酚类在芳烃溶剂中的缔合溶液热力学

用凝固点降低法测量了对甲酚、间甲酚、邻甲酚、2,4-二甲酚、2,6-二甲酚以及对甲酚+间甲酚、对甲酚+邻甲酚、间甲酚+邻甲酚、2,4-二甲酚+2,6-二甲酚的1:1摩尔比混合物等为溶质, 溶剂为苯或对二甲苯的活度系数, 用Wiehe-Bagley型的连续缔合模型对数据进行了处理, 得到了各种酚的自缔合常效K_A. 在同一溶剂中, K_A依下列顺序减小: 对甲酚>间甲酚>邻甲酚; 2,4-二甲酚>2,6-二甲酚. 各混合酚的表观K_A 介于两种纯酚的K_A之间.     

Phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol in the presence of either 2,4,6-trimethylphenol or 4-tert-butyl-2,6-dimethylphenol

The synthesis of poly(2,6-dimethyl-1,4-phenylene oxide) with one 2,6-dimethylphenol chain end (PPO–OH) and with well-defined molecular weight by phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol ( 20 ) in the presence of either 2,4,6-trimethylphenol ( 1 ) or 4-t-butyl-2,6-dimethylphenol ( 1 ′) as chain initiators is described. The range of controllable molecular weights and the mechanism of molecular weight control are discussed based on the differences between the reactivities of 20 , 1 , and 1 ′ and of the corresponding reactive species. The PPO–OH synthesized from 20 / 1 ′ has structural units derived from 1 ′ attached only at the chain end. PPO–OH synthesized from 20 / 1 contains structural units derived from 1 both internally and at the chain ends. Structural units derived from side reactions were identified by ¹H-NMR spectroscopy. A reaction mechanism is proposed to account for their formation.     

Lactamomethylation of alkylphenols: Synthesis and quantum-chemical study of the reaction pathway

Six novel lactamomethyl derivatives of 2,5-dimethylphenol and 2,3,5-trimethylphenol were prepared with moderate yields by the reaction of corresponding phenols with 1-(hydroxymethyl)lactams in the presence of an acid catalyst. In all cases, the substitution occurred at position 4 to the phenolic hydroxyl group. The structures of all synthesized compounds were confirmed by FT-IR, ¹H and ¹³C NMR, 2D NMR and elemental analysis. The selectivity and possible pathways of the lactamomethylation reaction were studied by quantum-chemical methods. In silico calculations showed that the substitution at para-position to the hydroxyl group of the corresponding phenols was more preferable due to the higher stability of forming intermediates.     

Synthesis and analytical properties of a novel columnar metallomesogenic polymer

A metallomesogenic side-chain polymer with copper carboxylato discotic units in stacks prepared by covalent bonding of 14-pentadecenoic acid, stearic acid and poly(methylhydrosiloxane) is described. The physico-chemical and thermal properties of both monomeric and polymeric metallomesogens were determined by elemental analysis, IR, polarizing optical microscopy, thermal gravimetric analysis and differential scanning calorimetry. The polymeric states showed a discotic lamellar phase at 50-95 degrees C and an ordered discotic hexagonal phase at 95-200 degrees C. By dynamic coating, the metallomesogenic polymer was crosslinked to the capillary wall via benzoyl peroxide. The wall-coated capillary columns (15 m x 0.25 mm I.D.) were used for the separation of phenols. Factors affecting the retention and the sample selectivity were examined. Van 't Hoff plots as a function of temperature indicated that phase transitions were occurring. Thermodynamic properties of the analytes in this system were also studied. For the determination of a mixture of 3-aminophenol, 2-chlorophenol, 2-nitrophenol, 4-nitrophenol, o-methylphenol, m-methylphenol, p-methylphenol, 2,4-dichlorophenol, 2,4-dimethylphenol, 2,4-dinitrophenol, 2,4,6-trichlorophenol, 2,4,6-trimethylphenol, 4-bromophenol, 3-methyl-4-chlorophenol, pentachlorophenol, and unsubstituted phenol, the calibration graphs for most phenols were linear over the range of 10-1000 microg ml(-1) and the mass detection limits were in the ng range based on three times standard deviation of seven measurements of the lowest peak that could be detected.     

