Factors influencing the mechanism of surfactant catalyzed reaction of vitamin C-ferric chloride hexahydrate system

The kinetics of vitamin C by ferric chloride hexahydrate has been investigated in the aqueous ethanol solution of basic surfactant viz. octadecylamine (ODA) under pseudo-first order conditions. The critical micelle concentration (CMC) of surfactant was determined by surface tension measurement. The effect of pH (2.5–4.5) and temperature (15–35°C) in the presence and absence of surfactant were investigated. Activation parameters, ΔE _a, ΔH ^#, ΔS ^#, ΔG ^≠, for the reaction were calculated by using Arrhenius and Eyring plot. Surface excess concentration (Γ_max), minimum area per surfactant molecule (A _min), average area occupied by each molecule of surfactant (a), surface pressure at the CMC (Π_max), Gibb’s energy of micellization (ΔG _M°), Gibb’s energy of adsorption (ΔG _ad°), were calculated. It was found that the reaction in the presence of surfactant showed faster oxidation rate than the aqueous ethanol solution. Reaction mechanism has been deduced in the presence and absence of surfactant.     

Conductometry and Thermodynamics Study of Metal Dodecyl Sulfates in Aqueous Solution

The aggregation behavior of metal dodecyl sulfates (MDS), [Na¹⁺, Mg²⁺, Mn²⁺, Co²⁺, and Ni²⁺] in water has been studied by electrical conductivity (at 293.15–333.15 K) and surface tension methods (at 303.15 K). Critical micelle concentrations (CMCs), degree of counterion dissociation (β) evaluated from conductivity data. Using law of mass action model, the thermodynamic parameters viz. Gibbs energy (ΔG_m ⁰), enthalpy (ΔH_m ⁰), and entropy (ΔS_m ⁰) were evaluated. The enthalpy of micellization decreases strongly with increasing temperature. ΔG is always negative (thermodynamically favored process) and slightly temperature and counterion dependent. Gibbs energy and entropy exploit micellization as thermodynamic favorable process. The electrostatic repulsions between ionic head groups, which prevent the aggregation, are progressively screened as the ionic character decreases with the size of the counterion. The plots of differential conductivity, (dk/dc) _T,P , versus the total surfactant concentration enables us to determine the CMC values more precisely than the conventional method. Surfactants with strong condense counterion are adapted to rodlike micelle better than to a spherical micelle. The data are explained in terms of molecular characteristics of surfactants viz. degree of dissociation, polar head group size and counterion.     

Thermodynamic activation parameters for viscous flow of dilute aqueous solutions of ethylenediamine,trimethylenediamine and N,N-dimethyltrimethylenediamine

The density and the viscosity data have been used to determine the thermodynamic activation parameters, free energies (ΔG ^?), enthalpies (ΔH ^?) and entropies (ΔS ^?), for viscous flow of the systems; water (W) + ethylenediamine (ED), W + trimethylenediamine (TMD) and W + N,N-dimethyltrimethylenediamine (DMTMD) in the temperature range of 303.15–323.15 K over the composition range of 0 ≤ X ₂ ≤ 0.45, where X ₂ is the mole fraction of diamines. On addition of diamines to water, ΔG ^?, ΔH ^? and ΔS ^? values increase sharply, pass through a maximum and then decline. The heights of maximum in the ΔG ^? versus X ₂ curve vary as, W + DMTMD > W + TMD > W + ED. For all systems, the excess properties, ΔG ^{? E} , ΔH ^{? E} and ΔS ^{? E} are positive. The observed increase in thermodynamic values may be due to combined effect of hydrophobic hydration of diamines and water–diamine interaction as a result of hydrophilic effect.     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

Substituent effects on the reactions of aromatic triflones with para‐X‐anilines in methanol: Low intrinsic reactivity and transition state imbalances

