High‐ and low‐temperature phases in isostructural 4‐chloro‐3‐nitroaniline and 4‐iodo‐3‐nitroaniline

The structures of 4‐chloro‐3‐nitroaniline, C₆H₅ClN₂O₂, (I), and 4‐iodo‐3‐nitroaniline, C₆H₅IN₂O₂, (II), are isomorphs and both undergo continuous (second order) phase transitions at 237 and 200 K, respectively. The structures, as well as their phase transitions, have been studied by single‐crystal X‐ray diffraction, Raman spectroscopy and difference scanning calorimetry experiments. Both high‐temperature phases (293 K) show disorder of the nitro substituents, which are inclined towards the benzene‐ring planes at two different orientations. In the low‐temperature phases (120 K), both inclination angles are well maintained, while the disorder is removed. Concomitantly, the b axis doubles with respect to the room‐temperature cell. Each of the low‐temperature phases of (I) and (II) contains two pairs of independent molecules, where the molecules in each pair are related by noncrystallographic inversion centres. The molecules within each pair have the same absolute value of the inclination angle. The Flack parameter of the low‐temperature phases is very close to 0.5, indicating inversion twinning. This can be envisaged as stacking faults in the low‐temperature phases. It seems that competition between the primary amine–nitro N—H...O hydrogen bonds which form three‐centred hydrogen bonds is the reason for the disorder of the nitro groups, as well as for the phase transition in both (I) and (II). The backbones of the structures are formed by N—H...N hydrogen bonding of moderate strength which results in the graph‐set motif C(3). This graph‐set motif forms a zigzag chain parallel to the monoclinic b axis and is maintained in both the high‐ and the low‐temperature structures. The primary amine groups are pyramidal, with similar geometric values in all four determinations. The high‐temperature phase of (II) has been described previously [Garden et al. (2004). Acta Cryst. C 60 , o328–o330].     

Small‐Angle X‐Ray Scattering and Near‐Infrared Vibrational Spectroscopy of Water Confined in Aerosol‐OT Reverse Micelles

The state of water confined in Aerosol‐OT–hydrocarbon–water reverse micelles with cyclohexane, n‐pentane, n‐octane, and n‐dodecane as apolar solvents is investigated by small‐angle X‐ray scattering and near‐infrared vibrational spectroscopy of the first overtone of the OH stretching mode of water. The experiments focus on water/AOT molecular ratios W₀=2–20, where water is strongly affected by the confinement and surface–water interactions. The pair‐distance distribution functions derived from the small‐angle scattering patterns allows a detailed characterization of the topology of these systems, and they indicate deviations from monodisperse, spherical water pools for some of these hydrocarbon systems. In contrast to a common assumption, the pool size does not scale linearly with W₀ in going from dry reverse micelles (W₀→0) to essentially bulk‐like water (W₀>20). The first overtone of the OH‐stretching vibration exhibits highly structured spectra, which reveal significant changes in the hydrogen bonding environment upon confinement. The spectra are rationalized by a core/shell model developed by Fayer and co‐workers. This model subdivides water into core water in the interior of the micelle and shell water close to the interface. Core water is modelled by the properties of bulk water, while the properties of shell water are taken to be those of water at W₀=2. The model allows the representation of the spectra at any hydration level as a linear combination of the spectra of core and shell water. Different approaches are critically reviewed and discussed as well.     

Syntheses,Structures, and Photophysical Properties of Two Coordination Polymers Based on 2,3‐Dioxo‐1,2,3,4‐tetrahydroquinoxaline‐6‐carboxylic Acid

Two complexes based on the ligand 1,4‐dihydro‐2,3‐quinoxalinedione, namely [Mn(H₂L)₂(H₂O)₂]_n ( 1 ) and {[Zn₂(H₂L)₂(tz)₂] · 5H₂O}_n ( 2 ) (H₃L = 2,3‐dioxo‐1,2,3,4‐tetrahydroquinoxaline‐6‐carboxylic acid, Htz = 1,2,4‐triazole) were hydrothermally synthesized and characterized by elemental analyses, IR spectroscopy, as well as single‐crystal and powder X‐ray diffraction. Complex 1 exhibited a 1D comb‐like chain formed by H₂L^– anions linking Mn^II ions, whereas complex 2 was a 2D layer‐like structure with square‐shaped windows and outstretched arms built by combination of H₂L^– and tz^– ligands with Zn^II ions. The adjacent chains or layers connected with each other by intermolecular hydrogen bonding and π–π stacking to further extend to a 3D supermolecular framework. In addition, the thermal stabilities, luminescence properties, and optical energy gap of 1 and 2 were investigated in detail.     

