Comparative study on low energy ion beam modification of thermoplastic polymers

ABSTRACT

Polycarbonate (PC) and polyethylene terephthalate (PET) thermoplastic polymer films were irradiated by low energy ion beams such as 100 keV Hydrogen (H⁺) ions and 350 keV Nitrogen (N⁺) ions at varied fluence from 1?×?10¹³ ions/cm² to 5?×?10¹⁴ ions/cm². The depth profile concentration of ions was calculated using Stopping and Range of Ions in Matter (SRIM) software code. Fourier Transform Infrared (FTIR) technique shows decrement in the intensity of peaks and disappearance of peaks mainly related to carbonyl stretching at 1770?cm^?1 and C–C stretching at 1500?cm^?1. Scanning electron microscopy (SEM) of irradiated polymers showed the formation of pores. X-ray diffraction (XRD) analysis has showed decrease in the intensity indicating the decrease in crystallinity after irradiation. Mechanical studies revealed that the molecular weight and microhardness decrease with increase in ion fluence due to increase in chain scission. The contact angle increased with increase in ion fluence indicating the hydrophobic nature of polymer after irradiation. Antibiofilm activity test of irradiated films shows resistance to Salmonella typhi (S. typhi) pathogen responsible for typhoid. The study shows that Nitrogen ion induces more damage compared to Hydrogen ions and PC films get more modified than PET films.     

Study of optical band gap and carbon cluster sizes formed in 100 MeV Si8+ and 145 MeV Ne6+ ions irradiated polypropylene polymer

A wide variety of material modifications in polymers have been studied by using ion irradiation techniques. Extensive research has focused on to Swift Heavy Ions (MeV’s energy), probably because of good controllability and the large penetration length in polymers. High energy ion irradiation tends to damage polymers significantly by electronic excitation and ionization. It may result into the creation of latent tracks and can also cause formation of radicals such as ablation, sputtering, chain scission and intermolecular cross-linking, creation of triple bonds and unsaturated bonds and loss volatile fragments. Polypropylene polymer films of thickness 50 μm were irradiated to the fluences of 1 × 10¹⁰, 3 × 10¹⁰, 1 × 10¹¹, 3 × 10¹¹, 6 × 10¹¹ and 1 × 10¹² ions/cm² with Si⁸⁺ ions of 100 MeV energy from Pelletron accelerator at Inter University Accelerator Centre (IUAC), New Delhi and Ne⁶⁺ ions of 145 MeV to the fluences of 10⁸, 10¹⁰, 10¹¹, 10¹² and 10¹³ ions/cm³ from Variable Energy Cyclotron Centre, Kolkata. Optical modifications were characterized by UV towards the red end of the spectrum with the increase of the fluence. Value of optical band gap E _g shows a decreasing trend with ion fluence irradiated with both kinds of ions. Cluster size N, the number of carbon atoms per conjugation length increases with increasing ion dose. Cluster size also increases with the increase of electronic stopping power.      

Optical and electrical properties of swift heavy ion beam-irradiated polycarbonate/polystyrene bilayer films

Polycarbonate/polystyrene bilayer films prepared by solvent-casting method were irradiated with 55 MeV carbon ion beam at different fluences ranging from 1×10¹¹ to 1×10¹³ ions cm^?2. The structural, optical, surface morphology and dielectric properties of these films were investigated by X-ray diffraction (XRD), UV–visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, optical microscopy and dielectric measurements. The XRD pattern shows that the percentage of crystallinity decreases while inter-chain separations increase with ion fluence. UV–visible spectroscopy shows that the energy band gap decreases and the number of carbon atoms in nanoclusters increase with the increase in ion fluences. The refractive index is also found to decrease with the increase in the ion fluence. Optical microscopy shows that after irradiation polymeric bilayer films color changes with ion fluences. The FTIR spectra evidenced a very small change in cross-linking and chain scissoring at high fluence. Dielectric constant decreases while dielectric loss and AC conductivity increase with ion fluences.     

