Immobilization of trypsin onto 1,4-diisothiocyanatobenzene-activated porous glass for microreactor-based peptide mapping by capillary electrophoresis: Effect of calcium ions on the immobilization procedure

The immobilization conditions and kinetic behaviour of trypsin, covalently immobilized via the 1,4-diisothiocyanatobenzene (DITC) linker onto aminopropylated controlled pore glass (CPG) particles, have been evaluated to establish a rapid and efficient protocol for fabrication of an immobilized enzyme microreactor (IMER) for protein hydrolysis and subsequent peptide mapping. Addition of calcium ions to either the immobilization reaction solution or hydrolysis assay was studied for a synthetic substrate. Activity was slightly higher when immobilization was carried out in the presence of Ca²⁺ whereas more enzyme could be immobilized in its absence. A protocol requiring less than 3 h was devised to obtain maximal enzymatic activity with the lowest ratio of soluble trypsin to DITC-CPG particles. The resulting immobilized enzyme was found to retain an acceptable percentage (ca. 35%) of its activity after immobilization. The particles were dry-packed into a capillary to make a microscale IMER. Repeatability, reusability and digestion efficiency of the μIMER were investigated for the substrate β-casein using capillary electrophoretic-based peptide mapping. In initial tests, a single device showed reproducible peptide maps for 21 digestions lasting 2 h each, carried out over a period of 2 months. Complete digestion of β-casein could be achieved in a few minutes (86 s residence time in the μIMER followed by a wash step).     

Immobilization of trypsin on silica-coated fiberglass core in microchip for highly efficient proteolysis

In this report, trypsin was immobilized on silica-coated fiberglass core in microchip to form a core-changeable bioreactor for highly efficient proteolysis. To prepare the fiber core, a layer of organic-inorganic hybrid silica coating was prepared on the surface of a piece of glass fiber by a sol-gel method with tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) as precursors. Subsequently, trypsin was immobilized on the coating with the aid of glutaraldehyde. Prior to use, the enzyme-immobilized fiber was inserted into the channel of a microchip to form an in-channel fiber bioreactor. The novel bioreactor can be regenerated by changing its fiber core. The scanning electron microscopy images of the cross-section of a trypsin-immobilized fiber indicated that a layer of ∼1 μm thick film formed on the glass substrate. The feasibility and performance of the unique bioreactor were demonstrated by the tryptic digestion of bovine serum albumin (BSA) and cytochrome c (Cyt-c) and the digestion time was significantly reduced to less than 10 s. The digests were identified by MALDI-TOF MS with sequence coverages of 45% (BSA) and 77% (Cyt-c) that were comparable to those obtained by 12-h conventional in-solution tryptic digestion. The fiber-based microchip bioreactor provides a promising platform for the high-throughput protein identification.     

Bioconjugation of trypsin onto gold nanoparticles: Effect of surface chemistry on bioactivity

The systematic study of activity, long-time stability and auto-digestion of trypsin immobilized onto gold nanoparticles (GNPs) is described in this paper and compared to trypsin in-solution. Thereby, the influence of GNP's size and immobilization chemistry by various linkers differing in lipophilicity/hydrophilicity and spacer lengths was investigated with regard to the bioactivity of the conjugated enzyme. GNPs with different sizes were prepared by reduction and simultaneous stabilization with trisodium citrate and characterized by UV/vis spectra, dynamic light scattering (DLS), ζ-potential measurements and transmission electron microscopy (TEM). GNPs were derivatized by self-assembling of bifunctional thiol reagents on the nanoparticle (NP) surface via dative thiol-gold bond yielding a carboxylic acid functionalized surface. Trypsin was either attached directly via hydrophobic and ionic interactions onto the citrate stabilized GNPs or immobilized via EDC/NHS bioconjugation onto the carboxylic functionalized GNPs, respectively. The amount of bound trypsin was quantified by measuring the absorbance at 280 nm. The activity of bound enzyme and its Michaelis Menten kinetic parameter K_m and v_max were measured by the standard chromogenic substrate N_α-Benzoyl-DL-arginine 4-nitroanilide hydrochloride (BApNA). Finally, digestion of a standard protein mixture with the trypsin-conjugated NPs followed by analysis with LC–ESI-MS and successful MASCOT search demonstrated the applicability of the new heterogenous nano-structured biocatalyst. It could be shown that the amount of immobilized trypsin and its activity can be increased by a factor of 6 using a long hydrophilic spacer with simultaneous reduced auto-digestion and reduced digestion time. The applicability of the new trypsin bioreactor was proven by digestion of casein and identification of α- as well as κ-casein by subsequent MASCOT search.     