Structural Diversity in the Self‐assembly of Cd(II) Complexes Containing 2,6‐Dimethyl‐3,5‐dicyano‐4‐(4‐pyridyl)‐1,4‐dihydropyridine

The syntheses, structures and properties of the complexes [CdBr₂( L )₂·4H₂O]_n [ L = 2,6‐dimethyl‐3,5‐dicyano‐4‐(4‐pyridyl)‐1,4‐dihydropyridine], 1 and [Cd(SCN)₂( L )₂(H₂O)]_n, 2 , are reported. In polymeric complexes 1 — 2 , the L ligands bridge the metal centers through the pyrimidyl and cyano nitrogen atoms forming 1‐D double‐stranded chain and zigzag chain, respectively. The L ligands in complex 1 act as κ1, κ1‐bidentate bridging ligand, whereas the L ligands in complex 2 act as κ1‐monodentae and κ1, κ1‐bidentate bridging ligand. The molecules of these complexes are interlinked through various weak interactions that form the packed structure. All the complexes exhibit emissions which may be tentatively assigned as intraligand (IL) π→π* transitions.     

DFT Calculations,Spectroscopic Studies,Biological Activity and Non Linear Optical Properties (NLO) of Novel Ternary Cu(II)‐Chelates Derived from 5‐Acetyl‐4‐hydroxy‐2H‐1,3‐thiazinedione

New ternary Cu(II)‐chelates with the general formula [ML L′(H₂O)_x] (NO₃)_y x (H₂O), x = 0–2 and y = 0–1, (L) = 5‐acetyl‐4‐hydroxy‐2H‐1,3‐thiazine‐2,6(3H)‐dione with in the presence of a secondary ligand (L′) [N,O‐donor; 8 hydroxyquinoline or N,N‐donor; 1,10‐phenanthroline and diethethylendiamine]. Characterization of the synthesized complexes was established based on elemental analysis, molar conductance, magnetic susceptibility measurements, spectral (infrared, electronic, mass, ¹H‐NMR and ESR) as well as thermal gravimetric analysis (TGA). The complexes exhibited octahedral and square planer geometry. The antimicrobial activity for the studied complexes was tested for different kind of organisms. The geometrical and non‐linear optical parameters of the studied complexes 1–3 are investigated theoretically at the B3LYP/GENECP level of theory. The optimized geometries of the studied complexes are non‐planner as indicated from the dihedral angles. The natural charge population (core, valence and Rydberg), exact electronic configuration, total Lewis, and total non‐Lewis is computed and discussed in terms of natural bond orbitals (NBO) analysis. The calculated E_HOMO and E_LUMO energies at the same level of theory of the studied complexes were used to calculate the global properties; hardness (η), global softness (S), electrophilicity (ω) and electronegativity (χ). The total dipole moment (μ_tot), total and anisotropy of polarizability (? α ?), (Δα) and first hyperpolarizability (? β ?) values were calculated and compared with urea as a reference compound. From the values of the computed first hyperpolarizability (? β ?), the ligand and the studied complexes show promising optical properties.     