HO2 formation from the OH + benzene reaction in the presence of O2

In this study we investigated the secondary formation of HO(2) following the benzene + OH reaction in N(2) with variable O(2) content at atmospheric pressure and room temperature in the absence of NO. After pulsed formation of OH, HO(x) (= OH + HO(2)) and OH decay curves were measured by means of a laser-induced fluorescence technique (LIF). In synthetic air the total HO(2) yield was determined to be 0.69 ± 0.10 by comparison to results obtained with CO as a reference compound. HO(2) is expected to be a direct product of the reaction of the intermediately formed OH-benzene adduct with O(2). The HO(2) yield is slightly greater than the currently recommended yield of the proposed HO(2) co-product phenol (～53%). This hints towards other, minor HO(2) forming channels in the absence of NO, e.g. the formation of epoxide species that was proposed in the literature. For other test compounds upper limits of HO(2) yields of 0.10 (isoprene) and 0.05 (cyclohexane) were obtained, respectively. In further experiments at low O(2) concentrations (0.06-0.14% in N(2)) rate constants of (2.4 ± 1.1) × 10(-16) cm(3) s(-1) and (5.6 ± 1.1) × 10(-12) cm(3) s(-1) were estimated for the OH-benzene adduct reactions with O(2) and O(3), respectively. The rate constant of the unimolecular dissociation of the adduct back to benzene + OH was determined to be (3.9 ± 1.3) s(-1). The HO(2) yield at low O(2) was similar to that found in synthetic air, independent of O(2) and O(3) concentrations indicating comparable HO(2) yields for the adduct + O(2) and adduct + O(3) reactions.     

Zur Chemie des 4-Hydroxy-cumarins

Zusammenfassung Malonsäure-bis-(2,6-dimethylphenol)-ester I reagiert in einer Schmelze von NaCl–AlCl₃ zu 4-Hydroxy-6,8-dimethyl-cumarin II. Zum gleichen Produkt führt die Cyclisierung des isomeren Malonsäure-bis-(2,4-dimethylphenol)-esters VI. Bemerkenswert ist der Unterschied in den Ausbeuten (84%44,7%), welche Tatsache für einen aktivierenden Einfluß der o-ständigen CH₃-Gruppen spricht. Analog verhält sich auch der Malonsäure-bis-(2,4,6-trimethylphenol)-ester.     

Use of polymeric sorbents for the off-line preconcentration of priority pollutant phenols from water for high-performance liquid chromatographic analysis

The use of porous polymeric minicolumns for the determination of phenols from the U.S. Environmental Priority Pollutant List was studied. For the off-line preconcentration of priority pollutant phenols from water by solid-phase extraction, minicolumns packed with 1,4-di(methacryloyloxymethyl)naphthalene-divinylbenzene copolymer and Amberlite XAD-4 were used. In order to compare the sorption properties of these polymeric sorbents, the recoveries and breakthrough volumes of phenol, p-nitrophenol, 2,4-dinitrophenol, o-chlorophenol, o-nitrophenol, 2,4-dimethylphenol, 4-chloro-m-cresol, 4,6-dinitro-o-cresol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol were studied.     

Aerobic oxidation of substituted phenols catalysed by metal acetylacetonates in the presence of 3-methylbutanal

The aerobic oxidation of substituted phenols with the catalytic system M(acac)_n/3-methylbutanal/O₂ has been investigated. Co(acac)₂ and Mn(acac)₃ promoted the transformation of 2,6-dimethylphenol and 2,6-di-t-butylphenol into their corresponding diphenoquinones and benzoquinones. In the oxidation of 2,3,6-trimethylphenol, the same catalysts yielded 32–34% of the relevant biphenol. Cu(acac)₂ converted 2-naphthol into 1,1′-bi-2-naphthol with 84% yield. Supported Co(II) and Cu(II) complexes have also been used as heterogeneous catalysts for the oxidation of 2,6-di-t-butylphenol and 2-naphthol, respectively.     