Induced Electronic and Thermal Effects of 86 MeV Nickel Ions in Bisphenol-A Polycarbonate

Bisphenol-A polycarbonate films were irradiated with 86 MeV swift heavy nickel ions at varying fluences, ranging from 1 × 10¹¹ to 1 × 10¹³ ions cm^?2, under vacuum at room temperature, to analyze the induced electrical and thermal modifications. AC conductivity measurements and UV-visible spectroscopy, Fourier transform infra-red (FTIR) spectroscopy, thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) techniques were applied to analyze the changes. A significant, exponential increase in conductivity at higher frequency was observed with the increase of nickel ion fluence. UV-visible analysis corroborated the results of the AC conductivity measurement, revealing the increase in size of the carbon clusters embedded in the polymer network, with the increase of heavy ion fluence. FTIR analysis revealed the formation of alkene and alkyne end groups at higher doses, which further supported the suggestion that the variation in electrical properties induced by the ion irradiation of the polymer was due to development of a carbonaceous phase inside the polymer due to the irradiation. Thermal analysis, i.e., TGA and DSC patterns, showed that chain-scission was the leading phenomena in the heavy ion-irradiated polycarbonate samples, resulting in degradation of their thermal stability.     

Influence of 120 MeV Si9+ ion irradiation on ZnTe semiconductor thin films

ABSTRACT

ZnTe (Zinc Telluride) is a potential semiconducting material for many optoelectronic devices like solar cells and back contact material for CdTe-based solar cells. In the present study, ZnTe thin films were prepared by thermal evaporation technique and then irradiated with 120?MeV Si⁹⁺ ions at different fluences. These films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–Visible spectroscopy techniques. XRD study confirms increased crystallinity and grain growth for post-irradiated ZnTe thin films for fluences, up to 1?×?10¹¹ ions cm^?2. However, the grain size and crystallinity decreased for higher fluence-exposed samples. SEM images confirm the observed structural properties. Modification of the surface morphology of the film due to the ion irradiation with different fluences is studied. Optical band gap of film is decreased from 2.31?eV (pristine) to 2.17?eV after irradiation of Si⁹⁺ ions.     

Swift heavy ion provoked structural, optical and electrical properties in SnO2 thin films

SnO₂ thin films grown on glass substrates at 300 ^°C by reactive thermal evaporation and annealed at 600 ^°C were irradiated by 120 MeV Ag⁹⁺ ions. Though irradiation is known to induce lattice disorder and suppression of crystallinity, we observe grain growth at a certain fluence of irradiation. X-ray diffraction (XRD) revealed the crystalline nature of the films. The particle size estimated by Scherrer’s formula for the irradiated films was in the range 10–25 nm. The crystallite size increases with increase in fluence up to 1×10¹² ions?cm^?2, whereas after that the size starts decreasing. Atomic force microscope (AFM) results showed the surface modification of nanostructures for films irradiated with fluences of 1×10¹¹ ions?cm^?2 to 1×10¹³ ions?cm^?2. The UV–visible spectrum showed the band gap of the irradiated films in the range of 3.56 eV–3.95 eV. The resistivity decreases with fluence up to 5×10¹² ions?cm^?2 and starts increasing after that. Rutherford Backscattering (RBS) reveals the composition of the films and sputtering of ions due to irradiation at higher fluence.     

Effect of swift heavy ion irradiation on dilute Fe-doped Sb0.95Se0.05 magnetic semiconductor