Synthesis of a new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxycarbonyl)aminobenzenesulfonamide and its copolymerization with N‐phenyl maleimide

The new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxy‐ carbonyl)aminobenzenesulfonamide (MPBAS) (M₁) is synthesized using sulfadiazine as parent compound. It could be homopolymerized and copolymerized with N‐phenyl maleimide (NPMI) (M₂) by radical mechanism using AIBN as initiator at 60 °C in dimethylformamide. The new monomer MPBAS and polymers were identified by IR, element analysis and ¹H NMR in detail. The monomer reactivity ratios in copolymerization were determined by YBR method, and r₁ (MPBAS) = 2.39 ± 0.05, r₂ (NPMI) = 0.33 ± 0.02. In the presence of ammonium formate, benzyloxycarbonyl groups could be broken fluently from MPBAS segments of copolymer by catalytic transfer hydrogenation, and the copolymer with sulfadiazine side groups are recovered. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2548–2554, 2000     

A One‐Pot Synthesis of 1,3‐Dihydro‐1,3,3‐tris(perfluoroalkyl)isobenzofuran‐1‐olates and Their Complete NMR Spectroscopic Analysis on the Basis of 1D and 2D Experiments

A convenient synthesis of the 1,3‐dihydro‐1,3,3‐tris(perfluoroalkyl)isobenzofuran‐1‐ols 3a , b was elaborated starting from commercially available phthaloyl dichloride and trimethyl(perfluoroalkyl)silanes (Me₃SiR_f) 1a , b (R_f=CF₃, C₂F₅) in the presence of a fluoride source (Schemes 1 and 3). In a reaction analogous to alkyl Grignard reagents, double chloride substitution by two perfluoroalkyl groups and subsequent addition of one perfluoroalkyl group with concomitant ring closure led to this new class of compounds (Scheme 2). The syntheses of the alcohols and some alcoholates, as well as of the corresponding trimethylsilyl ethers are described. A combination of special 1D and 2D NMR experiments allowed the assignment of all atoms of the new compounds. The solid‐state structure of 1,3‐dihydro‐1,3,3‐tris(trifluoromethyl)isobenzofuran‐1‐ol ( 3a ) was elucidated by X‐ray diffraction methods.     

A 2D Metal‐Organic Framework Based on 9‐(Pyridin‐4‐yl)‐9H‐carbazole‐3,6‐dicarboxylic Acid: Synthesis,Structure and Properties

A metal‐organic framework (MOF ) formulated as [Cd₂(μ₃‐L)₂(DMF )₄]•H₂O ( CdL ) [H₂L =9‐(pyridin‐4‐yl)‐ 9H ‐carbazole‐3,6‐dicarboxylic acid, DMF =N ,N ‐dimethylformamide] was synthesized under solvothermal condition. Crystal structural analysis reveals that CdL features the layered 2D framework with L^{2 −} ligands as 3‐connected nodes. The compound CdL emits blue‐violet light with the narrow emission peak and the emission maximum at 414 nm upon excitation at the maximum excitation wavelength of 340 nm. The compound CdL has a similar emission spectrum curve to the free H₂L ligand that indicates the emission of compound CdL should be originated from the coordinated L^{2 −} ligands.     

Syntheses,Characterization, and Electrochemical Lithium‐Ion Storage Properties of Two Cobalt(II) Coordination Polymers Containing 5‐Hydroxyisophthalic Acid and Bis‐benzoimidazole Ligands

Two cobalt(II) coordination polymers, namely {[Co(HO‐BDC)(bbe)] · (H₂O)}_n ( 1 ), and {[Co(O‐BDC)(bbp)] · (H₂O)}_n ( 2 ) (HO‐H₂BDC = 5‐hydroxyisophthalic acid, bbe = 1, 2‐bis(benzoimidazol‐2‐yl)ethane, and bbp = 1, 3‐bis(benzoimidazol‐2‐yl)propane) were synthesized under hydrothermal conditions, and characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction, and thermogravimetric analyses. Compound 1 is a 1D chain, whereas 2 is a (3, 3)‐connected 2D network with (6³) topology. These two 1D and 2D complexes are further connected by hydrogen bonds to form the 3D supramolecular architectures. The electrochemical lithium‐ion storage properties of the as‐made Co₃O₄ by calcination of 1 are investigated in detail.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Photo‐Fries Rearrangement of Carbazol‐2‐yl Sulfonates: Efficient Tool for the Introduction of Sulfonyl Groups into Polycyclic Aromatic Compounds

Systematic studies on the photo‐Fries rearrangement of different 9H‐carbazol‐2‐yl sulfonates 2 have shown that this type of conversion can be readily used for the preparative‐scale introduction of alkyl‐ or arylsulfonyl groups into polycyclic aromatic compounds under very mild conditions. A series of new 1‐sulfonyl‐ ( 3 ) or 3‐sulfonyl‐9H‐carbazoles ( 4 ) were prepared in medium‐to‐good yields, and characterized by UV/VIS, ¹H‐NMR, and ¹³C‐NMR spectroscopy, as well as by elemental analysis. Effects of irradiation wavelength, solvent polarity, presence or absence of O₂, and photosensitizers were studied in detail.     