Total radical yields from tropospheric ethene ozonolysis

The gas-phase reactions of ozone with alkenes can be significant sources of free radicals (OH, HO(2) and RO(2)) in the Earth's atmosphere. In this study the total radical production and degradation products from ethene ozonolysis have been measured, under conditions relevant to the troposphere, during a series of detailed simulation chamber experiments. Experiments were carried out in the European photoreactor EUPHORE (Valencia, Spain), utilising various instrumentation including a chemical-ionisation-reaction time-of-flight mass-spectrometer (CIR-TOF-MS) measuring volatile organic compounds/oxygenated volatile organic compounds (VOCs/OVOCs), a laser induced fluorescence (LIF) system for measuring HO(2) radical products and a peroxy radical chemical amplification (PERCA) instrument measuring HO(2) + ΣRO(2). The ethene + ozone reaction system was investigated with and without an OH radical scavenger, in order to suppress side reactions. Radical concentrations were measured under dry and humid conditions and interpreted through detailed chemical chamber box modelling, incorporating the Master Chemical Mechanism (MCMv3.1) degradation scheme for ethene, which was updated to include a more explicit representation of the ethene-ozone reaction mechanism.The rate coefficient for the ethene + ozone reaction was measured to be (1.45 ± 0.25) × 10(-18) cm(3) molecules(-1) s(-1) at 298 K, and a stabilised Criegee intermediate yield of 0.54 ± 0.12 was determined from excess CO scavenger experiments. An OH radical yield of 0.17 ± 0.09 was determined using a cyclohexane scavenger approach, by monitoring the formation of the OH-initiated cyclohexane oxidation products and HO(2). The results highlight the importance of knowing the [HO(2)] (particularly under alkene limited conditions and high [O(3)]) and scavenger chemistry when deriving radical yields. An averaged HO(2) yield of 0.27 ± 0.07 was determined by LIF/model fitting. The observed yields are interpreted in terms of branching ratios for each channel within the postulated ethene ozonolysis mechanism.     

Copper(II)-catalyzed reactions of activated aromatics

The catalytic reaction of cis-bisglycinato copper(II) monohydrate in the presence of hydrogen peroxide leads to hydroxylation of phenol to give catechol and hydroquinone (1:1.2 ratio) in good yield. 2,6-Dimethylphenol can be hydroxylated by hydrogen peroxide and a catalytic amount of cis-bisglycinato copper(II) monohydrate to give an aggregate of 1,4-dihydroxy-2,6-dimethylbenzene and 2,6-dimethylphenol. A similar reaction of o-cresol gives 2,5-dihydroxytoluene. The reactivity of cis-bisglycinato copper(II) monohydrate in hydrogen peroxide with o-cresol is 4.5 times faster than that of a similar reaction by trans-bisglycinato copper(II) monohydrate. A catalytic reaction of cis-bisglycinato copper(II) monohydrate with aniline in aqueous hydrogen peroxide gives polyanilines in the form of pernigraniline with different amounts of Cu(OH)2 attached to them. The two major components of polyanilines obtained have Mn values of 1040 and 1500, respectively. Resistance of films of these polyanilines increases with temperatures from 40 degrees C to a maximum value at 103 degrees C and then decreases in the region of 103-150 degrees C, showing the property of a thermolectric switch. The aggregate prepared from hydroxylation of 2,6-dimethylphenol shows a similar property in the region of 30-180 degrees C.     

