Fabrication and characterisation of a mixed oxide-covered mesh electrode composed of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> and its capability of generating hydroxyl radicals during the oxygen evolution reaction in electrolyte-free water

A mixed oxide-covered mesh electrode composed of NiCo₂O₄ (MOME-NiCo₂O₄) was prepared on a stainless-steel substrate using thermal decomposition (slow-cooling rate method). Surface, bulk and electrochemical properties of MOME were studied using different techniques, namely scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) with determination of the electrochemical porosity (?) and morphology factor (φ) parameters, quasi-stationary polarisation curves (PC) and electrochemical impedance spectroscopy (EIS). SEM images revealed a good coverage of the metallic wires by a compact oxide layer (absence of cracks). XRD analysis confirmed the formation of the spinel NiCo₂O₄ with the presence of NiO. The ‘in situ’ surface parameters denoted as ? and φ exhibited values of 0.39 and 0.33, respectively, revealing that the electrochemically active surface area is mainly confined to the ‘outer/external’ surface regions of the oxide layer. The PC was characterised by two Tafel slopes distributed in the low (b ₁ = 46 mV dec^?1) and high (b ₂ = 59 mV dec^?1) overpotential domains. The corresponding apparent exchange current densities were j ₀₍₁₎ = (3.43 ± 0.11) × 10^?6 A cm^?2 and j ₀₍₂₎ = (6.70 ± 0.08) × 10^?6 A cm^?2, respectively. The EIS study accomplished in the low-overpotential domain revealed a Tafel slope (b ₁) of 51 mV dec^?1. According to the spin-trapping reaction using N,N-dimethyl-p-nitrosoaniline (RNO), the MOME-NiCo₂O₄ electrode exhibited good performance for the generation of weakly adsorbed hydroxyl radicals (HO^?) during the OER in electrolyte-free water.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Coordination Chemistry of the Magic Inorganic Building Block {Fe<Superscript>II</Superscript>[Mo<Subscript>6</Subscript>P<Subscript>4</Subscript>O<Subscript>31</Subscript>]<Subscript>2</Subscript>}: Hydrothermal Synthesis and Crystal Structure of a New Reduced Ferrous Molybdophosphate

A new reduced ferrous molybdophosphate composite solid of the formula, [(C₁₀H₁₄N₂)H]₄[Fe^II ₁₀Mo^V ₂₄(H₂PO₄)₄(HPO₄)₁₂(PO₄)₄(H₂O)₁₆(OH)₁₆O₄₄]·12H₂O, has been synthesized from a reaction mixture of MoO₃, FeSO₄·7H₂O, C₂H₂O₄·2H₂O, nicotine, H₃PO₄, and H₂O under hydrothermal conditions. The crystal data: monoclinic, space group C2/m, a = 24.4349(124), b = 12.9935(66), c = 14.7281(74) Å, β = 104.87(1) Å, V = 4520(4) Å³, Z = 2, R ₁  = 0.0874, wR ₂  = 0.2179. The structure is built from the building blocks of the formula, {Fe^II[Mo₆P₄O₃₁]₂}, consisting of a network of MO₆ (M = Fe, Mo) octahedral and PO₄ tetrahedral linked through their vertices. The connectivity of the building blocks with two pairs of face-sharing dinuclear Fe(II) clusters of the formula of [Fe^II ₂(H₂O)₄O₅] on which a phosphate group is hanging gives rise to one-dimensional chains with eight-membered apertures. The remarkable hydrogen bonded interactions between the chains form a unique and interesting framework with three-dimensional intersecting tunnels where the protonated nicotine molecules as structuring templates and crystallization water molecules are situated.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

Study of variation in thermophysical properties of RE<Subscript>6</Subscript>UO<Subscript>12</Subscript>(s) along the lanthanide series

The novel ligand N,N,N′′′′,N′′′′-tetrabutyl-N′′′,N′′′-(N″,N″-diethyl)-ethidene bisdiglycolamide (TBEE-BisDGA) and other eight analogous extractants have been synthesized and characterized by NMR and HRMS. The solvent extraction of Th⁴⁺, UO₂ ²⁺ and Eu³⁺ from nitric acid solution using the above BisDGA extractants was investigated in 1-dodecanol at 30 ± 1 °C. The extractants exhibited higher affinity toward Th⁴⁺ than UO₂ ²⁺ and Eu³⁺ in the present system. The maximum value of separation factor SF _Th(IV)/U(VI) and SF _{Th(IV)/Eu(III)} is 78.5 and 53.3 respectively for TBEE-BisDGA, 88.1 and 69.5 respectively in the case of TB ^i-PE-BisDGA at 3 M HNO₃ solution.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Thermal properties,phase transitions,vibrational and reorientational dynamics of [Mn(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

