Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Calix[8]arene-based glycoconjugates as multivalent carbohydrate-presenting systems

An efficient approach for the introduction of eight mono- or disaccharide sugar moieties (d-glucose, N-acetyl-d-glucosamine, d-galactose, l-fucose, d-maltose and d-cellobiose) at the upper rim of calix[8]arene 1, using thioureido linkers, is reported. The obtained water-soluble, nanosized glycocalix[8]arenes 5b-10b may act as biomimetic carbohydrate systems and as hosts for highly polar organic molecules. Preliminary ¹H NMR complexation experiments of octaglycosyl derivative 7b and 10b with ionic guests are also reported.     

Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

Multiple catenanes based on tetraloop derivatives of calix[4]arenes

Four novel tetraarylurea calix[4]arenes (4a-d) have been synthesized, substituted by ω-alkenyloxy residues in 3,5-positions of the arylurea residues. The eight alkenyl groups were pairwise connected by olefin metathesis and subsequent hydrogenation. The ring-closure reaction was carried out with heterodimers exclusively formed by 4 with a tetratosylurea calix[4]arene 1, which serves as a template in this reaction step. The potential trans-cavity bridging is entirely suppressed in this way. Bis- and tetraloop calix[4]arenes cannot form dimers due to overlapping loops. However, they readily form heterodimers with open-chain tetraureas, as long as their urea residues can pass through the loops. Thus, five heterodimeric capsules 8a-e with bis[3]catenane structure were synthesized using again the olefin metathesis followed by hydrogenation. Two different strategies were compared for this reaction sequence, starting with heterodimers formed either by tetraloop derivatives 5 with tetraalkenyl tetraureas 6 (pathway A) or by bisloop derivatives 7 with octaalkenyl tetraureas 4 (pathway B). A distinct advantage of one of these pathways was not observed; the bis[3]catenanes were obtained with yields of 20-60%. Heterodimers formed by tetraloop derivatives 5b-d and octaalkenyl ureas 4b-d were converted analogous to three novel cyclic [8]catenanes 9a-c in 30-42% yield. The structure of the novel catenanes was unambiguously proved by ¹H NMR and ESI MS, and for 8a and 9a additionally by single crystal X-ray analysis.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Fullerene encapsulation with calix[5]arenes

This paper presents the synthesis of the fullerene hosts based on the calix[5]arenes and their binding properties. Calix[5]arenes 1a, 2, 3a bind C₆₀ or C₇₀ in organic solvents. The solvent effect of the fullerene complexation was clearly observed; the association constant decreases in a solvent with high solubility for C₆₀. Covalently linked double-calix[5]arenes 4-6 were also investigated on their binding properties for fullerenes in organic solvents. Their binding abilities for both C₆₀ and C₇₀ are extremely high in toluene solution. Higher binding selectivity toward C₇₀ is observed by all the double-calix[5]arenes. The selectivity of 5a toward C₇₀/C₆₀ is highest in toluene with a value of 10. The structures of the supramolecular complexes of the calix[5]arene hosts and C₆₀ or C₇₀ were investigated by using ¹H and ¹³C NMR studies. The molecular mechanics calculation and X-ray structure reveal that the interior of the calix[5]arene is complementary to the exterior of C₆₀ molecule. In contrast, the host-guest complexes of C₇₀ with the simple calix[5]arenes take many conformational options due to its less symmetric shape. The molecular mechanics calculation and our chemical shift simulation nicely worked to estimate the reliable structures; the calix[5]arene cavity takes up C₇₀ molecule, and the C₇₀ molecule tilts significantly from the C5 axis of the calix[5]arene. In the case of the host-guest complex of C₇₀ with the double-calix[5]arene, the molecular dynamics simulation of the host-guest complex represented the realistic movement of the bound C₇₀ inside the cavity. The combination of the molecular dynamics simulation and the chemical shift simulation of the host-guest complex suggested that the C₇₀ molecule rapidly moves inside the cavity.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Syntheses of two diamine substituted 1,3-distal calix[4]arene-based magnetite nanoparticles for extraction of dichromate, arsenate and uranyl ions

