Liquid–liquid extraction of palladium(II) and gold(III) with N-benzoyl-N′,N′-diethylthiourea and the synthesis of a palladium benzoylthiourea complex

N-Benzoylthioureas have been reported to form complexes with gold (III) and palladium (II) and other transition metals. In this study, an N-benzoyl-N′,N′-diethylthiourea (3f) ligand was used in the solvent extraction of palladium(II) and gold(III) from aqueous chloride media (0.1 mol l−1 NaCl). The distribution coefficient was determined as a function of both metal concentration in the aqueous phase and extractant concentration in the organic phase. The experimental distribution data were numerically analysed by letagrop-distr software in order to obtain the thermodynamic model corresponding to the metal extraction. It is found that pH does not affect the metal extraction process in the 1–2 pH range. Synthesis of the palladium benzoyl thiourea complexes was carried out by mixing quantities of metal and ligand solutions in methanol in a 1:2 ratio stoichiometric. Yields of 74 and 80.9% were obtained for the Pd-3c and Pd-3f complexes. In order to confirm the formation of the palladium complexes, NMR, FTIR and MS analyses were performed. From MS analyses a complex stoichiometry 1:2 (metal:ligand) was confirmed. The formation of crystals of palladium N-benzoyl-N′,N′-diethylthiourea complex (Pd-3f) in the methanolic solution allows the characterisation of the complex structure by XRD. The resulting structure is described and discussed. Bis(1,1,-diheptadecyl-3-benzoyl-thioureate)palladium(II) (Pd-3c) and bis(1,1,-diheptadecyl-3-benzoyl-thioureate)palladium(II) (Pd-3f) were used as ionophores in polymeric membrane electrodes. Their potentiometric responses to different anionic metal chlorocomplexes are evaluated and discussed taking into consideration the results obtained in the liquid–liquid distribution studies. A nernstian response was only obtained for AuCl4 − (PDL=8.8×10−8) and PdCl4 2− (PDL=1.5×10−4 M) with a selectivity coefficient of KAuCl4-, PdCl42−pot=−3.4, calculated taking AuCl4 − as being the primary anion.     

Synthesis and reactivity of rhodium(III) pentamethylcyclopentadienyl complexes of N-B-PTA(BH3): X-ray crystal structures of [CpRhCl2{N-B}-PTA(BH3)] and [CpRh{N-B-PTA(BH3)}(η-CH2 = CHPh)]

The reaction between 1-boranyl-1,3,5-triaza-7-phosphaadamantane ligand N-B-PTA(BH₃) and [Cp^∗RhCl(μ-Cl)]₂ affords [Cp^∗Rh{N-B-PTA(BH₃)}Cl₂] (3) or [Cp_∗Rh{N-B-PTA(BH₃)}₂Cl]Cl (5) containing one or two P-bonded boronated PTA ligands. The hydride [Cp_∗Rh{N-B-PTA(BH₃)}H₂] (8) was also obtained by reaction of 3 with NaBH₄ and alternatively by direct hydroboration of [Cp^∗Rh(PTA)Cl₂] with excess NaBH₄. Moderately slow hydrolysis of the N-boranyl rhodium complexes affords dihydrogen, H₃BO₃ and the corresponding PTA derivatives, including the water-soluble dihydride [Cp^∗Rh(PTA)H₂] (9). Finally, the reaction of 8 with electron poor alkynes gives the alkene complexes [Cp^∗Rh{N-B-PTA(BH₃)}(η²-CH₂ = CHR)] (R = Ph, 10; C(O)OEt, 11) as a mixture of rotamers η²-coordinated to rhodium without affecting the N-BH₃ moiety. The X-ray crystal structures of 3 and 10 were also obtained and are here discussed.     

