共查询到19条相似文献,搜索用时 218 毫秒
1.
模板交联壳聚糖对Cu^2+,Ni^2+,Co^2+离子的吸附作用研究 总被引:11,自引:0,他引:11
用市售的壳聚糖在水介质中与Cu^2+生成络合物,用二醛处理进行交联,稀酸洗去Cu^2+离子,制得Cu^2+离子模板交联壳聚糖树脂。这种树脂在PH值5-6条件下对其模板离子Cu^2+离子有最大的吸附量,对过渡金属离子的吸附次序为Cu^2+〉Ni62+〉Co^2+。在酸性再生条件下不会发生软化和溶解,重复使用性能良好。 相似文献
2.
氮杂冠醚接枝壳聚糖的合成及其对金属离子的吸附性能 总被引:4,自引:0,他引:4
本文利用壳聚糖C2位上活泼的氨基先与苯醛反应制备成保护氨基的Schiff碱壳聚糖,再将含环氧基的氮杂冠醚接枝到壳聚糖的C6位上,制得含Schiff碱的氮杂冠醚壳聚糖,随后使其在一定条件下脱去苯甲醛,合成了一种含氮杂冠醚功能基的新型壳聚糖衍生物,研究了其重金属离子Pb^2+,Cu^2+、Cr^3+、Cd^2+的静态吸附性能。结果表明,该吸附剂对重金属离子具有较强的吸附能力,在Ph^2+、Cu^2+、 相似文献
3.
4.
采用缩聚反应,一步法合成了三乙烯四胺(TETA)型的非模板和以Cu(Ⅱ)离了为中心模板离子的高分子铜模板络合吸附剂。研究了类吸附剂在静态条件下对重金属离子Cu^2+,Ni^2+,Co^2+,Zn^2+和动态条件下对Cu^2+,Ni^2+的吸附选择性。结果表明,铜模板吸附剂比非模板吸附剂对重金属离子的吸附选择性显著提高。 相似文献
5.
用原子吸收光谱对痕量铬作价态分析 总被引:9,自引:0,他引:9
本文详细研究了鱼腥藻对Cr^3+和Cr^6+离子的选择吸附条件,发现Cr^3+的最佳吸附PH值为4-5;Cr^6+的最佳PH为7左右,一定量柠檬酸能抑制Cu^2+,Pb^2+及Cd^2+对Cr^6+的吸附干扰。建立了痕量铬的不同价态原子吸收分析方法;对金属离子与藻之间的吸附机理作了初步探讨。 相似文献
6.
7.
红外光谱法研究螯合树脂对金属离子的选择性:I.氨基膦酸型… 总被引:1,自引:0,他引:1
本文用KBr压片法测定了氨基膦酸脂NP-500、SL-467,SL-411的H型、Na型以及分别吸附了Cu^2+,Ni^2+,Co^2+离子后的荭外光谱图。谱图分析发现,在相同的吸附条件下,同一种树脂分别吸附了Cu^2+,Ni^2+,Co^2+后,其吸附量愈大,图中C-N-C谱峰的位移植越大,则树脂对该金属离子的选择性愈高。结果表明,NP-500,SL-467,SL-411树脂对过渡元素Cu^2+ 相似文献
8.
本文用等温动态吸附和程序升温脱附技术研究了NO与Cu-ZSM-5的相互作用,并根据还原预处理样品上NO吸、脱附循环的研究探讨了全过程样品所经历的氧化还原循环。在25℃等温吸附时,NO与Cu^+和/或Cu^0反应产生了N2、N2O和Cu^2+以及超晶格氧,同时在Cu^+上有许多可逆吸附的NO.NO吸附在Cu^2+上是稳定的。升高温度时,NO分为三种状态脱附,分别位于约100,180和400℃。后两种 相似文献
9.
10.
PAN—聚氨酯泡沫塑料富集ICP—AES同时测定天然水中铜锌镉锰… 总被引:5,自引:0,他引:5
研究了1-(2-吡啶偶氮)-2-萘酚(PAN)在聚氨酯泡沫塑料上的吸附特征,对Cu^2^+,Zn^2^+,Cd^2^+,Mn^2^+,Fe^2^+,Co^2^+和Pb^2^+7种离子的吸附性能,以及富集体积,流速,基体元素的影响。建立了PAN-聚氨酯泡塑料富集ICP-AES同时测定天然水样中上述7种元素的分析方法,获得满意结果。 相似文献
11.
壳聚糖-铝氧化物复合材料的制备、表征及吸附性能 总被引:2,自引:0,他引:2
以壳聚糖和异丙醇铝为原料通过化学键合法制备了壳聚糖-铝氧化物复合材料,通过FTIR、SEM、TG等方法对其进行了表征,考察了其对水溶液中Cu3+的吸附性能.结果表明,在制备的复合材料中,铝与壳聚糖发生了键合作用,无机铝氧化物均匀分散在壳聚糖中,复合材料的热稳定性得到显著提高;与壳聚糖及壳聚糖和Al2O3的混合材料相比,复合材料对Cu2+的吸附性能明显改善,其中吸附率比壳聚糖提高了13%,吸附量可达146mg/g. 相似文献
12.
Cu(Ⅱ)印迹壳聚糖交联多孔微球去除水溶液中金属离子 总被引:4,自引:0,他引:4
研究了以Cu2+为模板的壳聚糖交联多孔微球(Cu-CSCPM)对溶液中Cu2+的吸附性能,为该材料应用于去除废水、果蔬汁等有毒重金属铜离子提供理论基础。首先制备了Cu2+印迹壳聚糖交联多孔微球,并表征了微球的一些物理化学性质;其次采用静态吸附法研究了该微球对Cu2+的吸附行为。结果发现,制得的微球表面多孔,含有活性-NH2,其含水量为69.59%,树脂骨架密度为1.22g/cm3,孔度值为73.68%,交联度为82.42%。初始浓度为60mmol/L、吸附温度40℃、pH=4.0时,Cu-CSCPM对Cu2+的饱和吸附容量为1.89mmol/g。Cu-CSCPM再生5次对Cu2+仍然具有较高吸附容量。 相似文献
13.
