The investigation of a series of n-hydroxybenzoic acids (n=p, m, o) on a new surface enhanced Raman scattering active substrate

Ag nanoparticles, organized on indium tin oxide (ITO) surface, can act as a new surface enhanced Raman scattering (SERS) active substrate as well as a dry electrode. Compared with the traditional SERS-active substrate, its notable advantage is that the microcosmic changes of the film can be reflected by the SERS spectrum during the investigation of the film's electrical and other macroscopic characteristics. To illuminate the above-mentioned property of this new substrate, a series of n-hydroxybenzoic acids (n-HBA; n=p, m and o) was tested as probe molecules by SERS technique. These SERS spectra indicate that the significant changes of frequencies as well as intensities, respectively, arise from the changes of the adsorption behavior along with the proportional variation of molecules and silver nanoparticles. Excellent SERS signals prove that the silver nanoparticles-coated ITO is a highly SERS-active substrate and can efficiently reflect the microcosmic property of the film, which suggest it has promising potential of being a new technique for further application in the field of thin-film research.     

Stable and efficient silver substrates for SERS spectroscopy

Silver substrates have been obtained, by depositing silver colloidal nanoparticles on a roughened silver plate treated with 1,10-phenanthroline, and checked by means of AFM microscopy and Raman spectroscopy. The ligand molecules are located between two silver substrates and undergo the SERS (Surface Enhanced Raman Scattering) enhancement of both the roughened silver plate and the silver colloidal layer deposited on it. These SERS-active substrates, which show the advantages of being stable with respect to the metal colloidal suspensions, along with an easy and reproducible preparation, can be very useful for catalytic and analytical applications of the SERS spectroscopy.     

Adsorption Behaviors of 4-Mercaptobenzoic Acid on Silver and Gold Films

The adsorption behaviors of 4-mercaptobenzoic acid on silver and gold nanoparticles were studied by surface-enhanced Raman scattering (SERS) and density functional theory. The silver and gold films by electrodeposition have the same excellent characteristics as SERS-active substrates. At the same, the SERS spectra indicate that 4-mercaptobenzoic acid molecules are adsorbed on the surfaces of gold nanoparticles through the S atom, and that the carboxyl group is far away from surface of gold nanoparticles, and that there is a certain angle between the plane of benzene ring and gold film. However, 4-mercaptobenzoic acid molecules are adsorbed on the surfaces of silver nanoparticles through the carboxyl group, and the S atom is far away from surface of silver nanoparticles, and there is also a certain angle between the plane of benzene ring and the surface of silver nanoparticles. Here it is demonstrated the calculated Raman frequencies are in good agreement with experimental values, and the calculated Raman frequencies are also helpful to infer the adsorption behaviors of 4-mercaptobenzoic acid molecules.     

Surface-enhanced Raman scattering system of sample molecules in silver-modified silver film

Surface-enhanced Raman scattering (SERS) spectrum of very good quality of "silver nano-particles/sample molecules/silver film" system was reported by nesting the sample molecules to the gap of silver nano-particles and silver film, indicating that "silver nano-particles/sample molecules/silver film" is a highly SERS-active system. Not only was the number of the vibrational modes increased, but also were the frequencies of Raman bands up and down shifted. It is difficult to separate the contributions of the electromagnetic and chemical mechanisms to the great enhancement of the Raman signal. The shift by 5-30cm(-1) of the SERS bands and the change in their relative intensity compared with the ordinary Raman spectrum indicate the chemisorption of the sample molecules on the silver-modified silver surface. Furthermore, the silver nano-particles modified on the rough silver film surface play an important role in magnifying the surface local electric field near the silver surface through resonant surface plasmon excitation. From the rich information, obtained from high-quality SERS of PHBA in ternary system, we inferred that PHBA molecules in ternary system adsorb onto the metal surfaces through carboxyl at a perpendicular orientation.     