The influence of N-alkylation and chain length in the coordination ability of diamines towards silver(I) in dimethylsulfoxide

The thermodynamic functions for the complexation of Ag(I) by the following diamines: N,N-dimethyldiethylenediamine (N,N-dmen), N,N-dimethyl-1,3-propanediamine (N,N-dmtn) and N,N,N′,N′-tetramethyl-1,3-propanediamine (tmtn) have been determined in dimethylsulfoxide (dmso) by potentiometric and calorimetric techniques at 298 K and 0.1 mol dm⁻³ ionic strength (NEt₄ClO₄). Only mononuclear complexes are formed (AgL_j ⁺, j=1, 2) where the ligands act as monodentate or chelate agents. All the complexes are enthalpy stabilized whereas the entropy changes counteract the complexation. The different basicities and steric requirements of both the ligands and complexes formed together with the size of the chelate rings are taken into account to discuss the results presented here.     

Ruthenium(III) complexes with modified nucleobases: N-Substituted adenines

New chlorido-dimethylsulfoxide-ruthenium(III) complexes with different N⁶-substituted adenines have been prepared and characterized. Three ruthenium complexes have been structurally characterized by X-ray diffraction crystallography: [Ru^IIICl₄(DMSO)[H-(N⁶-pentyladenine)]] (1), [Ru^IIICl₄(DMSO)[H-(N⁶-hexyladenine)]] (2) and [Ru^IIICl₄(DMSO)[H-(N⁶,N⁶-dibutyladenine)]] (3). In all cases ruthenium ion show octahedral geometry coordinated to four chlorido ligands and one S coordinated sulfoxide (DMSO). The coordination sphere is completed by an adenine moiety coordinated to Ru(III) via N(9) and protonated at N(3). Other similar complexes have been obtained with N⁶-propyladenine, [Ru^IIICl₄(DMSO)[H-(N⁶-propyladenine)]] · 0.5EtOH (4) and N⁶-benzylaminopurine (BAP) [Ru^IIICl₄(DMSO)[H-(BAP)]] · 0.5H₂O (5) which have been spectroscopically characterized. Otherwise, in different reaction conditions, we have obtained an out sphere complex of Ru(II), [H-(BAP)][Ru^IICl₃(DMSO)₃] (6), with identical complex unit than the structurally solved [H-(creat)][Ru^IICl₃(DMSO)₃] (7) which was included for comparison purposes. Preliminary electrophoretic mobility and atomic force microscopy (AFM) studies of the interaction between Ru(III) compounds and plasmidic DNA pBR322 have been performed. These results show different morphological changes in plasmidic DNA forms.     

GC-MS Discrimination of Citrulline from Ornithine and Homocitrulline from Lysine by Chemical Derivatization: Evidence of Formation of N5-Carboxy-ornithine and N6-Carboxy-lysine

Derivatization of amino acids by 2 M HCl/CH₃OH (60 min, 80 °C) followed by derivatization of the intermediate methyl esters with pentafluoropropionic anhydride (PFPA) in ethyl acetate (30 min, 65 °C) is a useful two-step derivatization procedure (procedure A) for their quantitative measurement in biological samples by gas chromatography-mass spectrometry (GC-MS) as methyl ester pentafluoropropionic (PFP) derivatives, (Me)_m-(PFP)_n. This procedure allows in situ preparation of trideutero-methyl esters PFP derivatives, (d₃Me)_m-(PFP)_n, from synthetic amino acids and 2 M HCl/CD₃OD for use as internal standards. However, procedure A converts citrulline (Cit) to ornithine (Orn) and homocitrulline (hCit) to lysine (Lys) due to the instability of their carbamide groups under the acidic conditions of the esterification step. In the present study, we investigated whether reversing the order of the two-step derivatization may allow discrimination and simultaneous analysis of these amino acids. Pentafluoropropionylation (30 min, 65 °C) and subsequent methyl esterification (30 min, 80 °C), i.e., procedure B, of Cit resulted in the formation of six open and cyclic reaction products. The most abundant product is likely to be N⁵-Carboxy-Orn. The second most abundant product was confirmed to be Orn. The most abundant reaction product of hCit was confirmed to be Lys, with the minor reaction product likely being N⁶-Carboxy-Lys. Mechanisms are proposed for the formation of the reaction products of Cit and hCit via procedure B. It is assumed that at the first derivatization step, amino acids form (N,O)-PFP derivatives including mixed anhydrides. At the second derivatization step, the Cit-(PFP)₄ and hCit-(PFP)₄ are esterified on their C¹-Carboxylic groups and on their activated N^ureido groups. Procedure B also allows in situ preparation of (d₃Me)_m-(PFP)_n from synthetic amino acids for use as internal standards. It is demonstrated that the derivatization procedure B enables discrimination between Cit and Orn, and between hCit and Lys. The utility of procedure B to measure simultaneously these amino acids in biological samples such as plasma and urine remains to be demonstrated. Further work is required to optimize the derivatization conditions of procedure B for biological amino acids.     

