A sensitive and simple extractive-spectrophotometric method for the determination of microgram amount of cobalt by using alpha-benzilmonoxime.

Alpha-benzilmonoxime has been used for the extraction and determination of cobalt at microgram amount. The reagent reacts with cobalt(II) in the pH range of 8.8 - 9.3 to form a yellow-color chelate, which is extracted in chloroform, toluene, and some other non-polar solvents. The chelate is stable in chloroform for about one day. Under the optimum conditions of the a-benzilmonoxime concentration and pH of 9.0, Beer's law was obeyed in the concentration range of 0.08 - 2.2 microg/ml cobalt. The molar absorptivity of the extracted species was 2.55 x 10(4) dm3/mol cm at 380 nm, with a detection limit of 0.01 microg/ml cobalt. Relative standard deviations of 0.4, 0.8 and 2.3% were found for the determination of cobalt concentrations of 2.2, 1.1 and 0.08 microg/ml, respectively. The effect of diverse ions on the determination of 1.00 microg/ml of cobalt has been studied. The method was applied to the determination of cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratory chemical mixture and some synthetic alloy samples. The method is sensitive, simple, rapid and accurate.     

Selective determination of cobalt using polyurethane foam and 2-(2-benzothiazolylazo)-2-p-cresol as a spectrophotometric reagent

The present work describes a selective, rapid and economical method for the determination of cobalt using the 2-(2-benzothiazolylazo)-p-cresol (BTAC) as a spectrophotometric reagent associated with a solid extraction on polyurethane foam. The BTAC reacts with Co(II) in the presence of Triton-X100 surfactant forming a green complex with maximum absorption at 615 nm. The reaction is used for cobalt determination within a pH range of 6.50-7.50, with an apparent molar absorptivity of 1.62 x 10(4) L mol(-1) cm(-1). Beer's Law is obeyed for a concentration of at least 1.60 microg ml(-1). A selective procedure is proposed for cobalt determination in the presence of Fe(II), Hg(II), Zn(II) and Cu(II) up to milligram levels using masking agents. Polyurethane foam is used for the preconcentration and separation of cobalt from thiocyanate media and this procedure is applied to its determination in nickel salts and steel alloys.     

Extractive spectrophotometric determination of cobalt using Cyanex-272

Cyanex-272 forms a blue-colored complex with Co(II) in the organic phase. The complex shows three absorption maxima. The peak at 635 nm has been used for developing a spectrophotometric procedure for cobalt determination. Beer's law was found to be obeyed in the range 0.295-2.36 mg of cobalt. The nature of the extracted species was found to be CoR(2).HR. The molar absorptivity was found to be 3.07 x 10(2) l. mol(-1). cm(-1) at 635 nm. The method was applied for cobalt determination in solutions obtained from Beta Cake and a super alloy and was found to give values close to the actual ones. Easy regeneration of the reagent (Cyanex-272) for re-use is the main advantage of the present method.     

A rapid and sensitive extractive spectrophotometric determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone.

A rapid and sensitive extractive spectrophotometric method has been developed for the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone (PPT) as an analytical reagent. The reagent forms a red-color complex with the metal at pH 3.0, which is extracted into benzene. The absorbance is measured at 460 nm. The method adheres to Beer's law up to a concentration range of 0.4-6.4 microg cm(-3). The molar absorptivity and Sandell's sensitivity are 2.20 x 10(4) dm3 mol(-1) cm(-1) and 4.85 x 10(-3) microg cm(-2), respectively. The correlation coefficient of the Pd(II)-PPT complex is 0.99, which indicates an excellent linearity between two variables. The detection limit of this method is 0.05 microg cm(-3). The instability constant of the Pd(II)-PPT complex calculated from Edmond and Birnbaum's method is 2.90 x 10(-5) and that of Asmus' method is 2.80 x 10(-5) at room temperature. The concurrent repetition of the method is checked and the relative standard deviation (RSD) (n = 5) was derived as 1.84 percent. The present method was applied to the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts. The results were compared by employing an atomic-absorption spectrometer.     