Time-dependent SERS of pseudoisocyanine on silver particles generated in silver bromide sol by laser illumination

SERS spectra of pseudoisocyanine dye (PIC) in silver bromide sols show a strong time-dependence. The enhancement factor, in general, follows the formation (and destruction) of SERS-active colloidal silver in the silver halide sols by laser illumination during the Raman measurement. Changes in the relative intensities within a characteristic fine triplet of the SERS spectrum show that the surface potential which is “seen” by the dye molecules shifts to more positive values with longer times. In particular, the values of the potential hint at the existence of Ag₁ and Ag₄ … Ag₆ clusters as SERS-active adsorption sites of the dye molecules in AgBr sols.     

The adsorption behavior of p-hydroxybenzoic acid on a silver-coated filter paper by surface enhanced Raman scattering

On dried filter paper coated with silver nanoparticles, surface-enhanced Raman scattering (SERS) spectra of p-hydroxybenzoic acid (PHBA) were studied, and high-quality SERS spectra were obtained, indicating that the silver-coated filter paper is a highly SERS-active substrate. The analysis showed that the adsorption behavior of PHBA molecules on silver nanoparticles coated on filter paper was different from that in silver aqueous colloids. On the filter paper, it was found that the SERS spectra of PHBA changed with the proportion of PHBA molecules and silver nanoparticles, indicating that the adsorption behavior of PHBA molecules changed with the proportion. The probable reasons are given.     

Investigation of chemically modified barium titanate beads as surface-enhanced Raman scattering (SERS) active substrates for the detection of benzene thiol, 1,2-benzene dithiol, and rhodamine 6G

SERS active surfaces were prepared by depositing silver films using Tollen's reaction on to barium titanate beads. The SERS activity of the resulting surfaces was probed using two thiols (benzene thiol and 1,2-benzene dithiol) and rhodamine 6G. The intensity of the SERS signal for the three analytes was investigated as a function of silver deposition time. The results indicate that the SERS intensity increased with increasing thickness of the silver film until a maximum signal intensity was achieved; additional silver deposition resulted in a decrease in the SERS intensity for all of the studied molecules. SEM measurement of the Ag coated barium titanate beads, as a function of silver deposition time, indicate that maximum SERS intensity corresponded with the formation of atomic scale islands of silver nanoparticles. Complete silver coverage of the beads resulted in a decreased SERS signal and the most intense SERS signals were observed at deposition times of 30 min for the thiols and 20 min for rhodamine 6G.     

Quantitative SERS sensors for environmental analysis of naphthalene

In the investigation of chemical pollutants, such as PAHs (Polycyclic Aromatic Hydrocarbons) at low concentration in aqueous medium, Surface-Enhanced Raman Scattering (SERS) stands for an alternative to the inherent low cross-section of normal Raman scattering. Indeed, SERS is a very sensitive spectroscopic technique due to the excitation of the surface plasmon modes of the nanostructured metallic film. The surface of quartz substrates was coated with a hydrophobic film obtained by silanization and subsequently reacted with polystyrene (PS) beads coated with gold nanoparticles. The hydrophobic surface of the SERS substrates pre-concentrates non-polar molecules such as naphthalene. Under laser excitation, the SERS-active substrates allow the detection and the identification of the target molecules localized close to the gold nanoparticles. The morphology of the SERS substrates based on polystyrene beads surrounded by gold nanoparticles was characterized by scanning electron microscopy (SEM). Furthermore, the Raman fingerprint of the polystyrene stands for an internal spectral reference. To this extent, an innovative method to detect and to quantify organic molecules, as naphthalene in the range of 1 to 20 ppm, in aqueous media was carried out. Such SERS-active substrates tend towards an application as quantitative SERS sensors for the environmental analysis of naphthalene.     