Methylphenols removal from water by low-cost adsorbents

A comparative study on the adsorption of methylphenols on adsorbents prepared from several industrial wastes has been carried out. The results show that extent of adsorption on carbonaceous adsorbent prepared from fertilizer industry waste has been found to be 37.3, 40.5, 65.9, and 88.5 mg/g for 2-methylphenol, 4-methylphenol, 2,4-dimethylphenol, and 2,4,6-trimethylphenol, rspectively. As compared to carbonaceous adsorbent, the other three adsorbents viz. blast furnace sludge, dust, and slag adsorb methylphenols to a much smaller extent. This has been accounted for due to the carbonaceous adsorbent having a larger porosity and consequently higher surface area. The adsorption of phenols on this carbonaceous adsorbent as a function of contact time, concentration, and temperature has been studied by the batch method. The adsorption has been found to be endothermic and data conform to the Langmuir equation. The analysis of data indicates that adsorption is a first-order process and pore diffusion-controlled. The efficiency of the carbonaceous adsorbent was assessed by comparing the results with those on a standard activated charcoal sample. It was found that the carbonaceous adsorbent is about 45% as efficient as standard activated charcoal and can therefore be employed for the removal of methylphenols from wastewaters.     

Formation of phenol and carbonyls from the atmospheric reaction of OH radicals with benzene

The gas-phase reaction of OH radicals with benzene has been studied in a flow tube operated at 295 +/- 2 K and 950 mbar of synthetic air or O2. Ozonolysis of tetramethylethylene (dark reaction) with a measured OH radical yield of 0.92 +/- 0.08 or photolysis of methyl nitrite in the presence of NO served as the OH sources. For investigations in the presence of NOx, the conditions were chosen so that more than 95% of the OH/benzene adduct reacted with O2 even for the highest NO2 concentration occurring in the experiment. In the absence of NOx, a phenol yield from the reaction of OH radicals with benzene of 0.61 +/- 0.07 was measured by means of long-path FT-IR and UV spectroscopy over a wide range of experimental conditions. This yield was confirmed by measurements performed in the presence of NOx. Detected carbonyls were glyoxal, cis-butenedial and trans-butenedial with formation yields of 0.29 +/- 0.10, 0.08 +/- 0.03 and 0.023 +/- 0.007, respectively, measured in synthetic air and in the presence of NOx. There was no significant difference in the product yields applying both experimental approaches for OH generation (dark reaction or photolysis). Nitrobenzene and o-nitrophenol were detected in traces. The yield of nitrobenzene increased with increasing NOx resulting in a maximum formation yield of 0.007. The detected products in the presence of NOx account for approximately 78% of the reacted carbon. Butenedial yields from benzene degradation are reported for the first time. In the absence of NOx, glyoxal, cis-butenedial and trans-butenedial were also detected, but with distinctly lower yields compared to the experiments with NOx.     

2个含呫吨结构双酚化合物的合成

以呫吨酮为原料,经二氯亚砜氯化得到9,9-二氯呫吨中间体,无需分离纯化,将其分别与邻甲酚和2,6-二甲基苯酚进行取代反应,制得2个含呫吨结构的双酚化合物9,9-二(4-羟基-3-甲基苯基)呫吨和9,9-二(4-羟基-3,5-二甲基苯基) 呫吨,产率分别为81.0%和80.5%。 用FTIR、1H NMR、13C NMR和元素分析对其组成和结构进行了表征。 该法具有操作简单、反应条件温和及收率高等优点。     

Optimized intermolecular potential for aromatic hydrocarbons based on anisotropic united atoms. III. Polyaromatic and naphthenoaromatic hydrocarbons

In this third article of the series, a new anisotropic united atoms (AUA) intermolecular potential parameter set has been proposed for the carbon force centers connecting the aromatic rings of polyaromatic hydrocarbons to predict thermodynamic properties using both the Gibbs ensemble and NPT Monte Carlo simulations. The model uses the same parameters as previous AUA models used for the aromatic CH force centers. The optimization procedure is based on the minimization of a dimensionless error criterion incorporating various thermodynamic data of naphthalene at 400 and 550 K. The new model has been evaluated on a series of polyaromatic and naphthenoaromatic hydrocarbons over a wide range of temperatures up to near-critical conditions. Vaporization enthalpy, liquid density, and normal boiling temperature are reproduced with good accuracy. The new potential parameters have also been tested successfully on toluene, 1,3,5-trimethylbenzene, styrene, m-xylene, n-hexylbenzene, and n-dodecylbenzene to demonstrate their transferability to alkylbenzenes.     