Solvothermal Preparation of a Lanthanide Metal-Organic Framework for Highly Sensitive Discrimination of Nitrofurantoin and l-Tyrosine

Metal-organic frameworks (MOFs) have been rapidly developed for their broad applications in many different chemistry and materials fields. In this work, a multi-dentate building block 5-(4-(tetrazol-5-yl)phenyl)-isophthalic acid (H₃L) containing tetrazole and carbolxylate moieties was employed for the synthesis of a two-dimensional (2D) lanthanide MOF [La(HL)(DMF)₂(NO₃)] (DMF = N,N-dimethylformamide) (1) under solvothermal condition. The fluorescent sensing application of 1 was investigated. 1 exhibits high sensitivity recognition for antibiotic nitrofurantoin (K_sv: 3.0 × 10³ M⁻¹ and detection limit: 17.0 μM) and amino acid l-tyrosine (K_sv: 1.4 × 10⁴ M⁻¹ and detection limit: 3.6 μM). This work provides a feasible detection platform of 2D MOFs for highly sensitive discrimination of antibiotics and amino acids.     

4-Methoxybenzyloxymethyl group as an N-protecting group for histidine to eliminate side-chain-induced racemization in the Fmoc strategy

The 4-methoxybenzyloxymethyl (MBom) group was introduced at the N^π-position of histidine, and its utility was examined under the conditions for peptide synthesis by Fmoc strategy. The N^π-MBom group proved to prevent the risk of racemization during incorporation of the His residue and to possess all of the chemical properties required for Fmoc chemistry. The side reaction associated with formaldehyde generated from the N^π-MBom group upon acidolysis could be effectively prevented by performing the standard TFA treatment in the presence of methoxyamine·hydrochloride (MeONH₂·HCl).     

Study of kinetics of thermal degradation and to determine the activation energies of polyamides based on s-triazine

A series of ten polyamides was prepared by the high-temperature polycondensation of 4,6-bis(N-(4-(benzoylchloride)amino))-2-(N-phenyl- piperazin-1-yl)-1,3,5-triazine with different aromatic and aliphatic diamines. The synthesized polyamides were analyzed by physico-chemical properties such as solubility, density, viscosity etc. The structure of prepared polyamides was evaluated by ¹H NMR and FTIR spectrum. Thermogravimetric analysis used to study the kinetics of thermal degradation of some synthesized polyamides. Broido, Horowitz & Metzger, Coats Redfern and Chan et al. models were applied to respective thermograms to determine the activation energy (E_a). Activation energy data shows that the polyamides obtained from aromatic diamine has greater stability than the polyamides obtained from aliphatic amine.     