Solid-phase extraction and atomic absorption spectrometric determination of cobalt using an octadecyl bonded silica membrane disk modified with Cyanex 272

A simple SPE method for determination of cobalt(II) using a C18 bonded silica membrane disk impregnated with Cyanex 272 has been developed. Cobalt(II) was quantitatively sorbed at pH 6.0 from a sample solution and eluted using 10.0 mL 1.0 M HNO3 prior to its flame atomic absorption spectrometric determination. The influence of eluting agents, the minimum volume and maximum flow rate of the eluent, and interfering ions on cobalt(II) was studied. The method developed for cobalt(II) had an LOD of 1.4 microg/L, and a preconcentration factor > 200 with an RSD of 0.6%. The reusability of the modified disk was for 40 cycles. The method was applied for the determination of cobalt in certified samples, urine, and industrial sludge samples.     

4-(N,N-diethylamino) benzaldehyde thiosemicarbazone in the spectrophotometric determination of palladium

4-(N,N-diethylamino)benzaldehyde thiosemicarbazone(DEABT) is proposed as a sensitive and selective analytical reagent for the spectrophotometric determination of palladium(II). The reagent reacts with palladium (II) in a potassium hydrogen phthalate-hydrochloric acid buffer of pH 3.0, to form a yellow complex. Beer's law is obeyed in the concentration range up to 3.60 microgmL(-1). The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 0.36 - 3.24 microg mL(-1). The yellow Pd(II)-DEABT complex shows a maximum absorbance at 408 nm, with molar absorptivity of 3.33 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity of the complex from Beer's data, for D = 0.001, is 0.0032 microg cm(-2). The composition of the Pd(II)-DEABT complex is found to be 1:2 (M:L). The interference of various cations and anions in the method were studied. The proposed method was successfully used for the determination of Pd(II) in alloys, catalysts, complexes and model mixtures with a fair degree of accuracy.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

A simple spectrophotometric method for the determination of copper in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole.

A simple spectrophotometric method is presented for the rapid determination of copper at a trace level using 2,5-dimercapto-1,3,4-thiadiazole (DMTD) as a new spectrophotometric reagent. The method is based on the reaction of non-absorbent DMTD in a slightly acidic (0.002-0.014 mol dm(-3) sulfuric acid) aqueous solution with copper(II) to produce a highly absorbent greenish-yellow chelate product that has an absorption maximum at 390 nm. The reaction is instantaneous and the absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 5.65 x 10(4) dm3 mol(-1) cm(-1) and 10 ng cm(-2) of CuII, respectively. Linear calibration graphs were obtained for 0.1-20 microg cm(-3) of CuII; the stoichiometric composition of the chelate is 1:2 (Cu:DMTD). A large excess of over 50 cations, anions and complexing agents (e.g. tartrate, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere in the determination. The method was successfully used for the determination of copper in several Standard Reference Materials as well as in some environmental water samples, biological samples, soil samples and solutions containing both copper(I) and copper(II) and complex synthetic mixtures. The method has high precision and accuracy (s = +/-0.01 for 0.5 microg cm(-1)).     

Kinetic determination of trace cobalt(II) by visual autocatalytic indication

A highly sensitive and simple visual autocatalytic method has been developed for the determination of trace cobalt. The cobalt ion released by the oxidative decomposition of inert bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino-phenolato] cobaltate (Co(III)-5-Br-PAPS) with peroxomonosulfate acts as a catalyst for the oxidative degradation of the complex. Thus a definite time lapse of degradation is observed by the sudden disappearance of colored Co(III) complexes. The degradation time varies inversely with the logarithm of the initial concentration of cobalt(II). The determination range of cobalt(II) was from 3x10(-9) to 2x10(-7) M in the presence of 5x10(-6) M of 5-Br-PAPS. The relative standard deviation of the spot size method (10 mul) was 3.5% at 1x10(-7) M cobalt(II). This autocatalytic indicator reaction system has been successfully applied for the visual determination of urinary cobalt.     

