Rapid cyanation of aryl iodides in water using microwave promotion

We show that using water in conjunction with microwave heating it is possible to prepare aryl nitriles from the corresponding aryl iodides rapidly and in high yield without the need for a palladium catalyst.     

Direct conversion of aryl halides to phenols using high-temperature or near-critical water and microwave heating

The direct conversion of aryl halides to the corresponding phenols has been achieved using microwave heating. High-temperature or near-critical water is used as the solvent in conjunction with a copper catalyst and a mineral base.     

Microwave-promoted organic synthesis using ionic liquids: a mini review

Due to their extraordinary properties, such as the ionic composition, good thermal stability, low vapor pressure, and solution interactions, ionic liquids can be used as solvents, reagents, and heating aids in conjunction with microwave chemistry. Synthesis of diverse molecules can be improved with the use of the ionic liquids assisted microwave heating due to fast reaction times, simple reaction work-up, and catalyst recovery. This mini-review outlines this newly emerging field.     

Rapid and amenable suzuki coupling reaction in water using microwave and conventional heating

It is possible to prepare biaryls in good yield very rapidy (5-10 min) on small (1 mmol) and larger (10-20 mmol) scales from aryl halides and phenylboronic acid using water as a solvent and palladium acetate as catalyst. The reaction can be performed equally well using microwave and conventional heating, showing that using these conditions probably no nonthermal microwave effects are associated with the impressive speed of the reaction.     

Polymer-supported ionic-liquid-like phases (SILLPs): transferring ionic liquid properties to polymeric matrices

The physico-chemical properties of polymers with ionic-liquid-like moieties covalently bound to their surfaces (SILLPs) have been studied by thermal and spectroscopic techniques, as well as by direct impedance and dielectric measurements, and compared to those of the corresponding bulk ionic liquids. The effective transfer of properties from ionic liquids in solution to the supported species has thereby been demonstrated. The effects of the chemical nature of these tunable "solid solvents" on their macroscopic swelling and microwave heating, as well as the stabilities and activities of different catalytic moieties immobilized on the SILLPs, have been studied. Finally, the experimental effect observed in microwave heating can be directly correlated with the values of tan δ derived from dielectric measurements.     

Synthesis of aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(3,3′-bis indolyl)methanes promoted by secondary amine based ionic liquids and microwave irradiation

Aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(bis-3,3′-indolyl)methanes are synthesized in high yield using ionic liquids mediated by microwave. Reaction conditions and product recovery are simple and ionic liquids could be recycled.     

Suzuki coupling of aryl chlorides with phenylboronic acid in water, using microwave heating with simultaneous cooling

[reaction: see text]. We present here a methodology for the Suzuki coupling of aryl chlorides with phenylboronic acid using Pd/C as a catalyst, water as a solvent, and microwave heating. We show that simultaneous cooling in conjunction with microwave heating prolongs the lifetime of the aryl chloride substrates during the course of the reaction and, as a result, yields of the desired biaryl as well as overall recovery of material can be increased.     

Synthesis of diaryl ethers through the copper-catalyzed arylation of phenols with aryl halides using microwave heating

The copper-catalyzed arylation of phenols with a variety of aryl halides using microwave heating is described.     

Remarkable regioselectivity in microwave-enhanced palladium-catalyzed allylation reaction involving allyltrifluoroborates and aryl halides

An unprecedented cross-coupling reaction of potassium allyltrifluoroborates and aryl halides to the corresponding trans-β-methylstyrenes in the presence of PdCl₂(d^tbpf) catalyst under microwave heating was developed.     

Microwave‐assisted Ionothermal Synthesis and Characterization of Zeolitic Imidazolate Framework‐8

The zeolitic imidazolate framework‐8 (ZIF‐8) was successfully synthesized using ionic liquids as structure‐directing agent under microwave irradiation. Ionic liquids are green solvents with low vapour pressure and good thermal stability. They are appropriate templates for microporous materials and ideal microwave absorbers. The microwave‐assisted ionothermal synthesis applied in this paper was expected to be a promising method for the preparation of microporous materials. Results showed that the as‐synthesized samples (300–500 nm in diameter) could be synthesized in a short time (60 min) and possessed regular morphology, stable structure and high thermal stability (up to 720°C in argon atmosphere). Nitrogen adsorption‐desorption test illustrated that samples produced by microwave heating had a higher surface area. Carbon dioxide adsorption test indicated that the samples synthesized by microwave heating had better carbon dioxide adsorption ability than those by conventional heating.     

Fast microwave-assisted preparation of aryl and vinyl nitriles and the corresponding tetrazoles from organo-halides

Aryl and vinyl nitriles have been prepared in very high yields from the corresponding bromides using palladium-catalyzed reactions with microwave irradiation employed as the energy source. Furthermore, flash heating was used successfully for the conversion of these nitriles into aryl and vinyl tetrazoles by cycloaddition reactions. One-pot transformation of aryl halides directly to the aryl tetrazoles could be accomplished both in solution and on solid support. All reactions were completed in minutes rather than in hours or days as previously reported with the standard thermal heating technique. A very potent HIV-1 protease inhibitor (K(i) = 0. 56 nM), comprising two tetrazole heterocycles as carboxyl group bioisosteres, was prepared in one pot by microwave-promoted cyanation of a bromo precursor and a subsequent cycloaddition reaction. The temperature-time profiles at 13, 20, and 60 W magnetron input power in DMF are presented.     

