Anchoring the potential energy surface of the cyclic water trimer

Six cyclic stationary points on the water trimer potential energy surface have been fully optimized at the MP2 level with the aug-cc-pVQZ basis set. In agreement with previous work, harmonic vibrational frequencies indicate that two structures are minima, three are transition states connecting minima on the surface while the remaining stationary point is a higher-order saddle point. The 1- and n-particle limits of the electronic energies of each of these six structures were estimated by systematically varying both the basis sets and theoretical methods. The former limit was approached with the cc-pVXZ and aug-cc-pVXZ families of basis sets (X=2-7) while MP2, CCSD(T), and BD(TQ) calculations helped examine the latter. Core correlation effects have also been assessed at the MP2 level with the cc-pCVXZ series of basis sets (X=2-5). These data have been combined to provide highly accurate relative energies and dissociation energies for these stationary points.     

An ab initio benchmark study of hydrogen bonded formamide dimers

The five singly and doubly hydrogen bonded dimers of formamide are calculated at the correlated level by using resolution of identity M?ller-Plesset second-order perturbation theory (RIMP2) and the coupled cluster with singles, doubles, and perturbative triples [CCSD(T)] method. All structures are optimized with the Dunning aug-cc-pVTZ and aug-cc-pVQZ basis sets. The binding energies are extrapolated to the complete basis set (CBS) limit by using the aug-cc-pVXZ (X = D, T, Q) basis set series. The effect of extending the basis set to aug-cc-pV5Z on the geometries and binding energies is studied for the centrosymmetric doubly N-H...O bonded dimer FA1 and the doubly C-H...O bonded dimer FA5. The MP2 CBS limits range from -5.19 kcal/mol for FA5 to -14.80 kcal/mol for the FA1 dimer. The DeltaCCSD(T) corrections to the MP2 CBS limit binding energies calculated with the 6-31+G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets are mutually consistent to within < or =0.03 kcal/mol. The DeltaCCSD(T) correction increases the binding energy of the C-H...O bonded FA5 dimer by 0.4 kcal/mol or approximately 9% over the distance range +/-0.5 Angstrom relative to the potential minimum. This implies that the ubiquitous long-range C-H...O interactions in proteins are stronger than hitherto calculated.     

Ab initio calculations on halogen-bonded complexes and comparison with density functional methods

A systematic theoretical investigation on a series of dimeric complexes formed between some halocarbon molecules and electron donors has been carried out by employing both ab initio and density functional methods. Full geometry optimizations are performed at the Moller-Plesset second-order perturbation (MP2) level of theory with the Dunning's correlation-consistent basis set, aug-cc-pVDZ. Binding energies are extrapolated to the complete basis set (CBS) limit by means of two most commonly used extrapolation methods and the aug-cc-pVXZ (X = D, T, Q) basis sets series. The coupled cluster with single, double, and noniterative triple excitations [CCSD(T)] correction term, determined as a difference between CCSD(T) and MP2 binding energies, is estimated with the aug-cc-pVDZ basis set. In general, the inclusion of higher-order electron correlation effects leads to a repulsive correction with respect to those predicted at the MP2 level. The calculations described herein have shown that the CCSD(T) CBS limits yield binding energies with a range of -0.89 to -4.38 kcal/mol for the halogen-bonded complexes under study. The performance of several density functional theory (DFT) methods has been evaluated comparing the results with those obtained from MP2 and CCSD(T). It is shown that PBEKCIS, B97-1, and MPWLYP functionals provide accuracies close to the computationally very expensive ab initio methods.     