A thin film of dilute Fe (0.008)-doped Sb_0.95Se_0.05 alloy was grown on silicon substrate using the thermal evaporation technique. This film was irradiated with swift heavy ions (SHIs) Ag⁺¹⁵ having 200?MeV energy at ion fluences of 1?×?10¹² and 5?×?10¹² ions per cm², respectively. The thickness of the thin film was ～500?nm. We study the effect of irradiation on structural, electrical, surface morphology and magnetic properties of this film using grazing angle XRD (GAXRD), DC resistivity, atomic force microscopy (AFM) and magnetic force microscopy (MFM), respectively. GAXRD suggests that no significant change is observed in this system due to SHI irradiation. The average crystallite size increases with fluence, whereas the AFM image shows the rms roughness decreases due to irradiation with respect to the un-irradiated thin film. The MFM image shows that the magnetic interaction in irradiated film decreases due to the irradiation effect. Although the un-irradiated sample shows metal to semiconducting transition, but after irradiation with fluence of 5?×?10¹² ions per cm², the sharpness of the metal to semiconducting phase transition is observed to increase dramatically at ～300?K. This characteristic of the thin film makes it a promising candidate for an electrical switching device after irradiation.     

AC electrical properties of proton irradiated EVA films

MeV ions passing through polymeric films modify their electrical, optical and thermal properties and these changes are related to changes in the chemical structure of the polymers. Ethylene vinyl acetate (EVA) films were irradiated with 3 MeV proton beam at different fluences of 10¹³, 10¹⁴ and 10¹⁵ ions/cm². AC electrical properties of pristine and irradiated samples were studied in the frequency range 100 Hz to 100 kHz by means of an LCR meter. There is an exponential increase in conductivity with log frequency and conductivity increases as fluence increases. The dielectric loss/constant is observed to change with the fluence. FTIR spectra reveals significant change in intensities of functional groups at a fluence of 10¹⁵ ions/cm² due to scissioning of polymer chains.     

Copper (50 MeV) and Oxygen (84 MeV) Ion Irradiation Probed Thermal,Structural and Optical Behavior of Polyethylene Terephthalate

Polyethylene terephthalate (PET) films of 50?μm thickness were exposed to swift-heavy 50?MeV copper and 84?MeV oxygen ions, with fluence varying from 1?×?10¹¹ to 1?×?10¹³ ions cm^?2. Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) and UV-visible spectroscopic techniques were used to characterize the irradiated samples. The XRD and DSC analysis indicated the loss of crystallinity during/after the irradiation. The FTIR spectra revealed the formation of alkyne end groups, C═C groups and structural deformation with increase of ion fluence. Considerable reduction in the value of the optical bandgap was inferred from the study of the UV-visible absorption curves.     

Effect of 100 MeV O7+ ion beam irradiation on structural,optical and electronic properties of SnO2 thin films

In this paper, we present the impact of swift heavy ion beam irradiation on the structural, optical and electronic properties of SnO₂ thin films. Thin films were deposited using the pulsed laser deposition technique on Al₂O₃ substrates. Atomic force microscopy, X-ray diffraction, UV–visible absorption and temperature-dependent resistivity measurements were performed to explore the morphological, structural, optical and electronic properties of the as-deposited and irradiated samples. The peak intensity of the (200) peak was found to decrease monotonously with increasing irradiation fluence. The band gap energy of the 1×10¹¹ ion/cm² irradiated sample was found to increase. The electrical resistivity of the samples showed a continuous increase with the irradiation fluence.     

50 MeV Li3+ ion irradiation effect on structural, electrical, and dielectric properties of PVA-based nanocomposite polymer electrolytes

Nanocomposite polymer electrolyte thin films of polyvinyl alcohol (PVA)-orthophosphoric acid (H₃PO₄)-Al₂O₃ have been prepared by solution cast technique. Films are irradiated with 50 MeV Li³⁺ ions having four different fluences viz. 5?×?10¹⁰, 1?×?10¹¹, 5?×?10¹¹, and 1?×?10¹² ions/cm². The effect of irradiation on polymeric samples has been studied and characterized. X-ray diffraction spectra reveal that percent degree of crystallinity of samples decrease with ion fluences. Glass transition and melting temperatures have been also decreased as observed in differential scanning calorimetry. A possible complexation/interaction has been shown by Fourier transform infrared spectroscopy. Temperature-dependent ionic conductivity shows an Arrhenius behavior before and after glass transition temperature. It is observed that ionic conductivity increases with ion fluences and after a critical fluence, it starts to decrease. Maximum ionic conductivity of ～2.3?×?10^?5 S/cm owing to minimum activation energy of ～0.012 eV has been observed for irradiated electrolyte sample at fluence of 5?×?10¹¹ ions/cm². The dielectric constant and dielectric loss also increase with ion fluences while they decrease with frequency. Transference number of ions shows that the samples are of purely ionic in nature before and after ion irradiation.     