[Mn(NH₃)₆](NO₃)₂ crystallizes in the cubic, fluorite (C1) type crystal lattice structure (Fm \( \overline{3} \) m) with a = 11.0056 Å and Z = 4. Two phase transitions of the first-order type were detected. The first registered on DSC curves as a large anomaly at T _C1 ^h  = 207.8 K and T _C1 ^c  = 207.2 K, and the second registered as a smaller anomaly at T _C2 ^h  = 184.4 K and T _C2 ^c  = 160.8 K (where the upper indexes h and c denote heating and cooling of the sample, respectively). The temperature dependence of the full width at half maximum of the band associated with the δ_s(HNH)F_1u mode suggests that the NH₃ ligands in the high temperature and intermediate phase reorientate quickly with correlation times in the order of several picoseconds and with activation energy of 9.9 kJ mol^?1. In the phase transition at T _C2 ^c probably only a some of the NH₃ ligands stop their reorientation, while the remainders continue to reorientate quickly with activation energy of 7.7 kJ mol^?1. Thermal decomposition of the investigated compound starts at 305 K and continues up to 525 K in four main stages (I–IV). In stage I, ²/₆ of all NH₃ ligands were seceded. Stages II and III are connected with an abruption of the next ²/₆ and ¹/₆ of total NH₃, respectively, and [Mn(NH₃)](NO₃)₂ is formed. The last molecule of NH₃ per formula unit is freed at stage IV together with the simultaneous thermal decomposition of the resulting Mn(NO₃)₂ leading to the formation of gaseous products (O₂, H₂O, N₂ and nitrogen oxides) and solid MnO₂.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Crystal Structure of New One-Dimensional Triple Molybdate Na<Subscript>2</Subscript>K<Subscript>2</Subscript>Cu(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The title compound (disodium dipotassium copper(II) tris-[molybdate (VI)]) is prepared by form melt and characterized by single crystal X-ray diffraction and UV-vis spectroscopy. It crystallizes in the triclinic space group P-1 with a = 7.4946(8) Å, b = 9.3428(9) Å, c = 9.3619(9) Å, α = 92.591(7)°, β = 105.247(9)°, γ = 105.496(9)°, V = 604.7 ų, and Z = 2. Its structure is isotypic with that of Na₄Mn(MoO₄)₃. It is formed by Cu₂O₁₀ distorted bi-octahedral dimers linked by two bridging bidentate Mo₂O₄ tetrahedra and, additionally, two monodentate Mo₁O₄ tetrahedra to form Cu₂Mo₄O₂₀ units. These units are linked by the insertion of Mo₃O₄ tetrahedra to build infinite ribbons disposed along the c axis. All of these ribbons form a one-dimensional framework. Both K1 and K3 cations are located in the inversion center, and all the other atoms are at general positions. The structure model is supported by the bond valence sum (BVS) and charge distribution CHARDI methods. The Cu²⁺ cations adopt the [4+2] CuO₆ Jahn-Teller distortion giving rise to an intense d–d transition in the UV-vis absorption spectra.     

Synthesis and magnetic properties of quasi-unidimensional oxide Sr<Subscript>6.3</Subscript>Rh<Subscript>2.35</Subscript>Mn<Subscript>2.35</Subscript>O<Subscript>15</Subscript>

Attempts of the synthesis in air of complex oxides Sr₃RhMnO_x and Sr₄Rh_1.5Mn_1.5O_x resulted in revealing formation of a new oxide phase Sr_6.3Rh_2.35Mn_2.35O₉ related to quasi-unidimensional family A_3n+3m A′ _n B_3m+n O_9m+6n at n = 1 and m = 1. Its structural characteristics and magnetic properties are studied. X-ray data of the obtained phase is indicated on the basis of trigonal cell (spatial group P321) with the parameters: a 9.6239(4) Å; c ₁ 4.1130(4) Å, c ₂ 2.4946(2) Å. Manganese and rhodium exist in the compound as the cations Mn⁴⁺, Rh³⁺ and Rh⁴⁺, as follows from the data of measuring of magnetic susceptibility in the range 2–300 K.     

