Expanding Biorecognition Beyond Vicinal Diols

A zwitterionic heterocyclic boronic acid based on 4-isoquinolineboronic acid (IQBA) exhibits the highest reported binding affinity for sialic acid or N-acetylneuraminic acid (Neu5Ac, K=5390±190 m ⁻¹) through the formation of a cyclic boronate ester complex under acidic conditions (pH 3). This anomalous pH-dependent binding enhancement does not occur with common neutral saccharides (e.g., glucose, fructose, sorbitiol), because it is mediated via selective complexation to a α-hydroxycarboxylate moiety forming a stable ion pair and ternary complex with Neu5Ac in phosphate buffer. IQBA expands biorecognition beyond classical vicinal diols under neutral or alkaline buffer conditions, which enables the direct analysis of Neu5Ac by native fluorescence with sub-micromolar detection limits.     

Capillary electrophoresis/electrospray ion trap mass spectrometry for the analysis of negatively charged derivatized and underivatized glycans.

The increasing interest in the development of glycoproteins for therapeutic purposes has created a greater demand for methods to characterize the sugar moieties bound to them. Traditionally, released carbohydrates are derivatized using such methods as permethylation or fluorescent tagging prior to analysis by high performance liquid chromatography (HPLC), capillary electrophoresis (CE), or direct infusion mass spectrometry. However, little research has been performed using CE with on-line mass spectrometry (MS) detection. The CE separation of neutral oligosaccharides requires the covalent attachment of a charged species for electrophoretic migration. Among charged labels which have shown promise in assisting CE and HPLC separation is the fluorophore 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS). This report describes the qualitative profiling of charged ANTS-derivatized and underivatized complex glycans by CE with on-line electrospray ion trap mass spectrometry. Several neutral standard glycans including a maltooligosaccharide ladder were derivatized with ANTS and subjected to CE/UV and CE/MS using low pH buffers consisting of citric and 6-aminocaproic acid salts. The ANTS-derivatized species were detected as negative ions, and multiple stage MS analysis provided valuable structural information. Fragment ions were easily identified, showing promise for the identification of unknowns. N-Linked glycans released from bovine fetuin were used to demonstrate the applicability of ANTS derivatization followed by CE/MS for the analysis of negatively charged glycans. Analyses were performed on both underivatized and ANTS-derivatized species, and sialylated glycans were separated and detected in both forms. The ability of the ion trap mass spectrometer to perform multiple stage analysis was exploited, with MS5 information obtained on selected glycans. This technique presents a complementary method to existing methodologies for the profiling of glycan mixtures.     

Microchip extraction of catecholamines using a boronic acid functional affinity monolith

A novel solid phase extraction microchip with a boronic acid functional affinity monolithic disc was developed in this work. Vinyl phenylboronic acid–ethylene glycol dimethacrylate co-polymer monoliths, which have pore sizes up to 20 μm, were investigated for extraction of catecholamines using adsorption and desorption studies in a batch system. Desorption yields of greater than 90% were achieved for catecholamines at pH 3 and below. Monolithic discs were then formed in chambers in borofloat glass microfluidic chips using in situ UV polymerization. Adsorption on the monolithic discs was performed via electrokinetic flow, with catecholamines determined via laser-induced native fluorescence (LINF) detection following electrokinetic elution. Microchips containing the boronic acid functional polymer discs worked well for extraction of catecholamines, providing greater than 100 fold concentration enrichment. This study demonstrated that a solid phase extraction microchip, containing an easily prepared monolith disc, will be useful for boronate affinity extraction of cis-diol containing compounds.     