Surface-enhanced Raman scattering of single-walled carbon nanotubes on modified silver electrode

A roughed silver electrode modified with gold/silver nanoparticles is used as a substrate, on which high quality SERS of SWCNTs are obtained, indicating that the modified silver electrode is a high-quality SERS-active substrate for SWCNTs. Some new bands that indicate the structure of SWCNTs were obtained. The gold/silver nanoparticles modified on the roughed silver electrode surface can not only make sure the strong adsorption of SWCNTs in this system but also play an important role in magnifying the surface local electric field near the silver electrode surface through resonant surface plasmon excitation. From the rich information on the modified silver electrode obtained from the SERS and the potential dependent SERS, we may deduce the probable SERS mechanism in the process. The theory and experiment results indicate that it is can be used as a new technique for monitoring synthesis quality of SWCNTs. The probable reasons are given.     

Investigation of p-hydroxybenzoic acid from a new surface-enhanced Raman scattering system

In this paper, we developed a new kind of substrate, silver-coated indium tin oxide (ITO), to investigate the character of surface-enhanced Raman scattering (SERS) of p-hydroxybenzoic acid (PHBA). Homogeneous Ag-coated ITO substrate was obtained by decomposing AgNO(3) on the surface of ITO. A SERS spectrum of very good quality of "silver nanoparticles/PHBA/silver-coated ITO" was reported by adding PHBA aqueous solution and silver colloid onto the surface of silver-coated ITO repeatedly. PHBA molecules absorbed onto the surface of the silver nanoparticles through ionized carboxyl, and the PHBA molecules tended to tilt on the surface in this system. The rich information obtained from the silver nanoparticles/PHBA/silver-coated ITO system indicates that this is a highly SERS-active system. Not only was the number of the vibrational modes increased, but also were the frequencies of Raman bands shifted. The two SERS mechanisms, the "electromagnetic" and "chemical" mechanism, were mainly responsible for the experimental results. Furthermore, the silver nanoparticles modified on the silver-coated ITO surface play an important role in magnifying the surface local electric field near the silver film surface through resonant surface plasmon excitation.     

DNA-network-templated self-assembly of silver nanoparticles and their application in surface-enhanced Raman scattering

A large-scale lambda-DNA network on a mica surface was successfully fabricated with a simple method. Silver nanoparticles capped with the cationic surfactant cetyltrimethylammonium bromide (CTAB) were self-assembled onto a two-dimensional DNA network template by electrostatic interaction and formed nanoporous silver films, which can be used as active surface-enhanced raman scattering (SERS) substrates. Two probe molecules, Rhodamine 6G (R6G) and 4-aminothiophenol (4-ATP), were studied on these substrates with very low concentrations, and great enhancement factors for R6G (0.21 x 10(10)-4.09 x 10(11)) and 4-ATP (approximately 1.70 x 10(5)) were observed. It was found that the enhancement ability was affected by the DNA concentration and the electrostatic absorption time of the CTAB-stabilized silver nanoparticles on the DNA strands. These SERS substrates formed by the self-assembly of silver nanoparticles on DNA network also show good stability and reproducibility in our experiments.     

3D aluminum/silver hierarchical nanostructure with large areas of dense hot spots for surface‐enhanced raman scattering

Plasmonic nanomaterials possessing large‐volume, high‐density hot spots with high field enhancement are highly desirable for ultrasensitive surface‐enhanced Raman scattering (SERS) sensing. However, many as‐prepared plasmonic nanomaterials are limited in available dense hot spots and in sample size, which greatly hinder their wide applications in SERS devices. Here, we develop a two‐step physical deposition protocol and successfully fabricate 3D hierarchical nanostructures with highly dense hot spots across a large scale (6 × 6 cm²). The nanopatterned aluminum film was first prepared by thermal evaporation process, which can provide 3D quasi‐periodic cloud‐like nanostructure arrays suitable for noble metal deposition; then a large number of silver nanoparticles with controllable shape and size were decorated onto the alumina layer surfaces by laser molecular beam epitaxy, which can realize large‐area accessible dense hot spots. The optimized 3D‐structured SERS substrate exhibits high‐quality detection performance with excellent reproducibility (13.1 and 17.1%), whose LOD of rhodamine 6G molecules was 10^?9 M. Furthermore, the as‐prepared 3D aluminum/silver SERS substrate was applied in detection of melamine with the concentration down to 10^?7 M and direct detection of melamine in infant formula solution with the concentration as low 10 mg/L. Such method to realize large‐area hierarchical nanostructures can greatly simplify the fabrication procedure for 3D SERS platforms, and should be of technological significance in mass production of SERS‐based sensors.     