A kinetic study is reported for S_NA_r reactions of 2,4,6‐tris(trifluoromethanesulfonyl) anisole 1a with a series of para‐X‐substituted anilines 2a–e in a methanol solution at various temperatures. The substituent effects on free energy (Δ^≠G), enthalpy (Δ^≠H), and entropy (Δ^≠S) of activation are examined. Aniline addition to triflone 1a is characterized by a β_X=0.57, α_Z=0.31, and an imbalance of I = α_Z–β_X=?0.26. The imbalance shows that resonance development lags behind C? N bond formation at the transition state. Interestingly, analysis of the results in terms of Marcus theory reveals that these S_NAr are associated with some extremely low intrinsic reactivity (log k_o=?1.25& © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 255–262, 2011     

Thermal characterization and kinetic analysis of nano‐ and micro‐Al/NiO thermites: Combined experimental and molecular dynamics simulation study

In the experimental part of this study, thermal properties of the Al and NiO composites in micro‐ and nano‐sized Al are investigated. Differential scanning calorimetry (DSC) analysis of the onset temperatures of ignition, activation energy (E_a), frequency factor (A), rate constant (k), critical ignition temperature of thermal explosion (T_b), and self‐accelerating decomposition temperature (T_SADT), as well as the thermodynamic parameters (ΔS^≠ , ΔH^≠ , and ΔG^≠ ) are used to explore the thermal behavior and analyze the kinetics. Thermal analysis suggests that the mechanism is based on solid–solid diffusion and liquid–gas for the nano‐ and micro‐Al/NiO composite, respectively. Our results indicate that the incorporation of nano‐Al particles can significantly reduce the ignition temperature, E_a, A, k, T_b, and T_SADT. In the second part of this work, molecular dynamics (MD) simulation is used to investigate the behavior of Al/NiO thermite reaction using the Reaxff force field to evaluate the experimental results. Theoretically, MD results show 1,154 K as the reaction ignition temperature, which is in reasonably good agreement with experimental temperature of 893°C (1,166 K). The radial distribution function (RDF) shows that no reaction occurs at 500 K but it is complete at 1,200 K.     

Kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) in macromolecular assemblies of CTAB

The kinetics of basic hydrolysis of tris(1,10‐phenanthroline)iron(II) has been carried out in aqueous, N‐cetyl‐N,N,N‐trimethyl ammonium bromide (CTAB) micellar, and CTAB reverse micellar media by UV–visible spectroscopy system. The reaction follows the overall second‐order kinetics; first order in each Fe(II) complex and the base (^?OH). CTAB micelles catalyze the reaction rate through the adsorption of the Fe(II) complex and the hydroxyl ions on the micellar surface. In the reverse micellar medium, interesting physicochemical features are observed. Being ionic nature of reactants, both the reactants prefer to stay and react inside the water pool in place of the hydrophobic environment. The rate increases with w, that is, the size of the water pool, attains a maximum value at w = 8.33, and then decreases. But the rate increases as the concentration of surfactant increases at fixed w values. For a better explanation of the kinetic data, the activation parameters, standard enthalpy of activation (Δ^?H°), standard entropy of activation (Δ^?S°), and energy of activation (E_a) were determined. All kinetic data corroborate the proposed mechanism. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 579–589, 2011     

Studies on the Effects of Additional Components on Micellization of CTAB via Surface Tension Measurements

The effects of Tris-HCl buffer solution on the cmc of cetyltrimethylammonium bromide (CTAB) were studied by surface tension measurement. The result shows that the effect of the buffer solution depends on the interaction between CTAB and NaCl and the structure accelerants of water, Tris. A series of parameters, including the critical micelle concentration (cmc), the surface tension at cmc (γ_cmc), the adsorption efficiency (pC₂₀), and the effectiveness of surface tension reduction (∏_cmc) were obtained from the surface tension measurements in the presence of glycine with different concentration in the Tris-HCl buffer solution at 27°C. In addition, maximum surface excess concentration (Γ _max) and minimum surface area per molecule (A_min) at the air-water interface were estimated according to the Gibbs adsorption isotherm. The thermodynamic parameters (Δ C _p,m , Δ H _m,tr , Δ C _p,m,tr ) of micellization for CTAB in the absence and presence of glycine at different temperature were also been obtained.     