Approximations to complete basis set-extrapolated, highly correlated non-covalent interaction energies

The first-principles calculation of non-covalent (particularly dispersion) interactions between molecules is a considerable challenge. In this work we studied the binding energies for ten small non-covalently bonded dimers with several combinations of correlation methods (MP2, coupled-cluster single double, coupled-cluster single double (triple) (CCSD(T))), correlation-consistent basis sets (aug-cc-pVXZ, X = D, T, Q), two-point complete basis set energy extrapolations, and counterpoise corrections. For this work, complete basis set results were estimated from averaged counterpoise and non-counterpoise-corrected CCSD(T) binding energies obtained from extrapolations with aug-cc-pVQZ and aug-cc-pVTZ basis sets. It is demonstrated that, in almost all cases, binding energies converge more rapidly to the basis set limit by averaging the counterpoise and non-counterpoise corrected values than by using either counterpoise or non-counterpoise methods alone. Examination of the effect of basis set size and electron correlation shows that the triples contribution to the CCSD(T) binding energies is fairly constant with the basis set size, with a slight underestimation with CCSD(T)∕aug-cc-pVDZ compared to the value at the (estimated) complete basis set limit, and that contributions to the binding energies obtained by MP2 generally overestimate the analogous CCSD(T) contributions. Taking these factors together, we conclude that the binding energies for non-covalently bonded systems can be accurately determined using a composite method that combines CCSD(T)∕aug-cc-pVDZ with energy corrections obtained using basis set extrapolated MP2 (utilizing aug-cc-pVQZ and aug-cc-pVTZ basis sets), if all of the components are obtained by averaging the counterpoise and non-counterpoise energies. With such an approach, binding energies for the set of ten dimers are predicted with a mean absolute deviation of 0.02 kcal/mol, a maximum absolute deviation of 0.05 kcal/mol, and a mean percent absolute deviation of only 1.7%, relative to the (estimated) complete basis set CCSD(T) results. Use of this composite approach to an additional set of eight dimers gave binding energies to within 1% of previously published high-level data. It is also shown that binding within parallel and parallel-crossed conformations of naphthalene dimer is predicted by the composite approach to be 9% greater than that previously reported in the literature. The ability of some recently developed dispersion-corrected density-functional theory methods to predict the binding energies of the set of ten small dimers was also examined.     

Study of the structure, energetics, and vibrational properties of small ammonia clusters (NH3)n (n = 2-5) using correlated ab initio methods

Equilibrium geometries, interaction energies, and harmonic frequencies of (NH3)n isomers (n = 2-5) have been computed using correlated calculations (MP2) in conjunction with Dunning's aug-cc-pVXZ (X = D, T, Q) basis sets and the Counterpoise procedure. Whenever available, literature values for the binding energy and geometry of dimers and trimers agree well with our data. Low lying isomers for (NH3)4 and (NH3)5 have been found to have similar binding energies (roughly 16 and 20 kcal/mol for the tetramer and pentamer, respectively), perhaps suggesting the presence of a very smooth energy landscape. Using BSSE corrected forces or freezing the monomer structure to its gas phase geometry have been found to have only a weak impact on the energetic and structural properties of the clusters. The effect of zero-point energy (ZPE) on the relative stability of the clusters has been estimated using harmonic frequencies. The latter also highlighted the presence of vibrational fingerprints for the presence of double acceptor ammonia molecules. Many-body effects for (NH3)n isomers (n = 2-4) have been investigated to explore the possibility of building a pairwise interaction model for ammonia. In the frame of the work presented, we have found the 3-body effect to account for 10-15% of the total interaction energy, whereas the 4-body effects may be neglected as first approximation.     

Extrapolating to the one-electron basis-set limit in electronic structure calculations

A simple, yet reliable, scheme based on treating uniformly singlet-pair and triplet-pair interactions is suggested to extrapolate atomic and molecular electron correlation energies calculated at two basis-set levels of ab initio theory to the infinite one-electron basis-set limit. The novel dual-level method is first tested on extrapolating the full correlation in single-reference coupled-cluster singles and doubles energies for the closed-shell systems CH2((1)A1), H2O, HF, N2, CO, Ne, and F2 with correlation-consistent basis sets of the type cc-pVXZ (X=D,T,Q,5,6) reported by Klopper [Mol. Phys. 6, 481 (2001)] against his own benchmark calculations with large uncontracted basis sets obtained from explicit correlated singles and doubles coupled-cluster theory. Comparisons are also reported for the same data set but using both single-reference Moller-Plesset and coupled-cluster doubles methods. The results show a similar, often better, accordance with the target results than Klopper's extrapolations where singlet-pair and triplet-pair energies are extrapolated separately using the popular X(-3) and X(-5) dual-level laws, respectively. Applications to the extrapolation of the dynamical correlation in multireference configuration interaction calculations carried out anew for He, H2, HeH+, He2 ++, H3+(1 (1)A'), H3+(1 (3)A'), BH, CH, NH, OH, FH, B2, C2, N2, O2, F2, BO, CO, NO, BN, CN, SH, H2O, and NH3 with standard augmented correlation-consistent basis sets of the type aug-cc-pVXZ (X=D,T,Q,5,6) are also reported. Despite lacking accurate theoretical or experimental data for comparison in the case of most diatomic systems, the new method also shows in this case a good performance when judged from the results obtained with the traditional schemes which extrapolate using the two largest affordable basis sets. For the Hartree-Fock and complete-active space self-consistent field energies, a simple pragmatic extrapolation rule is examined whose results are shown to compare well with the ones obtained from the best reported schemes.     

