Peracid oxidation and photooxygenation reactions of silacyclopentadienes

1-Methyl-1,2,3,4,5-pentaphenyl-1-silacyclopentadiene on treatment with perbenzoic acid afforded a mixture of products consisting of tetraphenylfuran, cis-dibenzoylstilbene, cis-dibenzoylstilbene epoxide, 2,5-dihydro-2,3,4,5-tetraphenylfuran, 1,2,3-triphenyl-1,3-propanedione, 1-methylphenylhydroxysilyl-1,2,3,4-tetraphenyl-1,3-butadiene and cis, cis-1,2,3,4-tetraphenyl-1,3-butadiene. Similarly, hexaphenylsilacyclopentadiene reacted with perbenzoic acid to give a mixture comprising tetraphenylfuran and cis-dibenzoylstilbene. Photooxygenation of 1-methyl-1-vinyl-2,3,4,5-tetraphenyl-1-silacyclopentadiene has been found to give a mixture of products including cis-dibenzoylstilbene, trans-dibenzoylstilbene and isodidesyl. Possible mechanistic pathways for these reactions have been suggested.     

New chemistry of zwitterionic peroxides arising by photooxygenation of enol ethers

The rosebengal-sensitized photooxygenation of 2-methoxynorborn-2-ene(1)in acetaldehyde gave cis-1-carboxaldehyde-3-carbomethoxycyclopentane (31%) and the cis and trans-Me derivatives of the cis-fuscd exo-1,2,4-trioxanes arising by addition of a molecule of oxygen and acetaldehyde to 1 at C3 and C2 respectively (13%) Similar photooxygenation of 2-(methoxymethylidene)adamantane in the presence of acetaldehyde, propionaldehyde and pivalaldehyde gave adamantanone (31–42%), and the cis and trans tricylo[3.3.1.1^3,7]decane-2-spiro-6'-[3-alkyl-5-methoxy-1,2,4-trioxanes] in yields of 32–53% Trioxane formation under similar conditions was experienced for 1,1-di-t-butyl-2-methoxyethene and 2-(methylmercaptomethylidene) adamantane. The results are discussed in terms of an intermediate zwitterionic peroxide which can either close directly to a 1,2-dioxetane or, if aldehyde is present, condense across the CO function giving the 1,2,4-trioxane.     

Thiocarbonyl ylides : Reactions and stereochemical properties of some 4-t-butylcyclohexyl derivatives

The azine from 4-t-butylcyclohexanone on treatment with hydrogen sulfide under pressure is converted to a mixture of stereoisomeric 1,3,4-thiadiazolidines. Dehydrogenation of this mixture with an alkyl azodicarboxylate afforded in quantitative yield (based on azine) a mixture of the three possible Δ³-1,3,4-thiadiazolines. These three isomers have been isolated and their structures have been established as trans,trans-3,11-di-[1,1-dimethylethyl]-14,15-diaza-7-thiadispiro[5.1.5.2]pentadeca-14-ene(5); the cis,cis-isomer (6), and the cis,trans-isomer (7). Pyrolysis of either 5 or 6 leads in quantitative yield to cis,trans-3,10-di-[1,1-dimethylethyl]thiadispiro[5.0.5.2]tridecane (8), the formation of which is rationalized by conrotatory ring closure of the same thiocarbonyl ylide (24) formed from either 5 or 6. Pyrolysis of 7 leads exclusively to a thiirane isomeric with 10 and which is assigned the cis,cis-structure (9). The thiiranes 8 and 9 are desulfurized by tri-n-butylphosphine to the anti- and syn-1-(1,1-dimethylethyl)-4-[4-(1,1-dimethylethyl)cyclohexylidene]cyclohexanes (11 and 12), respectively. The cycloadditions of the thiocarbonyl ylides derived from 5–7 with dimethyl acetylenedicarboxylate and dimethylazodicarboxylate have been examined but stereochemistries have not been assigned to these products. Cis additions to the olefins (11 and 12) have been investigated with the most attention having been paid to the reactions with osmium tetroxide. The configurations of the glycols expected from these reactions have been correlated by comparison with the three possible glycols (16–18) obtained from pinacol reduction of 4-t-butylcyclohexanone. These three glycols have been separated and their configurations assigned from PMR and IR data. A discussion of the stereochemical implications of the various results is given.     