Graphene oxide wrapped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au nanostructures as substrates for aptamer-based detection of <Emphasis Type="Italic">Vibrio parahaemolyticus</Emphasis> by surface-enhanced Raman spectroscopy

The authors describe a sensitive surface-enhanced Raman scattering (SERS)-based aptasensor for the detection of the food pathogen Vibrio parahaemolyticus. Nanostructures consisting of Fe₃O₄@Au particles wrapped with graphene oxide (GO) were used both as SERS substrates and separation tools. A first aptamer (apt 1) was immobilized on the Fe₃O₄@Au/GO nanostructures to act as a capture probe via the affinity binding of aptamer and V. parahaemolyticus. A second aptamer (apt-2) was modified with the Raman reporter molecule TAMRA to act as a SERS sensing probes that binds to the target the same way as the Fe₃O₄@Au/GO-apt 1. The sandwich formed between Fe₃O₄@Au/GO-apt 1/V. parahaemolyticus and apt 2-TAMRA can be separated with the aid of a magnet. The concentration of V. parahaemolyticus can be quantified by measurement of the SERS intensity of TAMRA. Under optimal conditions, the signal is linearly related to the V. parahaemolyticus concentration in the range between 1.4 × 10² to 1.4 × 10⁶ cfu·mL^?1, with a detection limit of 14 cfu·mL^?1. Recoveries ranging from 98.5% to 105% are found when analyzing spiked salmon samples. In our perception, the assay described here is a useful tool for quantitation of V. parahaemolyticus in real samples.

Open image in new window

Graphical abstract GO wrapped Fe₃O₄@Au nanostructures were synthesized as the substrate and modified with with a first aptamer (apt 1) to capture V. parahaemolyticus. TAMRA labelled aptamer 2 was then used as signal probe. The V. parahaemolyticus concentrations are closely related to the Raman intensity of TAMRA.

     

Bismuth aluminoborate Bi<Subscript>0.96</Subscript>Al<Subscript>2.37</Subscript>(B<Subscript>4</Subscript>O<Subscript>10</Subscript>)O: Synthesis and crystal structure

The crystal structure of a new bismuth aluminoborate Bi_0.96Al_2.37(B₄O₁₀)O is studied by single-crystal X-ray diffraction. The Bi_0.96Al_2.37(B₄O₁₀)O single crystals are hexagonal (space group \(P\bar 6\) 2m). The unit cell parameters are as follows: a = b = 4.587(4) Å, c = 2.253(9) Å, α = β = 90°, γ = 120°, V = 168.60 ų, Z = 1.     

Refinement of LiFe<Subscript>5</Subscript>O<Subscript>8</Subscript> crystal structure

The crystal structure and the formation conditions of crystals of the LiFe₅O₈ ordered phase obtained from the solution-melt of the Bi₂O₃-Fe₂O₃-B₂O₃-LiCl quadruple system are refined. The crystals are black, octahedral, of cubic symmetry (space group P4₃32). Unit cell parameters: a = 8.3339(1) Å, V = 578.82(1) ų, Z = 4, d _calc = 4.753 g/cm³. From 6046 of the collected array I _hkl 358 are independent (R _int = 0.0321). As a result of anisotropic refinement of structural parameters, R ₁ factor is found to be 0.0186 (wR ₂ = 0.0467). Lithium atoms are in octahedral environment, Li-O is 2.109(1) Å; iron atoms are of two types: in octahedra with Fe-O (by two) distances of 1.9586(9) Å, 2.0152(9) Å, and 2.0652(10) Å and tetrahedra with Fe-O (three) 1.8848(10) Å and 1.914(2) Å. The structure is of inverted spinel type.     

EPR study of the nature of the impurity centers responsible for the scintillation properties of the Li<Subscript>2</Subscript>Zn<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> crystal

The binary molybdate Li₂Zn₂(MoO₄)₃ of a new crystal type was characterized by EPR, optical spectroscopy, and X-ray diffraction methods. The crystals have the Pnma symmetry group and the lattice parameters a = 5.1139(5) Å, b = 10.4926(13) Å, c = 17.6445(22) Å; Z = 4. The crystals possess scintillation properties; emission is caused by the presence of impurity levels in the forbidden band. The EPR studies of the nature of the impurity centers responsible for the scintillation characteristics of the crystal showed that the centers were Cu²⁺ ions substituted for zinc ions in the oxygen octahedra. The directions of the main values of the g and tensors (g _zz , A _zz ) correspond to the direction of O-Cu-O of the oxygen octahedron distorted along the Z axis. The EPR spectra of the copper ions are described by the spin Hamiltonian with the parameters g _‖ = 2.38, g _⊥ = 2.06; A _‖ = 116 G, A _⊥ = 0 G.     