Immobilization of trypsin on miniature incandescent bulbs for infrared-assisted proteolysis

A novel efficient proteolysis approach was developed based on trypsin-immobilized miniature incandescent bulbs and infrared (IR) radiation. Trypsin was covalently immobilized in the chitosan coating on the outer surface of miniature incandescent bulbs with the aid of glutaraldehyde. When an illuminated enzyme-immobilized bulb was immersed in protein solution, the emitted IR radiation could trigger and accelerate heterogeneous protein digestion. The feasibility and performance of the novel proteolysis approach were demonstrated by the digestion of hemoglobin (HEM), cytochrome c (Cyt-c), lysozyme (LYS), and ovalbumin (OVA) and the digestion time was significantly reduced to 5 min. The obtained digests were identified by MALDI-TOF-MS with the sequence coverages of 91%, 77%, 80%, and 52% for HEM, Cyt-c, LYS, and OVA (200 ng μL⁻¹ each), respectively. The suitability of the prepared bulb bioreactors to complex proteins was demonstrated by digesting human serum.     

Development of a microbioreactor with ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) immobilized on a polyacrylamide-coated capillary at the outlet

A simple and fast method of immobilization of cell membrane suspension containing human ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) on a polyacrylamide-coated capillary was developed. The enzyme microbioreactor was prepared by hydrodynamic injection of a small plug of the polycationic electrolyte hexadimethrine bromide (HDB) followed by a suspension of an enzyme-containing membrane preparation. In order to shorten the enzyme assay time and to increase the throughput of the assay, the capillary was coated from the outlet end and all injections were performed from the outlet end of the capillary. For the monitoring of the enzymatic reaction, the substrate ATP dissolved in reaction buffer (140 mM NaCl, 5 mM KCl, 1 mM MgCl₂, 2 mM CaCl₂, and 10 mM Hepes, pH 7.4, internal standard: 10 μM UMP) in the absence or presence of inhibitor was injected electrokinetically and incubated in the microbioreactor for 1 min with 1 kV of applied voltage. Then, the electrophoretic separation of the reaction products was initiated by applying a constant current of 60 μA. A 50 mM phosphate buffer (pH 6.5) was used for the separations and the products were detected by UV absorbance at 260 nm. The new method was compared with an at-capillary-inlet method without immobilization of the enzyme. The results (K_m values, K_i values for inhibitor) obtained with both methods were similar and comparable with literature data. The developed outlet immobilized enzyme microreactor using a coated capillary is very fast, simple and most economic allowing multiple use of the enzyme.     

Determination of various alcohols based on a new immobilized enzyme fluorescence capillary analysis

A novel method for the determination of ethanol in tequila based on the immobilized enzyme fluorescence capillary analysis (IE-EFCA) has been proposed. Alcohol dehydrogenase (ADH) was immobilized in inner surface of a capillary and an immobilized enzyme capillary bioreactor (IE-ECBR) was formed. After nicotinamide adenine dinucleotide (NAD⁺) as an oxidizer is mixed with alcohol sample solution, it was sucked into the IE-ECBR. The fluorescence intensity of the mixed solution in the IE-ECBR was detected at λ_ex = 350 nm and λ_em = 459 nm. The experimental conditions are as follows: The reaction time is 20 min; temperature is 40 °C; the concentrations of phosphate buffer solution (pH 7.5) and NAD⁺ are 0.1 mol L⁻¹ and 5 mmol L⁻¹, respectively; immobilization concentration of ADH is 10 U L⁻¹. The determination range of ethanol is 2.0-15.0 g L⁻¹ (F = 10.44C + 6.6002, r > 0.9958); its detection limit is 1.11 g L⁻¹; and relative standard deviation is 1.9%. IE-EFCA method is applicable for the determination of the samples containing alcohol in medicine, industry and environment.     