Electrocyclic reactions of tetraenes: Influence of terminal substituents

Conjugated tetraenes with both central double bonds of cis configuration undergo a series of thermal reactions, the observable products being markedly dependent on the nature of the terminal substituents. Dimethyl 2E,4Z,6Z,8E-decatetraene-1,10-dioate (16) was prepared and found to cyclize readily at 50° to trans dimethyl 2,4-bicyclo[4.2.0)octadiene-6,7-dicarboxylate (18). This reaction proceeds to equilibrium, and the rates and equilibrium constants at the indicated temperatures are: 3.0 × 10^-5 sec^-1 ?40°; 8.2 × 10^-5 sec^-1, 16.0,50°; ?10.0,75°; ?7.47,100° with the equilibrium favoring (18). A sample of 1,8-diphenyl-1E,3Z,5Z;7E-octatetraene (1) showed no reaction below 120°, and at 175° all trans 1,8-diphenyl-octatetraene, cis and trans stilbenes, trans-5-phenyl-6(cis-styryl)-1,3-cyclohexadiene cis-5-phenyl-6-(trans-styryl)-1,3-cyclohexadiene, and cis and trans 6,8-diphenyl-tricyclo[3.2.1.0^2.7]oct-3-enes were formed. At 100° in the presence of excess dimethyl acetylenedicarboxylate 1 gave dimethyl trans-3,4-diphenyltricyclo[4.2.2.0^2.5]deca-6,9-dien-6,7-dicarboxylate. Finally 1,4-di(1-cyclohexen-1-yl)-1,3-batadiyne, hydrogenated over a Lindlar catalyst, gave only tricyclo[10.4.0.0^6,11]hexadeca-1,3,5-triene.     

Die rotationsisomerie des bicyclopropyls: III Untersuchung der inneren rotation von bicyclopropyl,vinylcyclopropan, butadien und einiger verwandter verbindungen mit der kraftfeld-methode

The steric potentials to internal rotation of the following 12 compounds have been calculated by an empirical force-field method: bicyclopropyl 1, vinylcyclopropane 2, butadiene 3, isopropylcyclopropane 4, vinylisopropyl 5, diisopropyl 6, methylcyclopropane 7, hexamethylethane 8, 1,1'-dimethyl-bicyclopropyl 9, trans,trans-tetramethyl-bicyclopropyil 10, cis,trans-tetramethyl-bicyclopropyl 11, octamethyl-bicyclopropyl 12. The barriers of the conjugation potentials in the series 1–3 have been estimated to be 2, 4 and 6 kcal mol^?1. With these values the true or most probable torsional potential curves of 1, 2 and 3 have been simulated by superposing on the steric potential a symmetric conjugation potential and a correction term for the cis repulsion. The total potentials thus obtained satisfactorily reproduce the known characteristics of the conformational behaviour of 1 and 3. In particular, the three-fold torsional potential of butadiene is thus explained.     

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene- and -1,3,5-triene-tethered nitrile oxides gave tricyclic isoxazolines as a single stereoisomer in most cases. The relative stereochemistry of tricycle-fused isoxazolines resulting from 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides is cis-cis, whereas from cyclohepta-1,3,5-triene-tethered nitrile oxides the cis-trans isomer predominates.     

Catalytic activity of Mn(III) and Fe(III) complexes of meso-tetra(n-propyl)porphyrin in oxidation of olefins: Meso-alkyl substituent in comparison with the alkenyl and aryl ones

Catalytic activity of Mn(III) and Fe(III) complexes of meso-tetra(n-propyl)porphyrin, MnT(n-Pr)P(X) and FeT(n-Pr)P(X) (X = Cl, SCN, OAc) in oxidation of olefins with tetra-n-butylammonium periodate at room temperature has been studied. The influence of different parameters including the molar ratio of catalyst to imidazole, type of counter ion (X) and oxidative stability of metalloporphyrins on the efficiency of the catalysts was investigated. The results of competitive oxidation of cis- and trans-stilbene suggest the presence of a high-valent Mn-oxo as the predominant oxidant species in equilibrium with a six coordinate complex, MnT(n-Pr)P(ImH)(IO₄) in the case of MnT(n-Pr)P(OAc). An unusual preference for trans-stilbene over cis-stilbene was observed in the reaction catalyzed by FeT(n-Pr)P(OAc). Control reaction indicated a significant cis- to trans-isomerization (81%) in oxidation of cis-stilbene catalyzed by FeT(n-Pr)P(OAc) which may explain the observed unusual cis to trans-stilbene oxide ratio. While oxidation of cyclooctene and styrene led to the exclusive formation of the corresponding epoxides, oxidation of cyclohexene gave 2-cyclohexe-1-ol and cyclohexene oxide as the products. However, the results of this study clearly demonstrate the key role played by the group substituted at the meso positions of metalloporphyrins on their catalytic activity, apart from the electron-donating or electron-withdrawing properties of the substituents.     

