Preparation of PVDF Microfiltration Membranes with Thermo-responsive PNIPAM Hydrogel Composite Particles

Silica-core composite particles with poly(N-isopropylacrylamide) (PNIPAM) hydrogel-shell were prepared by using silica microparticle templates, which were modified with [3-(methacryloxy)propyl]trimethoxysilane (MPS). The thermo-responsive PNIPAM hydrogel microcapsules were prepared by soaking the core–shell composite particles in hydrofluoric acid solution. These hydrophilic PNIPAM hydrogel microcapsules were applied to poly(vinylidene fluoride) (PVDF) microfiltration membranes in order to control the hydrophobicity of membrane surface without sacrificing the permeability. PVDF/PNIPAM hydrogel composite membranes were made by phase inversion and diffusion in the mixed solvents of N-methyl-2-pyrrolidone (NMP) and ethylene glycol monomethyl ether (EGME) with polyethylene glycol 600 (PEG 600) as plasticizer.     

Preparation of hydrogels via ultrasonic polymerization

Several acrylic hydrogels were prepared via ultrasonic polymerization of water soluble monomers and macromonomers. Ultrasound was used to create initiating radicals in viscous aqueous monomer solutions using the additives glycerol, sorbitol or glucose in an open system at 37 °C. The water soluble additives were essential for the hydrogel production, glycerol being the most effective. Hydrogels were prepared from the monomers 2-hydroxyethyl methacrylate, poly(ethylene glycol) dimethacrylate, dextran methacrylate, acrylic acid/ethylene glycol dimethacrylate and acrylamide/bis-acrylamide. For example a 5% w/w solution of dextran methacrylate formed a hydrogel in 6.5 min in a 70% w/w solution of glycerol in water at 37° C with 20 kHz ultrasound, 56 W cm^?2. The ultrasonic polymerization method described here has a wide range of applications such a biomaterial synthesis where initiators are not desired.     

Synthesis and characterization of polymeric nanospheres loaded with the anticancer drug paclitaxel and magnetic particles

We describe the preparation (by nanoprecipitation) and characterization of nanospheres (NPs) for magnetic drug targeting made of a magnetic fluid with poly(ethylene glycol), poly(d,l-lactic-co-glycolic acid) (PLGA), and the anticancer drug paclitaxel (Taxol^®). Infrared spectroscopy confirmed the incorporation of the drug in the PLGA NPs, which were also characterized in terms of morphology, size (typical diameter 200-250 nm) and colloidal stability in aqueous solutions of NaCl. Drug release and in vivo toxicity experiments of the prepared samples were performed. Their stability, magnetic properties (superparamagnetism), and lethal dose were found to be acceptable for the proposed application in cancer therapy.     

Stably dispersible P3HT/ZnO nanocomposites with tunable luminescence by in-situ hydrolysis and copolymerization of zinc methacrylate

In this paper, the copolymer shell with the internal hydrophobic polymethacrylate layer and the external hydrophilic poly(ethylene glycol) methyl ether groups was successfully bonded on the surface of ZnO nanocrystals through a simple sol–gel method, i.e., radical polymerization of zinc methacrylate (Zn(MA)₂) and poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and hydrolysis. The prepared ZnO@poly(methacrylate-co-poly(ethylene glycol) methyl ether methacrylate) (ZnO@PPEGMA) nanocrystals showed good dispersion and smaller particle size, due to the presence of copolymer shell. The optical properties of ZnO@PPEGMA nanocrystals were characterized by ultraviolet–visible (UV–vis) spectroscopy and photoluminescence (PL) spectroscopy. The results indicated that the absorption edge and PL emission in the UV region of ZnO@PPEGMA nanocrystals appeared obvious blue-shift, due to the smaller particle size. Incorporation of ZnO@PPEGMA nanocrystals into poly(3-hexylthiophene) (P3HT) matrix, the dispersion of P3HT/ZnO@PPEGMA nanocomposites was greatly improved and the nanocomposites possessed excellent photoluminescence stability. Meanwhile, it was observed that the PL emission of P3HT/ZnO@PPEGMA nanocomposites was enhanced significantly, due to the presence of copolymer shell and the improvement of compatibility of ZnO@PPEGMA in the P3HT matrix. The results showed that the P3HT/ZnO@PPEGMA nanocomposites could be potential candidates for optical applications.     

Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) film

A series of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) composite thin films with prescribed concentrations of poly(ethylene glycol) were prepared. The PEDOT–PSS pristine film and PEDOT–PSS/PEG films were studied using four-probe method, photoelectron spectroscopy and atomic force microscopy. The electrical conductivity of PEDOT–PSS/PEG hybrid films was found to be enhanced compared to the PEDOT–PSS pristine film, depending on the PEG concentration and molecular weight. XPS analysis and AFM results showed that PEG induces the phase separation between the PEDOT–PSS conducting particles and the excessive PSSNa shell. Simultaneously PEG may form hydrogen bond with sulfonic groups of PSSH, and hence weaken the electrostatic interactions between PEDOT cationic chains and PSS anionic chains. These resulted in the creation of a better conduction pathway among PEDOT–PSS particles, attributed to the improvement of conductivity.     

Synthesis and characterization of wire-like and near-spherical Eu2O3-doped Y2O3 phosphors by solvothermal reaction

Eu₂O₃-doped yttrium oxide (3 mol%) [Y₂O₃:Eu(3 mol%)] with wire-like and near-spherical morphologies were prepared by a solvothermal treatment using water, ethanol, ethylene glycol and glycerol as reaction media followed by calcination. The powders prepared in water and ethanol possessed wire structure, where the powder treated in water showed high aspect ratio and that in ethanol showed low aspect ratio. The powders prepared in ethylene glycol and glycerol possessed well-dispersed near-spherical powders, which showed almost the same level of photoluminescence emission intensity as that of submicron particles prepared without solvothermal treatment.     

One-step copolymerization modified magnetic nanoparticles via surface chain transfer free radical polymerization

Copolymer brushes growing onto magnetic nanoparticles were prepared by surface chain transfer free radical polymerization. Block copolymer brushes (P(PEGMA)-co-PNIPAAm) consist of poly(ethylene glycol) monomethacrylate (PEGMA) and N-isopropylacrylamide monomer. X-ray photoelectron spectroscopy (XPS) characterized the chemical composition of copolymer. Thermogravimetric analysis (TGA) suggested that the amount of copolymer on magnetic nanoparticles decreased with increasing azodiisobutyronitrile (AIBN). The saturation magnetization decreased significantly with increasing P(PEGMA)-co-PNIPAAm. The thermosensitive point is about 43 °C for magnetic nanoparticles with 33.8% P(PEGMA)-co-PNIPAAm.     

有序TiO2纳米管阵列结构的可控生长及其物相研究

分别在HF水溶液、含NH₄F和H₂O的乙二醇有机溶液中对Ti箔进行阳极氧化,得到TiO₂纳米管阵列结构.该结构高度有序、分布均匀、垂直取向,且通过阳极氧化工艺条件(如阳极氧化电压、电解液的选择与配比以及氧化时间等)可实现对其结构参数(如管径、管壁厚度、管密度、管长等)的有效控制.利用XRD研究了TiO₂纳米管阵列的物相结构.结果表明：退火前的TiO₂纳米管阵列为无定形结构;分别在真空和氧气氛中50 关键词： 2纳米管阵列')" href="#">TiO₂纳米管阵列 阳极氧化 可控生长     

A facile method to synthesize magnetic polymer nanospheres with multifunctional groups

Magnetic poly(styrene methyl methacrylate)/Fe₃O₄ nanospheres with ester groups were prepared by a modified one-step mini-emulsion polymerization in the presence of Fe₃O₄ ferrofluids. The effects of monomer dose, surfactant content, ferrofluid concentration and initiator content on the particle characteristics such as the size, morphology and magnetic properties were investigated by Fourier-transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometer. The results indicated that magnetic nanospheres were superparamagnetic with high saturation magnetization of 51.0 emu/g and corresponding magnetite content of 61.5 wt%. Subsequently, magnetic nanospheres with carboxyl and amino groups were also obtained by hydrolysis and ammonolysis reaction. These magnetic nanospheres with multifunctional groups have biomedical applications.     