Enantiomer separation of rac-2,2′-dihydroxy-1,1′-binaphthyl (BNO) by inclusion complexation with racemic or achiral ammonium salts and a novel transformation of a 1:1:1 racemic complex of BNO, Me4N·Cl and MeOH into a conglomerate complex in the solid state

The complete simultaneous and mutual enantiomer resolution of 2,2′-dihydroxy-1,1′-binaphthyl (BNO) and N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH(OH)CH₂Cl·Cl⁻ into their enantiomers by inclusion complexation between their racemates in EtOH in the presence of a chiral seed crystal is reported. The enantiomer resolution of the rac-BNO was also accomplished easily by inclusion complexation with achiral ammonium salts, N-(2-hydroxyethyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH₂OH·Cl⁻ and tetramethylammonium chloride, Me₄N⁺·Cl⁻. Inclusion complexation of the rac-BNO with Me₃N⁺ CH₂CH₂OH·Cl⁻ gave only a 1:1 conglomerate inclusion complex but not a racemic complex. Recrystallization of the rac-BNO and an equimolar amount of Me₄N⁺·Cl⁻ from MeOH (7 ml) and MeOH (15 ml) gave a 1:1:1 racemic complex, BNO·Me₄N⁺·Cl⁻·MeOH and a 1:1 conglomerate complex, BNO·Me₄N⁺·Cl⁻, respectively. Novel transformation of the former racemate into the latter conglomerate occurred by heating or by exposure to MeOH vapor in the solid state.     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

Densities and refractive indices of imidazolium- and phosphonium-based ionic liquids: Effect of temperature,alkyl chain length,and anion

A systematic study of densities and refractive indices of 17 room temperature ionic liquids is presented at four different temperatures ranging from 293 K to 333 K. The ionic liquids are grouped into four families: 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide, [C_nmim][Ntf₂], ionic liquids (with n = 2, 4, 6, 8, 10, 12, and 14); 1-alkyl-3-methylimidazolium hexafluorophosphate, [C_nmim][PF₆], ionic liquids (with n = 4, 6, 8); ionic liquids based on the trihexyl(tetradecyl)phosphonium cation, [P_{6 6 6 14}], combined with the anions bis(trifluoromethylsulfonyl)amide, [Ntf₂], acetate, [OAc], and triflate, [OTf]; and [C₄mim]-based ionic liquids combined with the anions [OAc], [OTf], methylsulfate [MeSO₄], and tetrafluoroborate [BF₄]. The data obtained were analysed to determine the effect of (i) temperature, (ii) the alkyl chain length of the 1-alkyl-3-methylimidazolium cation, and (iii) the nature of the anion. Different empirical models for the calculation of the densities of the ionic liquids were tested. Molar refractions were also calculated from the volumetric and refractive index data and the values were discussed with the aim of checking their utility in obtaining insights on the intermolecular forces and behaviour in solution of the different ionic liquids.     

Preparation, structure and photoluminescence properties of Eu and Ce-doped SrYSi4N7

Undoped and Eu²⁺ or Ce³⁺-doped SrYSi₄N₇ were synthesized by solid-state reaction method at 1400-1660 °C under nitrogen/hydrogen atmosphere. The crystal structure was refined from the X-ray powder diffraction data by the Rietveld method. SrYSi₄N₇ and EuYSi₄N₇, being isotypic with the family of compounds MYbSi₄N₇ (M=Sr, Eu, Ba) and BaYSi₄N_7, crystallize with the hexagonal symmetry: space group P6₃mc (No. 186), Z=2, a=6.0160 (1) Å, c=9.7894 (1) Å, V=306.83(3) Å³; and a=6.0123 (1) Å, c=9.7869 (1) Å, V=306.37(1) Å³, respectively. Photoluminescence properties have been studied for Sr_1−xEu_xYSi₄N₇ (x=0-1) and SrY_1−xCe_xSi₄N₇ (x=0-0.03) at room temperature. Eu²⁺-doped SrYSi₄N₇ shows a broad yellow emission band peaking around 548-570 nm, while Ce³⁺-doped SrYSi₄N₇ exhibits a blue emission band with a maximum at about 450 nm. SrYSi₄N₇:Eu²⁺ can be very well excited by 390 nm radiation, which makes this material attractive as conversion phosphor for LED lighting applications.     