Molecular mechanism of propane oxidative dehydrogenation on surface oxygen radical sites of VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/TiO<Subscript>2</Subscript> catalysts

Minimum energy pathways of propane oxidative dehydrogenation to propene and propanol on supported vanadium oxide catalyst VO _x /TiO₂ were studied by periodic discrete Fourier transform (DFT) using a surface oxygen radical as the active site. The propene formation pathway was shown to consist of two consecutive hydrogen abstraction steps. The first step includes C_β–H bond activation of propane followed by the formation of a surface hydroxyl group V–O _t H and a propyl radical n-C₃H₇. This step with the activation energy E* = 0.56 eV (54.1 kJ/mol) appears to be rate-determining. The second step involves the reaction of the bridging O _b oxygen atom with the methylene C–H bond of propyl radical n-C₃H₇ followed by the formation of a hydroxylated surface site HO _t –V⁴⁺–O _b H and propene. The initial steps of the C–H bond activation during propane conversion to propanol and propene by ODH on V⁵⁺–(O _t O _b )^? active sites are identical. The obtained results demonstrate that participation of surface oxygen radicals as the active sites of propane ODH makes it possible to explain relatively low activation energies observed for this reaction on the most active catalysts. The presence of very active radical species in low concentration seems to be the key factor for obtaining high selectivity.     

Synthesis and X-ray investigation of Rb<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>] and Cs<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>]

Powder and single crystal X-ray diffraction studies have been performed for anhydrous nitrate complexes Rb₂[Pd(NO₃)₄] (I) and Cs₂[Pd(NO₃)₄] (II). Crystal data for I: a = 7.843(1) Å, b = 7.970(1) Å, c = 9.725(1) Å; β = 100.39(1)°, V = 597.9(1) Å ³, space group P2₁/c, Z = 2, d _calc = 2.918 g/cm³; for II: a = 10.309(2) Å, b = 10.426(2) Å, c = 11.839(2) Å; β = 108.17(3)°, V = 1209.0(4) ų, space group P2₁/c, Z = 4, d ^calc = 3.408 g/cm³. The structures are formed by isolated [Pd(NO₃)₄]^2? complex anions and alkali metal cations. The plane-square environment of the Pd atom is formed from the oxygen atoms of the monodentate nitrate groups. The geometrical characteristics of the complex anions are analyzed. Compound II has a short contact Pd...Cs 3.252 Å.     

Structure and some properties of [UO<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)(C<Subscript>5</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)]

The complex [UO₂(SeO₄)(C₅H₁₂N₂O)₂(H₂O)] (I) was synthesized and studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are orthorhombic: a = 13.1661(3) Å, b = 16.4420(5) Å, c = 17.4548(6) Å, Pbca, Z = 8, R = 0.0423. The structural units of crystal I are chains with the composition coinciding with that of the compounds of the AB₂M ₃ ¹ crystal chemical group of the uranyl complexes (A = UO ₂ ²⁺ , B² = SeO ₄ ^2? , M¹ = C₅H₁₂N₂O and H₂O).     

Palladium clusters Pd<Subscript>4</Subscript>(SR)<Subscript>4</Subscript>(OAc)<Subscript>4</Subscript> and Pd<Subscript>6</Subscript>(SR)<Subscript>12</Subscript> (R = Bu,Ph): Structure and properties

The structures of the Pd₄(SBu)₄(OAc)₄ (I) and Pd₆ (SBu)₁₂ (II) palladium clusters are determined by the X-ray diffraction method. For cluster I: a = 8.650(2), b = 12.314(2), c = 17.659(4) Å, α = 78.03(3)°, β = 86.71(2)°, γ = 78.13(3)°, V = 1800.8(7) ų, ρcalcd = 1.878 g/cm³, space group P \(\bar 1\), Z = 4, N = 3403, R = 0.0468; for structure II: a = 10.748(2), b = 12.840(3), c = 15.233(3) Å, α = 65.31(3)°, β = 70.10(3)°, γ = 72.91(3)°, V = 1767.4(6) ų, ρ calcd = 1.605 g/cm³, space group P \(\bar 1\), Z = 1, N = 3498, R = 0.0729. In cluster I, four Pd atoms form a planar cycle. The neighboring Pd atoms are bound by two acetate or two mercaptide bridges (Pd…Pd 2.95–3.23 Å, Pd…Pd angles 87.15°–92.85°). In cluster II, the Pd atoms form a planar six-membered cycle with Pd···Pd distances of 3.09–3.14 Å, the PdPdPd angles being 118.95°–120.80°. The Pd atoms are linked in pairs by two mercaptide bridges. The formation of clusters I and II in solution is proved by IR spectroscopy and calorimetry. Analogous clusters are formed in solution upon the reaction of palladium(II) diacetate with thiophenol.