Excess properties and spectroscopic studies of binary system 1,4-butanediol + water at T = (293.15, 298.15, 303.15, 308.15, 313.15 and 318.15) K

Density and dynamic viscosity data were measured over the whole concentration range for the binary system 1,4-butanediol (1) + water (2) at T = (293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K as a function of composition under atmospheric pressure. Based on density and dynamic viscosity data, excess molar density (ρ^E), dynamic viscosity deviation (Δν) and excess molar volume (V_m^E) were calculated. From the dynamic viscosity data, excess Gibbs energies (ΔG*^E), Gibbs free energy of activation of viscous flow (ΔG*), enthalpy of activation for viscous flow (ΔH*) and entropy of activation for viscous flow (ΔS*) were also calculated. The ρ^E, V_m^E, Δν and ΔG*^E values were correlated by a Redlich?Kister-type function to obtain the coefficients and to estimate the standard deviations between the experimental and calculated quantities. Based on FTIR and UV spectral results, the intermolecular interaction of 1,4-butanediol with H₂O was discussed.     

Synthesis and Properties of Novel Cationic Triazolium Gemini Surfactants

New type of triazolium Gemini surfactants were synthesized by reaction of epichlorohydrine with long-chain fatty alcohols namely cetyl alcohol and oleyl alcohol furnishing product 2-(alkoxymethyl)oxirane followed by the their subsequent treatment with triazole resulting in the formation of 1-(1,2,4-triazole)-3-alokoxypropane-2-ol which on reaction with 1,6-dibromohexane resulted in the formation of triazolium-based cationic Gemini surfactant. Their formation was confirmed by IR spectroscopy. Surface tension values were used to determine the critical micelle concentration (CMC), minimum area per molecule (A_min) at air?water interface, Gibbs free energy of adsorption (ΔG_ads), the maximum surface excess concentration (Γ_max), and other parameters. The inhibition behavior of dimeric surfactant on the corrosion of carbon steel (CS) in 1 N H₂SO₄ aqueous medium was studied at 30°C. Performance tests like dispersion capability, foaming power and stability, emulsifying power, and wetting ability were determined. The obtained results show that dispersion capability, foaming power, foaming stability, and emulsifying ability are very good. The wetting power of synthesized surfactants is quite better.     

Effects of Different Doses of Low Power Continuous Wave He–Ne Laser Radiation on Some Seed Thermodynamic and Germination Parameters,and Potential Enzymes Involved in Seed Germination of Sunflower (Helianthus annuus L.)

In this study, water-soaked seeds of sunflower were exposed to He–Ne laser irradiation of different energies to determine whether or not He–Ne laser irradiation caused changes to seed thermodynamic and germination parameters as well as effects on the activities of germination enzymes. The experiment comprised four energy levels: 0 (control), 100, 300 and 500 mJ of laser energy and each treatment replicated four times arranged in a completely randomized design. The experimentation was performed under the greenhouse conditions in the net-house of the Department of Botany, University of Agriculture, Faisalabad. The seed thermodynamic parameters were calculated according to seed germination thermograms determined with a calorimeter at 25.8°C for 72 h. Various thermodynamic parameters of seed (ΔH, (ΔS)_e, (ΔS)_c, (ΔS)_e/Δt and (ΔS)_c/Δt) were affected significantly due to presowing laser treatment. Significant changes in seed germination parameters and enzyme activities were observed in seeds treated with He–Ne laser. The He–Ne laser seed treatment resulted in increased activities of amylase and protease. These results indicate that the low power continuous wave He–Ne laser light seed treatment has considerable biological effects on seed metabolism. This seed treatment technique can be potentially employed to enhance agricultural productivity.     