Immobilization of trypsin on graphene oxide for microwave-assisted on-plate proteolysis combined with MALDI-MS analysis

With an ultra-high surface area and abundant functional groups, graphene oxide (GO) provides an ideal substrate for the immobilization of trypsin. We demonstrated that trypsin could be immobilized on GO sheets assisted by polymers as molecular spacers to maintain the activity of the enzyme. And with the trypsin-linked GO as the enzyme immobilization probe, a novel microwave-assisted on-plate digestion method has been developed with subsequent analysis by MALDI-MS. The feasibility and performance of the digestion approach were demonstrated by the proteolysis of standard proteins. The results show that this novel approach substantially accelerated proteolysis and reduced the time required for traditional procedures involving on-plate enzymatic digestion and sample preparation prior to MALDI-MS analysis. The novel digestion approach is simple and efficient, offering great promise for high throughput protein identification.     

Immobilization of trypsin onto multifunctional meso-/macroporous core-shell microspheres: A new platform for rapid enzymatic digestion

A simple, fast, efficient, and reusable microwave-assisted tryptic digestion system which was constructed by immobilization of trypsin onto porous core-shell Fe₃O₄@fTiO₂ microspheres has been developed. The nanostructure with magnetic core and titania shell has multiple pore sizes (2.4 and 15.0 nm), high pore volume (0.25 cm³ g⁻¹), and large surface area (50.45 m² g⁻¹). For the proteins, the system can realize fast and efficient microwave-assisted tryptic digestion. Various standard proteins (e.g., cytochrome c (cyt-c), myoglobin (MYO), β-lactoglobulin (β-LG), and bovine serum albumin (BSA)) used can be digested in 45 s under microwave radiation, and they can be confidently identified by mass spectrometry (MS) analysis; even the concentration of substrate is as low as 5 ng μL⁻¹. Furthermore, the system for the 45 s microwave-assisted tryptic digestion is still effective after the trypsin-immobilized microspheres have been reused for 5 times. Importantly, 1715 unique proteins from 10 μg mouse brain proteins can be identified with high confidence after treatment of 45 s microwave-assisted tryptic digestion.     

Glutaraldehyde activated eggshell membrane for immobilization of tyrosinase from Amorphophallus companulatus: application in construction of electrochemical biosensor for dopamine

Tyrosinase from a plant source Amorphophallus companulatus was immobilized on eggshell membrane using glutaraldehyde. Among the three different approaches used for immobilization, activation of eggshell membrane by glutaraldehyde followed by enzyme adsorption on activated support could stabilize the enzyme tyrosinase and was found to be effective. K_m and V_max values for dopamine hydrochloride calculated from Lineweaver-Burk plot were 0.67 mM and 0.08 mM min⁻¹, respectively. Studies on effect of pH showed retention of more than 90% activity over a pH range 5.0-6.5. Membrane bound enzyme exhibited consistent activity in the temperature range 20-45 °C. Shelf life of immobilized tyrosinase system was found to be more than 6 months when stored in phosphate buffer at 4 °C. An electrochemical biosensor for dopamine was developed by mounting the tyrosinase immobilized eggshell membrane on the surface of glassy carbon electrode. Dopamine concentrations were determined by the direct reduction of biocatalytically liberated quinone species at −0.19 V versus Ag/AgCl (3 M KCl). Linearity was observed within the range of 50-250 μM with a detection limit of 25 μM.     