Characterization of glycerin-based polyols by capillary electrophoresis

Methods based on capillary electrophoresis (CE) have been developed to obtain the molar mass distribution (MMD) of glycerin-based polyols and details on the presence of mono- and difunctional byproducts in technical samples. Prior to the analyses the hydroxy end-groups of the trifunctional polyols were converted to chargeable and UV-active moieties with phthalic anhydride (PhAH) as the derivatization reagent. With a method of capillary zone electrophoresis (CZE) samples of glycerin-based polyols with average molar masses up to 6000 were separated according to their charge-to-size ratio. The separations were carried out with a buffer solution containing 50% (v/v) acetonitrile and 10 mM sodium tetraborate, and for detection UV absorption at 220 nm was measured. An approximately linear relation between the reciprocal of the effective mobilities and the degree of polymerisation of the glycerin-based polyols was found. Therefore, the proposed CZE system could be used to determine the degree of polymerisation and polydispersity of technical glycerin-based polyol samples. The effect of the presence of sodium dodecyl sulfate (SDS) in the buffer solution on the CE separation of linear polyethylene glycols (PEGs), polypropylene glycols (PPGs) and ethylene oxide-propylene oxide (EO-PO) copolymers with different molar masses was investigated. The interaction between the charged polymer derivatives and SDS ions in solution increased strongly with the degree of polymerisation and the amount PO in the chain of the polymeric compounds. This behaviour made it possible to invert the migration order of EO-PO containing polymers of different size. With a background electrolyte (BGE) composition of 10mM SDS and 25% (v/v) acetonitrile in borate buffer mono- and difunctional byproducts were separated from the main glycerin-based polyols based on their number of end-groups. Accurate quantities for the mono- and difunctional impurities in technical glycerin-based polyol products were determined.     

Photo- and Electrochemical Dual-Responsive Iridium Probe for Saccharide Detection

Dual detection systems are of interest for rapid, accurate data collection in sensing systems and in vitro testing. We introduce an Ir^III complex with a boronic acid receptor site attached to the 2-phenylpyridine ligand as an ideal probe with photo- and electrochemical signals that is sensitive to monosaccharide binding in aqueous solution. The complex displays orange luminescence at 618 nm, which is reduced by 70 and 40 % upon binding of fructose and glucose, respectively. The electro-chemiluminescent signal of the complex also shows a direct response to monosaccharide binding. The Ir^III complex shows the same response upon incorporation into hydrogel matrices as in solution, thus demonstrating the potential of its integration into a device, as a nontoxic, simple-to-use tool to observe sugar binding over physiologically relevant pH ranges and saccharide concentrations. Moreover, the complex's luminescence is responsive to monosaccharide presence in cancer cells.     

Enantioselective recognition of mandelic acid by a 3,6-dithiophen-2-yl-9H-carbazole-based chiral fluorescent bisboronic acid sensor

We have prepared chiral fluorescent bisboronic acid sensors with 3,6-dithiophen-2-yl-9H-carbazole as the fluorophore. The thiophene moiety was used to extend the π-conjugation framework of the fluorophore in order to red-shift the fluorescence emission and, at the same time, to enhance the novel process where the fluorophore serves as the electron donor of the photoinduced electron transfer process (d-PET) of the boronic acid sensors; i.e., the background fluorescence of the sensor 1 at acidic pH is weaker compared to that at neutral or basic pH, in stark contrast to the typical a-PET boronic acid sensors (where the fluorophore serves as the electron acceptor of the photoinduced electron transfer process). The benefit of the d-PET boronic acid sensors is that the recognition of the hydroxylic acids can be achieved at acidic pH. We found that the thiophene moiety is an efficient π-conjugation linker and electron donor; as a result, the d-PET contrast ratio of the sensors upon variation of the pH is improved 10-fold when compared to the previously reported d-PET sensors without the thiophene moiety. Enantioselective recognition of tartaric acid was achieved at acid pH, and the enantioselectivity (total response K(D)I(F)(D)/K(L)I(F)(L)) is 3.3. The fluorescence enhancement (I(F)(Sample)/I(F)(Blank)) of sensor 1 upon binding with tartaric acid is 3.5-fold at pH 3.0. With the fluorescent bisboronic acid sensor 1, enantioselective recognition of mandelic acid was achieved for the first time. To the best of our knowledge, this is the first time that the mandelic acid has been enantioselectively recognized using a chiral fluorescent boronic acid sensor. Chiral monoboronic acid sensor 2 and bisboronic acid sensor 3 without the thiophene moiety failed to enantioselectively recognize mandelic acid. Our findings with the thiophene-incorporated boronic acid sensors will be important for the design of d-PET fluorescent sensors for the enantioselective recognition of α-hydroxylic acids such as mandelic acid, given that it is currently a challenge to recognize these analytes with boronic acid fluorescent molecular sensors.     