Development of an reliable analytical method for synergistic extractive spectrophotometric determination of cobalt(II) from alloys and nano composite samples by using chromogenic chelating ligand

A synergistic simple and selective spectrophotometric method was developed for the determination of cobalt(II) with 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2',4'-dinitro APTPT] as a chromogenic reagent. The proposed method has been described on the basis of synergistic effective extraction of cobalt(II) in presence of pyridine at pH range 9.5-10.2, showed orange-red coloured ternary complex having molar ratio 1:2:2 (M:L:Py). The equilibrium time is 10 min for extraction of cobalt(III) from organic phase. The absorbance of coloured organic layer in chloroform is measured spectrophotometrically at 490 nm against reagent blank. The Beer's law was obeyed in the concentration range 2.5-15 μg mL(-1) of cobalt(II) and optimum concentration range was 5-12.5 μg mL(-1) of cobalt(II) and it was evaluated from Ringbom's plot. The molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT-pyridine complex in chloroform are 1.109×10(3) L mol(-1) cm(-1) and 0.053 μg cm(-2), respectively while molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT complex in chloroform are 6.22×10(2) L mol(-1) cm(-1) and 0.096 μg cm(-2), respectively. The composition of cobalt(II)-2',4'-dinitro APTPT-pyridine complex (1:2:2) was established by slope ratio method, mole ratio method and Job's method of continuous variation. The ternary complex was stable for more than 48 h. The interfering effects of various cations and anions were also studied, and use of suitable masking agents enhances the selectivity of the method. The method is successfully applied for the determination of cobalt(II) in binary, synthetic mixtures and real samples. A repetition of the method was checked by finding relative standard deviation (R.S.D.) for n=5 which was 0.15%. The reliability of the method is confirmed by comparison of experimental results with atomic absorption spectrophotometer.     

Study of 2-(2-quinolinylazo)-5-dimethylaminobenzoic acid as a new chromogenic reagent for the spectrophotometric determination of cobalt

2-(2-Quinolinylazo)-5-dimethylaminobenzoic acid (QADMAB) is proposed as a new sensitive and selective chromogenic reagent for spectrophotometric determination of cobalt. The QADMAB reacts with cobalt in the presence of cetyl trimethylammonium bromide (CTMAB) medium to form a violet complex of molar ratio 1:2 (cobalt to QADMAB) in the pH range 3.2-5.2. The molar absorptivity of the complex is 1.28x10(5) L mol(-1) cm(-1) at 625 nm. Beer's law is obeyed in range 0.01-0.32 micro g mL(-1). The relative standard deviation for eleven replicate samples of 0.2 micro g mL(-1) is 0.76%. This method was applied to the determination of cobalt in biological samples, Vitamin B(12), alloys and water with good results.     

A facile spectrophotometric method for cobalt determination using alpha-benzilmonoxime in sodium dodecylsulfate micellar solutions.

Alpha-benzilmonoxime in sodium dodecylsulfate micellar media has been used for the spectrophotometric determination of cobalt at pH 9.0. The linear range of calibration is 0.05-1.50 microg cm(-3) of cobalt at 380 nm with molar absorptivity of 3.72 x 10(4) dm3 mol(-1) cm(-1), which is about 1.5-times greater than that of the alpha-benzilmonoxime extraction based method. The relative standard deviations, recoveries, detection limit and effects of diverse ions on the determination of cobalt were studied. These analytical results were satisfactory. The method was successfully applied to the determination of cobalt in the various samples.     

A new selective chromogenic reagent for the spectrophotometric determination of thallium(I) and (III) and its separation using flotation and the solid-phase extraction on polyurethane foam.

