Kinetics and mechanism of osmium (VIII) and ruthenium(III) catalyzed oxidation of aliphatic amines by chloramine-T in alkaline and perchloric acid media

The kinetics of oxidation of aliphatic amines viz., ethylamine, n-butylamine, isopropylamine (primary amines), diethylamine (secondary amine), and triethylamine (tertiary amine) by chloramine-T have been studied in NaOH medium catalyzed by osmium (VIII) and in perchloric acid medium with ruthenium(III) as catalyst. The order of reaction in [Chloramine-T] is always found to be unity. A zero order dependence of rate with respect to each [OH^?] and [Amine] has been observed during the osmium(VIII) catalyzed oxidation of diethylamine and triethylamine while a retarding effect of [OH^?] or [Amine] on the rate of oxidation is observed in case of osmium(VIII) catalyzed oxidation of primary aliphatic amines. The ruthenium(III) catalyzed oxidation of amines follow almost similar kinetics. The order of reactions in [Amine] or [Acid] decreases from unity at higher amine or acid concentrations. The rate of oxidation is proportional to {k′ and k″ [Ruthenium(III)] or [Osmium(VIII)]} where k′ and k″ (having different values in case of ruthenium(III) and osmium(VIII)) are the rate constants for uncatalyzed and catalyzed path respectively. The suitable mechanism consisting with the kinetic data is proposed in each case and discussed.     

Grafting onto wool. VIII. Graft copolymerization of methyl methacrylate (MMA) by use of Ce4+ -amine system as redox initiator

In an attempt to determine the role of a variety of amines in ceric-ion-initiated grafting, poly-(methyl methacrylate) was graft copolymerized onto Himachali wool in the presence of a variety of amines that included ammonia, diethylamine (DEA), dipropylamine (DPA), triethylamine (TEA), triethanol amine, and pyridine. All amines (with the exception of DEA) reduced the percent grafting. The reactivity of various amines toward graft copolymerization followed the order: DEA > DPA > NH₃ > TEA > triethanol amine > Py. An explanation based on the basicity, nucleophilicity, and steric requirement of amines is given to explain the observed reactivity order shown by the various amines toward graft copolymerization.     

Kinetics and mechanism of the amine exchange reactions of 2-aminopyridine derived Schiff-base ligands and their copper(II) complexes

The kinetics and product analyses of the amine exchange reactions of two 2-aminopyridine derived Schiff-base ligands and their monomeric bischelate and dimeric copper(II) complexes have been studied. The Schiff-base ligands investigated underwent amine exchange reactions with n-butyl, cyclohexyl, t-butyl amines. The coordination of the Schiff-base ligands to copper(II) rendered the amine exchange reactions slower. With n-butyl and cyclohexyl amines, parallel first- and second-order terms on their concentrations are observed for the amine exchange reactions of copper(II) bischelates and dimer. The kinetic data favor a mechanism involving a rate-limiting elimination of 2-aminopyridine from a diaminoacetal intermediate in preference to a scheme in which a dissociation of the complexes into free ligands and Cu(II) may precede the amine exchange. The steric factors influence the amine exchange reactions of Cu(II) bischelates with the bulkier amines reacting slower as given by the order t-butylamine (3.3 ± 0.3 × 10^?3 dm³/mol·s) < cyclohexylamine (0.2 ± 0.03 dm³/mol·s) < n-butylamine (2.2 ± 0.2 dm³/mol·s). The bulkiness of the t-butyl group and the constraints imposed by the changes in the coordination geometry of Cu(II) on amine exchange not only render the reactions of Cu(II) bischelates slower but also make the formation of the mixed adduct ([N-(5-methyl)-2-pyridyl salicylaldimine][N-t-butyl salicylaldimine] Cu(II)) more favored.     