New Grafted Copolymers Carrying Betaine Units Based on Gellan and N-Vinylimidazole as Precursors for Design of Drug Delivery Systems

New grafted copolymers possessing structural units of 1-vinyl-3-(1-carboxymethyl) imidazolium betaine were obtained by graft copolymerization of N-vinylimidazole onto gellan gum followed by the polymer-analogous reactions on grafted polymer with the highest grafting percentage using sodium chloroacetate as the betainization agent. The grafted copolymers were prepared using ammonium persulfate/N,N,N′,N′ tetramethylethylenediamine in a nitrogen atmosphere. The grafting reaction conditions were optimized by changing one of the following reaction parameters: initiator concentration, monomer concentration, polymer concentration, reaction time or temperature, while the other parameters remained constant. The highest grafting yield was obtained under the following reaction conditions: c_i = 0.08 mol/L, c_m = 0.8 mol/L, c_p = 8 g/L, t_r = 4 h and T = 50 °C. The kinetics of the graft copolymerization of N-vinylimidazole onto gellan was discussed and a suitable reaction mechanism was proposed. The evidence of the grafting reaction was confirmed through FTIR spectroscopy, X-ray diffraction, ¹H-NMR spectroscopy and scanning electron microscopy. The grafted copolymer with betaine structure was obtained by a nucleophilic substitution reaction where the betainization agent was sodium chloroacetate. Preliminary results prove the ability of the grafted copolymers to bind amphoteric drugs (cefotaxime) and, therefore, the possibility of developing the new sustained drug release systems.     

State selected ion-molecule reactions

A summary is given of recent state selected experimental data on charge transfer in the system [N₂+Ar]⁺. New results are reported on the reaction of Ar⁺(² P _J )+N₂, obtained at Orsay by threshold photoelectron-photoion coincidence techniques employing synchrotron radiation. Recent theoretical models dealing with [N₂+Ar]⁺ charge transfer are briefly discussed in regard to their capability to account for the most characteristic experimental observations.     

Cobalt complexes of a selenium diimide and a tellurium diimide dimer

[CoCl₂{N,N′-Te₂(N^tBu)₄}] (1) was obtained in good yields by the reaction of equimolar amounts of (^tBu)NTe(μ-N^tBu)₂TeN(^tBu) and CoCl₂ in toluene under an argon atmosphere. The crystal structure of 1·CH₂Cl₂ showed that the dimeric tellurium diimide ligand is N,N′-chelated to cobalt. The related reaction of Se(N^tBu)₂ and CoCl₂ affords a green product tentatively identified as a 1:1 adduct [CoCl₂{N,N′-Se(N^tBu)₂}] (CHN analysis). However, recrystallization from thf produces the ion-separated complex [Co₂(μ-Cl)₃{N,N′-Se(N^tBu)₂}₂(thf)₂][CoCl₃{NH₂(^tBu)}]·1½thf (2·1½thf), in which the monomeric selenium diimide ligand is N,N′-chelated to cobalt in the cation. A pathway for the formation of 2 from [CoCl₂{N,N′-Se(N^tBu)₂}] in thf is proposed.     

Excimer formation mechanism in gaseous krypton and Kr/N2 mixtures

A new approach for the understanding of the energy relaxation dynamics of excited atoms involving a long-lived molecular precursor is presented here for krypton. Excitation of the gas close to the 5s[3/2]₂ metastable atomic level (E _at. ?E _exc.<kT) is achieved with an intense VUV laser source (I ≈ 10¹² photon/pulse) realized by resonantly enhanced 4-wave mixing (2ω₁ + ω₂) in room temperature mercury vapor (N _Hg ≈ 10¹³ at./cm³). The decay of the II. continuum luminescence (145 nm) is studied. In the pressure range 200–500 mbar, decay rates depend linearly on pressure but have a negative zero-pressure intersect. We show here that this result can be understood as an effect of the exchange of energy between two different “reservoirs” of atomic (5s[3/2]₂) and molecular (1_g) nature, and can be an inherent peculiarity of the recombination kinetics of excited atoms with several product channels. The efficiency of the model is checked for the Kr/N₂ system. Rate constants for relaxation processes are determined in pure krypton and in Kr/N₂ mixtures.     