Binuclear versus mononuclear copper complexes as catalysts for asymmetric cyclopropanation of styrene

A number of (S)-(−)-2-amino-1,1-diaryl-1-propanol compounds have been synthesized. They were used to form the binuclear copper complexes through a spontaneous assembly of the individual components, the β-aminoalcohol, 2-hydroxy-5-methyl-1,3-benzenedialdehyde, and copper acetate monohydrate, in methanol. These binuclear complexes were examined as asymmetric catalysts for cyclopropanation of styrene by ethyl diazoacetate. Moderate improvement in enantioselectivity has been observed for the binuclear versus mononuclear copper complexes. The e.e. values up to 87% for trans and 93% for cis products and the ratio between trans and cis products up to 9:1 have been obtained.     

The di-π-methane rearrangement of systems with simple vinyl moieties : Mechanistic and exploratory organic photochemistry

3,3-Dimethyl-1,1-diphenyl-1,4-pentadiene and two 5-substituted derivatives were synthesized and studied. The regioselectivity, stereochemistry, quantum efficiency, multiplicity, and excited state reaction rates were studied in each case. The parent hydrocarbon, 5-MeO-derivative, and 5-cyano-diene—all rearranged on direct irradiation to give vinylcyclopropanes. The first compound led to 3,3-dimethyl-2,2-diphenyl-1-vinylcyclopropane. The second afforded 3,3-dimethyl-2,2-diphenyl-1-(2'-methoxyvinyl)cyclopropane. The last gave 1-cyano-3,3-dimethyl-2-(2',2'-diphenylvinyl)cyclopropane. Thus, the vinyl and methoxyvinyl groups survive in the products intact, while the cyanovinyl group is incorporated in the three-ring. In the two substituted dienes, cis-reactant gave cis-product and trans-reactant gave trans-product, both where the substituent was on the vinyl group of the product and where it became a ring substituent. The substituted di-π-methane systems underwent only cis-trans isomerization on sensitization, while the parent, unsubstituted diene led to di-π-methane product on sensitized as well as direct photolysis. While the quantum yields for the hydrocarbon diene were the same at room temperature for the direct and sensitized runs, only the sensitized runs showed a temperature dependence of efficiency with a dramatic, 5-fold increase on a 46° temperature increase. Thus, evidence was obtained for a singlet rearrangement in all cases and a triplet process only in the case of the unsubstituted diene. A sizable activation energy was seen for the triplet but not for the singlet. The room temperature quantum yields in the direct irradiations were: φ(parent diene)=0.011, φ(trans-methoxydiene)=0.051, φ(cis-methoxy-diene)= 0.050, φ(trans-cyanodiene)=0.36, and φ(cis-cyano-diene) = 0.20. A competing side reaction was cis-trans isomerization but these quantum yields were lower. Single photon counting was employed to obtain excited singlet reaction and decay rates at low temperature (i.e. 77°K) and the method of magic multipliers was used to obtain room temperature rates. These were: k_r(parent diene) = 4.7 × 10⁸ sec^?1, k_r(trans-cyano-diene)= 1.5 ×10¹⁰ sec^?1, k_r(cis-cyano-diene)= 8.0 × 10⁹sec^?1, and k_r(trans-methoxy-diene) = 1.9 × 10⁹ sec^?1. The results are discussed in terms of excited state molecular structure.An SCF-CI molecular orbital treatment of the reaction was developed. This used a cyclopropyldicarbinyl diradical species, with Walsh cyclopropane basis orbitals, as representing the half-reacted species. The energy of formation of this species from vertical excited state reactant was calculated for all three dienes and an excellent correlation with observed excited singlet rates was obtained. Similarly, dissection of the excited diradical energy into bond components led to a correlation between regioselectivity and weakness of the three-ring bond broken in the regioselectivity-determining step. Evidence was adduced for localization of the excitation energy in S₁ of reactant in the diphenylvinyl chromophore with migration of electronic excitation into the cyclopropyldicarbinyl diradical moiety during the vinyl-vinyl bridging process. A general method for quantitatively partitioning excitation energy was developed and applied to the case in hand. Finally, there was predicted a greater probability of di-π-methane three-ring fission in the excited state compared to the diradical ground state where Grob fragmentation proved energetically more favorable.     