Amperometric hydrogen peroxide biosensor based on the immobilization of heme proteins on gold nanoparticles-bacteria cellulose nanofibers nanocomposite

A novel matrix, gold nanoparticles-bacterial cellulose nanofibers (Au-BC) nanocomposite was developed for enzyme immobilization and biosensor fabrication due to its unique properties such as satisfying biocompatibility, good conductivity and extensive surface area, which were inherited from both gold nanoparticles (AuNPs) and bacterial cellulose nanofibers (BC). Heme proteins such as horseradish peroxidase (HRP), hemoglobin (Hb) and myoglobin (Mb) were successfully immobilized on the surface of Au-BC nanocomposite modified glassy carbon electrode (GCE). The immobilized heme proteins showed electrocatalytic activities to the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ), which might be due to the fact that heme proteins retained the near-native secondary structures in the Au-BC nanocomposite which was proved by UV-vis and IR spectra. The response of the developed biosensor to H₂O₂ was related to the amount of AuNPs in Au-BC nanocomposite, indicating that the AuNPs in BC network played an important role in the biosensor performance. Under the optimum conditions, the biosensor based on HRP exhibited a fast amperometric response (within 1 s) to H₂O₂, a good linear response over a wide range of concentration from 0.3 μM to 1.00 mM, and a low detection limit of 0.1 μM based on S/N = 3. The high performance of the biosensor made Au-BC nanocomposite superior to other materials as immobilization matrix.     

Phospholipase C-catalyzed sphingomyelin hydrolysis in a membrane reactor for ceramide production

A membrane reactor for the production of ceramide through sphingomyelin hydrolysis with phospholipase C from Clostridium perfringens was studied for the first time. Ceramide has raised a large interest as an active component in both pharmaceutical and cosmetic industry. The enzymatic hydrolysis of sphingomyelin has been proven to be a feasible method to produce ceramide. In the membrane reactor constructed, the aqueous phase and the organic phase were separated by a membrane containing the immobilized enzyme, while the organic phase was continuously circulated. Among the 10 selected membranes, the enzyme immobilized in membrane RC 70PP had low immobilization efficiency, but retained the highest catalytic activity. Three immobilization methods, i.e. filtration (adsorption/entrapment), covalent binding, and cross-linking, were compared. The enzyme immobilized by filtration had the highest activity even under the low fixation level (9.4%). The optimal flow rate of the organic phase was 5 ml/min. High initial enzyme amount in the immobilization led to the decrease in the fixation level. Both the initial reaction rate and the specific activity of the enzyme increased with increasing enzyme loading, and slightly decreased after the immobilized enzyme amount over 50 μg in 9.6 cm² membrane area. The immobilized enzyme retained 16% of the original activity after five cycles. Finally, the liquid enzyme, the enzyme immobilized on particle carriers, and the enzyme immobilized in the membrane were compared. The study demonstrated the improved enzyme reusability, the fast immobilization process, the straightforward up-scaling and the combination of the hydrolysis with the product separation in the membrane reactor developed.     

High throughput tryptic digestion via poly (acrylamide-co-methylenebisacrylamide) monolith based immobilized enzyme reactor

A poly (acrylamide-co-methylenebisacrylamide) (poly (AAm-co-MBA)) monolith was prepared by thermal polymerization in the 100 or 250 μm i.d. capillary. The monolithic support was activated by ethylenediamine followed by glutaraldehyde. Trypsin was then introduced to form an immobilized enzyme reactor (IMER). The prepared IMER showed a reliable mechanical stability and permeability (permeability constant K = 2.65 × 10⁻¹³ m²). With BSA as the model protein, efficient digestion was completed within 20 s, yielding the sequence coverage of 57%, better than that obtained from the traditional in-solution digestion (42%), which took about 12 h. Moreover, BSA down to femtomole was efficiently digested by the IMER and positively identified by matrix assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). To test the applicability of IMER for complex sample profiling, proteins extracted from Escherichia coli were digested by the IMER and further analyzed by nanoreversed phase liquid chromatography-electrospray ionization-mass spectrometry (nanoRPLC-ESI-MS/MS). In comparison to in-solution digestion, despite slightly fewer proteins were positively identified at a false discovery rate (FDR) of ∼1% (333 vs 411), the digestion time used was largely shortened (20 s vs 24 h), implying superior digestion performance for the high throughput analysis of complex samples.     