Thermal decomposition of 4,4′-isopropylidene bis-2,6-dibromophenol (tetrabromobisphenol-A)

The thermal decomposition of tetrabromobisphenol-A (TBBPA) was found to proceed via an autocatalytic free-radical process. The major products of the decomposition are HBr; mono-, di- and tribromobisphenol-A; phenol; mono-, di-, and tribromophenol; and eventually, char. It was generally found that o- and p-halophenols are thermally unstable. In contrast, the m-bromophenol, 3,5-dibromo-2,4,6-trimethylphenol (dibromomesitol) was found to be quite stable. In addition, o- and p-halo-substituted phenols were found to react with LiI at 250°C to produce I₂, while m-halophenols did not. These results are explained by the formation from o- and p-halo-substituted phenols of a reactive halocyclohexadienone.     

The 1,2,4-triazolyl cation: thermolytic and photolytic studies

The generation of the 1,2,4-triazolyl cation (1) has been attempted by the thermolysis and photolysis of 1-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridinium tetrafluoroborate (2) and the thermolysis of 1- and 4-diazonium-1,2,4-triazoles, using mainly mesitylene as the trapping agent. Thermolysis of 2 gave mostly 1,2,4-triazole, together with 3-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridine, 4-(1,2,4-triazol-4-ylmethyl)-2,6-dimethylpyridine, and 4-(2,4,6-trimethylbenzyl)-2,6-dimethylpyridine. Thermolysis of each of the diazonium salts in the presence of mesitylene again gave mainly triazole together with very low yields of 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene and the corresponding -4-yl isomer in about the same ratio. On the other hand, photolysis of 2 in mesitylene gave mainly 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene. A photoinduced electron transfer from mesitylene to 2 has been observed and preliminary laser flash photolyses of 2 and the corresponding 2,4,6-triphenylpyridinium salt have been carried out. The observed transients are explained as arising from the first excited states of the pyridinium salts rather than from 1. Ab initio MO calculations are reported and indicate that the predicted electronic ground-state of the triazolyl cation is a triplet state of B1 symmetry with five pi electrons, which corresponds to a diradical cation (1c). Possible mechanisms for the formation of the various products are proposed.     

Heterogeneous catalytic aerobic oxidation behavior of Co–Na heterodinuclear polymeric complex of Salen-crown ether

A new kind of Co–Na heterodinuclear polymer complex based on Salen Schiff base and crown ether has been successfully prepared by condensation polymerization. Its catalytic behavior for aerobic oxidation of cyclohexene, alkylbenzenes and linear aliphatic olefins was studied in the absence of any solvents or reducing agents under mild conditions. The oxidation of cyclohexene catalyzed by the above catalyst proved to be a simple and efficient method for obtaining 2-cyclohexen-1-one (CO) and 2-cyclohexen-ol (OH) in a high selectivity. Kinetics of the oxidation was also investigated. The results showed that the aerobic oxidation of cyclohexene catalyzed by Salen-crown ether heterodinuclear polymer complex follows a radical chain aerobic oxidation mechanism. This oxidation system is also efficient in the oxidation of alkylbenzenes and linear aliphatic olefins, which afforded corresponding benzylic oxidation products and epoxides, respectively.     