Semi-preparative high-performance liquid chromatographic separation of ceralure and related isomers

Summary A semi-preparative high-performance liquid chromatographic procedure on 5-m silica was developed for the isolation of gram quantities of ethyltrans-5-iodo-trans-2-methylcyclohexane-1-carboxylate (B₁) and ethyltrans-4-iodo-trans-2-methylcyclohexane-1-carboxylate (B₂) for comparative evaluation as male Mediterranean fruit fly,Ceratitis capitata, attractants and for NMR studies. This procedure can also be used analytically to determine the content of B₁ (the attractive isomer) in ceralure, the ethyl 4- and 5-iodo-trans-2-methylcyclohexane-1-carboxylate mixture. 1,1-Dimethylethylcis-5-iodo-trans-2-methylcyclohexane-1-carboxylate (A) and 1,1-dimethylethylcis-4-iodo-trans-2-methylcyclohexane-1-carboxylate (C) were isolated and converted to their ethyl esters, thus supplying the fourtrans-isomers of ceralure.     

Non-terpenoid C-15 metabolites from the red seaweed Laurencia pinnatifida

The structures of absolute configurations of the halogenated vinyl acetylenes which are natural products from the red alga Laurencia pinnatifica (Gmal. Lamour) are described. The structure of trans- pinnatifidenyne 2 was determined by spectral, chemical and X-ray diffraction analyses. The structure of cis-pinnatifidenyne 1 is based on spectral comparison and chemical interconversion with the trans-isomer 2. The structure of the acyclic trienyne 8 was secured as: (6R,7R)-3-cis, 9-cis,12-cis,6-acetoxy,7-chloropentadeca-3,9,12-trien-1-yne by synthesis from cis-pinnatifidenyne 1. The reactivity of these compounds to various conditions of catalytic hydrogenation has been examined in detail.     

Stereoselective ring-opening reactions with AcBr and AcCl. A new method for preparation of some haloconduritols

The actions of AcX (X=Br, Cl) on 7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetates and a transoid-epoxide prepared from the acetonide of cyclohexa-3,5-diene-cis-1,2-diol were studied. H₂SO₄-catalyzed cleavage of exo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcCl gave (1α,2α,3α,6β)-6-chloro-4-cyclohexene-1,2,3-triol triacetate, from which the corresponding chloroconduritol was obtained by trans-esterification (MeOH/HCl). A similar reaction of the exo-diacetate with AcBr in the presence of H₂SO₄ resulted in bromine addition. The formation of bromine from the reaction of AcBr and H₂SO₄ was observed by independent experiments. H₂SO₄-catalyzed reaction of endo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcX (X=Br, Cl) gave (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates. The reaction of the transoid-epoxide with AcX (X=Br, Cl) with no catalyst gave also (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates.     

Heterobimetallic [Ru(II)/Fe(II)] complexes: On the formation of trans- and cis-[RuCl2(dppf)(diimines)]

The synthesis and characterization of trans/cis-[RuCl₂(dppf)(diimines)], dppf = 1,1′-bis(diphenylphosphino)ferrocene; diimines = 2,2′-bipyridine (trans/cis-(1)), the new complexes with 4,4′-dimethyl-2,2′-bipyridine (trans/cis-(2)) and 1,10-phenanthroline (cis-(3)) are presented. The complexes were synthesized using two routes and the trans/cis-isomer formation is dependent upon conditions and the precursor applied. The trans-isomer (kinetic) readily isomerizes to the cis-isomer (thermodynamic) when exposed to light (fluorescent) and this process was followed by cyclic voltammetry and UV-vis. The electrochemical studies on these complexes reveal that Fe^(III)/Fe^(II) couples are insensitive to the isomer (trans/cis) formed, but the Ru^(III)/Ru^(II) couples are dependent on the isomer. Transfer-hydrogenation reactions for reduction of acetophenone were conducted using complexes cis-(1) and cis-(2) and the results are compared with that obtained for similar complexes. X-ray structure for cis-(3) are presented and discussed.     