Effect of gamma-irradiation on the structural,optical and electrical properties of PEO/starch blend containing different concentrations of gold nanoparticles

ABSTRACT

Blend of polyethylene oxide (PEO)/starch (70/30 wt.%) filled with different amounts of gold nanoparticles (AuNPs) were prepared using the casting technique. X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) techniques were used to investigate the structure of polymeric samples before and after exposing to gamma irradiation at different times. XRD showed a gradual decrease in intensity of crystalline peaks with increasing the gamma dose denotes a decrease in the amount of crystalline phase in the films, while the FTIR measurement shows induced changes in chemical structure assigned to the AuNPs amount and irradiation times. The optical energy gap values (E_g) for unirradiated and irradiated samples were calculated and interpreted. The differential scanning calorimetry (DSC) which showed the miscibility between the two components of the blend. The electrical conductivity (σ) measurement was showed increased in electrical conductivity after exposure to the gamma dose. The gold nanoparticles were used as nano?ller to improve the structural and electrical properties of polymeric samples. The results showed the Gamma irradiation significantly effect on the structural and electrical properties of PEO/starch blend.     

Enhancement in electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes by 100 MeV Si9+ swift heavy ion irradiation

Swift heavy ion (SHI) irradiation has been used as a tool to enhance the electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes dispersed with dedoped polyaniline (PAni) nanorods; 100 MeV Si⁹⁺ ions with four different fluences of 5?×?10¹⁰, 1?×?10¹¹, 5?×?10¹¹, and 1?×?10¹² ions cm^?2 have been used as SHI. XRD results depict that with increasing ion fluence, crystallinity decreases due to chain scission up to fluence of 5?×?10¹¹ ions cm^?2, and at higher fluence, crystallinity increases due to cross-linking of polymer chains. Ionic conductivity, electrochemical stability, and dielectric properties are enhanced with increasing ion fluence attaining maximum value at the fluence of 5?×?10¹¹ ions cm^?2 and subsequently decrease. Optimum ionic conductivity of 1.5?×?10^?2 S cm^?1 and electrochemical stability up to 6.3 V have been obtained at the fluence of 5?×?10¹¹ ions cm^?2. Ac conductivity studies show that ion conduction takes place through hopping of ions from one coordination site to the other. On SHI irradiation, amorphicity of the polymer matrix increases resulting in increased segmental motion which facilitates ion hopping leading to an increase in ionic conductivity. Thermogravimetric analysis (TGA) measurements show that SHI-irradiated nanocomposite polymer electrolytes are thermally stable up to 240–260 °C.     

Li3+ ion irradiation effects on ionic conduction in P(VDF–HFP)–(PC + DEC)–LiClO4 gel polymer electrolyte system

Swift heavy ion irradiation of P(VDF–HFP)–(PC + DEC)–LiClO₄ gel polymer electrolyte system with 48 MeV Li³⁺ ions having five different fluences was investigated with a view to increase the Li⁺ ion diffusivity in the electrolyte. Irradiation with swift heavy ion (SHI) shows enhancement of conductivity at lower fluences and decrease in conductivity at higher fluences with respect to unirradiated polymer electrolyte films. Maximum room temperature (303 K) ionic conductivity is found to be 2.2 × 10^− 2 S/cm after irradiation with fluence of 10¹¹ ions/cm². This interesting result could be ascribed to the fluence-dependent change in porosity and to the fact that for a particular ion beam with a given energy higher fluence provides critical activation energy for cross-linking and crystallization to occur, which results in the decrease in ionic conductivity. The XRD results show decrease in the degree of crystallinity upon ion irradiation at low fluences (≤ 10¹¹ ions/cm²) and increase in crystallinity at high fluences (> 10¹¹ ions/cm²). The scanning electron micrographs (SEM) exhibit increased porosity of the polymer electrolyte films after low fluence ion irradiation.     