Lactose tailored boronic acid conjugated fluorescent gold nanoclusters for turn-on sensing of dopamine

Dopamine being a neurotransmitter and chemical messenger plays a vivacious role in a number of significant medical conditions like Parkinson’s disease, Attention Deficit Hyperactivity Disorder, Schizophrenia, and drug addiction. As turn-on sensors have a superior level of selectivity than fluorescence quenching based sensors, we developed a fluorescence retrieval strategy for dopamine sensing. Here, highly fluorescent amino phenyl boronic acid (APBA)?conjugated gold nanocluster (Au?BSA?APBA probe) has been synthesised from bovine serum albumin?protected gold nanocluster (Au?BSA NCs). Boronic acid forms boronate ester with disaccharides such as lactose due to its affinity to polyols. Hence fluorescence of Au?BSA?APBA probe is quenched when it binds with lactose molecules through boronate ester formation. The fluorescence of Au?BSA?APBA?lactose system can be retrieved (turn-on) with dopamine by the competitive displacement of lactose from the probe surface which suggests the higher affinity of boronic acid to the catechol group of dopamine. Furthermore, real samples spiked with dopamine including human serum and urine were analysed using this turn-on sensor and showed excellent recovery percentage. The developed fluorescent sensor offered high selectivity for dopamine over other catecholamines and aminoacids with detection limit as low as 0.7 μM.     

A simple method for determination of erythritol,maltitol, xylitol,and sorbitol in sugar‐free chocolates by capillary electrophoresis with capacitively coupled contactless conductivity detection

In this work, a novel and simple analytical method using capillary electrophoresis (CE) with capacitively coupled contactless conductivity detection (C⁴D) is proposed for the determination of the polyols erythritol, maltitol, xylitol, and sorbitol in sugar‐free chocolate. CE separation of the polyols was achieved in less than 6 min, and it was mediated by the interaction between the polyols and the borate ions in the background electrolyte, forming negatively charged borate esters. The extraction of the polyols from the samples was simply obtained using ultra‐pure water and ultrasonic energy. Linearity was assessed by calibration curves that showed R² varying from 0.9920 to 0.9976. The LOQs were 12.4, 15.9, 9.0, and 9.0 μg/g for erythritol, maltitol, xylitol, and sorbitol, respectively. The accuracy of the method was evaluated by recovery tests, and the obtained recoveries varied from 70 to 116% with standard deviations ranging from 0.2 to 19%. The CE‐C⁴D method was successfully applied for the determination of the studied polyols in commercial samples of sugar‐free chocolate.     

Analysis of synthetic chemical drugs in adulterated Chinese medicines by capillary electrophoresis/electrospray ionization mass spectrometry

Sixteen synthetic chemical drugs, often found in adulterated Chinese medicines, were studied by capillary electrophoresis/UV absorbance (CE/UV) and capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI-MS). Only nine peaks were detected with CZE/UV, but on-line CZE/MS provided clear identification for most compounds. For a real sample of a Chinese medicinal preparation, a few adulterants were identified by their migration times and protonated molecular ions. For coeluting compounds, more reliable identification was achieved by MS/MS in selected reaction monitoring mode. Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) provided better separation than capillary zone electrophoresis (CZE), and, under optimal conditions, fourteen peaks were detected using UV detection. In ESI, the interference of SDS was less severe in positive ion mode than in negative ion mode. Up to 20 mM SDS could be used in direct coupling of MEKC with ESI-MS if the mass spectrometer was operated in positive ion mode. Because of better resolution in MEKC, adulterants can be identified without the use of MS/MS.     

Controlling deposition and release of polyol-stabilized latex on boronic acid-derivatized cellulose

Poly(glycerol monomethacrylate)-stabilized polystyrene (PGMA-PS) latex particles undergo specific, pH-dependent adsorption onto regenerated cellulose film bearing surface phenylboronic acid groups (cellulose-PBA). Deposition occurs at pH 10 and is driven by the boronate ester formation with the polyol latex surface coating. In contrast, no deposition occurs at pH 4, and previously deposited particles can be readily desorbed at this lower pH. In control experiments, conventional anionic sulfate-stabilized polystyrene latex did not deposit onto the hydrophilic cellulose surface. The distribution of boronate groups in the cellulose was determined by exposure to Alizarin Red S dye, which forms a fluorescent complex with phenylboronic acid; confocal microscopy was used to determine a surface density of 3 nm(2) per boronic acid group on the cellulose surface. Although the boronic acid binding constant with PGMA is relatively low (5.4 L/mol), the cooperative interactions between multiple PBA surface sites and the many PGMA chains per latex particle are sufficient to induce specific latex adsorption, providing a convenient new tool for controlling nanoparticle deposition on surfaces.     