Synthesis and Characterization of Silver Nanoparticle Modified 3-Aminophenol Resin Microspheres with Application for Determination of Carcinoembryonic Antigens by Surface-Enhanced Raman Scattering

Uniform phenolic resin microspheres were prepared by the polycondensation of 3-aminophenol and formaldehyde. On the surface of the 3-aminophenol resin microspheres, silver nanoparticles were synthesized in situ and immobilized by simple heating. The composite was employed as a substrate for surface-enhanced Raman scattering (SERS). The SERS enhancement factor was evaluated using 4-mercaptobenzoic acid and Nile blue A as signal molecules. A highly sensitive SERS immunoassay that combined labeled antibody conjugated silver nanoparticle modified 3-aminophenol resin microspheres and coating antibody conjugated magnetic nanoparticles was fabricated to determine carcinoembryonic antigen. A linear relationship was obtained between the Raman intensity and the concentration of carcinoembryonic antigen. The limit of detection was 1.2 picograms per milliliter at a signal-to-noise ratio of three. This is believed to be the first report of a SERS immunoassay using silver nanoparticle modified 3-aminophenol resin microspheres as substrates.     

An ionic surfactant-mediated Langmuir-Blodgett method to construct gold nanoparticle films for surface-enhanced Raman scattering

A gold nanoparticle film for surface-enhanced Raman scattering (SERS) was successfully constructed by an ionic surfactant-mediated Langmuir-Blodgett (LB) method. The gold film was formed by adding ethanol to a gold colloid/hexane mixture in the presence of dodecyltrimethylammonium bromide (DTAB). Consequently, gold nanoparticles (AuNPs) assembled at the water/hexane interface due to the decrease in surface charge density of AuNPs. Since DTAB binds the gold surface by a coulombic force, rather than a chemical bonding, it is easily replaced by target molecules for SERS purposes. The SERS enhancement factor of the 80 nm gold nanoparticle film was approximately 1.2 × 10(6) using crystal violet (CV) as a Raman dye. The SERS signal from the proposed DTAB-mediated film was approximately 10 times higher than that from the octanethiol-modified gold film, while the reproducibility and stability of this film compared to an octanethiol-modified film were similar. This method can also be applied to other metal nanostructures to fabricate metal films for use as a sensitive SERS substrate with a higher enhancement factor.     

Surface-enhanced Raman scattering on silver nanostructured films prepared by spray-deposition

Silver nanostructured films were directly prepared by spray deposition of preformed polyol-based Ag-PVP nanoparticles. These homogeneous films of high optical quality were tested as SERS-active substrates. Laser excitation at 514.5 nm within the red part of the plasmon band leads to intense and reproducible SERS spectra of acridine, used as the probe molecule. From SERS measurements at different pH values, it was possible to determine the apparent pK(a) of acridine and to obtain specific surface properties of the film. Finally, these SERS titrations along with enhancement factor estimates allowed us to further depict the nature of the films.     

Surface-enhanced Raman scattering measurements on silver nanoparticles covered with differently formed platinum films

Gold and silver electromagnetic nanoresonators covered by a thin layer of platinum are often used to study adsorption of various molecules on “model platinum surfaces” with surface-enhanced Raman scattering (SERS) spectroscopy. In this contribution spectra of pyridine adsorbed on films formed from core–shell Ag@Pt and Ag@Ag–Pt nanoparticles and pure Pt or Ag nanoparticles were measured using a confocal Raman microscope. The SERS spectra of pyridine adsorbed on alloy Ag@Ag–Pt nanoparticles could not be obtained as a linear combination of spectra measured on pure Ag and Pt surfaces. In other words, for silver electromagnetic nanoresonators covered by platinum there is no simple correlation between the “quality” of the deposited Pt layer and the relative intensity of SERS bands characteristic for adsorbate interacting with silver. The SERS spectra accumulated from various places of a film formed from Ag@Pt or Ag@Ag–Pt nanoclusters may differ significantly. Using Ag@Pt nanoparticles with practically negligible amount of Ag on the surface (as per the stripping measurement), it is possible to record SERS spectrum in which the contribution characteristic for pyridine adsorbed on the Ag surface is well visible. It means that, even for macroscopic samples of core–shell Ag–Pt nanoparticles, averaging of many spectra measured at various locations of the sample should be carried out to characterize reliably their properties.     