A new sensitive chromogenic reagent, 9,10-phenanthaquinone monoethylthiosemicarbazone (PET), has been synthesized and used in the spectrophotometric determination of Tl(III). In HNO3, H2SO4 or H3PO4 acids, PET can react immediately at room temperature with Tl(III) to form a red 2:1 complex with a maximum absorption at 516 nm. The different analytical parameters affecting the extraction and determination processes have been examined. The calibration curve was found to be linear over the range 0.2-10 microg cm(-3) with a molar absorptivity of 2.2 x 10(4) dm3 mol(-1) cm(-1). Sandell's sensitivity was found to be 0.0093 microg cm(-2). No interference from macroamounts of foreign ions was detected, except for Pd(II). However, Pd(II) does not affect the determination process, because its complex with PET has its lambda(max) at 625 nm. The proposed method has been applied to the determination of Tl(I and III) in synthetic and natural samples after separation by flotation (in oleic acid/kerosene) and solid-phase extraction (on polyurethane foam) techniques. The two methods were found to be accurate and not subject to random error, but solid-phase extraction was preferred because it is cheap, simpler and there is no contamination risk coming from flotation reagents.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Rapid spectrophotometric method (aqueous and extractive) for the determination of titanium in silicate rocks

A sensitive and highly selective aqueous as well as extractive spectrophotometric method has been developed for the determination of titanium(IV) using 2,3-dihydroxynaphthalene (H(2)ND) as a chromogenic agent. The reagent (H(2)ND) forms a 1:3 (TiOH(3+):ligand) complex at pH 4-9. The molar absorptivity and Sandell's sensitivity are 3.2 x 10(4) l . mol(-1)mol . cm(-1) and 0.001 microg/cm(2), respectively at lambda(max) 375 nm. The method has been found highly selective for Ti(IV) determination in rock samples. Solvent extraction of Ti(IV) in ethylacetate greatly improves the detection limit of the method. The method has been successfully applied to diverse silicate rock samples and results obtained are favourably comparable with those obtained from the tiron method. The reagent (H(2)ND) used in the present investigation is a much better variant than tiron for titanium(IV) determination in silicate rock samples in terms of sensitivity, selectivity, operational simplicity and economy.     

Synthesis of N-o-methylphenyl-N'-(sodium p-aminobenzene-sulfonate) thiourea and its chromogenic reaction with palladium(II).

A new chromogenic reagent, N-o-methylphenyl-N'-(sodium p-aminobenzenesulfonate)thiourea (MSAT), has been synthesized and characterized by elemental analysis, (1)H-NMR, FT-IR and UV-Vis spectra. Based on the absorption spectrum of the colored complex of MSAT with palladium(II), a novel spectrophotometric method for the determination of palladium has been developed. In a pH 4.0 - 5.5 HAc-NaAc buffer solution, palladium(II) reacted with MSAT to form a stable yellow water-soluble complex with an apparent molar absorptivity of epsilon = 2.04 x 10(5) L mol(-1) cm(-1) at the maximum absorption of 318.0 nm. Beer's law was obeyed in the concentration range of 1.2 - 11.8 microg per 25 mL for palladium(II) with a correlation coefficient of 0.9997. The probable interfering ions and their tolerable limits have also been investigated in detail. The proposed method is simple, rapid, and sensitive, and has been applied to the determination of palladium in anode mud and ore samples with satisfactory results.     

High-performance liquid chromatography with sequential injection for online precolumn derivatization of some heavy metals

HPLC was coupled with sequential injection (SI) for simultaneous analyses of some heavy metals, including Co(II), Ni(II), Cu(II), and Fe(II). 2-(5-Nitro-2-pyridylazo)-5-[N-propyl-N-(3-sulfopropyl)amino]phenol (nitro-PAPS) was employed as a derivatizing reagent for sensitive spectrophotometric detection by online precolumn derivatization. The SI system offers an automated handling of sample and reagent, online precolumn derivatization, and propulsion of derivatives to the HPLC injection loop. The metal-nitro-PAPS complexes were separated on a C(18)-muBondapak column (3.9x300 mm(2)). Using the proposed SI-HPLC system, determination of four metal ions by means of nitro-PAPS complexes was achieved within 13 min in which the parallel of derivatization and separation were processed at the same time. Linear calibration graphs were obtained in the ranges of 0.005-0.250 mg/L for Cu(II), 0.007-1.000 mg/L for Co(II), 0.005-0.075 mg/L for Ni(II), and 0.005-0.100 mg/L for Fe(II). The system provides means for automation with good precision and minimizing error in solution handling with the RSD of less than 6%. The detection limits obtained were 2 microg/L for Cu(II) and Co(II), and 1 microg/L for Ni(II) and Fe(II). The method was successfully applied for the determination of metal ions in various samples, including milk powder for infant, mineral supplements, local wines, and drinking water.     