A ToF-SIMS and XPS study of protein adsorption and cell attachment across PEG-like plasma polymer films with lateral compositional gradients

In this work we report a detailed X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) study of poly(ethylene glycol) PEG-like chemical gradients deposited via plasma enhanced chemical vapour deposition (PECVD) at two different load powers using diethylene glycol dimethyl ether (DG) as a monomer. Principal component analysis (PCA) was applied to the ToF-SIMS data both before and after protein adsorption on the plasma polymer thin films. Results of the PCA loadings indicated a higher content of hydrocarbon fragments across the higher load power gradient, which adsorbed higher amounts of proteins. Gradients deposited at a lower load power retained a higher degree of monomer like functionality as did the central region directly underneath the knife edge electrode. Analysis of the adsorption of serum proteins (human serum albumin and fetal bovine serum) was monitored across the gradient films and increased with decreasing ether (PEG-like) film chemistries. The effect of protein incubation time on the levels adsorbed fetal bovine serum on the plasma polymer films was critical, with significantly more protein adsorbing after 24 hour incubation times on both gradient films. The attachment of HeLa cells on the gradients appeared to be dictated not only by the surface chemistry, but also by the adsorption of serum proteins. XPS analysis revealed that at surface ether concentrations of less than 70% in the gradient films, significant increases in protein and cell attachment were observed.     

Synthesis and luminescent properties of PEO/lanthanide oxide nanoparticle hybrid films

In this study, we investigate the optical properties of lanthanide oxide nanoparticles dispersed in poly(ethylene oxide) (PEO) network as thermally stable polymeric films. The aim of this work is both to keep a good optical transparency in the visible domain and to obtain luminescent materials after incorporation of nanoparticles. For this purpose, we develop luminescent nanocrystals of oxides containing terbium ion as a doping element in Gd₂O₃. These sub-5-nm lanthanide oxides nanoparticles have been prepared by direct oxide precipitation in high-boiling polyalcohol solutions and characterized by luminescence spectroscopy. PEO/lanthanide oxide nanohybrid films are prepared by radical polymerization of poly(ethylene glycol) methacrylate after introduction of lanthanide oxide particles.As a first result; the obtained films present interesting luminescence properties with a very low lanthanide oxide content (up to 0.29 wt%). Furthermore, these films are still transparent and keep their original mechanical properties.Prior to describe the specific applications to optical use, we report here the dynamic mechanical analysis (DMA), X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), and luminescent properties of. nanohybrid films.     

Synthesis and characterization of radiation crosslinked nano silver- polyvinyl alcohol/polyethylene oxide composites

Poly (vinyl alcohol)/poly (ethylene oxide) (PEO/PVA) blends were modified by gamma irradiation in the presence of acrylic acid (AAc) monomer. The modified PVA/PEO blends were then complexed with silver nitrate salt and lithium trifluoromethanesulfonate. Transmission electron microscopy was used to determine the distribution as well as the particle size of the silver nanoparticles (NP) formed in the matrix. The UV–vis absorbance spectra of the prepared grafted nanocomposite membranes confirmed the formation of Ag NP based on their surface plasmon band at 438?nm. The electrical properties of the blended electrolyte polymer films were characterized and discussed.     

Synthesis and characterization of conductive silver ink for electrode printing on cellulose film

Silver nanoparticles with size less than 50 nm were synthesized from silver nitrate, polyvinylpyrrolidone (PVP) and ethylene glycol, where these chemicals acted as metal precursor, stabilizer and reducing agent, respectively. Then a conductive silver ink was prepared with a suitable solvent by adding a viscosifier, hydroxyethyl-cellulose (HEC), and a surfactant, diethylene glycol (DEG). The combined effect of both viscosifier and surfactant on the physical property of the silver ink was analyzed by measuring the contact angle of the silver ink on a cellulose film. Moreover, the influences of PVP molecular weight and reaction temperature on the size of the silver nanoparticles were analyzed. Then the silver ink was coated on the cellulose film by spin coating and the effects of different solvents, sintering temperatures and solid contents on its electrical resistivity were examined. It was found that, with 50 % co-solvent of deionized water and DEG and solid content of around 50 %, the silver ink exhibited the lowest resistivity. This ink can be used for inkjet printing of conductive patterns on cellulose films.     