Branching ratios for the reaction of selected carbonyl-containing peroxy radicals with hydroperoxy radicals

An important chemical sink for organic peroxy radicals (RO(2)) in the troposphere is reaction with hydroperoxy radicals (HO(2)). Although this reaction is typically assumed to form hydroperoxides as the major products (R1a), acetyl peroxy radicals and acetonyl peroxy radicals have been shown to undergo other reactions (R1b) and (R1c) with substantial branching ratios: RO(2) + HO(2) → ROOH + O(2) (R1a), RO(2) + HO(2) → ROH + O(3) (R1b), RO(2) + HO(2) → RO + OH + O(2) (R1c). Theoretical work suggests that reactions (R1b) and (R1c) may be a general feature of acyl peroxy and α-carbonyl peroxy radicals. In this work, branching ratios for R1a-R1c were derived for six carbonyl-containing peroxy radicals: C(2)H(5)C(O)O(2), C(3)H(7)C(O)O(2), CH(3)C(O)CH(2)O(2), CH(3)C(O)CH(O(2))CH(3), CH(2)ClCH(O(2))C(O)CH(3), and CH(2)ClC(CH(3))(O(2))CHO. Branching ratios for reactions of Cl-atoms with butanal, butanone, methacrolein, and methyl vinyl ketone were also measured as a part of this work. Product yields were determined using a combination of long path Fourier transform infrared spectroscopy, high performance liquid chromatography with fluorescence detection, gas chromatography with flame ionization detection, and gas chromatography-mass spectrometry. The following branching ratios were determined: C(2)H(5)C(O)O(2), Y(R1a) = 0.35 ± 0.1, Y(R1b) = 0.25 ± 0.1, and Y(R1c) = 0.4 ± 0.1; C(3)H(7)C(O)O(2), Y(R1a) = 0.24 ± 0.15, Y(R1b) = 0.29 ± 0.1, and Y(R1c) = 0.47 ± 0.15; CH(3)C(O)CH(2)O(2), Y(R1a) = 0.75 ± 0.13, Y(R1b) = 0, and Y(R1c) = 0.25 ± 0.13; CH(3)C(O)CH(O(2))CH(3), Y(R1a) = 0.42 ± 0.1, Y(R1b) = 0, and Y(R1c) = 0.58 ± 0.1; CH(2)ClC(CH(3))(O(2))CHO, Y(R1a) = 0.2 ± 0.2, Y(R1b) = 0, and Y(R1c) = 0.8 ± 0.2; and CH(2)ClCH(O(2))C(O)CH(3), Y(R1a) = 0.2 ± 0.1, Y(R1b) = 0, and Y(R1c) = 0.8 ± 0.2. The results give insights into possible mechanisms for cycling of OH radicals in the atmosphere.     

超高效液相色谱-串联质谱法测定食品包装纸中的酚类化合物

建立了食品包装纸中2,4,6-三氯酚、五氯酚、4-氯-3,5-二甲基-苯酚和4-叔-辛基酚的超高效液相色谱-串联质谱(UPLC-MS/MS)分析方法。样品经丙酮超声萃取,Oasis HLB固相柱净化后,用Waters AC-QUITY UPLC C18柱以乙腈和0.05%氨水为流动相进行分离,以负离子模式离子化,在多离子反应监测(MRM)模式下定量检测。在优化实验条件下,2,4,6-三氯酚的线性范围为20~1 000μg.L-1,五氯酚、4-氯-3,5-二甲基-苯酚和4-叔-辛基酚的线性范围为5~1 000μg.L-1,相关系数均大于0.997。4种酚类化合物的检出限为1~10μg.kg-1,定量下限为5~20μg.kg-1,加标回收率为75%~109%,相对标准偏差均不高于12.5%。该方法灵敏度高、操作简单,可用于食品包装纸中酚类化合物含量的快速检测。     

An efficient and facile one-pot synthesis of structurally unique 2,4,6-tris(arylchalcogeno)-1,3,5-triazine and 1,3,5-tris(arylchalcogeno)-2,4,6-trimethylbenzene

An efficient one-pot synthesis of a novel class of 2,4,6-tris(arylchalcogeno)-1,3,5-triazine (sulfur, selenium and tellurium) and 1,3,5-tris(arylchalcogeno)-2,4,6-trimethylbenzene (sulfur and selenium)-containing ligands has been developed based on the reaction of 2,4,6-trichloro-1,3,5-triazine and 1,3,5-tris(bromomethyl)-2,4,6-trimethylbenzene with the corresponding arylchalcogenide anions generated in aqueous tetrahydrofuran.