Polyimides derived from bismethylolimides. II. Polyamine-imides from bismethylolimides and diamines

Compounds in the N-methylolimide group reacted smoothly with amines in the presence of water to yield the corresponding condensation products. Polycondensations of bismethylolimides, N,N′-bismethylolpyromellitic diimide, and N,N′-bismethylolbenzophenonetetracarboxylic diimide, with amines such as aromatic diamines, piperazine, and n-butylamine, were carried out in DMAc that contained 1% water to produce linear polyamine-imides. The polyamine-imides assumed various colors, from very pale yellow to deep purple, and had inherent viscosities in the 0.07–0.37-dl/g range. Most of these polymers were soluble in polar solvents such as DMAc and DMSO. The thermal stability of the polymers was examined by thermogravimetric analysis; decomposition started at 210–350°C and weight residue at 500°C was 22–85% in air.     

Catalysis in competing isocyanate reactions. I. Effect of organotin–tertiary amine catalysts on phenyl isocyanate and N-butanol reaction

An analytical method based on high performance liquid chromatography (HPLC) has been developed to investigate the competing isocyanate reactions under the influence of various catalysts. The kinetics of the model reaction between phenyl isocyanate and n-butanol was studied in acetonitrile at 50°C. Effects of various catalysts such as an organotin compound, dibutyltin dilaurate, and tertiary amines, 1,4-diazabicyclo-(2,2,2)octane,N,N′,N″-pentamethyldiprophylene triamine,N,N′N″-tris(3-dimethyl-aminopropyl)-3-hexahydrotriazine, and N,N,N′-trimethylaminoethyl-ethanolamine on the reaction rate and the formation of reaction products were investigated. The reactions were followed by determining the NCO disappearance using the standard di-n-butylamine back-titration method as well as measuring the formation of various reaction products using the HPLC method. The relative specificity of a catalyst in isocyanate reactions can thus be determined from the profile of the model reaction which depends upon the structure of the catalyst employed.     

Facile synthesis of poly(l‐tryptophan) through polycondensation of activated urethane derivatives

A facile and phosgene‐free synthetic route to poly(l ‐tryptophan) 2 by the polycondensation of N‐phenoxycarbonyl‐l ‐tryptophan 1 is described. The monomer 1 was synthesized via the carbamylation of tetrabutylammonium salt of L‐tryptophan with diphenyl carbonate. The polycondensation proceeded smoothly at 60 °C in N,N‐dimethylacetamide in the presence of amines (n‐butylamine, diethylamine, and triethylamine) along with the elimination of phenol and carbon dioxide. The structural analysis of the obtained 2 by Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry revealed that n‐butylamine or diethylamine was successfully incorporated into the chain end of the polypeptide. Furthermore, we have demonstrated the synthesis of a diblock copolymer by utilizing amine‐terminated poly(ethylene glycol) as a source of the polyether segment. The chain length of the polypeptide segment was controlled by varying feed ratio between 1 and the amino group of poly(ethylene glycol). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4565–4571     

Polyimides derived from bis-N-hydroxyimides. II. Synthesis and properties of polyimide-esters

Polycondensation of bis-N-hydroxyimides, N,N′ dihydroxypyromellitic diimide, and N,N′ -dihydroxybenzophenonetetracarboxylic diimide with dicarboxylic acid chlorides was carried out in dimethylacetamide in the presence of triethylamine to produce novel polyimide-esters. The resulting polymers had inherent viscosities up to 0.27 dl/g. These polyimide-esters and model compounds exhibited high reactivity toward nucleophiles such as aniline and n-butylamine, which brought about rapid reductions in the viscosity of the polymers. These polymers were fairly resistant to organic solvents but soluble in m-cresol. Thermal stability oft he polyimide-esters was evaluated by thermogravimetry and their good heat-resistant properties were confirmed.     

Quenching of O2(1Δg) by aliphatic amines

The quenching rate constants of O₂(¹Δ_g) with n-butylamine, diethylamine, dipropylamine, dibutylamine, and tripropylamine have been determined in a discharge flow system. The rate constants are found to be (1.6 ± 0.2) × 10³, (8.5 ± 0.6) × 10⁴, (9.8 ± 0.5) × 10⁴, (2.1 ± 0.1) × 10⁵, and (8.6 ± 0.5) × 10⁵ 1 mol^?1 s^?1, respectively. The rate constants are found to increase in the order, tertiary amine → secondary amine → primary amine. The “inductive effect” of alkyl substitution is also found to increase the rate constant in a given series of amines.     