Stereochemical studies—XIII: Cyclic aminoalcohols and related compounds—VI synthesis of the four 2-amino-4-t-butylcyclopentanol isomers

From diethyl 3-t-butyladipate (5), via cis- and trans-4-t-butylcyclopentene-1,2-oxide (31, 32) as key compounds, the syntheses of cis-2-amino-cis-4-t-butylcyclopentanol (1), cis-2-amino-trans-4-t-butylcyclopentanol (2), trans-2-amino-cis-4-t-butylcyclopentanol (3) and trans-2-amino-trans-4-t-butylcyclopentanol (4) have been achieved. 1, 3 and 4 were also synthesized from the corresponding 2-hydroxy-4-t-butylcarboxylic acids by Curtius degradation of the hydrazides (11, 18, 19). The steric course of process leading to the above compounds is discussed.     

Thermisches Verhalten von 1,2-Dipropenylbenzolen

1-cis, 2-cis-Dipropenylbenzene (cis, cis- 1 ) isomerises thermally at 215–235° with 1st order kinetics to give trans, cis- 1 and vice versa. At equilibrium 89% trans, cis- and 11% cis, cis- 1 are present. It is shown by thermal rearrangement of cis, cis-2′, 2″-d₂- 1 that the isomerisation is attributable to aromatic [1, 7a]-sigmatropic H-shifts. trans, trans- 1 rearranges thermally at 225–245° to yield 2, 3-dimethyl-1, 2-dihydronaphthalene ( 2 ). The formation of 2 can be visualized by disrotatory ring closure followed by an aromatic [1, 5s]-sigmatropic H-shift. 2 is also formed when, cis, cis- or trans, cis- 1 are heated for 153 h at 225°. Besides 2 a small amount (3%) of 1-ethyl-1, 2-dihydronaphthalene ( 5 ) is formed. The rearrangement of trans, trans- 1 and trans, trans-2′, 2″-d₂- 1 shows a secondary isotope effect k_H/k_D = 0,90.     

Chromatographic study of thermal reactions of cis- and trans-[Coen2 (OCOC6H4X)2]NO3 complexes in the solid phase

Thermal reactions of some cis- and trans-[Coen₂(OCOC₆H₄X)₂]NO₃ complexes mixed with ammonium or sodium chloride, nitrate and sulphate are reported. Reflectance spectra have shown a cis to trans thermal isomerization and, in the presence of NH₄Cl, the formation of trans-[Coen₂Cl₂]Y as final product. For the cis-isomers, the most interesting result is the chromatographic evidence of a stepwise reaction, resulting in the replacement of one carboxylato ligand by chloride and the formation of an intermediate species, characterized as trans-[Coen₂(OCOC₆H₄X)Cl]Y. These intermediate species, are hardly detectable in the corresponding reactions of the trans-isomers. These results may mean that in the trans-carboxylato compounds the reaction rate of the second step is higher than that of the first, while the reverse can be supposed in the corresponding reaction of the cis-isomers.     

A mechanistic study of the acid- and base-catalysed cleavages of β-trimethylstannylstyrenes