Efficient sample proteolysis based on a microchip containing a glass fiber core with immobilized trypsin

Trypsin was immobilized on cellulose-coated glass fibers via a condensation reaction between the aldehyde groups of the oxidized cellulose and the primary amino groups of trypsin. A piece of the modified fiber was inserted into the main channel of a poly(methyl methacrylate) microchip to form a microfluidic proteolytic bioreactor. Scanning electron microscopy of the cross section of the fiber revealed a rough film on the surface of the fiber glass. The performance of the bioreactor was demonstrated by the tryptic digestion of hemoglobin and cytochrome c, where the time for digestion was reduced to <10?s. The digests were identified by MALDI-TOF-MS to obtain peptide mass fingerprint spectra. The results indicated that the digestion in the microfluidic bioreactor is comparable to that of a 12-h solution tryptic digest and thus provides a promising platform for the high throughput identification of proteins.

Improvement of the homogeneity of protein-imprinted polymer films by orientated immobilization of the template

A method for preparing homogeneous protein-imprinted polymer films with orientated immobilization of template is described. The template methyl parathion hydrolase (MPH) was modified with a peptide linker (Gly-Ser)₅–Cys and was immobilized on a cover glass with a fixed orientation via the linker. The activity of the fusion enzyme (MPH-L) was evaluated by determining the product's absorbance at 405 nm (A₄₀₅). Both the free and the immobilized MPH-L showed higher retention of the bioactivity than the wide type enzyme (MPH-W) as revealed by the A₄₀₅ values for MPH-L_free/MPH-W_free (1.159/1.111) and for MPH-L_immobilized/MPH-W_immobilized (0.348/0.118). The immobilized MPH-L also formed a more homogeneous template stamp compared to the immobilized MPH-W. The molecularly imprinted polymer films prepared with the immobilized MPH-L exhibited high homogeneity with low Std. Deviations of 80 and 200 from the CL intensity mean volumes which were observed for batch-prepared films and an individual film, respectively. MPH-L-imprinted polymer film also had a larger template binding capacity indicated by higher CL intensity mean volume of 3900 INT over 2500 INT for MPH-W-imprinted films. The imprinted film prepared with the orientated immobilization of template showed an imprinting factor of 1.7, while the controls did not show an imprinting effect.     

Immobilization of Acidithiobacillus ferrooxidans with complex of PVA and sodium alginate

A new Acidithiobacillus ferrooxidans cell immobilization technique utilizing the complex of PVA solution and sodium alginate solution crosslinked by Ca(NO₃)₂ as entrapment medium is reported. The mixture of A. ferrooxidans suspension and the entrapment complex were extruded into a solution of Ca(NO₃)₂ (1-5%) to form beads, then the beads were frozen at −20 °C for 1-2 days and thawed at room temperature. The forming mechanism, characteristic of this immobilized beads and the factors affecting activity of immobilized cells were also discussed. A maximum oxidation rate of 4.6 g Fe²⁺/(L h) was achieved in batch cultures by these immobilized cells. Precipitation formed during culture process was analyzed. The forming mechanism of this precipitation and how this precipitation affects the whole system were also discussed. In addition, the immobilization technique is operated simply, and the gel beads have high stability even under non-sterile conditions. So its application on an industrial scale would be more practicable.     

Immobilization of acetylcholinesterase on screen-printed electrodes: comparative study between three immobilization methods and applications to the detection of organophosphorus insecticides

The analytical performance of three acetylcholinesterase (AChE) screen-printed biosensors designed for the detection of pesticides are evaluated. Bioencapsulation of the enzyme in a sol-gel composite and immobilization by metal-chelate affinity were compared with the entrapment of the enzyme in a photopolymerisable polymer. A very low amount of enzyme ranging between 0.8 and 1.2 mIU was immobilized on the electrode surface in each approach. The sensors exhibited a storage stability of over 6 months when the enzyme was encapsulated in a polymer film. Pesticide concentrations in the range of 10⁻⁸ to 10⁻⁹ M paraoxon, dichlorvos and chlorpyrifos ethyl oxon could be detected according to each configuration by following an incubation time of 20 min.     