Decomposition of zinc (1-hydroxyethylidene)diphosphonate induced by aliphatic amines and ammonia. Molecular structures of ammonium (1-hydroxyethylidene)diphosphonates

A suspension of sparingly soluble zinc (1-hydroxyethylidene)diphosphonate ZnH₂L?2H₂O (H₄L = MeC(OH)[P(O)(OH)₂]₂) is rapidly transformed into an aqueous solution when treated with ammonia or aliphatic amines (hexamethylenediamine, triethylamine, tert-butylamine, di-n-butylamine) containing no hydrophilic groups ?OH and ?(OCH₂CH₂)_n?. The dissolution effect is due to the decomposition of the coordination polymer giving ammonium derivatives. Dehydrated dry powders of the corresponding ammonium compounds based on triethylamine, tert-butylamine, or di-n-butylamine rapidly dissolve in water to form transparent colorless solutions, whereas hexamethylenediamine and ammonia derivatives are poorly soluble. (1-Hydroxyethylidene)diphosphonic acid forms ammonium salts with hexamethylenediamine, triethylamine, and tert-butylamine. The molecular structures of these compounds are considered.

     

Viscosity of Aqueous Solutions of n-butylamine,sec-butylamine and tert-butylamine

Abstract

Viscosities of the systems, water (W) + n-butylamine (NBA), W + sec-butylamine (SBA) and W + tert-butylamine (TBA) have been measured in the temperature range 298.15–323.15K. The viscosities (η) and excess viscosities (η^E) have been plotted against mole fraction of amines (X ₂). On addition of amines to water, viscosities first increase rapidly, then pass through maxima at 0.2 mole fraction of amines and then decline continuously as the addition of amines is continued. η^E show large positive values, with maxima also at 0.2 mole fraction of amines. The maxima of the curves of η and η^E vs. mole fraction of butylamines follow the order, W + TBA > W + SBA > W + NBA. The ascending part of the η vs. X ₂ curves in the water-rich region is explained by the hydrophobic hydration caused by the hydrocarbon tails and the hydrophilic effect due to — NH₂ group of amines. Following the maxima, amine - amine association is preferred, which accounts for the steady decrease of viscosity up to the pure state of amines.     

Charge-transfer complexes as polymerization inhibitors. I. Amine–chloranil complexes as inhibitors for the radical polymerization of methyl methacrylate

Charge-transfer complexes of N,N-dimethylaniline (DMA) and triethylamine (TEA) with chloranil have been investigated as inhibitors for the sensitized polymerization of methyl methacrylate (MMA) in bulk and in solution. Complete inhibition is achieved by the complexes of both amines followed by retardation only in case of DMA. The higher inhibiting efficiency of the TEA complexes is attributed to their greater stability. The polymers formed in the presence of chloranil alone or its complexes with both amines are quinonoid and contain no combined nitrogen. The results support the idea that inhibition reaction involve electron transfer from the growing chains to the quinone, with formation of molecular complexes of polymeric cations and semiquinone anions. The latter are the actual inhibiting species, so that the efficiency of inhibiting depends on their concentration, which is determined by the stability of the molecular complexes formed. The inhibition reactions should accordingly be considered as oxidation–reduction processes in which the growing chains are the electron donors. The suggested mechanism affords an explanation for the great differences in the inhibiting power of a particular quinone for the polymerization of different monomers.     