Synthesis, evaluation, and computational studies of naphthalimide-based long-wavelength fluorescent boronic Acid reporters

Boronic acids that change fluorescence properties upon sugar binding are very useful for the synthesis of carbohydrate sensors. Along this line, boronic acids that fluoresce beyond 500 nm are especially useful. A series of boronic acid fluorescent reporter compounds based on the 4-amino-1,8-naphthalimide structure have been synthesized (1a-d) and evaluated under near physiological conditions. These compounds showed good water solubility and significant changes in fluorescence properties after binding with sugars, with the emission wavelength being at around 570 nm. Analogues in this series with different substitutions showed similar properties. We have also examined the mechanism of the observed fluorescence changes for these compounds.     

A unique quinolineboronic acid-based supramolecular structure that relies on double intermolecular B-N bonds for self-assembly in solid state and in solution

The boronic acid functional group plays very important roles in sugar recognition, catalysis, organic synthesis, and supramolecular assembly. Therefore, understanding the unique properties of this functional group is very important. 8-Quinolineboronic acid (8-QBA) is found to be capable of self-assembling in solid state through a unique intermolecular B-N bond mechanism reinforced by intermolecular boronic anhydride formation, π-π stacking, and hydrogen bond formation. NMR NOE and diffusion studies indicate that intermolecular B-N interaction also exists in solution with 8-QBA. In contrast, a positional isomer of 8-QBA, 5-quinolineboronic acid (5-QBA) showed very different behaviors in crystal packing and in solution and therefore different supramolecular network. Understanding the structural features of this unique 8-QBA assembly could be very helpful for the future design of new sugar sensors, molecular catalysts, and supramolecular assemblies.     

Quartz crystal biosensor for detection of sugars and glycated hemoglobin

3-Aminophenylboronic acid (APBA) was used for construction of affinity mass sensors for determination of saccharides and glycated hemoglobin using complexation reaction with diol groups. Two approaches were tested for the bioligand layer fabrication—incorporation of APBA inside a thicker matrix and immobilization as a self-assembled monolayer, respectively. The direct affinity sensor with APBA embeded in the structure of glutaraldehyde-crosslinked bovine serum albumine provided linear response to mono- and dissacharides in the range from 0.1 to 15.0 mg/ml. This biosensor was also used for kinetic analysis of the interaction of boronic acid with diols; the values of association and dissociation constants were determined. The sensors with a monolayer of boronic groups were better suited for binding of glycated hemoglobin, probably due to improved steric access to the ligand.     

Determination of organic acids in air by capillary electrophoresis and ion-exclusion chromatography

Summary A capillary electrophoretic (CE) method for the determination of organic acids in the low ppm range is described. The buffer consisted of 5 mM 2,6-pyridinedicarboxylic acid and 0.5 mM cetyltrimethylammonium bromide, pH 5.6. The former served as background electrolyte for indirect UV detection at 200 nm, whereas the latter was used to reverse electroosmotic flow. In <5 min 8 low molecular mass organic acids (oxalic, formic, malonic, glutaric, glycolic, acetic, lactic and propanoic) and two inorganic acids (hydrochloric and sulphuric) were separated. Detection limits for anions tested were 0.04 mg L⁻¹ (lactic acid) to 0.6 mg L⁻¹ (malonic acid). The method was applied to the determination of organic acids in air samples. The CE results when compared with ion-exclusion chromatography (IEC) agreed well. The use of electrokinetic injection in CE proved beneficial for preconcentration of organic acids in real samples. Using electrokinetic injection, preconcentration factors ranging from 14 (hydrochloric acid) to 3 (propanoic acid) were obtained. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Characterization of quantum dots using capillary zone electrophoresis

Commercially available quantum dots (QDs) were characterized using CE. The CE instruments were laboratory-built, each being capable of both electrokinetic and hydrodynamic injection. Modes of detection include UV absorption and LIF. The CE-LIF system was further modified to handle microliter sample volumes during injection. Sodium phosphate (5-25 mM, pH 7.5-11) was found to be a good buffer electrolyte. Sodium mercaptoproprionate CdTe/CdS (ADS620) QDs and carboxylic acid CdSe/ZnS (T2-Evitag) QDs yielded high separation efficiencies of N = 1.5x10(6) plates at t(M) = 10 min and N = 1.0x10(5) plates at t(M) = 3.8 min, respectively. Apparently the EDC/sulfo-NHS bioconjugation chemistry worked well with the neutral T2-Evitag QDs, but not so well with the negatively charged ADS620 QDs. This preliminary knowledge will serve as a basis for new CE immunoassay studies of QD-biomolecule conjugates and their immunocomplexes with target analytes.