苯基硫脲接枝壳聚糖的合成及其对金属离子吸附性能的研究 总被引:10,自引:1,他引:9
苯基硫脲与经氨基保护的Schiff碱壳聚糖进行接枝反应,合成了一种对金属离子具有优良螯合性能的苯基硫脲壳聚糖。主要中间体和目标产物经IR光图谱分析表征与预期结构一致,并研究了目标产物对Cr^6 ,Cu^2 的吸附性能。 相似文献
14.
15.
用苯甲醛保护胺基后,将2-氨基-5-巯基-1,3,4-噻二唑引入到大孔壳聚糖微球上,合成了亲水性的多孔球状吸附树脂(CTS-AMT)。 对比研究了CTS-AMT和母体微球(CTS)对Zn2+、Cu2+、Cd2+、Pb2+、Ag+和Hg2+的吸附性能。 结果表明,pH=5.0,T=298.15 K时,CTS-AMT树脂对上述金属离子的吸附在1.5 h内基本达到平衡,对金属离子Hg2+、Ag+和Pb2+的静态饱和吸附量分别为2.54、2.31和1.71 mmol/g。 在实验浓度范围内该树脂对Hg2+的吸附过程符合 Langmuir等温吸附模型。 相似文献
16.
Macroporous chitosan layer coated on non-porous silica gel as a support for metal chelate affinity chromatographic adsorbent 总被引:4,自引:0,他引:4
A new immobilized metal affinity chromatography (IMAC) matrix was prepared by coordinating Cu2+ with cross-linked chitosan coated on non-porous silica gel (Cu-CTS-SiO2). Macroporous structure could be formed on the coated layer by imprinting polyethylene glycol (PEG) in chitosan film. The surface morphology changes on Cu-CTS-SiO2 bead prepared in different condition were confirmed by scanning electron microscopy (SEM). Effects of chitosan and PEG content in coating solution, the molecular mass of PEG on the surface macropore formation and adsorption capacity of bovine serum albumin (BSA) were investigated. Results indicated that coating solution with 2% chitosan and 10% PEG 20000 was optimal. Batch experiments were also conducted for elucidating the optimal pH, the adsorption isotherm and adsorption kinetics of BSA. Adsorption isotherm of trypsin on the same adsorbent was also performed. Results showed that the support itself had low non-specific interaction with both BSA and trypsin. The maximum adsorption capacity for BSA and trypsin on the prepared IMAC adsorbent could reach 192 mg and 5000 IU, respectively calculated by every gram of chitosan. The binding and eluting condition for BSA were tested on column filled with the adsorbent. Crude BSA sample could be purified on the IMAC column. 相似文献
17.
18.
表面印迹纳米磁性壳聚糖的制备及对Cu(Ⅱ)的吸附研究 总被引:5,自引:0,他引:5
将壳聚糖与自制的纳米四氧化三铁反应,加入一定量的铜盐使其与壳聚糖络合,再用环氧氯丙烷交联,用酸洗脱铜离子,得到表面印迹的纳米磁性壳聚糖.考察了阴离子、交联剂浓度对铜印迹效果的影响.用振动磁力仪及透射电镜对样品的性质进行表征.研究了表面印迹的纳米磁性壳聚糖对Cu2 的吸附性能.研究结果显示,用硝酸铜印迹制备的表面印迹纳米磁性壳聚糖吸附剂平均粒径为25nm,饱和磁化强度为98.56emu/g,壳聚糖含量为18.7%.吸附剂吸附容量大,吸附速度快.在Cu2 初始浓度为3.91mmol/L,pH为5时,15min即达到吸附平衡,以壳聚糖计Cu2 的饱和吸附量为4.07mmol/g,比纯壳聚糖粉高2倍.在含Zn2 或Cd2 、Pb2 的二元体系溶液中,离子印迹吸附剂对Cu2 具有明显的选择吸附性,而未印迹的纯壳聚糖粉几乎没有选择性.吸附剂易回收,重复使用性好,重复使用4次后,吸附量约保留最初饱和吸附量的98%. 相似文献
19.
Shao-Xiang Teng Shu-Guang Wang Xian-Wei Liu Wen-Xin Gong Xue-Fei Sun Jiang-Jie Cui Bao-Yu Gao 《Colloids and surfaces. A, Physicochemical and engineering aspects》2009,340(1-3):86-92
This study focused on the competitive adsorption of congo red (CR) and copper by chitosan hydrogel beads in a binary adsorption system. Spectroscopic analysis, including Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were integrated with kinetic studies to elucidate the interaction. It was determined that chitosan hydrogel beads show better adsorption performance towards congo red and copper in single adsorption systems. The addition of copper caused a 25% reduction in congo red adsorption capacity, while copper adsorption was enhanced slightly by the presence of congo red. The adsorption results for binary adsorption systems seem due to competition for the present amine and hydroxyl groups that may occur between congo red and copper. A congo red–copper complex was formed in binary adsorption systems. Copper attached to chitosan hydrogel beads individually or was bound by the congo red–copper complex, which resulted in an increase in adsorption capacity. Chitosan exhibited higher adsorption selectivity to the free Cu2+ ion than the congo red–copper complex in the binary adsorption system. Adsorption of the congo red–copper complex indicated an inhibition in the attachment of the free Cu2+ ion in the form of Cu(II). 相似文献