Charge transfer polymerization of 2-vinyl pyridine initiated by n-butyl amine and carbon tetrachloride

2-Vinyl pyridine (2-VP) can be initiated by a charge-transfer complex formed by the interaction of aliphatic amines such as n-butylamine (nBA) and carbon tetrachloride (CCl₄) in a solvent like NN-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). This article describes the polymerization of 2-VP by n-butylamine (nBA) in the presence of carbon tetrachloride in DMSO at 60°C. The rate of polymerization R_p increases rapidly with carbon tetrachloride (CCl₄) up to a concentration of 3.93 mol/L, but for a higher concentration it is almost independent of the carbon tetrachloride concentration; R_p is proportional to [nBA]^0.5 and [2-VP]^1.5 when [CCl₄]>[nBA]. The average rate constant k is 1.03 × 10^?5 L/mol s. When [CCl₄] < [nBA] the rate constant in terms of [2-VP] was 1.06 × 10^?5 s^?1 at 60°C and the overall rate constant was 1.035 × 10^?5 L/mol s at 60°C.     

Pyrimidines. 8. chlorination of 6-methyluracil with phosphorus oxychloride in the presence of trialkyamines

The effect of the tertiary amines triethyl, tri-n-propyl, and tri-n-butylamines on the chlorination of 6-methyluracil by phosphorus oxychloride was studied. A comparison with the reaction of preformed 2,4-dichloro-6-methylpyrimidine and triethylamine in toluene was made. The reaction in phosphorus oxychloride in the presence of triethylamine afforded low yields of 2-diethylamino derivative after short heating periods and high yields of the 2,4-bis(diethylamino) derivative after 188 hours of boiling. Heating the preformed 2,4-dichloro-6-methylpyrimidine in toluene in the presence of triethylamine yielded primarily the 2-diethylaminopyrimidine along with a small amount of the 4-diethylamino isomer. After 188 hours, the product mixture was composed of 87% 2-diethylamino and 13% of 4-diethylamino isomers. Although substituent orientation was essentially the same, the yields of products seem to have been influenced by the dielectric constants of the solvents. Tri-n-propylamine in phosphorus oxychloride yielded solely the dichloropyrimidine, even after 188 hours of boiling, and is recommended as the amine of choice in such chlorination reactions. Tri-n-butylamine was the same after 48 hours, but 4% of 4-di-n-butylaminopyrimidine was found after 188 hours of heating.     

The kinetics of proton transfer from octaphenylsubstituted tetraazaporphyrin to organic bases in benzene

The acid-base interaction of octa(m-trifluoromethylphenyl)tetraazaporphin with pyridine, 2-methylpiridine, morpholine, benzylamine, piperidine, n-butylamine, diethylamine, tert-butylamine, and triethylamine in benzene was studied. It was found that intermolecular transfer of spatially screened NH-group protons from octa(m-trifluoromethylphenyl)tetraazaporphin to morpholine, benzylamine, piperidine, n-butylamine, and tert-butylamine is characterized by unusually low values of rate constants. The effect of the structure of octa(m-trifluoromethylphenyl)tetraazaporphin, octa(n-bromophenyl)tetraazaporphin, octa(n-bromophenyl)tetraazaporphin, and octa(n-nitrophenyl)tetraazaporphin, and the nature of a base on the kinetic parameters of acid-base equilibrium is shown. A structure for complexes with proton transfer of octaphenylsubstituted tetraazaporphirins is suggested. It is revealed that they are subject to decomposition over time with the formation of low molecular colorless products.     

Excess Molar Volumes of Aqueous Solutions of Butylamine Isomers

Abstract

Excess molar volumes (V^E ) and average thermal expansivities (α) of the systems, water (W) + n-butylamine (NBA), W + sec-butylamine (SBA), and W + tert-butylamine (TBA), have been calculated from the density data at temperatures ranging from 298.15–323.15 K. The V^E and α values have been plotted as functions of mole fraction of amines. The systems show large negative excess volumes, magnitude of which varies in the order, W + TBA > W + SBA > W + NBA. The curves are found to be symmetrical along the composition axis, with minima occurring at 0.5 mole fraction of butylamines. The negative excess volumes have been interpreted primarily by two effects: (i) strong chemical interaction leading to the formation of 1:1 complexes through H-bonding and (ii) hydrophobic hydration causing significant contraction of volume.     