Hydrogen bonding in substituted formic acid dimers

The hydrogen-bonded dimers of formic acid derivatives XCOOH (X = H, F, Cl, and CH3) have been investigated using density functional theory (B3LYP) and second-order M?ller-Plesset perturbation (MP2) methods, with the geometry optimization carried out using 6-311++G(2d,2p) basis set. The dimerization energies calculated using aug-cc-pVXZ (with X = D and T) basis have been extrapolated to infinite basis set limit using the standard methodology. The results indicate that the fluorine-substituted formic acid dimer is the most stable one in comparison to the others. Topological analysis carried out using Bader's atoms in molecules (AIM) theory shows good correlation of the values of electron density and its Laplacian at the bond critical points (BCP) with the hydrogen bond length in the dimers. Natural bond orbital (NBO) analysis carried out to study the charge transfer from the proton acceptor to the antibonding orbital of the X-H bond in the complexes reveals that most of the dimers are associated with conventional H-bonding except a few, where improper blue-shifting hydrogen bonds are found to be present.     

True stabilization energies for the optimal planar hydrogen-bonded and stacked structures of guanine...cytosine, adenine...thymine, and their 9- and 1-methyl derivatives: complete basis set calculations at the MP2 and CCSD(T) levels and comparison with experiment

Planar H-bonded and stacked structures of guanine...cytosine (G.C), adenine...thymine (A...T), 9-methylguanine...1-methylcytosine (mG...mC), and 9-methyladenine...1-methylthymine (mA...mT) were optimized at the RI-MP2 level using the TZVPP ([5s3p2d1f/3s2p1d]) basis set. Planar H-bonded structures of G...C, mG...mC, and A...T correspond to the Watson-Crick (WC) arrangement, in contrast to mA...mT for which the Hoogsteen (H) structure is found. Stabilization energies for all structures were determined as the sum of the complete basis set limit of MP2 energies and a (DeltaE(CCSD(T)) - DeltaE(MP2)) correction term evaluated with the cc-pVDZ(0.25,0.15) basis set. The complete basis set limit of MP2 energies was determined by two-point extrapolation using the aug-cc-pVXZ basis sets for X = D and T and X = T and Q. This procedure is required since the convergency of the MP2 interaction energy for the present complexes is rather slow, and it is thus important to include the extrapolation to the complete basis set limit. For the MP2/aug-cc-pVQZ level of theory, stabilization energies for all complexes studied are already very close to the complete basis set limit. The much cheaper D-->T extrapolation provided a complete basis set limit close (by less than 0.7 kcal/mol) to the more accurate T-->Q term, and the D-->T extrapolation can be recommended for evaluation of complete basis set limits of more extended complexes (e.g. larger motifs of DNA). The convergency of the (DeltaE(CCSD(T)) - DeltaE(MP2)) term is known to be faster than that of the MP2 or CCSD(T) correlation energy itself, and the cc-pVDZ(0.25,0.15) basis set provides reasonable values for planar H-bonded as well as stacked structures. Inclusion of the CCSD(T) correction is essential for obtaining reliable relative values for planar H-bonding and stacking interactions; neglecting the CCSD(T) correction results in very considerable errors between 2.5 and 3.4 kcal/mol. Final stabilization energies (kcal/mol) for the base pairs studied are very substantial (A...T WC, 15.4; mA...mT H, 16.3; A...T stacked, 11.6; mA...mT stacked, 13.1; G...C WC, 28.8; mG...mC WC, 28.5; G...C stacked, 16.9; mG...mC stacked, 18.0), much larger than published previously. On the basis of comparison with experimental data, we conclude that our values represent the lower boundary of the true stabilization energies. On the basis of error analysis, we expect the present H-bonding energies to be fairly close to the true values, while stacked energies are still expected to be about 10% too low. The stacking energy for the mG...mC pair is considerably lower than the respective H-bonding energy, but it is larger than the mA...mT H-bonding energy. This conclusion could significantly change the present view on the importance of specific H-bonding interactions and nonspecific stacking interactions in nature, for instance, in DNA. Present stabilization energies for H-bonding and stacking energies represent the most accurate and reliable values and can be considered as new reference data.     