Mass fabrication of size-controllable hydrogel microarrays by dip-pen nanolithography with viscosity-tunable ink

A method of mass fabricating poly(ethylene glycol) (PEG) hydrogel microarrays is demonstrated. Microarrays of poly(ethylene glycol) dimethacrylate (PEG-DMA) with photoinitiator were patterned by one-dimensional (1-D) parallel dip-pen nanolithography (DPN), and the microarrays were cross-linked to form PEG hydrogels by UV irradiation in N₂ air. As an ink material for DPN printing, solid and liquid phase of PEG-DMA were mixed and prepared to tune viscosity of the ink material by temperature. Thus, the diameter of the microarrays was able to be averagely controlled from 1.7 to 6.2 μm as temperature during printing was increased from 25 °C to 37 °C, respectively. The overall microarrays showed less than 16% coefficient of variation (C.V.). Moreover, small molecules, such as fluorescence dyes, were able to be embedded in the PEG hydrogel microarrays.     

Influence of solvent on solution processed Cu2ZnSnS4 nanocrystals and annealing induced changes in the optical,structural properties of CZTS film

The well-known quaternary Cu₂ZnSnS₄ (CZTS) chalcogenide thin films are playing an important role in modern technology. The CZTS nanocrystal were successfully prepared by solution method using water, ethylene glycol and ethylenediamine as different solvent. The pure phase material was used for thin film coating by thermal evaporation method. The prepared CZTS thin films were characterized by XRD, Raman spectroscopy, FESEM, XPS and FT-IR spectroscopy. The XRD and Raman spectroscopy analysis revealed the formation of polycrystalline CZTS thin film with tetragonal crystal structure after annealing at 450 ^°C. The oxidation state of the annealed film was studied by XPS. A direct band gap about 1.36 eV was estimated for the film from FT-IR studies, which is nearly close to the optimum value of band gap energy of CZTS materials for best solar cell efficiency. The CZTS annealed thin films are more suitable for using as a p-type absorber layer in a low-cost solar cell.     

柠檬酸用量对制备纳米晶CaMnO3粉末的影响

 柠檬酸的用量将影响CaMnO₃粉末性能。以金属硝酸盐为原料,去离子水和乙二醇为溶剂,在不同柠檬酸络合剂用量的情况下,采用溶胶 凝胶法制备了CaMnO₃溶胶。通过煅烧干凝胶前驱物制得了钙钛矿型CaMnO₃多晶粉末。利用X射线衍射仪、扫描电子显微镜、激光粒度分析仪等手段分析了所得粉末。结果表明：所得钙钛矿型CaMnO₃晶粒度在20～50 nm之间,粉末为300～500 nm 多边形颗粒,粒度随柠檬酸用量增加而增大,晶粒尺寸也逐渐增大,增幅均较小。     

Optical, structural and adsorption properties of zinc peroxide/hydrogel nanohybrid films

Hybrid nanofilms from zinc-peroxide/poly(acrylamide) (ZnO₂/PAAm) and zinc-peroxide/poly(N-isopropyl-acrylamide) (ZnO₂/PNIPAAm) were prepared using the photopolymerization procedure. The thin layers were prepared by the combination of the Layer-by-Layer (LbL) self-assembly method and photopolymerization using UV light in every step of the procedure. The hybrid multilayer films consisting of layers of zinc peroxide nanoparticles and hydrogel alternating in a sandwich-like fashion with thicknesses of 65-246 nm. The chemical structures of the hybrid films were investigated by FTIR spectroscopy, their morphology was studied by atomic force microscopy (AFM). The build up of the films was studied by measuring the optical reflection spectrum, and we have calculated the refractive index and layer thickness of the hybrid layers using simulating software. The adsorption properties of the ZnO₂/hydrogel nanohybrid composite networks were investigated by measuring water and ethanol vapour adsorption by a quartz crystal microbalance (QCM). It was established that on partially hydrophobic ZnO₂/PNIPAAm hybrids the adsorbed amounts were lower, against the hydrophilic ZnO₂/PAAm film the vapour amount was higher. These results correspond to those of the bulk gel swelling results.     