The cleavages of cis- and trans-PhCHCHSnMe₃ in 1/10 AcOD-MeOD have been shown to give cis- and trans-PhCHCHD, respectively. The rates of cleavage of some XC₆H₄CHCHSnMe₃ compounds in 1/10 AcOH-MeOH at 50°C have been measured; there is no significant difference between the rates for cis- and trans-PhCHCHSnMe₃, and the relative rates of cleavage as X is varied are (X  H), 1.0; p-OMe, 7.0; p-Me, 2.3; m-Cl, 0.34; m-Br, 0.36. There is an excellent correlation with σ⁺ constants, with a ρ value of 1.1. The results are interpreted in terms of rate-determining proton transfer to the β-carbon atoms, and it is suggested that acid cleavages of vinylHgX bonds involve analogous mechanisms. PhSnMe₃ is cleaved 20 times as slowly as PhCHCHSnMe₃ in the 1/10 AcOH/MeOH.The rates of cleavage of XC₆H₄CHCHSnMe₃ compounds by a mixture of MeOH (3 vol.) and 2 M aqueous NaOH (2 vol.) have been measured; trans-PhCHCHSnMe₃ is cleaved about 1.3 times as rapidly as its cis-isomer, and about 12 times as rapidly as a mixture of cis- and trans-PhCHCHSnEt₃. The relative rates for the various XC₆H₄CHCHSnMe₃ compounds (mainly trans-isomers) are (X ) H, 1.0; p-OMe, 0.99; p-Me, 0.92; m-Cl, 1.67; m-Br, 1.65. Cleavage of trans-PhCHCHSnMe₃ by NaOD/D₂O/MeOD gives exclusively trans-PhCHCHD. For cleavages in methanolic NaOMe the values of the rate isotope effects, (the ratio k_meOH/k_MeOD) are 2.3–2.6, and those of the product isotope effects, PIE (the product ratio RH/RD on cleavage of RSnMe₃ by NaOMe in 1 : 1 MeOH/MeOD) are 4.5–5.0.The results are interpreted in terms of proton transfer from the solvent to the leaving carbon atom in the rate determining step as the SnC bond breaks as a result of the attack of the base anion at tin in a prior or synchronous process. PhCHCHSnMe₃ is cleaved by the aqueous alcoholic base about 5 times as rapidly as PhSnMe₃.Cleavage of trans-PhCHCHSnMe₃ by PHCOCl in presence of AlCl₃ in CH₂Cl₂ gives trans-PhCHCHCOPh, and cleavage of a 90/10 mixture of trans- and cis-PhCHCHSnMe₃ by bromine in CCl₄ gives a corresponding mixture of trans- and cis-PhCHCHBr.     

The isomerization of cis,trans-1,5-cyclodecadiene by RhCl3 · 3H2O in ethanol

The isomerization of cis,cis-1,6-cyclodecadiene to cis,trans-1,5-; and cis,cis-1,5-cyclodecadiene in the presence of their rhodium complexes seems to indicate an isomerization for which no thermal conversion has been reported. Evidences are presented for the functioning of ethanol as a hydride source in these polymerizations.     

Highly stereoselective transformation of (1S,3S)-cis-1,3-disubstituted tetrahydro-β-carbolines into (1S,3R)-trans-1,3-disubstituted tetrahydro-β-carbolines: an improved asymmetric synthesis of tadalafil from l-tryptophan

An efficient and general method for the highly stereoselective transformation of (1S,3S)-cis-1,3-disubstituted 1,2,3,4-tetrahydro-β-carbolines (THBCs) into (1S,3R)-trans-1,3-disubstituted THBCs is described. The method contains the following three steps: the enantiomerically pure (1S,3S)-cis-1,3-disubstituted THBCs 1 were first converted into (1S,3S)-cis-1,2,3-trisubstituted THBCs 2 by N-1-naphthylmethylation/benzylation; (1S,3S)-cis-1,2,3-trisubstituted THBCs2 were then converted into (1S,3R)-trans-1,2,3-trisubstituted THBCs 3 in high yields and with high stereoselectivities via a base-catalyzed epimerization at C-3; (1S,3R)-trans-1,2,3-trisubstituted THBCs 3 were subsequently converted into (1S,3R)-trans-1,3-disubstituted THBCs 4 after reductive removal of the 1-naphthylmethyl/benzyl group. In addition, as an application of this method, an improved and highly stereoselective synthesis of the PDE5 inhibitor tadalafil (Cialis®) starting from natural and less expensive l-tryptophan was developed.     

Reactions of dispiro[2.0.2.2]oct-7-ene. Electrophilic and free radical additions

Dispiro[2.0.2.2]oct-7-ene 1 was synthesized by debrominatioa of cis- and trans-7,8-dibromodispiro[2.0.2.2]octane 3a with LAH and by dechlorination of cis- and trans-7,8-dichlorodispiro[2.0.2.2]octane 3b with magnesium. Stepwise electrophilic additions to 1 of HBr, HI, Br₂ and Cl₂ were studied. The major products (and yields) from these reactions were: 7-bromodispiro[2.0.2.2]octane 2a (43%), 4-iodo-4,5-ethanospiro[2,3]hexane 4b (ca. 50%); trans-3a (40%); and cis-3b (20%). Free-radical addition of hydrogen bromide to 1 gave an 80% yield of 7-bromodispiro[2.0.2.2]octane 2a. At ?10°, hydroboration-oxidation of 1 was found to give mainly 7-hydroxydispiro[2.0.2.2]octane 2a in ca. 90% yield; at 25°, near equal amounts of 2c and 4-(2-hydroxyethyl) spiro[2.3]hex-4-ene 14 were obtained.