Synthesis and structure of diamine bis(phenolate) complexes containing the Ti(OEt)–O–Ti(OEt) function

Reaction of diamine-bis(phenol) ligands containing a mixture of N-methyl and N,N′-dimethyl-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine, H₂L¹ and H₂L³, with [Ti(OCHMe₂)₄ in absolute ethanol under reflux without exclusion of air and moisture gives [(L¹)Ti (OEt–O–Ti(OEt)(L¹)] (1). [(L³)Ti(OEt)–O–Ti(OEt)(L³)] (2) forms when the remaining solution containing [(L³)Ti(OEt)₂] (3) (characterised by X-ray crystallography) is hydrolysed with H₂O. For the N-methyl and N,N′-dimethyl ligand mixture H₂L² and H₂L⁴, which contain tert-butyl groups on the ortho-positions of the aryl rings, [(L²)Ti(OEt)–O–Ti(OEt)(L²)] (4) forms much more slowly and [(L⁴)Ti(OEt)₂] (5) does not hydrolyse when H₂O is added. When the N-protonated ligand N,N-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁵, is used, rapid hydrolysis to two isomers of [(L⁵)Ti(OEt–O–Ti(OEt)(L⁵)] (6) occurs without addition of water. For N,N-bis(2-hydroxy-3,5-di-tert-butylbenzyl)ethylenediamine, H₂L⁶, hydrolysis to [(L⁶)Ti(OEt)–O–Ti(OEt)(L⁶)] (7) occurs slowly when H₂O is added. For pendant NMe₂ ligand N,N-dimethyl-N′,N′-bis(2-hydroxy-3-methyl-5-tert-butylbenzyl)ethylenediamine, H₂L⁷, the hydrolysis reaction readily gives [(L⁷)Ti(OEt)–O–Ti(OEt)(L⁷)] (8) for which an X-ray crystal structure was obtained. The ortho-tert-butyl ligand derivative H₂L⁸ formed a complex analysing as [(L⁸)Ti(OEt)–O–Ti(OEt)(L⁸)] (9) which could not be studied further due to insolubility. Pendant pyridine ligand N-(2-pyridylmethyl)-N,N-bis(2′-hydroxy-3′-methyl-5′-tert-butylbenzyl)amine, H₂L⁹, apparently forms isomers of [(L⁹)Ti(OEt)–O–Ti(OEt)(L⁹)] and possibly [{(L⁹)Ti(O)}₂] from [(L⁹)Ti(OEt)₂] (10). The ortho-tert-butyl ligand derivative H₂L¹⁰ formed [(L¹⁰)Ti(OEt)–O–Ti(OEt)(L¹⁰)] (11) for which an X-ray crystal structure was obtained.     

Single-crystal electronic spectra of some quadrate chromium(III) complexes

Polarised electronic spectra of trans-[Cr(tmd)₂F₂](ClO₄), trans-[Cr(en)₂(dma)₂](ClO₄)₃, trans-[Cr(en)₂(dmf)Cl](ClO₄)₂ and trans-[Cr(en)₂(dmf)Br](ClO₄)₂ have been measured at 77 K (tmd = trimethylenediamine; dma = N,N-dimethylacetamide; dmf = N,N-dimethylformamide; en = ethylenediamine, pn = propylenediamine). The observed quartet bands have been given definitive quadrate assignments based on polarisation characteristics. The four-component quadrate quartet bands have been uncovered and assigned also in the unpolarised crystal spectrum of trans-[Cr(en)₂(dmf)₂](ClO₄)₃ at 77 K and the solution spectrum of trans-[Cr(en)(pn)F₂]⁺. The band maxima derived by gaussian analysis in these spectra have been fitted with the theoretical energy equations of d³ configuration in quadrate ligand fields including full configuration interaction. The ligand field parameters Dq, Dt, and Ds and the election correlation parameter, B, extracted by such a fitting, have been compared with those obtained for other similar systems earlier. The significance of the ligand field symmetry parameters and the translated angular overlap model parameters is discussed.     