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

Syntheses and Characterization of Three New Compounds Based on Terephthalate and 2‐(2‐Pyridin‐4‐yl‐vinyl)benzimidazole Ligands

Three new compounds based on H₂BDC and PyBImE [H₂BDC = 1,4‐benzenedicarboxylatic acid, PyBImE = 2‐(2‐pyridin‐4‐yl‐vinyl)benzimidazole], namely, [Co(PyBImE)(BDC)(H₂O)₂] ( 1 ), [Co(PyBImE)₂(HBDC)(BDC)_0.5] ( 2 ), and [(HPyBImE)⁺ · (BDC)²–_0.5 · (H₂BDC)_0.5] ( 3 ), were synthesized by hydrothermal methods and characterized by single‐crystal X‐ray diffraction. Compound 1 is a one‐dimensional chain bridged by terephthalate in a bis(monodentate) fashion. In the complex the nitrogen atom from N_BIm and the coordination water molecule complete the coordination sphere. In complex 2 , the dinuclear cobalt units are bridged by terephthalate in a bis(bidentate) fashion into a one‐dimensional chain, but different from complex 1 , the nitrogen atom from N_Py and the oxygen atom from hydrogenterephthalate complete the coordination sphere. Complex 3 is a co‐crystal with PyBImE and H₂BDC in a 1:1 ratio and the transfer of hydrogen atoms leads the complex into a salt. Interesting supramolecular structures are shown due to the hydrogen bonding as well as π ··· π interactions in the three complexes. Thermal and magnetic properties of 1 and 2 were also studied.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Effect of Medium Acidity and Photostability of 3‐(4‐Dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP): A New Green Emitting Laser Dye

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the effect of medium acidity and photoreactivity of 3‐(4‐dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP) has been investigated in dimethylformamide and in chloromethane solvents such as methylenechloride, chloroform and carbon tetrachloride. The dye solution (ca. 5×10⁻⁴ mol·L⁻¹ in DMF) gives a good laser emission in the range 470–560 nm with emission maximum at 515 nm upon pumping by nitrogen laser (λ_ex=337.1 nm). The laser parameters such as gain coefficient (α), emission cross section (δ_e) and half life energy (E_1/2) at maximum laser emission are also determined.     

pH Dependent Synthesis of Two Manganese Compounds based on 5‐(2‐Pyrimidyl)tetrazole‐1‐acetic Acid

Reactions of Hpymtza [Hpymtza = 5‐(2‐pyrimidyl)tetrazole‐1‐acetic acid] with MnCl₂ · 4H₂O under different pH conditions, afforded the complexes [Mn(pymtza)₂(H₂O)₄] ( 1 ) and [Mn₂(pymtza)₂Cl₂(EtOH)] · H₂O ( 2 ). The compounds were structurally characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. Compound 1 shows a mononuclear structure, whereas complex 2 has a 1D chain structure. In compound 1 , the pymtza ligand only acts in a monodentate manner to coordinate to one central Mn^II atom by one carboxylate atom, In 2 , pymtza acts as tetradentate ligand to connect three Mn^II ions. Compounds 1 and 2 display 3D networks by hydrogen bonding interactions. Furthermore, the luminescence properties of Hpymtza as well as compounds 1 and 2 were investigated at room temperature in the solid state.     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.     