Development of hydrogel microstructures on single-walled carbon nanotube films

In this study, the development of polyethylene glycol (PEG) hydrogel microstructures led to the micropatterning of single-walled carbon nanotube (SWCNT) films. Polyethylene glycol was patterned in a process analogous to photolithography in order to manufacture high-density arrays of micrometer-scale hydrogel wells on SWCNT film surfaces. These microwells were composed of hydrophobic SWCNT films surrounded by hydrophilic PEG hydrogel walls. Effects of PEG hydrogel microstructures on the micropatterning of SWCNT films were systematically investigated under different substrates prepared with 3-(trichlorosilyl)propyl methacrylate or octadecyltrichlorosilane solution. A characterization of protein adsorption and an electrochemiluminescence (ECL) reaction were performed to evaluate the biocompatible and electrical efficiency of the patterned SWCNT films in various applications. The proteins selectively adhered to the SWCNT surface inside the microwells, while adherent proteins were absent from the hydrogel walls. In the ECL reaction, the SWCNT films patterned with PEG hydrogel exhibited good, stable ECL behavior, a sign that patterned SWCNT films can be used as flexible and transparent electrodes.     

A comparative study for the electrocatalytic oxidation of alcohol on Pt-Au nanoparticle-supported copolymer-grafted graphene oxide composite for fuel cell application

The platinum-gold bimetallic nanoparticles supported poly(cyclotriphosphazene-co-benzidine)-grafted graphene oxide (poly(CP-co-BZ)-g-GO) composite has been prepared for electrochemical performance studies. Cyclic voltammetry and chronoamperometric studies were carried out to check the electrochemical properties of Pt-Au/poly(CP-co-BZ)-g-GO and Pt/poly(CP-co-BZ)-g-GO catalysts for methanol, ethylene glycol and glycerol in alkaline medium. The morphology and crystalline structure of the prepared Pt-Au/poly(CP-co-BZ)-g-GO and Pt/poly(CP-co-BZ)-g-GO and catalysts have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and fourier transform infrared spectroscopy (FT-IR). From the electrochemical results, it was concluded that Pt-Au/poly(CP-co-BZ)-g-GO catalyst shows higher catalytic activity and stability compared to Pt/poly(CP-co-BZ)-g-GO catalyst. The catalytic activity of Pt/poly(CP-co-BZ)-g-GO catalyst has been compared with Pt/poly(CP-co-BZ), Pt/GO and Pt/C catalysts. In addition, oxidation current of ethylene glycol is higher than the methanol and glycerol in alkaline medium on the prepared catalyst.     

超声喷雾热解法制备SnS薄膜的物性研究

用超声喷雾热解法制备SnS多晶薄膜,对比了三种不同前驱液配比浓度对SnS薄膜性能的影响。XRD测试表明,当前驱液为硫脲(0.5 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,SnO2的衍射峰强度比较大;当前驱液为硫脲(0.6 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,SnS的衍射峰占主要地位,其中也含有一定量的SnO2;当前驱液为硫脲(0.7 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,退火后的薄膜为单一的SnS薄膜,具有斜方晶系结构。SEM观测发现,薄膜均匀、致密,前驱液中硫脲浓度较大时,颗粒也较大。透过谱测试表明,浓度对薄膜透过率影响较小。结合器件的暗I-V和C-V测试,用三种前驱液配比浓度所制备的器件的结特性差异不大;当前驱液中硫脲浓度较大时,载流子浓度相对较大。