Synthesis and Properties of [Ba(CHZ)(BT)(H2O)2]n as a New Energetic Coordination Compound

In order to enhance the thermal stability of the barium salt of 5,5′‐bistetrazole (H₂BT), carbohydrazide (CHZ) was used to build [Ba(CHZ)(BT)(H₂O)₂]_n as a new energetic coordination compound by using a simple aqueous solution method. It was characterized by FT‐IR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction. The crystal belongs to the monoclinic P2₁/c space group [a = 8.6827(18) Å, b = 17.945(4) Å, c = 7.2525 Å, β = 94.395(2)°, V = 1126.7(4) ų, and ρ = 2.356 g · cm^–3]. The Ba^II cation is ten‐coordinated with one BT^2–, two shared carbohydrazides, and four shared water molecules. The thermal stabilities were investigated by differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). The dehyration temperature (T_dehydro) is at 187 °C, whereas the decomposition temperature (T_d) is 432 °C. Non‐isothermal reaction kinetics parameters were calculated by Kissinger's method and Ozawa's method to work out E_K = 155.2 kJ · mol^–1, lgA_K = 9.25, and E_O = 158.8 kJ · mol^–1. The values of thermodynamic parameters, the peak temperature (while β → 0) (T_p0 = 674.85 K), the critical temperature of thermal explosion (T_b = 700.5 K), the free energy of activation (ΔG^≠ = 194.6 kJ · mol^–1), the entropy of activation (ΔS^≠ = –66.7 J · mol^–1), and the enthalpy of activation (ΔH^≠ = 149.6 kJ · mol^–1) were obtained. Additionally, the enthalpy of formation was calculated with density functional theory (DFT), obtaining Δ_fH°₂₉₈ ≈ 1962.6 kJ · mol^–1. Finally, the sensitivities toward impact and friction were assessed according to relevant methods. The result indicates the compound as an insensitive energetic material.     

Surface activity and thermodynamic properties of water‐soluble polyester surfactants based on 1,3‐dicarboxymethoxybenzene used for enhanced oil recovery

The surface activity and thermodynamic properties for eight low molecular weight nonionic co‐polyester (PE) surfactants have been investigated. Surface and interfacial tensions (IFT) of surfactants in aqueous solutions were measured using the spinning drop technique. From these measurements, the critical micelle concentration (CMC), the surface pressure at CMC (Y_CMC), the maximum surface concentration (Γ_max), the minimum area/molecule at the aqueous solution/air interface (A_min), the effectiveness of surface tension reduction (Π_CMC), the alkane carbon number (n_min) and the IFT at n_min (Y_min) were determined. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic and ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad and ΔS_ad) for these polymeric surfactants were also calculated. Structural effects on micellization and adsorption are discussed in terms of these parameters. The results show that the ΔG_ad values were more negative than ΔG_mic values for these compounds, so that they favored adsorption before the micellization process. They exhibited IFT in the order of 10⁻³ to 10⁻⁴ mN/m against the thin alkane carbon number range 6–9. This range seemed to be prefered for enhanced oil recovery. Copyright © 2000 John Wiley & Sons, Ltd.     

Effect of Organic Counterions on the Properties of N-Lauryl Diisopropanolamine Surfactants

The influence of counterions on the surface properties of N-lauryl diisopropanolamine surfactants is delineated using conductometry and surface tension measurements. Twelve types of organic counterions have been studied: C₁–C₁₂ monocarboxylic acids anions. The surface properties of the synthesized surfactants, including surface tension, critical micelle concentration (CMC), effectiveness (π_CMC), efficiency (pC₂₀), maximum surface excess (Γ_max), minimum surface area (A_min), Gibbs energy of micellization (ΔG_mic), and adsorption (ΔG_ad) processes in the aqueous. The biodegradability of the prepared surfactants was tested in river water using the die-away method. Petroleum-collecting and petroleum-dispersing capacities of the synthesized compounds on the surface of water of varying mineralization degree have been studied.     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