Comparison of Nonheme Manganese- and Iron-Containing Flavone Synthase Mimics

Heme and nonheme-type flavone synthase enzymes, FS I and FS II are responsible for the synthesis of flavones, which play an important role in various biological processes, and have a wide range of biomedicinal properties including antitumor, antimalarial, and antioxidant activities. To get more insight into the mechanism of this curious enzyme reaction, nonheme structural and functional models were carried out by the use of mononuclear iron, [Fe^II(CDA-BPA*)]²⁺ (6) [CDA-BPA = N,N,N’,N’-tetrakis-(2-pyridylmethyl)-cyclohexanediamine], [Fe^II(CDA-BQA*)]²⁺ (5) [CDA-BQA = N,N,N’,N’-tetrakis-(2-quinolilmethyl)-cyclohexanediamine], [Fe^II(Bn-TPEN)(CH₃CN)]²⁺ (3) [Bn-TPEN = N-benzyl-N,N’,N’-tris(2-pyridylmethyl)-1,2-diaminoethane], [Fe^IV(O)(Bn-TPEN)]²⁺ (9), and manganese, [Mn^II(N4Py*)(CH₃CN)]²⁺ (2) [N4Py* = N,N-bis(2-pyridylmethyl)-1,2-di(2-pyridyl)ethylamine)], [Mn^II(Bn-TPEN)(CH₃CN)]²⁺ (4) complexes as catalysts, where the possible reactive intermediates, high-valent Fe^IV(O) and Mn^IV(O) are known and well characterised. The results of the catalytic and stoichiometric reactions showed that the ligand framework and the nature of the metal cofactor significantly influenced the reactivity of the catalyst and its intermediate. Comparing the reactions of [Fe^IV(O)(Bn-TPEN)]²⁺ (9) and [Mn^IV(O)(Bn-TPEN)]²⁺ (10) towards flavanone under the same conditions, a 3.5-fold difference in reaction rate was observed in favor of iron, and this value is three orders of magnitude higher than was observed for the previously published [Fe^IV(O)(N2Py2Q*)]²⁺ [N,N-bis(2-quinolylmethyl)-1,2-di(2-pyridyl)ethylamine] species.     

Mononuclear and dinuclear chiral vanadium(V) complexes with tridentate Schiff bases derived from R(−)-1,2-diaminopropane: Synthesis,structure, characterization and catalytic properties

A series of vanadium(V) complexes with unsymmetrical tridentate Schiff base ligands, obtained by the single condensation of R(−)-1,2-diaminopropane with salicylaldehyde and its derivatives, 2-hydroxy-1-naphthaldehyde, 2-hydroxyacetophenone, 1-hydroxy-2-acetonaphthone and 2-hydroxybenzophenone, were prepared. The complexes were characterized by elemental analysis and by their IR, CD, UV–Vis, 1D (¹H, ⁵¹V) and 2D (COSY, NOESY, gHSQC) NMR spectra. Crystal structures of the mononuclear complex {R(−)-2-amino-1-N-[(2′-oxido-κO-4′,6′-dimethoxyphenyl)methylene]aminopropane-κ²N}dioxidovanadium(V), VO₂(C₁₂H₁₇N₂O₃), 4, and of the dinuclear complex, di-μ-oxido-bis({R(−)-2-[1-(2-aminopropylimino)ethyl]-4-methylphenolato-κ³N,N′,O}oxidovanadium(V)), V₂O₄(C₁₁H₁₅N₂O)₂, 5, have been obtained by X-ray diffraction studies. The structure of 4 was revealed to be a distorted trigonal–bipyramidal coordination geometry, rarely encountered in VO₂(tridentate Schiff base) complexes. Complexes 2 and 3 have the ability to catalyze the oxidation of prochiral sulfide substrates PhSR (R = Me, Bz) utilizing hydrogen peroxide or cumene hydroperoxide (CHPO) as the oxidant.