One pot direct synthesis of β-ketoesters via carbonylation of aryl halides using cobalt carbonyl

A direct method for the synthesis of β-ketoesters from aryl halides (iodide, bromide) has been described by using cobalt carbonyl as carbon monoxide source in microwave irradiation. Using this protocol, a wide variety of substituted aryl halides has been successfully converted to corresponding β-ketoesters.     

Solvent free nucleophilic introduction of fluorine with [bmim][F]

1-n-Butyl-3-methylimidazolium fluoride ([bmim][F]) proved very efficient fluorinated reagent for nucleophilic substitution over sulfonate esters and alkyl halides. Preparation of the ionic liquid as well as its use as the reagent has been performed to be the more eco-friendly as possible. No organic solvent is needed for the fluoride introduction, reaction times are reduced by using microwave as the heating source, and the ionic liquids carefully recycled. Furthermore, no special care has to be taken as the presence of water in [bmim][F] was not deleterious to the transformation yield.     

A study of the ionic liquid mediated microwave heating of organic solvents

The use of ionic liquids as aids for microwave heating of nonpolar solvents has been investigated. We show that hexane and toluene together with solvents such as THF and dioxane can be heated way above their boiling point in sealed vessels using a small quantity of an ionic liquid, thereby allowing them to be used as media for microwave-assisted chemistry. Using the appropriate ionic liquid, the heating can be performed with no contamination of the solvent. To show the applicability of the system, two test reactions have been successfully performed.     

Highly regioselective internal heck arylation of hydroxyalkyl vinyl ethers by aryl halides in water

Highly regioselective and fast Pd(0)-catalyzed internal alpha-arylation of ethylene glycol vinyl ether with aryl halides was shown to be possible in water without the need for any halide scavengers or ionic liquid additives. This presents, to our knowledge, the first case of water being utilized in the selective arylation of electron-rich olefins. Resulting alpha-products were hydrolyzed and isolated as corresponding acetophenones in good to excellent yields when using aryl bromides and with good to moderate yields in the case of aryl iodides. Microwave irradiation was shown to be beneficial in activation of aryl chlorides toward the internal Heck arylation. The scope of the protocol was further increased to include different hydroxyalkyl vinyl ethers, these all giving selectively only branched alpha-products. Finally, the active role of the hydroxy group in directing the regioselectivity toward internal arylation of electron-rich olefins, even in nonpolar toluene, was revealed.     

Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Ionic liquid-promoted, highly regioselective Heck arylation of electron-rich olefins by aryl halides

Palladium-catalyzed regioselective Heck arylation of the electron-rich olefins, vinyl ethers 1a-d, enamides 1e-g, and allyltrimethylsilane 1h, has been accomplished in imidazolium ionic liquids with a wide range of aryl bromides and iodides instead of the commonly used, but commercially unavailable and expensive, aryl triflates. The reaction proceeded with high efficiency and remarkable regioselectivity without the need for costly or toxic halide scavengers, leading exclusively to substitution by aryl groups of diverse electronic and steric properties at the olefinic carbon alpha to the heteroatom of 1a-g and beta to the heteroatom of 1h. In contrast, the arylation reaction in molecular solvents led to mixtures of regioisomers under similar conditions. Several lines of evidence point to the unique regiocontrol stemming from the ionic environment provided by the ionic liquid that alters the reaction pathway. The chemistry provides a simple, effective method for preparing branched, arylated olefins and contributes to the extension of Heck reaction to a wider range of substrates.     

Arylzinc species by microwave assisted Grignard formation-transmetallation sequence: application in the Negishi coupling

Arylmagnesium species can be efficiently generated from magnesium turnings and aryl chlorides or aryl bromides under dielectric heating conditions. Subsequent microwave assisted transmetallation using ZnCl₂-TMEDA afforded the corresponding arylzinc reagents. A sequential microwave assisted arylmagnesium formation-transmetallation-Negishi coupling protocol suitable for automated multiple parallel synthesis has been developed.     

Copper-free palladium-catalyzed sonogashira-type coupling of aryl halides and 1-aryl-2-(trimethylsilyl)acetylenes

A one-pot procedure for the direct coupling of 1-aryl-2-trimethylsilylacetylenes with aryl halides to give diaryl acetylenes is reported. The procedure does not involve the use of copper(I) iodide. Improvement in reaction yields has been obtained by replacing conventional oil bath heating with the use of microwave dielectric heating.     

Study of CuI catalyzed coupling reactions of aryl bromides with imidazole and aliphatic amines under microwave dielectric heating

Amination of a variety of functionalized aryl bromides with imidazole and primary and secondary amines was accomplished using a CuI/amino acid catalyst system under microwave heating. Application of microwave irradiation shortened the reaction time from 25–40 h to 6–20 min. Good to very good yields of the corresponding coupling products were obtained when imidazole and secondary amines were used as starting materials. In case of primary amines, the outcome of the reaction was dependent on the character of the substituent on aryl bromide.