Carbon (70 MeV) and copper (120 MeV) ions irradiation effects in Makrofol-N

Makrofol-N polycarbonate was irradiated with carbon (70 MeV) and copper (120 MeV) ions to analyze the induced effects with respect to optical and structural properties. In the present investigation, the fluence for carbon and copper beams was kept in the range of 1×10¹¹– 1×10¹³ ions/cm² to study the swift heavy ion induced modifications. UV–VIS, FTIR and XRD techniques were utilized to study the induced changes. The analysis of UV–VIS absorption studies revealed that the optical energy gap was reduced by 17% on carbon irradiation, whereas the copper beam leads to a decrease of 52% at the highest fluence of 1×10¹³ ions/cm². The band gap can be correlated to the number of carbon atoms, N, in a cluster with a modified Robertson's equation. In copper (120 MeV) ions irradiated polycarbonate, the number of carbon atoms in a cluster was increased from 63 to 269 with the increase of ion fluence from 0 to 1×10¹³ ions/cm², whereas N is raised only up to 91 when the same polymer films were irradiated with carbon (70 MeV) ions under similar conditions. FTIR analysis showed a decrease in almost all characteristic absorption bands under irradiation. The formation of hydroxyl (? OH) and alkene (C?C) groups were observed in Makrofol-N at higher fluence on irradiation with both types of ions, while the formation alkyne end (R? C≡ CH) group was observed only after copper ions irradiation. The radii of the alkyne production of about 3.3 nm were deduced for copper (120 MeV) ions. XRD measurements show a decrease in intensity of the main peak and an increase of the average intermolecular spacing with the increase of ion fluence, which may be attributed to the structural degradation of Makrofol-N on swift ion irradiation.     

Studies of some physical properties of PrFe0.7Ni0.3O3 thin films after 200 MeV Ag15+ irradiation

PrFe_0.7Ni_0.3O₃ thin films (thickness ~ 200 nm) were prepared by pulsed laser ablation technique on LaAlO₃ substrate. These films were irradiated with 200?MeV Ag¹⁵⁺ ions at various fluencies, ranging from 1 × 10¹¹ to 1 × 10¹² ions/cm². These irradiated thin films were characterized by using X-ray diffraction, dc conductivity, dc magnetization and atomic force microscopy. These films exhibit orthorhombic structure and retain it even after irradiations. The crystallite size (110–137?nm), micro strain (1.48 × 10^?2–1.75 × 10^?2 line^?2?m^?4) and dislocation density (79.7 × 10¹⁴–53.2 × 10¹⁴ line/m²) vary with ion fluencies. An enhancement in resistivity at certain fluence and then a decrease in its value (0.22175–0.21813?Ω?cm) are seen. A drastic change in observed magnetism after ion irradiation is seen. With ion irradiation, an increase in surface roughness, due to the formation of hillocks and other factors, is observed. Destruction of magnetic domains after irradiation can also be visualized with magnetic force microscopy and is in close agreement with magnetization data. The impact on various physical properties in these thin films after irradiation indicates a distortion in the lattice structure and consequently on single-particle band width caused by stress-induced defects.     

溶胶-凝胶法制备Li-N双掺p型ZnO薄膜的结构、光学和电学性能

采用溶胶-凝胶法在n型Si(100)衬底上沉积Li-N双掺杂ZnO薄膜,经X射线衍射和扫描电镜图片分析,所制备薄膜具有多晶纤锌矿结构和高的c轴择优取向.室温下霍尔效应测试结果显示Li-N双掺杂ZnO薄膜具有p型导电特性.在Li掺杂量为15.0at%,Li/N（摩尔比）为1∶1,700℃退火等优化条件下得到的最佳电学性能结果是：电阻率为0.34 Ω·cm,霍尔迁移率为16.43 cm²/V·s,载流子浓度为2.79×10¹⁹ cm^{-3关键词： Li-N双掺 p型ZnO薄膜 溶胶-凝胶 性能}     