A Highly Efficient Self‐Assembly of Responsive C2‐Cyclohexane‐Derived Gelators

The rational design and synthesis of a family of effective low‐molecular‐weight gelators (LMWGs) with a modular architecture based on a C₂‐1,4‐diamide cyclohexane core are reported. Due to the high symmetry, the gelators are initially well distributed in solution and no trapped aggregates are formed before the assembly is triggered. The subsequent self‐assembly process, which results in the formation of versatile gels, is highly efficient and can be triggered and tuned due to its remarkable dependence on the pH of solution. The assembly of different gelators is found to be closely related to the pK_a of the corresponding functional substituents on the LMWGs. Primary cell culture experiments reveal that the hydrogels made under physiological conditions are promising as potential tailor‐made microenvironments.     

Construction and photoluminescence properties of a three‐dimensional ZnII coordination network based on naphthalene‐1,4‐dicarboxylic acid and 1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene

In recent years, coordination polymers constructed from multidentate carboxylate and pyridyl ligands have attracted much attention because these ligands can adopt a rich variety of coordination modes and thus lead to the formation of crystalline products with intriguing structures and interesting properties. A new coordination polymer, namely poly[[μ₂‐1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene‐κ²N:N′](μ₃‐naphthalene‐1,4‐dicarboxylato‐κ⁴O¹,O^1′:O⁴:O^4′)zinc(II)], [Zn(C₁₂H₆O₄)(C₁₆H₁₄N₂)]_n, has been prepared by the self‐assembly of Zn(NO₃)₂·6H₂O, naphthalene‐1,4‐dicarboxylic acid (1,4‐H₂ndc) and 1,6‐bis(pyridin‐3‐yl)‐1,3,5‐hexatriene (3,3′‐bphte) under hydrothermal conditions. The title compound has been structurally characterized by IR spectroscopy, elemental analysis, powder X‐ray diffraction and single‐crystal X‐ray diffraction analysis. Each Zn^II ion is six‐coordinated by four O atoms from three 1,4‐ndc²⁻ ligands and by two N atoms from two 3,3′‐bphte ligands, forming a distorted octahedral ZnO₄N₂ coordination geometry. Pairs of Zn^II ions are linked by 1,4‐ndc²⁻ ligands, leading to the formation of a two‐dimensional square lattice ( sql ) layer extending in the ab plane. In the crystal, adjacent layers are further connected by 3,3′‐bphte bridges, generating a three‐dimensional architecture. From a topological viewpoint, if each dinuclear zinc unit is considered as a 6‐connected node and the 1,4‐ndc²⁻ and 3,3′‐bphte ligands are regarded as linkers, the structure can be simplified as a unique three‐dimensional 6‐connected framework with the point symbol 4⁴6¹⁰8. The thermal stability and solid‐state photoluminescence properties have also been investigated.     

A Theoretical Study of 1‐D and 2‐D Helium Lattices

One‐ and two‐dimensional (1‐D and 2‐D) helium lattices have been studied using ab initio RHF/6–31G** computations. Structural, physical and thermochemical properties have been calculated and analyzed for the 1‐D and 2‐D He_N lattices respectively up to N = 50 and N = 36. Asymptotic properties of the 1‐D He_N lattices are obtained by extrapolating N‐dependence properties to large values of N. Analysis of the results show that the bulk per‐atom interaction (binding) energies increase while the optimized interatomic distances (bond lengths) slightly decrease with the increase in size of the 1‐D He_N lattices and both reach their asymptotic values of 0.352 cm^?1 and 3.18775 Å, respectively. Between the square and hexagonal (packed) structures of the 2‐D He_N lattices, the latter is more favored. Extrapolated values of the calculated properties, including lattice parameter, binding and zero point energies, heat capacity, and entropy have also been calculated for both 1‐D and 2‐D He_N lattices. The surface densities for monolayer films of helium atoms with square and hexagonal configurations have been calculated to be respectively 9.84 × 10¹⁸ and 1.04 × 10¹⁹ helium atoms/cm² which are comparable to the experimental value of 2.4 × 10¹⁹ helium atom/m² well within the typical large and directional error bars of the experiments. Surface effects have been investigated by comparing the packed He_N2‐D lattices with the same value of N but with different geometries (arrangements). This comparison showed that the He_N lattices prefer arrangements with the smallest surface area.