Toward true DNA base-stacking energies: MP2, CCSD(T), and complete basis set calculations

Stacking energies in low-energy geometries of pyrimidine, uracil, cytosine, and guanine homodimers were determined by the MP2 and CCSD(T) calculations utilizing a wide range of split-valence, correlation-consistent, and bond-functions basis sets. Complete basis set MP2 (CBS MP2) stacking energies extrapolated using aug-cc-pVXZ (X = D, T, and for pyrimidine dimer Q) basis sets equal to -5.3, -12.3, and -11.2 kcal/mol for the first three dimers, respectively. Higher-order correlation corrections estimated as the difference between MP2 and CCSD(T) stacking energies amount to 2.0, 0.7, and 0.9 kcal/mol and lead to final estimates of the genuine stacking energies for the three dimers of -3.4, -11.6, and -10.4 kcal/mol. The CBS MP2 stacking-energy estimate for guanine dimer (-14.8 kcal/mol) was based on the 6-31G(0.25) and aug-cc-pVDZ calculations. This simplified extrapolation can be routinely used with a meaningful accuracy around 1 kcal/mol for large aromatic stacking clusters. The final estimate of the guanine stacking energy after the CCSD(T) correction amounts to -12.9 kcal/mol. The MP2/6-31G(0.25) method previously used as the standard level to calculate aromatic stacking in hundreds of geometries of nucleobase dimers systematically underestimates the base stacking by ca. 1.0-2.5 kcal/mol per stacked dimer, covering 75-90% of the intermolecular correlation stabilization. We suggest that this correction is to be considered in calibration of force fields and other cheaper computational methods. The quality of the MP2/6-31G(0.25) predictions is nevertheless considerably better than suggested on the basis of monomer polarizability calculations. Fast and very accurate estimates of the MP2 aromatic stacking energies can be achieved using the RI-MP2 method. The CBS MP2 calculations and the CCSD(T) correction, when taken together, bring only marginal changes to the relative stability of H-bonded and stacked base pairs, with a slight shift of ca. 1 kcal/mol in favor of H-bonding. We suggest that the present values are very close to ultimate predictions of the strength of aromatic base stacking of DNA and RNA bases.     

Accurate ab initio binding energies of alkaline earth metal clusters

The effects of basis set superposition error (BSSE) and core-correlation on the electronic binding energies of alkaline earth metal clusters Y(n) (Y = Be, Mg, Ca; n = 2-4) at the Moller-Plesset second-order perturbation theory (MP2) and the single and double coupled cluster method with perturbative triples correction (CCSD(T)) levels are examined using the correlation consistent basis sets cc-pVXZ and cc-pCVXZ (X = D, T, Q, 5). It is found that, while BSSE has a negligible effect for valence-electron-only-correlated calculations for most basis sets, its magnitude becomes more pronounced for all-electron-correlated calculations, including core electrons. By utilizing the negligible effect of BSSE on the binding energies for valence-electron-only-correlated calculations, in combination with the negligible core-correlation effect at the CCSD(T) level, accurate binding energies of these clusters up to pentamers (octamers in the case of the Be clusters) are estimated via the basis set extrapolation of ab initio CCSD(T) correlation energies of the monomer and cluster with only the cc-pVDZ and cc-pVTZ sets, using the basis set and correlation-dependent extrapolation formula recently devised. A comparison between the CCSD(T) and density functional theory (DFT) binding energies is made to identify the most appropriate DFT method for the study of these clusters.     