Study of optical band gap, carbonaceous clusters and structuring in CR-39 and PET polymers irradiated by 100 MeV O ions

Commercially purchased CR-39 and PET polymers were irradiated by 100 MeV O⁷⁺ ions of varying fluences, ranging from 1×10¹¹ to 1×10¹³ ions/cm². The effects of swift heavy ions (SHI) on the structural, optical and chemical properties of CR-39 and PET polymers were studied using X-ray diffraction (XRD), UV-visible spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The XRD patterns of CR-39 show that the intensity of the peak decreases with increasing ion fluence, which indicates that the semicrystalline structure of polymer changes to amorphous with increasing fluences. The XRD patterns of PET show a slight increase in the intensity of the peaks, indicating an increase in the crystallinity. The UV-visible spectra show the shift in the absorbance edge towards the higher wavelength, indicating the change in band gap. Band gap in PET and CR-39 found to be decrease from 3.87 to 2.91 and 5.3-3.5 eV, respectively. The cluster size also shows a variation in the carbon atoms per cluster that varies from 42 to 96 in CR-39 and from 78 to 139 in PET. The FTIR spectra show an overall reduction in intensity of the typical bands, indicating the degradation of polymers after irradiation.     

Synthesis of α-In 2 Te 3 thin films from In/Te bilayer by Si ion irradiation

In this work, In/Te bilayer thin films were prepared using sequential thermal evaporation method and subsequently irradiated using swift heavy ions (SHIs) of 100 MeV silicon (Si) with different fluences (1×10¹³ to 5×10¹³/cm²). The inter-diffusion of In and Te layers was highly controlled by SHI irradiation and the In₂Te₃ formation capability was compared with that of the conventional annealing method. The structural as well as optical properties of a post-sintered SHI-irradiated In/Te bilayer were investigated using X-ray diffraction (XRD) measurements and UV–visible spectroscopy, respectively. We found that irradiated samples showed single-phase In₂Te₃ under post-annealed conditions at 150 °C unlike that prepared using the conventional thermal annealing method, which showed mixed phases under similar conditions. This confirms the effective inter-diffusion in bilayer films by SHI irradiation toward the formation of single-phase In₂Te₃. The estimated optical band gap energy was found to be 1.1±0.5 eV and strongly corroborated the XRD results. In addition, the estimated refractive index (n) value of the SHI-irradiated sample (～3.3) was higher than that of the sample obtained through the conventional annealing method (～2.8). This proves that SHI offers a highly compact nature even at low temperatures. This work has a wide scope for achieving single-phase alloyed films through bilayer mixing by SHI irradiation.     

Swift heavy ion induced modifications in cobalt doped ZnO thin films: Structural and optical studies

Modifications in the structural and optical properties of 100 MeV Ni⁷⁺ ions irradiated cobalt doped ZnO thin films (Zn_1−xCo_xO, x = 0.05) prepared by sol-gel route were studied. The films irradiated with a fluence of 1 × 10¹³ ions/cm² were single phase and show improved crystalline structure with preferred C-axis orientation as revealed from XRD analysis. Effects of irradiation on bond structure of thin films were studied by FTIR spectroscopy. The spectrum shows no change in bonding structure of Zn-O after irradiation. Improved quality of films is further supported by FTIR studies. Optical properties of the pristine and irradiated samples have been determined by using UV-vis spectroscopic technique. Optical absorption spectra show an appreciable red shift in the band gap of irradiated Zn_1−xCo_xO thin film due to sp-d interaction between Co²⁺ ions and ZnO band electrons. Transmission spectra show absorption band edges at 1.8 eV, 2.05 eV and 2.18 eV corresponding to d-d transition of Co²⁺ ions in tetrahedral field of ZnO. The AFM study shows a slight increase in grain size and surface roughness of the thin films after irradiation.