New high-yield,one-step synthesis of polyglycolide from haloacetic acids

In a new, one-step synthesis, polyglycolide was prepared by the reaction of bromo- or chloroacetic acid with triethylamine in a nitromethane solution. It was discolored, by iodoacetic acid possibly as a result of iodine formed by the decomposition of triethylammonium iodide. The structure of polyglycolide was characterized by hydrolysis, ¹H-NMR and IR spectra, and x-ray powder diffraction, which indicated partial crystallinity. A mechanism is proposed for the formation of polyglycolide. A lower limiting value of the number-average molecular weight of 10⁴ was determined by cryoscopy in 1,3-dinitrobenzene for polyglycolide prepared from bromoacetic acid; the measurement was inaccurate because of the low solubility of the polymer. No significant effect of solvent (acetone, ether, or chloroform) on yield or melting point was observed; a higher yield was obtained in nitromethane. The polymer obtained with tri-n-propylamine and bromoacetic acid had properties similar to that obtained with triethylamine. No polymer was obtained with N,N-dimethylaniline and bromoacetic acid or with triethylamine and bromoacetic acid in aqueous solution.     

Mechanistic studies of carbonate macrocyclization

The kinetics of phenylchloroformate (PCF) reactions have been used to model some of the key chemical events in carbonate macrocyclization. Three reactions have been studied using stopped-flow FT-IR spectroscopy: formation of acyl ammonium salt from PCF and three different trialkylamines, the conversion of acyl ammonium salt to urethane, and the condensation reaction between acyl ammonium salt and 4-isopropylphenol. The rate dependence was studied for triethylamine (TEA), diethylmethylamine (DEMA) and tri-n-butylamine (TBA) at 0°C in anhydrous CH₂Cl₂. The reactivity order for acyl ammonium salt formation for TBA: TEA: DEMA is 1 : 2.7 : >444. By contrast, condensation and urethane formation are not sensitive to the structure of the amine. The rate of condensation is comparable to the rate of acyl ammonium salt formation for TEA and TBA, while the rate of urethane formation is the slowest process for all three amines. These results are consistent with the view that the yield of macrocyclic polycarbonates is related to the concentration of the acyl ammonium salt. The optimum amine concentration for obtaining high yields of cyclics varies with the amine structure and parallels the difference in the rates of acyl ammonium salt formation. © 1994 John & Sons, Inc.     

Vinyltetrazoles: II. Synthesis of 5-substituted 1(2)-vinyltetrazoles

5-R-Substituted 1(2)-vinyltetrazoles (R = Ar, Alk, CH₂=CH, NH₂, H) were synthesized by alkylation of 5-R-tetrazoles with 1,2-dibromoethane in the presence of triethylamine in acetonitrile, followed by elimination of triethylamine hydrobromide. Vinylation of dinuclear substrates, such as bis(1H-tetrazol-5-yl)-methane and 1,3-bis(1H-tetrazol-5-yl)benzene, under analogous conditions gave the corresponding N ¹,N ^2′- and N ²,N ^2′-divinyl derivatives.     

Determination of one-bond 14N?13C coupling constants in amines using 13C T1ρ measurements

¹³C T_1ρ values measured for isobutylamine, diethylamine, pyrrolidine, piperidine and triethylamine yield one-bond ¹⁴N? ¹³C coupling constants and ¹⁴N spin-lattice relaxation times. A decrease of ¹J(¹⁴N¹³C) was observed in sterically hindered secondary amines.     

A Model for the Cobalamin-Dependent Methionine Synthase

The acid-catalyzed transfer of a Me group from N,N-dimethylaniline ( 6 ) to vitamin-B₁₂-derived Co^I complexes 2a , b was realized (Scheme 3). Hexane-1-thiol ( 8 ) was methylated by the methylcobalt complexes 4a , b in the presence of pyridine. Conditions for the complete cycle, i.e., Me transfer from 6 to 8 with Co^I complexes acting as a nucleophile and a nucleofuge have been established. The importance of Zn²⁺ as activating agent and of the basicity of tertiary amines for the Me transfer has been investigated.