Solid-phase extraction and spectrophotometric determination of mercury with 6-mercaptopurine in environmental samples

A highly selective, sensitive and rapid method for the determination of trace amounts of inorganic mercury based on the reaction of Hg (II) with 6-mercaptopurine and the solid phase extraction of the complex on C18 membrane disks was developed. The 6-mercaptopurine selectively reacts with Hg (II) to form a complex in the pH range of 5-8. This complex was preconcentrated by solid phase extraction with C18 disks. An enrichment factor of 100 was achieved. The molar absorptivity of the complex is 0.26 x 10(-6) L. mol(-1) cm(-1) measured at 315 nm. The Beer's law is obeyed in the concentration range of 0.002-0.048 microg mL(-1). The relative standard deviation for eleven-replicated measurement of 0.04 microg mL(-1) is 1.5 %. The detection limit is 0.001 microg mL(-1) in the water samples. The advantage of the method is that the determination of Hg (II) is free from interference of almost all the cations and anions found in environment and wastewater samples. The determination of Hg (II) in water samples of different origins and marine sediment were carried out by the present method and cold vapor atomic absorption spectrometry (CVAAS). Also the method's accuracy was investigated by using SRM 2709. The obtained results by the present procedure were in good agreement with those of the CVAAS and certified value, so that the applicability of the proposed method was confirmed for the real samples.     

Determination of uranium, iron, copper, and nickel from ore samples by MEKC using N,N'-ethylene bis(salicylaldimine) as complexing reagent

An analytical procedure has been developed for the separation of dioxouranium(VI), iron(III), copper(II), nickel(II), cobalt(II), cobalt(III), palladium(II), and thorium(IV) by MEKC using N,N'-ethylene bis(salicylaldimine) (H(2)SA(2)en) as a complexing reagent with total runtime <4.5 min. SDS was used as micellar medium at pH 8 with sodium tetraborate buffer (0.1 M). An uncoated fused-silica capillary with an effective length of 50 cm x 75 microm id was used with an applied voltage of 30 kV with photodiode array detection at 231 nm. Linear calibrations were obtained within 0.111-1000 microg/mL of each element with LODs within 37-325 ng/mL. The developed method was tested for analysis of uranium ore samples indicating its presence within 103-1789 microg/g with RSD within 0.79-1.87%. Likewise copper, nickel, and iron in their combined matrix were also simultaneously determined with RSD 0.4-1.6% (n = 6).     

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one as an analytical reagent for micro determination of molybdenum(VI).

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one (CHMFC) has been used as an analytical reagent for the spectrophotometric determination of molybdenum. Molybdenum(VI) in the presence of several cations, anions and complexing agents forms a yellow 1:2 complex with CHMFC. The complex is quantitatively extractable into 1,2-dichloroethane from 1 mol dm(-3) acetic acid medium and is stable for more than 6 h. The complex shows an absorption maximum at 438 nm with a molar absorptivity of 5.36 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity equal to 0.0017 microg Mo cm(-2). The method obeys Beer's law up to 1.9 microg Mo ml(-1). The relative standard deviations are 0.2% for solutions and 0.5-1.5% for solid samples. The method is simple, selective, precise and rapid, and has been satisfactorily applied to the micro determination of molybdenum in various synthetic and standard samples.