DNA甲基化-非甲基化碱基间堆积作用的理论研究

运用二级Mфller-Plesset(MP2)理论方法和cc-pVDZ基组优化了6-甲基鸟嘌呤(O6-MethylG),4-甲基胸腺嘧啶(O4-MethylT)以及5-甲基胞嘧啶(C5-MethylC)与DNA碱基鸟嘌呤(G),腺嘌呤(A),胞嘧啶(C),胸腺嘧啶(T)之间的堆积构型.在MP2/aug-cc-pVXZ//MP2/cc-pVDZ(X=D,T)水平上,采用完全基组外推方法校正了堆积碱基对间的相互作用能,并用完全均衡校正法(CP)校正了基组重叠误差(BSSE).MP2计算结果表明,DNA碱基甲基化使得嘧啶-嘧啶、嘧啶-嘌呤堆积碱基间的平行旋转角发生明显改变,并使堆积碱基间的相互作用能增大.在MP2/cc-pVDZ计算级别上得到了各堆积碱基对的全电子波函数,并用分子中的原子理论(AIM)分析了堆积碱基对间的弱相互作用.AIM分析结果显示,甲基化增强了堆积碱基间的π-π作用,且甲基氢与相邻碱基间形成H2CH…X(X=O,N,CH3,NH2)等类型的氢键.甲基化损伤使碱基间重叠程度增大、π-π作用增强以及堆积碱基间形成多个氢键,是堆积作用能增加的主要原因.     

Ab initio and DFT studies on van der Waals trimers: the OCS.(CO2)2 complexes

Ab initio calculations [MP2, MP4SDTQ, and QCISD(T)] using different basis sets [6-31G(d,p), cc-pVXZ (X = D, T, Q), and aug-cc-pVDZ] and density functional theory [B3LYP/6-31G(d,p)] calculations were carried out to study the OCS.(CO2)2 van der Waals trimer. The DFT has proved inappropriate to the study of this type of systems where the dispersion forces are expected to play a relevant role. Three minima isomers (two noncyclic and one cyclic) were located and characterized. The most stable isomer exhibits a noncyclic barrel-like structure whose bond lengths, angles, rotational constants, and dipole moment agree quite well with the corresponding experimental values of the only structure observed in recent microwave spectroscopic studies. The energetic proximity of the three isomers, with stabilization energies of 1442, 1371, and 1307 cm-1, respectively, at the CBS-MP2/cc-pVXZ (X = D, T, Q) level, strongly suggests that the two unobserved structures should also be detected as in the case of the (CO2)3 trimer where both noncyclic and cyclic isomers have been reported to exist. The many-body symmetry-adapted perturbation theory is employed to analyze the nature of the interactions leading to the formation of the different structures. The three-body contributions are small and stabilizing for the two most stable structures and almost negligible for the cyclic isomer.     

The small planarization barriers for the amino group in the nucleic acid bases

The amino group in the nucleic acid bases frequently interacts with other bases or with other molecular systems. Thus any nonplanarity of the amino group may affect the molecular recognition of nucleic acids. Ab initio Hartree-Fock (HF) and second-order Moller-Plesset perturbation (MP2) levels of theory have been used to obtain the equilibrium geometries of the C(l) and C(s) structures for five common nucleic acid bases. The energy barriers between the C(l) and C(s) structures have also been predicted. A series of correlation consistent basis sets up to cc-pCVQZ and aug-cc-pVQZ has been used to systematically study the dependence of the amino group nonplanarity. The equilibrium geometries of the nucleic acid bases with an amino group, including adenine, guanine, and cytosine, are examined carefully. At the MP2 level of theory, larger basis sets decrease the extent of nonplanarity of the amino group, but the decrease slows down when the QZ basis sets are used, demonstrating the intrinsic property of nonplanarity for guanine. For adenine and cytosine the situation is less clear; as the HF limit is approached, these two structures become planar. Addition of core correlation effects or diffuse functions further decreases the degree of nucleic acid base nonplanarity, in comparison to the original cc-pVXZ (X=D, T, and Q) basis sets. The aug-cc-pVXZ basis shows smaller degrees of nonplanarity than the cc-pCVXZ sets. The aug-cc-pVXZ basis is less size dependent than the cc-pVXZ and cc-pCVXZ sets in the prediction of the amino-group-related bond angles and dihedral angles and energy barriers for adenine, guanine, and cytosine. The cc-pCVQZ and aug-cc-pVQZ MP2 results may be regarded as benchmark predictions for the five common bases. The predicted classical barriers to planarization are 0.02 (adenine), 0.74 (guanine), and 0.03(cytosine) kcal mol(-1).     