A study of the surface analysis of some water‐soluble polymers by inverse gas chromatography

The surface characterization of 2‐(dimethylamino)ethylmethacrylate (DMA) and 2‐(N‐morpholino)ethylmethacrylate (MEMA) homopolymers and DMA–MEMA diblock copolymer was studied using inverse‐gas chromatography (IGC). The analyzed surface properties of (co)polymers were the dispersive component of the surface energy ( ) and the acid–base characters of (co)polymer surfaces. The specific free energy (ΔG^sp), enthalpy (ΔH^sp), and entropy (ΔS^sp) of adsorption of polar probes on (co)polymers were calculated. The values of ΔH^sp were correlated with both the donor and the modified acceptor numbers (AN) of the probes to quantify the acidic K_A and the basic K_D parameters of (co)polymer surfaces. The values obtained for the K_A and K_D parameters indicated basic characters for the surface of (co)polymers. The dispersive component values of the surface energy and the acid–base surface parameters of the DMA–MEMA diblock copolymer surface were found to be between those homopolymers as expected. Copyright © 2008 John Wiley & Sons, Ltd.     

Molecular Recognition of Pyranosides by a Family of Trimeric, 1,1′-Binaphthalene-Derived Cyclophane Receptors

The synthesis and carbohydrate-recognition properties of a new family of optically active cyclophane receptors, 1 – 3 , in which three 1,1′-binaphthalene-2,2′-diol spacers are interconnected by three buta-1,3-diynediyl linkers, are described. The macrocycles all contain highly preorganized cavities lined with six convergent OH groups for H-bonding and complementary in size and shape to monosaccharides. Compounds 1 – 3 differ by the functionality attached to the major groove of the 1,1′-binaphthalene-2,2′-diol spacers. The major grooves of the spacers in 2 are unsubstituted, whereas those in 1 bear benzyloxy (BnO) groups in the 7,7′-positions and those in 3 2-phenylethyl groups in the 6,6′-positions. The preparation of the more planar, D₃-symmetrical receptors (R,R,R)- 1 (Schemes 1 and 2), (S,S,S)- 1 (Scheme 4), (S,S,S)- 2 (Scheme 5), and (S,S,S)- 3 (Scheme 8) involved as key step the Glaser-Hay cyclotrimerization of the corresponding OH-protected 3,3′-diethynyl-1,1′-binaphthalene-2,2′-diol precursors, which yielded tetrameric and pentameric macrocycles in addition to the desired trimeric compounds. The synthesis of the less planar, C₂-symmetrical receptors (R,R,S)- 2 (Scheme 6) and (S,S,R)- 3 (Scheme 9) proceeded via two Glaser-Hay coupling steps. First, two monomeric precursors of identical configuration were oxidatively coupled to give a dimeric intermediate which was then subjected to macrocyclization with a third monomeric 1,1′-binaphthalene precursor of opposite configuration. The 3,3′-dialkynylation of the OH-protected 1,1′-binaphthalene-2,2′-diol precursors for the macrocyclizations was either performed by Stille (Scheme 1) or by Sonogashira (Schemes 4, 5, and 8) cross-coupling reactions. The flat D₃-symmetrical receptors (R,R,R)- 1 and (S,S,S)- 1 formed 1 : 1 cavity inclusion complexes with octyl 1-O-pyranosides in CDCl₃ (300 K) with moderate stability (ΔG⁰ ca. −3 kcal mol⁻¹) as well as moderate diastereo- (Δ(ΔG⁰) up to 0.7 kcal mol⁻¹) and enantioselectivity (Δ(ΔG⁰)=0.4 kcal mol⁻¹) (Table 1). Stoichiometric 1 : 1 complexation by (S,S,S)- 2 and (S,S,S)- 3 could not be investigated by ¹H-NMR binding titrations, due to very strong signal broadening. This broadening of the ¹H-NMR resonances is presumably indicative of higher-order associations, in which the planar macrocycles sandwich the carbohydrate guests. The less planar C₂-symmetrical receptor (S,S,R)- 3 formed stable 1 : 1 complexes with binding free enthalpies of up to ΔG⁰=−5.0 kcal mol⁻¹ (Table 2). With diastereoselectivities up to Δ(ΔG⁰)=1.3 kcal mol⁻¹ and enantioselectivities of Δ(ΔG⁰)=0.9 kcal mol⁻¹, (S,S,R)- 3 is among the most selective artificial carbohydrate receptors known.     