Entrapment of plant invertase within novel composite of agarose-guar gum biopolymer membrane

Invertase or β-d-Fructofuranosidase (E.C.3.2.1.26) was extracted from Cucumis melo. L. fruit (Family-Cucurbitaceae). Soluble, plant invertase enzyme was immobilized in novel composite of agarose-guar gum biopolymer matrix in the form of hydrophilic, porous membranes. The immobilized invertase was characterized for sucrose hydrolytic activity and leakage from the matrix support. The efficiency of immobilization was found to be 91% with negligible leaching. The kinetic parameters K_m and V_max for free and immobilized invertase were also determined. Immobilized invertase was optimally active in the wide pH range of 4.5-6.5. The immobilization process also enhanced the thermal stability of enzyme up to 65 °C. Immobilized invertase membranes showed excellent storage stability with shelf life of 110 days. Entrapped invertase showed better operational stability and reusability up to 12 cycles. The fluorescence spectra of the composite membranes were studied and compared with that of soluble enzyme. All these characteristics of the immobilized invertase membranes make them suitable for the fabrication of biosensors.     

Use of CdSe/ZnS luminescent quantum dots incorporated within sol-gel matrix for urea detection

In this work, urea detection techniques based on the pH sensitivity of CdSe/ZnS QDs were developed using three types of sol-gel membranes: a QD-entrapped membrane, urease-immobilized membrane and double layer consisting of a QD-entrapped membrane and urease-immobilized membrane. The surface morphology of the sol-gel membranes deposited on the wells in a 24-well microtiter plate was investigated. The linear detection range of urea was in the range of 0-10 mM with the three types of sol-gel membranes. The urea detection technique based on the double layer consisting of the QD-entrapped membrane and urease-immobilized membrane resulted in the highest sensitivity to urea due to the Michaelis-Menten kinetic parameters. That is, the Michaelis-Menten constant (K_m =2.0745 mM) of the free urease in the QD-entrapped membrane was about 4-fold higher than that (K_m =0.549 mM) of the immobilized urease in the urease-immobilized membrane and about 12-fold higher than that (K_m =0.1698 mM) of the immobilized urease in the double layer. The good stability of the three sol-gel membranes for urea sensing over 2 months showed that the use of sol-gel membranes immobilized with QDs or an enzyme is suitable for biomedical and environmental applications.     

Amperometric determination of choline with enzyme immobilized in a hybrid mesoporous membrane

Choline sensor is successfully prepared by using immobilized enzyme, i.e., choline oxidase (ChOx) within a hybrid mesoporous membrane with 12 nm pore diameter (F127M). The measurement was based on the detection of hydrogen peroxide, which is the co-product of the enzymatic choline oxidation. The determination range and the response time are 5.0-800 μM and approximately 2 min, respectively. The sensor is very stable compared to the native enzyme sensor and 85% of the initial response was maintained even after storage for 80 days. These results indicate that ChOx is successfully immobilized and well stabilized, and at the same time, enzyme reaction proceeds efficiently. Such ability of hybrid mesoporous membrane F127M suggests great promise for effective immobilization of enzyme useful for electrochemical biosensors.     

基于DNA链置换反应的新型固定化酶反应器制备及应用

建立了一种新型的酶固定化方法,采用DNA链置换反应成功地在单链DNA标记的磁性纳米粒子上实现了酶的链置换无损更替。该技术可实现目标酶的再利用,节约了生产成本。制备的固定化胰蛋白酶微反应器具有较好的重复利用性和高酶切效率,重复使用10次后仍可保持原酶活性的86%;利用链置换反应制备的MNPs@DNATrypsin酶切马心肌红蛋白5 min后,即可获得95%±0%(n=3)的氨基酸序列覆盖率,远超过相同条件下自由酶酶切12 h的结果。实验表明,发展的固定化酶技术具有高磁响应性,便于从反应体系中回收固定化酶和重复使用,同时此技术可显著提高酶活性,因此可用于固定各种重要的酶,同时可将其广泛应用于各种酶促反应中。