An ab initio study of the CO–N2 complex

The interaction energy and van der Waals intermolecule bond length of several structures of the CO–N₂ complex are calculated by the supermolecule CCSD(T) and MP4 methods using aug-cc-pVXZ (X=D,T,Q) basis sets extended by a set of midbond functions centered in the middle of the vdW bond. The most stable structures are found to be two distorted T-shaped configurations with the N atom pointing towards the C–O bond. This conclusion is compatible with the results of high-resolution infrared, microwave and millimeter studies.     

On the accuracy of explicitly correlated coupled-cluster interaction energies--have orbital results been beaten yet?

The basis set convergence of weak interaction energies for dimers of noble gases helium through krypton is studied for six variants of the explicitly correlated, frozen geminal coupled-cluster singles, doubles, and noniterative triples [CCSD(T)-F12] approach: the CCSD(T)-F12a, CCSD(T)-F12b, and CCSD(T)(F12*) methods with scaled and unscaled triples. These dimers were chosen because CCSD(T) complete-basis-set (CBS) limit benchmarks are available for them to a particularly high precision. The dependence of interaction energies on the auxiliary basis sets has been investigated and it was found that the default resolution-of-identity sets cc-pVXZ/JKFIT are far from adequate in this case. Overall, employing the explicitly correlated approach clearly speeds up the basis set convergence of CCSD(T) interaction energies, however, quite surprisingly, the improvement is not as large as the one achieved by a simple addition of bond functions to the orbital basis set. Bond functions substantially improve the CCSD(T)-F12 interaction energies as well. For small and moderate bases with bond functions, the accuracy delivered by the CCSD(T)-F12 approach cannot be matched by conventional CCSD(T). However, the latter method in the largest available bases still delivers the CBS limit to a better precision than CCSD(T)-F12 in the largest bases available for that approach. Our calculations suggest that the primary reason for the limited accuracy of the large-basis CCSD(T)-F12 treatment are the approximations made at the CCSD-F12 level and the non-explicitly correlated treatment of triples. In contrast, the explicitly correlated second-order Mo?ller-Plesset perturbation theory (MP2-F12) approach is able to pinpoint the complete-basis-set limit MP2 interaction energies of rare gas dimers to a better precision than conventional MP2. Finally, we report and analyze an unexpected failure of the CCSD(T)-F12 method to deliver the core-core and core-valence correlation corrections to interaction energies consistently and accurately.     

Intermolecular potentials of the methane dimer calculated with Møller-Plesset perturbation theory and density functional theory