The synthesis of two new calixarene derivatives 4 and 5, functionalized at the lower rim with 4-amino-1-benzylpiperidine to give diamide and diamine derivatives of p-tert-butylcalix[4]arene, is described. They were obtained by the reaction of both the diester derivative of p-tert-butylcalix[4]arene (2) and the dialkyl bromide derivative of p-tert-butylcalix[4]arene (3) with 4-amino-1-benzylpiperidine. The ¹H NMR spectra of calixarene derivatives show that 4 and 5 exist in the cone conformation. Moreover, these diamide and diamine derivatives of p-tert-butylcalix[4]arene (4 and 5) have been immobilized onto [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane-modified Fe₃O₄ magnetite nanoparticles to obtain calixarene-based magnetic nanoparticles M-DADBP-Calix (6) and M-DABP-Calix (7). The calix[4]arene immobilized materials were characterized by a combination of Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Thermogravimetric Analyses (TGA) and elemental analysis. Additionally, the studies regarding the removal of As(V)/Cr(VI) ions as well as U(VI) ion from aqueous solutions were also carried out by using these compounds in liquid-liquid/solid-liquid extraction experiments.     

CMPO-substituted calix[6]- and calix[8]arene extractants for the separation of An/Ln from radioactive waste

Three calix[6]arene derivatives (1a-c) and two calix[8]arene derivatives (2a,b), with six and eight CMPO residues, respectively, attached to the narrow/lower rim via ether links, were synthesised. Preliminary liquid-liquid extraction studies for Eu(III) and Am(III) from aqueous nitric acid to o-nitrophenylhexyl ether reveal remarkable properties with respect to efficiency and selectivity, especially for the tert-butylcalix[6]arene derivative with a -(CH₂)₃- spacer.     

Complexation thermodynamics of water-soluble calix[4]arene derivatives with lanthanoid(III) nitrates in acidic aqueous solution

Microcalorimetric titrations have been performed in acidic aqueous solution at 25 °C to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 complexation of lanthanoid(III) nitrates (La-Gd, Tb) with 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)calix[4]arene (2) and 5,11,17,23-tetrasulfonato-thiacalix[4]arene (3). Using the present and previous reported data on water-soluble calix[4]arenesulfonates (1) and structurally related analogues 2 and 3, the complexation behavior is discussed comparatively from the thermodynamic point of view. Possessing four carboxyls at the lower rim of parent calix[4]arenesulfonate (1), the derivative 2 displays the enhanced binding abilities for Sm³⁺. As compared with 1 and 2, p-sulfonatothiacalix[4]arene (3) gives not only the lower binding constants for all of lanthanoid(III) ions but also lower cations selectivity. Thermodynamically, the resulting complexes of lanthanoid(III) ions with 1 and its derivatives 2 and 3 is absolutely entropy-driven in aqueous solution, typically showing larger positive entropy changes. These larger positive entropy changes (TΔS°) and somewhat smaller positive enthalpy changes (ΔH°) are directly contributed to the complexes stability as a compensative consequence.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Synthesis of calix[4]arene(amido)monocrowns and their photoresponsive derivatives

A series of new calix[4]arene(amido)mono-crown compounds have been synthesized through aminolysis of calix[4]arene esters and intramolecular cyclization of the intermediates. The title compounds were converted into their nitro and azo substituted derivatives to provide novel photoresponsive molecular receptors for transition metal ions. Single crystal X-ray analysis of calix[4]arene(ethyleneamido)mono-crown (2a) revealed that the compound is present in a cone conformation with an amido loop that caps the lower rim of calix[4]arene cavity to result in stacking along axis a and axis c to provide supramolecular aggregates in the solid state. Evaluation of synthesized macrocycles in the solution phase for recognition of transition metal cations (Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Pb²⁺, Hg⁺, Hg²⁺, Pd²⁺, and Pt²⁺) by UV-visible spectroscopy revealed that p-tert-butyl-calix[4]arene mono-(amidocrown) 1c selectively shows a blue shift at 38 nm on interaction with Hg⁺ ions.     

Synthesis, structure and anion binding properties of lower rim α-hydroxyamide calix[4]arene derivatives

A new family of p-tert-butylcalix[4]arenes functionalized at the lower rim with α-ketoamide or α-hydroxyamide functions has been prepared. The ¹H and ¹³C NMR spectra indicate that the macrocycles preferably adopt a cone conformation. X-ray crystal study of the α-ketoamide derivative 4a shows the flattened cone conformation in the solid state. Reduction of α-ketoamide 4ab has produced the α-hydroxyamide derivatives 6ab. The introduction of chiral moieties on the lower rim position of the calix[4]arene allowed the synthesis of the chiral derivatives 7 and 8. Host-guest complexation properties towards various anions of the chiral α-hydroxyamide 8 have been examined by ¹H NMR spectroscopy. This new receptor has shown promising selectivity for and N-tosyl-(L)-alaninate.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.