Syntheses,Crystal Structures,and Thermal Properties of Energetic Semicarbazide Salt,Manganese(II) Salt,and Coordination Compound of 3,5‐Dinitrobenzoic Acid

Nitro compounds have been actively researched as driven by their potential to be high‐performing energetic materials. Herein, three new nitro compounds including semicarbazide 3,5‐dinitrobenzoate, (SCZ)(DNBA), manganese 3,5‐dinitrobenzoate dihydrate, [Mn(DNBA)₂(H₂O)₂]_n, and bis(semicarbazide) manganese(II) 3,5‐dinitrobenzoate, Mn(SCZ)₂(DNBA)₂, were synthesized and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. The results indicated that the above mentioned compounds are ionic, polymeric, and molecular in nature, respectively. Moreover, their thermal decomposition properties were assessed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their non‐isothermal reaction kinetics parameters, critical temperature of thermal explosion (T_bp), entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) of the exothermic decomposition process were also calculated. Results suggest that there was a relationship between the structure and thermal stability.     

Transesterification Kinetics Investigation of R‐Substituted Phenyl Benzoates with 4‐Methoxyphenol in the Presence of K2CO3 in DMF

Transesterification of R‐substituted phenyl benzoates 1–5 with 4‐methoxyphenol 6 was kinetically investigated in the presence of K₂CO₃ in dimethylformamide (DMF) at various temperatures. The Hammett plots for the reactions of the 1–5 demonstrate good linear correlations with σ⁰ constants. Low magnitude of ρ_LG values indicate that the leaving group departure occurs after the rate‐determining step. The Brønsted coefficient values for the reactions (?0.2, ?0.16, ?0.13 at 15, 24, 36°C, respectively) demonstrate the weak effect of leaving group substituent on the reactivity of R‐substituted phenyl benzoates 1–5 for the reactions with 4‐methoxyphenol 6 in the presence of K₂CO₃ in DMF. The leaving group substituent effect on free energy (ΔG^≠), enthalpy (ΔH^≠), and entropy (ΔS^≠) of activation was examined. It was shown that the activation parameters obtained depend weakly on the leaving group substituent effect. The reaction is entropy controlled in case the leaving group substituent becomes electron withdrawing.     

Thermodynamic investigation of methyl salicylate/1-pentanol binary system in the temperature range from 278.15 K to 303.15 K

Densities (ρ), speeds of sound (u), isentropic compressibilities (k_s), refractive indices (n_D), and surface tensions (σ) of binary mixtures of methyl salicylate (MSL) with 1-pentanol (PEN) have been measured over the entire composition range at the temperatures of 278.15 K, 288.15 K, and 303.15 K. The excess molar volumes (V^E), excess surface tensions (σ^E), deviations in speed of sound (Δu), deviations in isentropic compressibility (Δk_s), and deviations in molar refraction (ΔR) have been calculated. The excess thermodynamic properties V^E, σ^E, Δu, Δk_s, and ΔR were fitted to the Redlich–Kister polynomial equation and the A_k coefficients as well as the standard deviations (d) between the calculated and experimental values have been derived. The surface tension (σ) values have been further used for the calculation of the surface entropy (S^S) and the surface enthalpy (H^S) per unit surface area. The lyophobicity (β) and the surface mole fraction $(x_2^{\text{S}})$ of the surfactant component PEN have been also derived using the extended Langmuir model. The results provide information on the molecular interactions between the unlike molecules that take place at the surface and the bulk.