We have calculated the intermolecular interaction potentials of the methane dimer at the minimum-energy D(3d) conformation using the Hartree-Fock (HF) self-consistent theory, the correlation-corrected second-order M?ller-Plesset (MP2) perturbation theory, and the density functional theory (DFT) with the Perdew-Wang (PW91) functional as the exchange or the correlation part. The HF calculations yield unbound potentials largely due to the exchange-repulsion interaction. In the MP2 calculations, the basis set effects on the repulsion exponent, the equilibrium bond length, the binding energy, and the asymptotic behavior of the calculated intermolecular potentials have been thoroughly studied. We have employed basis sets from the Slater-type orbitals fitted with Gaussian functions (STO-nG) (n=3-6) [Quantum Theory of Molecular and Solids: The Self-Consistent Field for Molecular and Solids (McGraw-Hill, New York, 1974), Vol. 4], Pople's medium size basis sets of Krishnan et al. [J. Chem. Phys. 72, 650 (1980)] [up to 6-311++G(3df,3pd)] to Dunning's correlation consistent basis sets [J. Chem. Phys. 90, 1007 (1989)] (cc-pVXZ and aug-cc-pVXZ) (X=D, T, and Q). With increasing basis size, the repulsion exponent and the equilibrium bond length converge at the 6-31G** basis set and the 6-311++G(2d,2p) basis set, respectively, while a large basis set (aug-cc-pVTZ) is required to converge the binding energy at a chemical accuracy (approximately 0.01 kcal/mol). Up to the largest basis set used, the asymptotic dispersion coefficient has not converged to the destined C6 value from molecular polarizability calculations. The slow convergence could indicate the inefficacy of using the MP2 calculations with Gaussian-type functions to model the asymptotic behavior. Both the basis set superposition error (BSSE) corrected and uncorrected results are presented to emphasize the importance of including such corrections. Only the BSSE corrected results systematically converge to the destined potential curve with increasing basis size. The DFT calculations generate a wide range of interaction patterns, from purely unbound to strongly bound, underestimating or overestimating the binding energy. The binding energy calculated using the PW91PW91 functional and the equilibrium bond length calculated using the PW91VP86 functional are close to the MP2 results at the basis set limit.     

Infinite-basis calculations of binding energies for the hydrogen bonded and stacked tetramers of formic acid and formamide and their use for validation of hybrid DFT and ab initio methods

Benchmark stabilization energies for planar H-bonded and stacked structures of formic acid tetramers and formamide tetramers were determined as the sum of the infinite basis set limit of MP2 energies and a CCSD(T) correction term evaluated with the 6-31G*(0.25) basis set. The infinite basis (IB) set limit of MP2 energies was determined by two-point extrapolation using the aug-cc-pVXZ basis sets for X = D and T and separate extrapolation of the Hartree-Fock and correlation energies with new IB parameters for augmented basis sets determined here. Final stabilization energies (kcal/mol) for the tetramer studied are in the range of 4.6 to approximately 6.7 kcal/mol and they were used as reference data to test 14 density functionals. Among the tested DFT methods, PWB6K gives the best performance with an average error equal to only 30% of the average binding energy. In contrast, the popular B3LYP functional has an average error of 85%. We recommend the PWB6K method for exploring the potential energy surfaces of organic complexes and clusters and supramolecular assemblies.     

Stabilisation energy of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, I, CN) complexes: complete basis set limit calculations at MP2 and CCSD(T) levels

Stabilisation energies of stacked structures of C(6)H(6)...C(6)X(6) (X = F, Cl, Br, CN) complexes were determined at the CCSD(T) complete basis set (CBS) limit level. These energies were constructed from MP2/CBS stabilisation energies and a CCSD(T) correction term determined with a medium basis set (6-31G**). The former energies were extrapolated using the two-point formula of Helgaker et al. from aug-cc-pVDZ and aug-cc-pVTZ Hartree-Fock energies and MP2 correlation energies. The CCSD(T) correction term is systematically repulsive. The final CCSD(T)/CBS stabilisation energies are large, considerably larger than previously calculated and increase in the series as follows: hexafluorobenzene (6.3 kcal mol(-1)), hexachlorobenzene (8.8 kcal mol(-1)), hexabromobenzene (8.1 kcal mol(-1)) and hexacyanobenzene (11.0 kcal mol(-1)). MP2/SDD** relativistic calculations performed for all complexes mentioned and also for benzene[dot dot dot]hexaiodobenzene have clearly shown that due to relativistic effects the stabilisation energy of the hexaiodobenzene complex is lower than that of hexabromobenzene complex. The decomposition of the total interaction energy to physically defined energy components was made by using the symmetry adapted perturbation treatment (SAPT). The main stabilisation contribution for all complexes investigated is due to London dispersion energy, with the induction term being smaller. Electrostatic and induction terms which are attractive are compensated by their exchange counterparts. The stacked motif in the complexes studied is very stable and might thus be valuable as a supramolecular synthon.