In situ dynamic measurements of the enhanced SERS signal using an optoelectrofluidic SERS platform

A novel active surface-enhanced Raman scattering (SERS) platform for dynamic on-demand generation of SERS active sites based on optoelectrofluidics is presented in this paper. When a laser source is projected into a sample solution containing metal nanoparticles in an optoelectrofluidic device and an alternating current (ac) electric field is applied, the metal nanoparticles are spontaneously concentrated and assembled within the laser spot, form SERS-active sites, and enhance the Raman signal significantly, allowing dynamic and more sensitive SERS detection. In this simple platform, in which a glass slide-like optoelectrofluidic device is integrated into a conventional SERS detection system, both dynamic concentration of metal nanoparticles and in situ detection of SERS signal are simultaneously possible with only a single laser source. This optoelectrofluidic SERS spectroscopy allows on-demand generation of 'hot spots' at specific regions of interest, and highly sensitive, reliable, and stable SERS measurements of the target molecules in a tiny volume (～500 nL) of liquid sample without any fluidic components and complicated systems.     

Nanoparticle-mirror sandwich substrates for surface-enhanced Raman scattering

Sandwich surface-enhanced Raman scattering (SERS) substrates (3S) utilizing coupling between continuous metal films and plasmonic particles were fabricated using silver mirrors, electrochemically roughened films, and various sizes of silver nanoparticles. The effect of excitation wavelength and nanoparticle size on SERS spectra of poly(vinylpyridine), selected as a model compound, was studied to determine the optimum conditions for the strongest SERS signal. The Raman enhancement resulted from the plasmon coupling of silver nanoparticles to the underlying continuous film as well as the lateral plasmon coupling between the silver nanoparticles. The formation of the charge transfer complex was also observed. The 3S configuration was used to obtain SERS spectra of dipicolinic acid (DPA), a chemical signature for Bacillus anthracis.     

Bimetallic gold–silver nanoplate array as a highly active SERS substrate for detection of streptavidin/biotin assemblies

The silver-modified gold nanoplate arrays as bimetallic surface-enhanced Raman scattering (SERS) substrates were optimized for the surface-enhanced Raman detection of streptavidin/biotin monolayer assemblies. The bimetallic gold–silver nanoplate arrays were fabricated by coating silver nanoparticles uniformly on the gold nanoplate arrays. Depending on silver nanoparticle coating, the localized surface plasmon resonance (LSPR) peak of the bimetallic gold–silver nanoplate arrays blue-shifted and broadened significantly. The common probe molecule, Niel Blue A sulfate (NBA) was used for testing the SERS activity of the bimetallic gold–silver nanoplate arrays. The SERS intensity increased with the silver nanoparticle coating, due to a large number of hot spots and nanoparticle interfaces. The platforms were tested against a monolayer of streptavidin functionalized over the bimetallic gold–silver nanoplate arrays showing that good quality spectra could be acquired with a short acquisition time. The supramolecular interaction between streptavidin (strep) and biotin showed subsequent modification of Raman spectra that implied a change of the secondary structure of the host biomolecule. And the detection concentration for biotin by this method was as low as 1.0 nM. The enhanced SERS performance of such bimetallic gold–silver nanoplate arrays could spur further interest in the integration of highly sensitive biosensors for rapid, nondestructive, and quantitative bioanalysis, particularly in microfluidics.     

Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.